Skip to main content

Resultados relacionados

Resultados totales (Incluyendo duplicados): 7
Encontrada(s) 1 página(s)

Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Biogenic origin of secondary eggshell units in dinosaur eggshells elucidates lost biomineralization process in maniraptoran dinosaurs

  • Zhang, Shukang
  • Choi, Seung|||0000-0002-9013-2909
  • Kim, Noe-Heon|||0000-0002-3553-3718
  • Xie, Junfang
  • Park, Yong|||0000-0003-3632-4915
  • Plümper, Oliver|||0000-0001-9726-0885
  • Sellés, Albert|||0000-0002-4637-6084
Secondary eggshell units, though rarely observed in modern avian eggshells, are marked structures in non-avian dinosaur eggshells that offer valuable paleobiological insights. Despite their significance, the origins of secondary eggshell units remain understudied, leading to debates in paleontology, including the hypothesis of an abiogenic origin for these structures. Here, we demonstrate that secondary eggshell units in non-avian dinosaur eggshells are biogenic in nature, based on analyses using advanced microscopic techniques. The structural characteristics of these units suggest a formation mechanism similar to that of turtle and crocodile eggshells, with matrix fibers likely initiating their development. Furthermore, a diminishing presence of secondary eggshell units in non-avian maniraptoran dinosaurs points to the evolution of a more refined physiological process for eggshell formation in this lineage. These findings shed light on the evolutionary trajectory of eggshell biomineralization in dinosaurs and their close relatives.
Digibug. Repositorio Institucional de la Universidad de Granada
Publication Artículo científico (JournalArticle)

Effects of nano- and micro-cellulose on Ca(OH)2 formation: Implications for lime-based binders

  • Guzmán García Lascurain, Paulina
  • Rodríguez Navarro, Carlos Manuel|||0000-0002-3179-8428
  • Toniolo, Lucia
  • Goidanich, Sara
Air lime-based mortars and plasters are preferred for the restoration of historic masonry due to their high compatibility, and for modern constructions given their lower environmental impact. However, their slow setting (via carbonation) and their limited strength hinder their widespread use. This study explores the influence of nano- and micro-cellulose additives dosed during lime slaking on the formation and textural/structural features of calcium hydroxide. The alkaline degradation of the additives, along with their interaction and adsorption/occlusion during heterogeneous and homogeneous precipitation of calcium hydroxide was studied. Both additives foster the non-classical crystallization of portlandite via amorphous phases, resulting in plate-like crystals in the case of nano-cellulose, whereas more reactive micro-cellulose promotes the stabilization of a dense liquid precursor, and upon its dehydration, the stabilization of amorphous calcium hydroxide. Ultimately both additives lead to the formation of potentially more reactive nano and mesostructured Ca(OH)2 particles., