Pasar al contenido principal

Resultados de investigación

Rights
Projectcode
Resultados totales (Incluyendo duplicados): 39
Encontrada(s) 4 página(s)
RUO. Repositorio Institucional de la Universidad de Oviedo
oai:digibuo.uniovi.es:10651/79007
Datos de investigación Set de datos (Dataset)

Supplementary information for "Synthesis of spirolactones from carbonyls via carboborylation of N-sulfonylhydrazones with alkoxycarbonylalkylboronic acids"

  • López García, Lucía|||0000-0002-1407-2174
  • Filgueira Fernández, Sara|||0009-0009-6481-7750
  • Cabal Naves, Carmen María de la Paz|||0000-0002-8991-2385
  • Valdés Gómez, Alfonso Carlos|||0000-0002-6246-2994
Supplementary information for the article "Synthesis of spirolactones from carbonyls via carboborylation of N-sulfonylhydrazones with alkoxycarbonylalkylboronic acids". Advanced Synthesis and Catalysis, doi:10.1002/adsc.202500170. The data are contained in a word .docx file with the chemdraw and NMR data embebed. NMR data in mestrenova format can be retrieved from the file. A zip file containing all the NMR data is also provided., Financial support of this work by Ministerio de Ciencia e Innovación of Spain (Agencia Estatal de Investigación: grant MCINN-23-PID2022-140635NB-I00 financed by MCIN/AEI /10.13039/501100011033/FEDER, UE) and Agencia de Ciencia, Competitividad Empresarial e Innovación del Principado de Asturias (Sekuens): grant IDE/2024/000709.
RUO. Repositorio Institucional de la Universidad de Oviedo
oai:digibuo.uniovi.es:10651/76185
Datos de investigación Set de datos (Dataset)

Patch antennas characterization for enhanced microwave imaging

  • Álvarez López, Yuri|||0000-0003-3625-4515
  • Flórez Berdasco, Alicia
  • De Cos Gómez, Mª Elena
  • Laviada Martínez, Jaime
  • Las-Heras Andrés, Fernando
This dataset corresponds to the measurements of two microstrip patch antennas, collected using the facility described in [1]. The available measurements contained within the dataset allow a complete characterization of the field radiated by these antennas. These fields can be introduced in enhanced microwave imaging algorithms that consider the field radiated by the transmitting and receiving antennas of the microwave imaging system [2] (modified Delay and Sum algorithm), [3] (modified Phase Shift Migration imaging algorithm). The patch antennas that are characterized are the ones presented in [4]. The files "Emeas_leftPatch_z30cm.zip" and "Emeas_rightPatch_z30cm.zip", correspond to the copolar component (Ex component) of the electric field radiated by the patch antennas (left and right as depicted in the figure “PictureDataset.png”). More precisely, it corresponds to the S21 parameter, which is proportional to the electric field radiated by the patch antenna. Measurements were conducted within the frequency range from 22 GHz to 28 GHz, with a frequency step of 15 MHz. Measurements were collected on a domain of size Lx × Ly = 70 cm × 70 cm, discretized every δx,y = 5 mm (0.42 wavelengths at the center frequency of 25 GHz). The distance between the patch antenna (antenna under test) and the measurement plane was 30 cm. An Open-Ended Waveguide was used as probe antenna. The measured electric field was backpropagated from the measurement plane to the patch antenna aperture plane using the backpropagation algorithm described in [5]. The electric fields on the aperture plane are provided in the files “Eap_leftPatch.zip” and “Eap_rightPatch.zip” for the left and right patch antennas, respectively. The aperture fields were calculated on a planar domain having the same size as the measurement plane, that is, Lx × Ly = 70 cm × 70 cm, and also discretized every δx,y = 5 mm. [1] A. Arboleya, Y. Alvarez, and F. Las-Heras, “Millimeter and submillimeter planar measurement setup,” in 2013 IEEE Antennas and Propagation Society International Symposium (APSURSI), 2013, pp. 1–2. [2] Y. Alvarez Lopez and F. Las-Heras, “On the use of an equivalent currents-based technique to improve electromagnetic imaging,” IEEE Transactions on Instrumentation and Measurement, vol. 71, pp. 8004113, 2022. [3] Y. Alvarez López and F. Las-Heras Andrés, "Improved Methods for Fourier-based Microwave Imaging," Sensors, Vol. 23, pp. 9250, 2023. [4] A. F. Berdasco, J. Laviada, M. E. de Cos Gómez and F. Las-Heras, “Performance Evaluation of Millimeter-Wave Wearable Antennas for Electronic Travel Aid,” in IEEE Transactions on Instrumentation and Measurement, vol. 72, pp. 1-10, 2023, Art no. 4507510, doi: 10.1109/TIM.2023.3320736. [5] J. Hanfling, G. Borgiotti, and L. Kaplan, “The backward transform of the near field for reconstruction of aperture fields,” in 1979 Antennas and Prop. Society Intl. Symposium, vol. 17, 1979, pp. 764–767., Ministerio de Ciencia e Innovación of Spain, Agencia Estatal de Investigación of Spain, and Fondo Europeo de Desarrollo Regional (FEDER). Grant Number: PID2021-122697OB-I00 (“META-IMAGER”)
RUO. Repositorio Institucional de la Universidad de Oviedo
oai:digibuo.uniovi.es:10651/80598
Datos de investigación Set de datos (Dataset)

