Pasar al contenido principal

Resultados de investigación

Rights
Projectcode
Resultados totales (Incluyendo duplicados): 13
Encontrada(s) 2 página(s)
Arias Montano. Repositorio Institucional de la Universidad de Huelva
oai:ariasmontano.uhu.es:10272/27858
Datos de investigación Set de datos (Dataset)

Exploring the effect of the pulp bleaching on the thermo-rheological behavior of sustainable cellulose nanofiber-based oleogels [Dataset]

  • Roman Fercheluc, Claudia
  • Delgado Canto, Miguel Ángel|||0000-0003-0573-7987
  • Fernández Silva, Samuel David|||0000-0001-6253-1497
  • García Morales, Moisés|||0000-0003-4153-487X
  • Roman Fercheluc, Claudia|||0000-0002-7960-5832
Taking advantage of the high thickening capacity of cellulose nanofibers in castor oil, sustainable lubricating oleogels were obtained. Methanol was used as mediator to transfer the nanofibers, originally present as a hydrogel, into the vegetable oil. The effect of the pulp bleaching on the oleogels’ thermo-rheological behavior was analyzed. Viscous flow curves and small/large amplitude dynamic shear tests were carried out on both bleached and unbleached samples of the same elm kraft pulp. Substantial differences were observed, above all when the oleogels were subjected to stress values beyond the onset of their linear viscoelastic regimes. The oleogel prepared with nanofibers from the unbleached pulp was found to endure large shear deformations better than that from the bleached pulp, and was less sensitive to temperature. Hence, the complex shear modulus (|G*|) corresponding to the oleogel based on 1.4 wt% bleached nanofiber decreased by 55.7% upon a non-linear stress of 200 Pa was applied for 30 min. However, a less severe structural breakdown, i.e., a decay in |G* | of 28.9% (half of the previous one), was monitored when the oleogel based on the unbleached nanofiber was submitted to the same testing conditions. It should also be underlined that such an oleogel showed an extraordinary capacity to recovery its structure after the large shear deformation process.
Arias Montano. Repositorio Institucional de la Universidad de Huelva
oai:ariasmontano.uhu.es:10272/28036
Datos de investigación Set de datos (Dataset)

From Students to Professionals: Digital Skills in Social Services for the Practice of Social Work [Dataset]

  • Gómez Rasco, Teresa
  • Muñoz Moreno, Rocío
  • Ferri Fuentevilla, Elena
  • Vázquez Aguado, Octavio|||0000-0002-7636-2724
  • Gómez Rasco, Teresa
Arias Montano. Repositorio Institucional de la Universidad de Huelva
oai:ariasmontano.uhu.es:10272/27897
Datos de investigación Set de datos (Dataset)

A sustainable methanol-based solvent exchange method to produce nanocellulose-based ecofriendly lubricants [Dataset]

  • Roman Fercheluc, Claudia
  • García Morales, Moisés|||0000-0003-4153-487X
  • Eugenio, María Eugenia
  • Ibarra, David
  • Delgado Cantó
  • Delgado Canto, Miguel Ángel|||0000-0003-0573-7987
  • Roman Fercheluc, Claudia|||0000-0002-7960-5832
A prospective methodology aimed to develop totally sustainable oleogels with potential application in lubrication is reported. Oleogels were prepared with cellulose nanofibrils from elm pulps in castor oil. Even at a concentration as low as 1.4 wt%, the oleogels showed rheological behaviors similar to a traditional lithium grease used as reference. In that sense, the high thickening power of cellulose nanofibers was remarked. Never-dried bleached and unbleached elm pulps were mechanically treated with PFI mill refiner and microfluidizer. Moreover, as an alternative way of producing cellulose nanofibrils, the never-dried bleached elm pulp was chemically oxidized using 2,2,6,6-tetramethylpiperidine-1-oxyl radical (TEMPO). The three types of nanofibers were characterized and used in the production of oleogels. The great challenge was to remove the high amount of water retained by the nanofibrils during the nanofibrillation treatment before it was ncorporated into the vegetable oil-based lubricant. Alternative strategies such as liophilization or drying failed because the nanofibers, with very high specific surface and strong capacity to interact among them by hydrogen bonding, underwent severe aggregation. Instead, the proposed methanol-based solvent exchange method enabled the transfer of the cellulose nanofibrils from the origin hydrogel to the vegetable oil with no detriment of both their aspect ratio and thickening capacity. Chemical considerations are provided with regard to such a solvent-mediated method, which yielded homogeneous and storage-stable oleogels. This work may attract the interest of lubricant manufacturers. to produce nanocellulose-based eco-lubricating greases for industrial application
Arias Montano. Repositorio Institucional de la Universidad de Huelva
oai:ariasmontano.uhu.es:10272/28097
Datos de investigación Set de datos (Dataset)

