Pasar al contenido principal

Resultados de investigación

Rights
Projectcode
Resultados totales (Incluyendo duplicados): 275
Encontrada(s) 28 página(s)
idUS. Depósito de Investigación de la Universidad de Sevilla
oai:idus.us.es:11441/167278
Datos de investigación Set de datos (Dataset)

Neuromorphic Audio for Predictive Maintenance in Peristaltic Pumps [Dataset]

Audio neuromórfico para mantenimiento predictivo en bombas peristálticas [Dataset]
  • Montes-Sánchez, Juan Manuel
  • Domínguez Morales, Juan Pedro
  • Vicente Díaz, Saturnino
  • Jiménez Fernández, Ángel Francisco
This dataset contains processed audio samples coming from a hydraulic block from a biomedical equipment. The block mounts 3 Thomas SR10/30 DC standard perisltaltic pumps, which were filled with distilled water. Only one pump was running at the same time during these recordings. There are two different predictive maintenance scenarios. In the first one, the cassettes of the pumps were changed before each recording. We used cassettes with 2 different levels of degradation: NEW (unused) and OLD (lifetime already expired). We defined 3 different classes: Class 1 is STOP (no pump running), class 2 is NEW (one pump running with a new cassette), and class 3 is OLD (one pump running with an old cassette). In the second scenario, air bubbles were introduced into the tube. This second scenario also has 3 classes: Class 1 is STOP (no pump running), class 2 is NORMAL (no air bubbles), and class 3 is BUBBLE (air bubbles present). A single microphone was used for all recordings. The .wav audio files were processed using a 64 channel Neuromorphic Auditory Sensor (NAS) into .aedat files, which are the present in this dataset. This neuromorphic audio data were also converted into cochleogram images using the software pyNAVIS, and they are also present in this format (.png files)., There is one folder for each of the two scenarios (aging and bubble). Inside those folders there are 3 subfolders, one for each data type (AEDAT, PNG and WAV). For WAV and AEDAT, each file is a unique sample tagged with one class (1, 2 or 3). At the end of each filename this class is also included. For example, 0008_03.wav is the sample number 8, which corresponds to class 3 tagged data. PNG cochleogram images represent 500ms audio time each and are named after their source AEDAT file followed by their starting time mark in microseconds.
idUS. Depósito de Investigación de la Universidad de Sevilla
oai:idus.us.es:11441/162880
Datos de investigación Set de datos (Dataset)

Peristaltic pump aging detection dataset

Dataset para detección de envejecimiento de bombas peristálticas
  • Montes-Sánchez, Juan Manuel
  • Uwate, Yoko
  • Nishio, Yoshifumi
  • Vicente Díaz, Saturnino
  • Jiménez Fernández, Ángel Francisco
This dataset contains samples coming from a hydraulic block from a biomedical equipment. The block mounts 3 Thomas SR10/30 DC standard perisltaltic pumps, which were filled with distilled water. Only one pump was running at the same time during these recordings, always at maximum constant speed. The cassettes of the pumps were changed before each recording. We used cassettes with 2 different levels of degradation: NEW (unused) and OLD (lifetime already expired). We defined 3 different classes: Class 1 is STOP (no pump running), class 2 is NEW (one pump running with a new cassette), and class 3 is OLD (one pump running with an old cassette). The classified samples were recorded using several sensors: 3 accelerometers, 1 gyroscope, 1 magnetometer and 1 microphone. All data were recorded at the same time at the maximum available frequency using the device "ST SensorTile.box". The raw data has already been processed into sepparate different .csv files (.wav files for audio) using python code., Each sensor has its own folder. The sensor folder name starts with ACC for accelerometer data, GYRO for gyroscope data, MAG for magnetometer data or MIC for microphone data. After that, the name of the sensor. At the end, sampling frequency in Hz. For example: ACC_LISDW12_1600Hz folder contains data for the accelerometer named LISDW12 at a sampling rate of 1600Hz. Each sensor folder contains 17 .csv files except for the microphone folder, which contains 17 .wav files. Each file is a unique sample tagged with one class (1, 2 or 3). At the end of each filename this class is also included. For example, 0008_03.csv is the sample number 8, which corresponds to class 3 tagged data.
idUS. Depósito de Investigación de la Universidad de Sevilla
oai:idus.us.es:11441/178630
Datos de investigación Set de datos (Dataset)

Dataset of Efficient Strategy to Synthesize Tunable pH-Responsive Hybrid Micelles Based on Iron Oxide and Gold Nanoparticles

  • Gimeno Ferrero, Raúl
  • Rodríguez de Jesús, Javier
  • Pernía Leal, Manuel
idUS. Depósito de Investigación de la Universidad de Sevilla
oai:idus.us.es:11441/164228
Datos de investigación Set de datos (Dataset)

Pozzolanic Activity and Life Cycle Analysis of Portland Cements with Calcined Slate [Dataset]

