Resultados de investigación

This file includes finite element simulation data (ultimate load factors) carried out on 60 steel and stainless steel frames, including regular and irregular frame configurations with different section sizes. Ultimate load factors corresponding to different initial imperfection combinations are included., 1

The dataset contains the following files: (1) readme.txt, it is a text file including details about the content of the dataset; (2) Measurement in ARSD_SMS_Data.xls, it is a MS Excel file containing the data used in the analysis of the primary studies, reported in Section 4 of the paper; and, (3) Metrics in ARSD.pdf, it is pdf file containing the complete list of metrics reported in the different primary studies. The metrics are classified into the following categories: QR metrics, QMIs, and QMI metrics. In the MS Excel file, the data is organised in separated sheets: (a) RQ1 - Literature characterisation; (b) RQ2 - QR Metrics, where QR refers to Quality Requirements; (c) RQ3 - QMI, where QMI refers to Quality Management Indicators; (d) RQ3 - Tools, corresponding to the reported tools used to manage QMIs; and, (e) RQ3 - QMI Metrics., This dataset has been used to generate part of the results included in the manuscript: “Quality Measurement in Agile and Rapid Software Development: A Systematic Mapping”, submitted to the Information and Software Technology journal (IST) at the time of publishing this dataset. The paper reports the results of a systematic mapping study surveying the literature related to quality requirements management through metrics in agile and rapid software development processes. The dataset contains the data extracted from the primary studies that was used in the analysis phase of the study and reported in the results section of the paper. The data extracted from the primary studies has been complemented with some data used for specific purposes, e.g. during the analysis phase, we included the list of companies collaborating in the paper analysing the authors’ affiliations to understand the level of implication of companies in the field. Complementing the data analysed, the dataset includes some detailed results that are not included in the body of the paper, i.e., the list of metrics reported in the selected primary studies., 1

The data base is related to the High Pressure Grinding Rolls (HPGR) modelling. This data was generated in a HPGR manufacturer pilot plant in Freiberg, Germany, and represents the particle size distribution measurement of the feed and the product of the milling reactor, and the calculation of some material features, as the moisture or the density. This data is necessary for the correct modelization of the comminution in a HPGR, and it can be used for different mathematical models., A model for High Pressure Grinding Rolls (HPGR) was developed in this work based on the widely used Population Balance Model (PBM). This approach uses a variety of different functions one of which is the breakage distribution function. The methodology to determine the function parameters is presented and using these values, the model was compared with real processed materials from an HPGR pilot plant, with tungsten ore as the test material. The results of the model parameter determination, and the product of the comminution in the HPGR, showed the dependency of material breakage on the material characteristics, and on the operative and process conditions. The model presented is reasonably robust, showing less error than the 3.0 Root Mean Square Error when compared with a heterogeneous feed particle size distribution material. The operational gap was also studied, and its dependency on the feed particle size, porosity, moisture, and specific pressing force was proven., 1

These data are associated to the paper with the same title of the authors, and are structured according to the figures in the paper: http://hdl.handle.net/2117/335727, The use of Cold Atmospheric Plasma (CAP) in oncology is being recently studied as a novel potential anti-cancer therapy. However, the beneficial effects of CAP for treating osteosarcoma have mostly been demonstrated in 2-dimensional cultures of cells, which do not mimic the complexity of the 3-dimensional (3D) bone microenvironment. In order to evaluate the effects of CAP in a relevant context of the human disease, we developed a 3D tissue-engineered model of osteosarcoma using a bone-like scaffold made of collagen type I and hydroxyapatite nanoparticles. Human osteosarcoma cells cultured within the scaffold showed a high capacity to infiltrate and proliferate and to exhibit osteomimicry in vitro. As expected, we observed significantly different functional behaviors between monolayer and 3D cultures when treated with Cold Plasma-Activated Ringer’s Solution (PAR). Our data reveal that the 3D environment not only protects cells from PAR-induced lethality by scavenging and diminishing the amount of reactive oxygen and nitrogen species generated by CAP, but also favours the stemness phenotype of osteosarcoma cells. This is the first study that demonstrates the negative effect of PAR on cancer stem-like cell subpopulations in a 3D biomimetic model of cancer. These findings will allow to suitably re-focus research on plasma-based therapies in future, 1

Data obtained from Computational Aeroacoustic simulation of Curle and F.WH analogies with OpenFoam., This dataset includes the results of the aeroacoustics field of a tandem cylinder calculated using Curle's and F-WH analogy with OpenFOAM. The sound levels are measured as Power Spectral Density (PSD). The temporal acoustic pressure data is also included., 1

This file includes data on system strength of stainless steel frames under gravity loads obtained from the finite element simulations carried out on six stainless steel frames. This data was used in the analysis carried out and reported in the publication: Input and output data is provided separately for each of the six frames investigated. Frames 1 and 2 correspond to austenitic stainless steel, Frames 3 and 4 to duplex stainless steel and Frames 5 and 6 to ferritic stainless steel., 1

This file includes data used in the calibration of statistical models for the different random variables affecting stainless steel members. This data was used in the analysis carried out and reported in the publication: Arrayago I., Rasmussen K.J.R., Real E. Statistical analysis of the material, geometrical and imperfection characteristics of structural stainless steels and members Journal of Constructional Steel Research 175, 106378, 2020. DOI: https://doi.org/10.1016/j.jcsr.2020.106378 Measured and nominal values are listed for geometry-related data. Measured values are listed for material, imperfection and residual stress data., 1

Productes de coneixement, El Equipo de Asesoramiento Técnico Civil en el Ámbito de la Familia (EATAF) da respuesta a las peticiones judiciales de asesoramiento técnico de los juzgados que actúan en materia de familia, en casos de separación o conflicto, con hijos menores de edad , a fin de proponer las medidas de organización familiar más adecuadas en cada situación. En continuidad con el producto de conocimiento colaborativo de 2011 Guía de Intervención con menores, documento de buenas prácticas para la intervención con los niños en los procedimientos judiciales, la CoP creyó conveniente crear un decálogo propio, que pudiera invitar a la buena práctica del divorcio a aquellos que han decidido elegir esa opción. Durante 2013 y 2014, los profesionales concibieron el decálogo “Padres, yo no me separo.”, en formato de díptico y cartel, junto con un plan de sensibilización y de difusión en formato de taller, dirigido a adultos y profesionales, por promover, desde la visión del niño, las buenas prácticas en situaciones de divorcio., info:eu-repo/semantics/publishedVersion

Background: Tooth autotransplantation is defined as the surgical repositioning of an autogenous tooth in another surgical site within the same individual. Aim: The aim of this research was to analyze the outcome of tooth transplantation using immature donor teeth compared with closed apex teeth and to compare differences between donor tooth positions on the arch. Methods: Electronic and manual literature searches were performed in different databases, including the National Library of Medicine (MEDLINE), EMBASE (OVID), Cochrane Central (CENTRAL), and the digital library of the Universitat Internacional de Catalunya (UIC University) from 1978 to March 2021. Studies were selected when they fulfilled the following criteria: only human prospective clinical studies, minimum sample size of 10 patients, minimum follow-up of 1 year, studies reporting or with at least deducible data on survival rates, immediate tooth autotransplantation with completed or incomplete root formation, and publications in the English language. A meta-analysis of random effects was developed to estimate the global effect measure of the survival rate, success rate, and root resorption involving the total sample, as well as open- and closed-apex groups. Results: Twenty-four articles were eligible for analysis. The Cohen’s kappa corresponding to this review was 0.87, and the risk assessment was considered low–moderate for the included studies. Overall survival and success rates were 95.9% and 89.4%, respectively, with a mean follow-up of 4 years and an overall mean age of 25.2 ± 12.3 years. Closed apex teeth showed a survival rate of 3.9% lower than that of open apex teeth. Higher complication rates were found for both inflammatory external root resorption and replacement root resorption in the closed-apex group, without reaching statistical significance. Conclusions: Tooth autotransplantation is a viable treatment alternative, regardless of the apical condition, with high survival and success rates after a mean follow-up of 4 years. Open-apex donor teeth could be considered the gold-standard option, showing lower complication rates when compared to closed-apex donor teeth. Future randomized controlled clinical studies are needed to examine the long-term prognosis of this technique., info:eu-repo/semantics/publishedVersion

Jornada sobre els valors humans en la gestió de les emergències, celebrada el 21 de novembre de 2013. Conté: E.R.I.E. Intervenció Psicosocial Creu Roja Catalunya / Jordi Martori; FDNY Facing Future Challenges with ICS / Ron Spadafora; El Procediment activació psicòleg a emergències / Ana María Pérez; Una Perspectiva policial: valors a la policia en accidents de trànsit / Joan Carles Carrascosa; Valors humans i bombers / Joan Carles Carrascosa., info:eu-repo/semantics/publishedVersion