Diagnosis: revisión sistemática de torías, experiencias e investigaciones en Educación Patrimonial en Latinoamérica [Dataset]

  • Echeverri Ramos, Fabio Alonso
  • Martín Cáceres, Miriam José|||0000-0003-1199-3899
  • Estepa Giménez, Jesús|||0000-0002-6381-8331
Arias Montano. Repositorio Institucional de la Universidad de Huelva
oai:ariasmontano.uhu.es:10272/29049
Datos de investigación Set de datos (Dataset)

Optimization of a Solvent Exchange Method Enabling the Use of Dehydrated Cellulose Nanofibers as the Thickener in Lubricating Oleogels [Dataset]

  • García Pérez, María
  • Roman Fercheluc, Claudia|||0000-0002-7960-5832
  • Fernández Silva, Samuel David|||0000-0001-6253-1497
  • Delgado Canto, Miguel Ángel|||0000-0003-0573-7987
  • García Morales, Moisés|||0000-0003-4153-487X
This dataset reports the step‐by‐step preparation of sustainable oleogels based on commercial dry cellulose nanofibers in castor oil. Hydrogels were prepared prior to the oleogel formation for the sake of optimal dispersion and integration of the fibers into the oil. A methanol‐mediated solvent‐exchange method was used to transfer the nanofibers from hydrogel to oil. A set of 9 oleogels were studied under varying preparation routes, pH, methanol wash conditions and concentration. Linear viscoelastic moduli of selected oleogels were measured at 30 ºC. Visual inspection of the fibers dispersion at several stages of the process is included.
Arias Montano. Repositorio Institucional de la Universidad de Huelva
oai:ariasmontano.uhu.es:10272/27856
Datos de investigación Set de datos (Dataset)

Potential valorization of waste cooking oils into sustainable bio-lubricants [Dataset]

  • Fernández Silva, Samuel David|||0000-0001-6253-1497
  • Delgado Canto, Miguel Ángel|||0000-0003-0573-7987
  • Ruíz Méndez, María Victoria
  • Giráldez Díaz, Inmaculada|||0000-0002-6277-0161
  • García Morales, Moisés|||0000-0003-4153-487X
This work explores the feasibility of using waste cooking oils (WCO) as eco-lubricants. Five WCO from different food facilities were studied. Three of them were fractionated into both lighter and heavier fractions by molecular distillation. A comprehensive chemical characterization (fatty acids distribution, polar compounds and acidity) was carried out on all WCOs and their fractions, which led to set relationships with the oils’ properties (such as viscosity index, low temperature viscous flow behavior, oxidation resistance, etc.). It is worth mentioning the high viscosity index values found in waste cooking oils with both low total polar compounds and acidity level, as well as the benefit which acidity had on their fluidity at low temperature and their lubricity. Moreover, it was also noteworthy that the lighter fractions, merely constituted by free fatty acids (FFA), presented an improved oxidative resistance. The largest OOT enhancement, 12.4%, was found for the light fraction of a non-segregated oil. Moreover, a better thermal stability was shown by the heavier fractions. Finally, both fractions exhibited enhanced friction-reducing capability as compared to their parent WCO. The light fractions from a nonsegregated oil, a fast food restaurant oil and a deep-fried food establishment oil yielded wear reductions of 11.7%, 44.3% and 36.8%, respectively. Therefore, molecular distillation has been proved to be a key strategy to obtain more efficient liquid eco-lubricants.
Arias Montano. Repositorio Institucional de la Universidad de Huelva
oai:ariasmontano.uhu.es:10272/28165
Datos de investigación Set de datos (Dataset)

Beyond the Project Cycle: Relational Sustainability in Transdisciplinary Social Innovation in Social Services [Dataset]

  • Anillo Pérez, Luna del Alba
  • Ferri Fuentevilla, Elena
  • Fernández Borrero, Manuela Ángela|||0000-0002-7313-5163
  • Martí García, Susana|||0000-0001-6651-3114
Transdisciplinarity and the co-production of knowledge have become fundamental approaches to addressing complex social problems. However, the sustainability of collaborative partnerships remains underexplored from an empirical perspective. This article examines the mechanisms that shape the continuity of collaborative networks in social innovation projects in the field of social services, particularly those linked to community-based welfare systems in Andalusia (Spain). Drawing on a thematic qualitative analysis of 15 social innovation projects and 14 semi-structured interviews with project coordinators, the study explores how diverse actors (universities, public administrations, third-sector organisations, and citizens) mobilise different types of social capital within local social services. The findings reveal that collaboration success depends on a balance between relational enablers (trust and shared experiences) and structural barriers (bureaucracy, work overload, and lack of time). The analysis also shows that participatory methodologies and connections with pre-existing networks are essential for sustaining collaboration after project completion. The article concludes that the sustainability of transdisciplinary social innovation in social services requires moving beyond project management logics and investing in the care of invisible relational structures, with implications for public policies aimed at consolidating trust ecosystems and long-term collective learning.
Arias Montano. Repositorio Institucional de la Universidad de Huelva
oai:ariasmontano.uhu.es:10272/29072
Datos de investigación Set de datos (Dataset)