Data documentation for: Standardized mean difference effect sizes for interval-valued data. A distance-based approach.

  • Lubiano Gómez, María Asunción|||0000-0002-9847-5164
  • García García, José|||0000-0003-0991-1866
  • García Izquierdo, Antonio León
  • Castaño Pérez, Ana María|||0000-0003-1659-7625
R code and datasets associated with the original research article “Standardized mean difference effect sizes for interval-valued data. A distance-based approach. Journal of Mathematical Psychology. https://doi.org/10.1016/j.jmp.2025.102954” authored by Lubiano, M.A., García-García, J., García-Izquierdo, A.L., and Castaño, A.M., The research included in this paper has been partially supported by the Spanish State Research Agency Grants MINECO-PID2019-104486GB-I00 (García-García and Lubiano) and MCINN-22-TED2021-129283B-I00 (Castaño and García-Izquierdo), as well as the Principality of Asturias Grant SV-PA-21-AYUD/2021/50897 (García-García, García-Izquierdo and Lubiano), the Severo Ochoa-Principality of Asturias Grant PA-23-BP22-173 (García-García), and the Cátedra Asturias Prevención ref. CATI-04-2018 (Castaño and García-Izquierdo).
RUO. Repositorio Institucional de la Universidad de Oviedo
oai:digibuo.uniovi.es:10651/80817
Datos de investigación Set de datos (Dataset)

Dataset & code for : "A machine learning approach for estimating forage maize yield and quality in NW Spain"

  • García Cortés, Silverio
  • Menéndez Díaz, Agustín
  • Bande Castro, María José
  • Carballal Samalea, Alfonso
  • Martínez Fernández, Adela
  • Oliveira Prendes, José Alberto
The data file contains 1449 data for forage maize production covering 23 years from 2000 to 2022 and corresponds to 7 locations in NW of Spain (Grado, Barcia and Villaviciosa) in Asturias and (Ordes, Ribadeo, Sarria and Deza) in Galicia region., Dataset & code for : "A machine learning approach for estimating forage maize yield and quality in NW Spain"
RUO. Repositorio Institucional de la Universidad de Oviedo
oai:digibuo.uniovi.es:10651/80756
Datos de investigación Set de datos (Dataset)

Data Documentation for ‘Finite element analysis of the asymmetric ENF test specimen’

  • Bonhomme González, Jorge|||0000-0003-0363-6373
  • Mollón Sánchez, María Victoria|||0000-0002-4591-8494
The objective of this article is to investigate the asymmetric end notched flexure (AENF) test. The AENF test specimen consists of two sublaminates with different stiffnesses (dissimilar elastic properties and/or thicknesses). A key observation in this test is that AENF test specimens exhibit different fracture behaviour depending on their positioning in the test. Depending on the position of the stiffer sublaminate, ‘local contact’ or ‘global contact’ may occur along the cracked arms giving rise to different contact pressure distribution. This variation in the contact pressure distribution leads to different fracture behaviour at the crack tip: mixed-mode I/II or pure mode II. This work demonstrates that a straightforward experimental or numerical compliance calibration (CC) procedure can effectively determine the total energy release rate (ERR) in mixed-mode conditions (G=GI+GII) or the mode II component (GII) when pure mode II is present, depending on the positioning of the specimen. The criterion established by other authors under which the AENF test configuration exhibits pure mode II at the crack tip was also reviewed. In this case, analytical formulations developed by other authors were compared with the CC procedure and the virtual crack closure technique (VCCT). Finally, this article examines the influence of several test parameters on the mode mixity. These parameters include the specimen degree of asymmetry, the initial crack length, and the degree of the deformation applied during the test. The entire investigation was conducted using the finite element method (FEM)., This research received no external funding.
RUO. Repositorio Institucional de la Universidad de Oviedo
oai:digibuo.uniovi.es:10651/77114
Datos de investigación Set de datos (Dataset)

Enunciados y resoluciones de problemas de probabilidad diseñados por estudiantes para maestro.

  • Alonso Castaño, Marlen|||0000-0003-0648-7393
Este documento contiene una base de datos cualitativa de problemas de probabilidad diseñados y resueltos por Estudiantes para Maestro (EPM) del tercer curso del Grado en Maestro/a en Educación Primaria de la Universidad de Oviedo, con formación previa en los contenidos de estadística, probabilidad y resolución de problemas y su didáctica. El documento está estructurado en tres bloques, cada uno con un enunciado que varía en función de la naturaleza del estudio original. El objetivo de este estudio era analizar el conocimiento matemático para la enseñanza de los EPM a través de la creación y resolución de problemas de probabilidad dirigidos a un nivel educativo específico. La metodología utilizada fue la investigación-acción, un enfoque cíclico que implica planificar la investigación, recoger los datos, analizarlos y, a partir de las conclusiones obtenidas, reformular el instrumento de recogida para iniciar un nuevo ciclo con el instrumento modificado. Cada bloque corresponde a una de las tres iteraciones de investigación-acción realizadas durante el estudio, por lo que, al comienzo de cada uno de ellos, se presenta el instrumento utilizado en esa fase para la recogida de datos. Los datos han sido recogidos de manera anónima y se presentan en el formato original proporcionado por cada EPM (textual, tabular, imagen o una combinación de varios de esos formatos). Dado que reflejan el estado en el que fueron entregados, debe tenerse en cuenta que pueden contener faltas ortográficas, errores de formato o matemáticos, o estar incompletos.
RUO. Repositorio Institucional de la Universidad de Oviedo
oai:digibuo.uniovi.es:10651/80002
Datos de investigación Set de datos (Dataset)

Data from "Auxiliary ventilation systems in mining and tunnelling: Air leakage prediction and system design to optimize the energy efficiency and operation costs"

  • Menéndez, Javier
  • Fernández Oro, Jesús Manuel
  • Merlé, M.
  • Galdo Vega, Mónica
  • Álvarez de Prado, Laura
  • López, Cipriano
  • Bernardo-Sánchez, Antonio
RUO. Repositorio Institucional de la Universidad de Oviedo
oai:digibuo.uniovi.es:10651/79126
Datos de investigación Set de datos (Dataset)

Data documentation for: Impact of the phase change material (PCM) integration on the mortar’s thermal inertia: The role of the aggregates and PCM types

  • Álvarez Rodríguez, Matías|||0000-0003-2391-9733
  • Lopez-Arias, Marina
  • Velay-Lizancos, Mirian
  • Alonso Martínez, Mar
Dataset asociado a la publicación: "Impact of the phase change material (PCM) integration on the mortar’s thermal inertia: The role of the aggregates and PCM types", This work was supported by the Spain Ministry of Universities (FPU21/05062 and EST24/00362) and the Spain Ministry of Science and Innovation through Research Projects PID2021-128056OA-I00 and RED2022-134219-T.
RUO. Repositorio Institucional de la Universidad de Oviedo
oai:digibuo.uniovi.es:10651/80806
Datos de investigación Set de datos (Dataset)

El malestar con la alimentación. Percepciones, actitudes y comportamientos de la población española hacia una alimentación saludable, sostenible y justa

