Pasar al contenido principal

Resultados de investigación

Rights
Projectcode
Resultados totales (Incluyendo duplicados): 43
Encontrada(s) 5 página(s)
Repositorio Digital UPCT
oai:repositorio.upct.es:10317/26194
Datos de investigación Set de datos (Dataset)

Effect of graphene oxide and ionic liquid on the sliding wear and abrasion resistance of injection molded PMMA nanocomposites [Dataset]

  • Minguez Enkovaara, Luis Francisco
  • Carrión Vilches, Francisco José
  • Bermúdez Olivares, María Dolores
This dataset contains the experimental data obtained during the characterization and tribological evaluation of injection molded nanocomposite materials based on PMMA and modified with graphene oxide and hybrid graphene oxide+ionic liquid additives. The dataset includes physicochemical characterization, thermal analysis, tribological evaluation and surface characterization of GO, GOIL IL, and its corresponding plastics of PMMA, PMMA+GO and PMMA+GOIL on the external and core sections of injection molded parts. Experimental data comprise raman analyses, differential scanning calorimetry (DSC), X-rAY difraction (XRD), Dynamic-mechanical analyses (DMA), rheometric measurements, thermogravimetric analysis (TGA), friction and wear measurements, profilometry analyses, optical microscopy observations, SEM micrographs, EDX elemental mappings, and XPS spectra.
Repositorio Digital UPCT
oai:repositorio.upct.es:10317/26192
Datos de investigación Set de datos (Dataset)

Rheological and tribological behavior of new 3D-printed poly(lactic acid) modified by ionic liquid [Dataset]

  • Sánchez Rodríguez, Cristian
  • Pamies Porras, Ramón Francisco
  • Sanes Molina, José
  • Carrión Vilches, Francisco José
  • Bermúdez Olivares, María Dolores
  • Doval Miñarro, Marta
Experimental data of 3D-printed (fused deposition modeling) poly(lactic acid) (PLA) and PLA modified with 5 wt.% of the solid ionic liquid 1-butyl-1-methylpyrrolidinium hexafluorophosphate (PLA + IL). The materials were processed by twin-screw extrusion of filaments followed by 3D printing. The dataset includes extrusion and 3D-printing parameters, EDX analysis, thermal analysis (DSC, TGA), rheology (strain sweep and frequency sweep: G', G'' and complex viscosity), surface topography and roughness of the as-printed surfaces, reciprocating friction tests against AISI 316L steel with sliding parallel and perpendicular to the 3D printing direction, surface roughness inside and outside the wear tracks, SEM micrographs, and short-term (90 days) degradability tests of 3D-printed films in seawater (mass change and SEM)., This research was funded by MCIN/AEI/10.13039/501100011033/FEDER, UE, grant number PID2021-122169NB-I00. C. Sánchez acknowledges MCIN/AEI for a research fellowship (grant no. PRE2018-083774).
Repositorio Digital UPCT
oai:repositorio.upct.es:10317/26213
Datos de investigación Set de datos (Dataset)

Experimental data for the characterization of PHBV nanocomposites containing nanolayered additives [Dataset]

  • Martínez Rubio, Pablo Manuel
  • Avilés González, María Dolores
  • Pamies Porras, Ramón Francisco
  • Carrión Vilches, Francisco José
  • Bermúdez Olivares, María Dolores
  • Benítez Benítez, Sergio José
  • Arribas, Alejandro
This dataset contains the experimental data supporting the publication "In-Depth Analysis of the Complex Interactions Induced by Nanolayered Additives in PHBV Nanocomposites". The dataset includes thermal, structural, morphological and viscoelastic characterization of PHBV and PHBV-based nanocomposites containing 3 wt.% Cloisite 20A (C20A) and 3 wt.% calcined hydrotalcite (CHT). The characterization techniques include thermogravimetric analysis (TGA), differential scanning calorimetry (DSC), X-ray diffraction (XRD), rheology, dynamic mechanical analysis (DMA), field-emission scanning electron microscopy (FESEM) and laser profilometry., Ministerio de Ciencia e Innovación (MCIN/AEI): Project PID2021-122169NB-I00 Predoctoral contract PRE2022-102014
Repositorio Digital UPCT
oai:repositorio.upct.es:10317/26203
Datos de investigación Set de datos (Dataset)

Experimental data of Lubricant Performance in Wind Turbines [Dataset]

  • Jiménez Ballesta, Ana Eva
  • Martín Barajas, Héctor
  • Avilés González, María Dolores
  • Martínez Mateo, Isidoro José
  • Carrión Vilches, Francisco José
This dataset contains the records of 24 distinct parameters obtained from regular standard maintenance analyses during 10 years of monitoring of four wind turbine gearbox lubricants (M01, M02, S01, and S02), used for the statistical study of trends, performance differences, correlations, and the main maintenance parameters. The present dataset has been preprocessed from a more extensive one to avoid inconsistencies, noncoherent or corrupted data, as well as to eliminate confidential data from the participating companies., European Union FEDER Program; Ministerio de Ciencia e Innovación (MCIN/AEI): Project PID2021-122169NB-I00.
Repositorio Digital UPCT
oai:repositorio.upct.es:10317/26212
Datos de investigación Set de datos (Dataset)

Experimental data for high-performance bio-based UV-curable coatings with tunable mechanical and tribological properties [Dataset]

  • Martínez Rubio, Pablo Manuel
  • Avilés González, María Dolores
  • Pamies Porras, Ramón Francisco
  • Carrión Vilches, Francisco José
  • Platnieks, Oskars
  • Jurinovs, Maksims
  • Veseta, Madara
  • Gaidukovs, Sergejs
This dataset contains the experimental data supporting the publication "High-performance bio-based UV-curable coatings with tunable mechanical and tribological properties". The dataset includes physicochemical, thermal, mechanical, surface and tribological characterization of bio-based UV-curable coatings formulated from acrylated epoxidized soybean oil (AESO), isobornyl methacrylate (IBOMA) and isobornyl acrylate (IBOA). The characterization techniques include FTIR spectroscopy, UV-VIS spectroscopy, thermogravimetric analysis (TGA), dynamic mechanical analysis (DMA), tensile testing, surface profilometry, wettability measurements, adhesion testing, scratch testing, reciprocating sliding tribological tests, optical microscopy and scanning electron microscopy., Ministerio de Ciencia e Innovación (MCIN/AEI): Project PID2021-122169NB-I00 Predoctoral contract PRE2022-102014
Repositorio Digital UPCT
oai:repositorio.upct.es:10317/26190
Datos de investigación Set de datos (Dataset)

Experimental data of vegetable biolubricants based on avocado oil and ionic liquid additives [Dataset]

  • Avilés González, María Dolores
  • Mostaza Ucedo Díaz, Paloma
  • Bermúdez Olivares, María Dolores
  • Carrión Vilches, Francisco José
  • Caparrós García, Tomás
This dataset contains experimental data obtained during the characterization and tribological evaluation of avocado-oil-based biolubricants modified with the protic ionic liquid diethylmethylammonium methanesulfonate. The dataset includes physicochemical characterization, epoxidation and spectroscopic verification of avocado oil, viscosity measurements, wettability studies, thermal stability analyses, friction and wear results, surface roughness measurements, microscopy observations, elemental analyses and XPS surface characterization associated with tribological testing., Ministerio de Ciencia e Innovación (MCIN/AEI): Project PID2021-122169NB-I00. Predoctoral contract PRE2022-102014
Repositorio Digital UPCT
oai:repositorio.upct.es:10317/26211
Datos de investigación Set de datos (Dataset)

Experimental data for the physicochemical characterisation of graphene-ammonium lactate ionic liquid nanofluid [Dataset]

  • Martínez Rubio, Pablo Manuel
  • Avilés González, María Dolores
  • Arias Pardilla, Joaquín
  • Carrión Vilches, Francisco José
  • Sanes Molina, José
  • Bermúdez Olivares, María Dolores
  • Pamies Porras, Ramón Francisco
This dataset contains the experimental data supporting the publication "Physicochemical characterisation of graphene-ammonium lactate ionic liquid nanofluid". The dataset includes Raman and FTIR spectroscopy, electrical conductivity, rheological characterization and cyclic voltammetry measurements of dispersions prepared by incorporating graphene (0.1, 0.5 and 1 wt%) into the protic ionic liquid 2-hydroxyethylammonium lactate (ML). Images related to dispersion stability and graphical representations used in the publication are also included., Ministerio de Ciencia e Innovación (MCIN/AEI): Project PID2021-122169NB-I00 Predoctoral contract PRE2022-102014
Repositorio Digital UPCT
oai:repositorio.upct.es:10317/26038
Datos de investigación Set de datos (Dataset)

Python design scripts and HFSS iris simulation data for TE201-cavity bandpass filters with cascaded triplet topology [Dataset]