Formulation and lab‐scale testing of bitumen/bio‐based PCM binders for potential use in passive building thermal regulation [Dataset]

  • Gallardo Álvarez, Eulalia
  • Tenorio Alfonso, Adrián
  • Cuadri Vega, Antonio Abad|||0000-0002-8289-0937
The objective of this paper is to manufacture bituminous roofing materials by the direct inclusion of a bio‐based phase change material (PCM) for potential use in passive building thermal regulation. The ability of the selected prototype to regulate the indoor temperature was evaluated by its integration as a roofing element into a small test‐box and subjecting it to a simulated solar irradiation. Interestingly, to maintain the indoor air of the test‐box at the comfort temperature of 22ºC, the peak indoor air temperature and the cooling‐load reduction based on indoor‐air temperature integration decreased by 1.23 ± 0.18ºC and 15.1 ± 0.82 %, respectively, when compared to the commercial polymer/bituminous binder.
Arias Montano. Repositorio Institucional de la Universidad de Huelva
oai:ariasmontano.uhu.es:10272/27857
Datos de investigación Set de datos (Dataset)

Green oleogels based on elm pulp cellulose nanofibers: effect of the nanofibrillation pre-treatment on their thermo-rheological behavior [Dataset]

  • Roman Fercheluc, Claudia
  • Delgado Canto, Miguel Ángel|||0000-0003-0573-7987
  • Fernández Silva, Samuel David|||0000-0001-6253-1497
  • García Morales, Moisés|||0000-0003-4153-487X
  • Roman Fercheluc, Claudia|||0000-0002-7960-5832
Sustainable lubricating oleogels were obtained based on elm (Ulmus minor Mill.) pulp cellulose nanofibers in castor oil. Before their nanofibrillation, two samples of the same bleached pulp were subjected to two different pre-treatments, either mechanical PFI (Paper and Fibre Research Institute) refining or chemical TEMPO-mediated oxidation. Their effect on the oleogels’ viscous flow and oscillatory shear behaviors was determined at different temperatures. Very pronounced differences were observed between these oleogels. The oleogel from the chemically-pretreated nanofibers showed evidences of being much more sensitive to both temperature and large shear deformations. Hence, its shear modulus underwent a very remarkable decay of 95.8% when subjected to a non-linear stress value of 100 Pa for 30 min. In turn, under the same conditions, a decay of only 41.4% was observed for the oleogel based on the nanofiber from the mechanically-pretreated nanofibers.
Arias Montano. Repositorio Institucional de la Universidad de Huelva
oai:ariasmontano.uhu.es:10272/28628
Datos de investigación Set de datos (Dataset)

Material suplementario y datos geoquímicos asociados a la tesis doctoral &quot

Modelización hidrogeoquímica para la gestión de la contaminación y restauración de la cuenca del río Odiel&quot
  • Romero Matos, Jonatan|||0000-0002-8010-2060
Este material suplementario acompaña a la tesis doctoral "Modelización hidrogeoquímica para la gestión de la contaminación y restauración de la cuenca del río Odiel". Los datos corresponden a campañas de muestreo hidrogeoquímico realizadas en la cuenca del río Odiel (Faja Pirítica Ibérica, SO de España), incluyendo series temporales y espaciales de parámetros fisicoquímicos y concentraciones de metales y sulfatos en aguas afectadas por drenaje ácido de mina (AMD). El conjunto de datos se empleó para cuantificar cargas contaminantes, identificar las principales fuentes de contaminación, evaluar el riesgo de acidificación del futuro embalse de Alcolea y desarrollar y validar modelos geoquímicos para la simulación de escenarios de restauración y de los efectos de eventos extremos asociados al cambio climático. La documentación incluye una base de datos organizada en tres hojas de cálculo, cada una de ellas vinculada a uno de los capítulos principales de la tesis. Las hojas de datos recopilan la información empleada en los análisis hidrogeoquímicos y en los procesos de modelización desarrollados a lo largo de la investigación. Su estructura facilita la trazabilidad de los resultados presentados, así como la reproducibilidad de los procedimientos metodológicos aplicados. Este conjunto de datos constituye un recurso de apoyo para la interpretación de los resultados y para futuras investigaciones relacionadas con la gestión, restauración y evaluación ambiental de la cuenca del Río
Buscador avanzado