  • Díaz Méndez, Cecilia
  • Sánchez Jiménez, Sergio|||0000-0003-4041-8535
El proyecto SALMAFood aborda uno de los grandes retos contemporáneos a los que se enfrenta la alimentación en las sociedades actuales: la transformación hacia sistemas alimentarios más saludables, sostenibles y justos. A través de un enfoque interdisciplinar y multiactor, el equipo de investigación ha analizado el malestar ciudadano con la alimentación, los desafíos del sistema agroalimentario español y las propuestas de mejora impulsadas desde distintos sectores sociales. Los resultados de esta investigación permiten confirmar donde se encuentra los focos del malestar de la ciudadanía con el sistema alimentario, aunque también se ha visibilizado el bienestar que produce la comida. Esta dualidad ha sido posible al plantear un avance metodológico en el análisis del sistema alimentario, en el que se ha trabajado sobre los eslabones tradicionales (producción, industria, distribución y consumo) pero se ha añadido como elementos del sistema la preparación de los alimentos y la comensalidad, incorporando el hogar como espacio de análisis sobre la alimentación. Justificando teóricamente este aporte metodológico se ha confirmado un elevado y generalizado bienestar con la alimentación en el ámbito doméstico y también en la restauración. Los focos del malestar se sitúan en los agentes externos al hogar, los mediadores entre el comensal y el productor, siendo particularmente negativa la valoración que la ciudadanía hace de la transformación de los alimentos en la industria, aunque cabe destacar que esta insatisfacción está mediada por la gestión y la comensalidad domésticas. El proyecto ha permitido elaborar una tipología que representa las posiciones frente al bienestar y el malestar que produce el sistema alimentario español. Esta tipología describe los factores sociales que explican la actitud más crítica con el sistema alimentario, y presenta los grupos de población más conformistas y los más satisfechos con un sistema cuya fortaleza no está en los agentes intermediadores con el alimento, sino en aquellas esferas en las que la alimentación se hace propia y en espacios en los que se gestionan los riesgos que se le atribuyen a los eslabones mercantilizados del sistema alimentario. Pero esta tipología no solo se expresa a través de las condiciones estructurales de los individuaos relacionadas con la clase social (y esta es otra de las aportaciones del proyecto), sino con variables actitudinales, con disposiciones rutinizadas relacionadas con la cultura alimentaria, que explican las posiciones de la ciudadanía frente al sistema alimentario y que hemos denominado “posiciones alimentarias”. Este proyecto aporta un conocimiento de interés en la toma de decisiones en relación con las políticas alimentarias nacionales y permite anticipar dónde están los rechazos y dónde se sitúan las potencialidades para que el sistema alimentario español avance hacia un modelo alimentario más equitativo, resiliente y alineado con los objetivos de sostenibilidad., El malestar con la alimentación. Percepciones, actitudes y comportamientos de la población española hacia una alimentación saludable, sostenible y justa. PID2021-122721OB-C21
RUO. Repositorio Institucional de la Universidad de Oviedo
oai:digibuo.uniovi.es:10651/80278
Datos de investigación Set de datos (Dataset)

Python code and CFD data of a sensitivity analysis (Morris Method) and the optimization of an OWC turbine

  • Vega Valladares, Aitor|||0000-0002-3516-7252
  • García Díaz, Manuel
  • Pereiras García, Bruno|||0000-0002-1820-1711
  • Takao, Manabu
CFD data: CFD data related to the sensitivity analysis (Morris Method) and the optimization process. / Python code: Python code to import the Design Points associated with the sensitivity analysis (Morris Method) in ANSYS Workbench 23.2, Python code and CFD data associated with the Original Research Paper (ORP) entitled: "Multi-parametric optimization of a counter-rotating impulse turbine: A novel application of the Morris Method for Wave Energy Converters" authored by Aitor Vega-Valladares and co-authored by Manuel Garcia-Diaz, Bruno Pereiras and Manabu Takao. Aitor Vega-Valladares, Manuel Garcia-Diaz and Bruno Pereiras are members of the Fluids Engineering for Renewable Energy and Sustainability (FERES) research group, within the Department of Energy at the University of Oviedo. Professor Manabu Takao is a recognized expert in turbine design for Oscillating Water Column (OWC) devices from Matsue College in Japan. These datasets collect all the data used to prepare the ORP mentioned above, which arises as a collaboration between the aforementioned authors., At data collection date, Aitor Vega-Valladares was supported by the “Administración del Principado de Asturias” within the “Severo Ochoa” Program (grant number BP21-160).
Buscador avanzado