  • Oliva Aparicio, Antonio
  • Hinojosa Jiménez, Juan
  • Melcón Álvarez, Alejandro
Software in Python to perform the design along with HFSS simulation results for the iris structures. This dataset and software refer to the filter design example (cascaded triplet topology) of the journal article with DOI: 10.1109/TMTT.2025.3567729. The best candidate selection is run first. Once identified the best combination of irises, their corresponding IDs are indicated in the second Python script (refinement stage). Finally, run this second script to obtain the designed cavity. See README for more information., This dataset contains the software and simulation data needed to reproduce the design of a rectangular-waveguide bandpass filter based on TE201 cavities with cascaded triplet topology (centre frequency 10 GHz, fractional bandwidth 2 %). It includes: - A CSV table with Ansys HFSS parametric simulations of an offset inductive iris that connects a standard WR-90 waveguide to a wider waveguide in which the TE10 and TE20 modes propagate. The table gives magnitudes, phases and partial derivatives of the scattering parameters as a function of the iris offset and width. - Two Python scripts that apply an extended equivalent-circuit model of the iris to these data. The first script selects the best pair of input and output irises; the second refines their dimensions and computes the cavity length. The scripts run with open-source Python libraries and do not require HFSS., - Ministerio de Ciencia, Innovacion y Universidades (Spain), FPU predoctoral grant FPU20/02380. - Agencia Estatal de Investigacion (Spain), project "Antenas y circuitos para Redes de sensores Inalambricas y Eficientes usando Low-orbit Satelites", TED2021-129196B-C42. - Agencia Estatal de Investigacion (Spain), project "Diseno y Desarrollo de Nuevos Componentes de Altas Prestaciones para Sistemas de Comunicaciones de Alta Frecuencia", PID2022-136590OB-C42. - Fundacion Seneca - Agencia de Ciencia y Tecnologia de la Region de Murcia (Spain), project "Componentes Radiantes y de Filtrado de Microondas para Pequenos Satelites Emergentes", 22076/PI/22.
Repositorio Digital UPCT
oai:repositorio.upct.es:10317/26241
Datos de investigación Set de datos (Dataset)

Experimental data of the complex crystalline behavior and tribological performance of polyhydroxyalkanoates [Dataset]

  • Martínez Rubio, Pablo Manuel
  • Avilés González, María Dolores
  • Carrión Vilches, Francisco José
  • Pamies Porras, Ramón Francisco
This dataset contains the experimental data obtained during the structural, thermal, mechanical and tribological characterization of two polyhydroxyalkanoates: Poly(3-hydroxybutyrate-co-3-hydroxyhexanoate) (PHBHHx) and Poly(3-hydroxybutyrate-co-4-hydroxybutyrate) (P3HB4HB). The dataset includes nuclear magnetic resonance characterization, X-ray diffraction analysis, thermal characterization, rheological studies, mechanical testing and tribological evaluation of both biodegradable polymers. Experimental data comprise NMR spectra, XRD measurements, thermogravimetric analysis (TGA), differential scanning calorimetry (DSC), melt flow rate measurements, rheological characterization, dynamic mechanical analysis (DMA), hardness measurements, progressive scratch tests and multiple-scratch tests., Ministerio de Ciencia e Innovación (MCIN/AEI): Project PID2021-122169NB-I00 Fundación Séneca (Región de Murcia): FPI Grant 21574/FPI/21
Repositorio Digital UPCT
oai:repositorio.upct.es:10317/26240
Datos de investigación Set de datos (Dataset)

Experimental data of epoxy coatings modified with sustainable ionic liquid-graphene nanolubricants [Dataset]

  • Martínez Rubio, Pablo Manuel
  • Avilés González, María Dolores
  • Carrión Vilches, Francisco José
  • Bermúdez Olivares, María Dolores
  • Pamies Porras, Ramón Francisco
This dataset contains the experimental data obtained during the characterization and tribological evaluation of epoxy coatings modified with the sustainable protic ionic liquid 2-hydroxyethylammonium lactate (ML) and graphene-ionic liquid nanolubricants (MLG). The dataset includes curing characterization, thermal analysis, rheological studies, tribological testing and surface characterization of epoxy resin coatings containing different concentrations of ionic liquid and graphene nanofluids. Experimental data comprise differential scanning calorimetry (DSC), rheological measurements, thermomechanical characterization, dynamic mechanical analysis (DMA), friction and wear measurements, optical profilometry, SEM observations, EDS analyses, Raman spectroscopy data, coating thickness measurements and surface roughness characterization., Ministerio de Ciencia e Innovación (MCIN/AEI): Project PID2021-122169NB-I00 Fundación Séneca (Región de Murcia): FPI Grant 21574/FPI/21
Buscador avanzado