Resultados de investigación

Vídeo muestra I-KRAFT-4 reutilización. Adjunto de la Tesis Doctoral titulada: "Formulación de ionogeles e hidrogeles de celulosa procedente del fraccionamiento de la madera y su aplicación en la impresión 3D" de Cynthia Hopson.

To regulate the degradation rate and improve the surface biocompatibility of the AZ31B magnesium alloy, three different coating systems were produced via plasma electrolytic oxidation (PEO): simple PEO, PEO incorporating multi-walled carbon nanotubes (PEO + CNT), and a duplex coating that included a polycaprolactone top layer (PEO + CNT/PCL). Surfaces were characterized by chemical content, roughness, topography, and wettability. Biological properties analysis included cell metabolism and adhesion. PEO ± CNT resulted in an augmented surface roughness compared with the base material (BM), while PCL deposition produced the smoothest surface. All surfaces had a contact angle below 90°. The exposure of gFib-TERT and bmMSC to culture media collected after 3 or 24 h did not affect their metabolism. A decrease in metabolic activity of 9% and 14% for bmMSC and of 14% and 29% for gFib-TERT was observed after 3 and 7 days, respectively. All cells died after 7 days of exposure to BM and after 15 days of exposure to coated surfaces. Saos-2 and gFib-TERT adhered poorly to BM, in contrast to bmMSC. All cells on PEO anchored into the pores with filopodia, exhibited tiny adhesion protrusions on PEO + CNT, and presented a web-like spreading with lamellipodia on PEO + CNT/PCL. The smooth and homogenous surface of the duplex PEO + CNT/PCL coating decreased magnesium corrosion and led to better biological functionality.

Vídeo donde se muestra la impresión 3D de una malla impresa a partir de la tinta T-IONO-4B. Asociado a la Tesis Doctoral titulada "Formulación de ionogeles e hidrogeles de celulosa procedente del fraccionamiento de la madera y su aplicación en la impresión 3D".

In the present work, a hybrid hierarchical coating (HHC) system comprising a plasma electrolytic oxidation (PEO) coating and a homogeneously porous structured polycaprolactone (PCL) top-coat layer, loaded with ciprofloxacin (CIP), was developed on Mg3Zn0.4Ca alloy. According to the findings, the HHC system avoided burst release and ensured gradual drug elution (64% over 240 h). The multi-level protection of the magnesium alloy is achieved through sealing of the PEO coating pores by the polymer layer and the inhibiting effect of CIP (up to 74%). The corrosion inhibition effect of HHC and the eluted drug is associated with the formation of insoluble CIP-Me (Mg/Ca) chelates that repair the defects in the HHC and impede the access of corrosive species as corroborated by FTIR spectra, EIS and SEM images after 24 h of immersion. Therefore, CIP participates in an active protection mechanism by interacting with cations coming through the damaged coating.

Vídeo-impresión 3D prisma triangular T-IONO-4B. Adjunto de la Tesis Doctoral titulada: "Formulación de ionogeles e hidrogeles de celulosa procedente del fraccionamiento de la madera y su aplicación en la impresión 3D" de Cynthia Hopson.

Vídeo impresión 3D prisma triangular T-KRAFT-4. Adjunto de la Tesis Doctoral titulada: "Formulación de ionogeles e hidrogeles de celulosa procedente del fraccionamiento de la madera y su aplicación en la impresión 3D" de Cynthia Hopson.

A hierarchical hybrid coating (HHC) comprising a ceramic oxide layer and two biodegradable polymeric (polycaprolactone, PCL) layers has been developed on Mg3Zn0.4Ca cast alloy in order to provide a controlled degradation rate and functionality by creating a favorable porous surface topography for cell adhesion. The inner, ceramic layer formed by plasma electrolytic oxidation (PEO) has been enriched in bioactive elements (Ca, P, Si). The intermediate PCL layer sealed the defect in the PEO layer and the outer microporous PCL layer loaded with the appropriate active molecule, thus providing drug-eluting capacity. Morphological, chemical, and biological characterizations of the manufactured coatings loaded with ciprofloxacin (CIP) and paracetamol (PAR) have been carried out. In vitro assays with cell lines relevant for cardiovascular implants and bone prosthesis (endothelial cells and premyoblasts) showed that the drug-loaded coating allows for cell proliferation and viability. The study of CIP and PAR cytotoxicity and release rate indicated that the porous PCL layer does not release concentrations detrimental to the cells. However, complete system assays revealed that corrosion behavior and increase of the pH negatively affects cell viability. H2 evolution during corrosion of Mg alloy substrate generates blisters in PCL layer that accelerate the corrosion locally in crevice microenvironment. A detailed mechanism of the system degradation is disclosed. The accelerated degradation of the developed system may present interest for its further adaptation to new cancer therapy strategies.

Electron microprobe and micro-Raman analysis of two samples collected in the Fe-Mn supergene enrichment zone of the Serra da Mina vein-hosted deposit, Iberian Pyrite Belt, SW Portugal. Data collected in the framework of a research project focusing on the paragenetic sequence of Mn oxides and the corresponding associated changes in physical-chemical conditions.