  • Calderón-Morales, Bianca Rafaela Silva
  • Costal, Glauber Zerbini
  • García Martínez, Antonio
  • Pineda Palomo, Paloma
  • García-Tenorio García-Balmaseda, Rafael
The data presented this work results from the investigation on the pozzolanic activity and environmental impact of Portland cement CEM II produced with calcined slate waste (https://doi.org/10.1016/j.jobe.2024.110044). The data include information on the physical, chemical, and mineralogical characteristics of slate, as well as an indication of its pozzolanic activity. The dataset concerning the environmental impact assessment includes information on the processes of slate extraction, grinding, transportation, and calcination. Additionally, data on the inputs required for the production of 1 tonne of cement and the environmental impact for each studied impact category are provided., Summary Abstract 1 Value 2 Data Description 2.1 Technical assesment 2.2 Environmental assesment 3. Experimental design, materials and methods 3.1 Experimental design 3.2 Materials 3.3 Methods 3.3.1 X-ray diffraction test 3.3.2 X-ray fluorescence test 3.3.3 Loss of ignition test 3.3.4 Furier Transform Infrared Spectrophotometer test 3.3.5 Strength comparison method 3.3.6 Strength Activity Index comparison method 3.3.7 Frattini Test and Saturated lime test 3.3.8 Life cycle assesment 3.4 Equations used 3.4.1 Weight loss on ognition 3.4.2 Strength Activity Index 3.4.3 Frattini test and Saturated lime test 3.4.4 Calculation of the amount of mass to be calcined 3.4.5 Calcination energy calculation 4 References
idUS. Depósito de Investigación de la Universidad de Sevilla
oai:idus.us.es:11441/174554
Datos de investigación Set de datos (Dataset)

Dataset of Hydrothermal ageing in zirconia composites with boron nitride nanosheets

  • Muñoz Ferreiro, Carmen
  • Guisado Arenas, Elisa
  • Gallardo López, Ángela María
  • Morales Rodríguez, Ana
  • Poyato, Rosalía
The dataset contains the results from transmission electron microscopy, particle size distribution, Raman spectroscopy and optical absorbance of Boron nitride nanosheet (BNNS) suspensions obtained by kitchen blender exfoliation at three rotor velocities. It also contains the results of the microstructural chracterization by scanning electron microscopy of spark plasma sintered ceramic composites with 3 mol% yttria tetragonal zirconia policrystal (3YTZP) matrix and different BNNS contents (1, 2.5 and 5 vol%), and their low temperature hydrothermal degradation study., Absorbance spectra Particle size distributions Raman spectra Scanning electron microscopy images from the fracture surfaces and polished cross section surfaces of the analyzed composites Hydrothermal ageing data
idUS. Depósito de Investigación de la Universidad de Sevilla
oai:idus.us.es:11441/184034
Datos de investigación Set de datos (Dataset)

Dataset of Ruthenium Nanoparticles based on micelles as controlled release nanosystems with antibacterial activity

  • Gimeno Ferrero, Raúl
  • Estruch Blasco, Manel
  • Pajuelo Domínguez, Eloísa
  • Fernández Fernández, Inmaculada
  • García-Martín, María Luisa
  • Pernía Leal, Manuel
idUS. Depósito de Investigación de la Universidad de Sevilla
oai:idus.us.es:11441/176956
Datos de investigación Set de datos (Dataset)

Dataset of Microstructural study and impedance spectroscopy of zirconia/graphene composites

  • Coto-Ruiz, Francisco Javier
  • De la Cruz-Blanco, Ana
  • Moriche Tirado, Rocío
  • Morales Rodríguez, Ana
  • Poyato Galán, Rosalía
The dataset contains the results from X-ray diffraction, Raman spectroscopy and impedance spectroscopy studies of ceramic composites with 8 mol% yttria cubic stabilized zirconia (8YCSZ) matrix and different contents of reduced graphene oxide (rGO, 1, 2.5, 5 and 10 vol%). The composites were spark plasma sintered at 1300 and 1350 ºC. The dataset also includes scanning electron microscopy images of the sintered composites., Difractogramas de rayos X Espectros Raman Diagramas Nyquist Curvas Arrhenius de conductividad Imágenes de microscopía electrónica de barrido de las superficies de fractura, y de las superficies pulidas, de los compuestos analizados.
idUS. Depósito de Investigación de la Universidad de Sevilla
oai:idus.us.es:11441/165883
Datos de investigación Set de datos (Dataset)

Stereoselective Synthesis of Chiral C2-Symmetric 1,3- and 1,5-Bissulfoxides Guided by Horeau Principle: Understanding the Influence of the Carbon Chain Nature in its Ability for Metal Coordination [Dataset]

  • Moreno Rodríguez, Nazaret
  • Prieto Ramírez, Luis Alberto
  • Valdivia Giménez, Victoria Esther
  • Recio Jiménez, Rocío
  • Fernández Fernández, Inmaculada
Diastereomeric excess determination of 1,3-bisulfinates. Experimental data of 1,3-bis-(sulfinyl)propanes. Experimental data of allylation of N-(benzoyl)isobutylhydrazone. Experimental data of vinyl sulfoxides. Experimental data of 1,5-bis(sulfinyl)-3-thioderivatives. Figures of regioselective oxidation of 1,5-bis(sulfinyl)-3-thioderivatives. Figures of palladium(II) and ruthenium(II) complexes formation. HPLC chromatograms of selected compounds. 1H NMR, 13C{1H} NMR and 19F NMR of selected compounds. 2D NMR of selected compounds. X-ray Structural Analysis for (CDCC 2309479).
idUS. Depósito de Investigación de la Universidad de Sevilla
oai:idus.us.es:11441/182197
Datos de investigación Set de datos (Dataset)

Desarrollo tecnológico: Sistema de determinación cuantitativa del porcentaje de cocido en sosa cáustica de aceitunas y predicción del momento óptimo de finalización (visión artificial y cloud computing)

Technological development: System for quantitative determination of lye cooking degree in table olives and prediction of the optimal process end time (computer vision and cloud computing)
  • Madueño Luna, Antonio
  • Madueño Luna, José Miguel
  • López Lineros, Miriam
  • López Gordillo, Miguel Calixto
Desarrollo tecnológico para determinar de forma cuantitativa, durante el tratamiento alcalino en NaOH (cocido) de aceitunas verdes al estilo sevillano, el porcentaje de penetración de la sosa en la pulpa y predecir el momento óptimo para finalizar el proceso. El sistema combina un protocolo de toma de muestras y acondicionamiento del fruto (corte, marcado con fenolftaleína y captura de imagen con iluminación constante) con algoritmos de visión artificial que calculan el porcentaje de cocido. A partir de la serie temporal de medidas, un interpolador estima el instante en el que se alcanzará un umbral objetivo (p.ej., 2/3 o 3/4 de penetración). Incluye además una aplicación web para gestión y trazabilidad del proceso (cloud computing) y evidencia de implantación industrial (TRL 9)., Estructura principal: - Cocido_aceitunas.docx: memoria descriptiva del desarrollo tecnológico (objetivo, descripción, impacto, evidencias). - Cocido Aceitunas.pptx: presentación técnica (metodología y resultados de ensayos). - Patente/3_ES-2394821_B2.pdf: patente antecedente (OEPM) ES-2394821 B2. - Contrato/CONTRATO.pdf: evidencia contractual FIUS–Pymesuma S.L. (23/07/2014) [contiene datos personales]. - Contrato/Contrato FIUS.txt: enlace a proyecto asociado (SISIUS idproy=26626). - README_*: ficheros de descripción para depósito en repositorio.
idUS. Depósito de Investigación de la Universidad de Sevilla
oai:idus.us.es:11441/179019
Datos de investigación Set de datos (Dataset)

Dataset for Electric field-induced functional changes in electrode-immobilized mutant species of human cytochrome c

  • Olloqui Sariego, José Luis
  • Pérez Mejías, Gonzalo
  • Márquez Escudero, Inmaculada
  • Guerra Castellano, Alejandra
  • Calvente Pacheco, Juan José
  • Rosa Acosta, Miguel Ángel de la
  • Andreu Fondacabe, Rafael Jesús
  • Díaz Moreno, Irene
Post-translational modifications and naturally occurring mutations of cytochrome c have been recognized as a regulatory mechanism to control its biology. In this work, we investigate the effect of such in vivo chemical modifications of human cytochrome c on its redox properties in the adsorbed state onto an electrode. In particular, tyrosines 48 and 97 have been replaced by the non-canonical amino acid p-carboxymethyl-L-phenylalanine (pCMF), thus mimicking tyrosine phosphorylation. Additionally, tyrosine 48 has been replaced by a histidine producing the natural Y48H pathogenic mutant. Thermodynamics and kinetics of the interfacial electron transfer of wild-type cytochrome c and herein produced variants, adsorbed electrostatically under different local interfacial electric fields, were determined by means of variable temperature cyclic film voltammetry. It is shown that non-native cytochrome c variants immobilized under a low interfacial electric field display redox thermodynamics and kinetics similar to those of wild-type cytochrome c. However, upon increasing the strength of the electric field, the redox thermodynamics and kinetics of the modified proteins markedly differ from those of the wild-type species. The mutations promote stabilization of the oxidized form and a significant increase in the activation enthalpy values that can be ascribed to a subtle distortion of the heme cofactor and/or difference of the amino acid rearrangements rather than to a coarse protein structural change. Overall, these results point to a combined effect of the single point mutations at positions 48 and 97 and the strength of electrostatic binding on the regulatory mechanism of mitochondrial membrane activity, when acting as a redox shuttle protein., File name: Otras-figuras_Ms_BBA-Bioenergetics.docx Description: A Word file with the figure images File name: Raw_data.zip Description: .nox files with the raw data of voltammetry File name: Fig_2+3+6.jnb Description: A sigmaplot file with figures 2+3+6 File name: Fig_5.jnb Description: A sigmaplot file with figure 5
Buscador avanzado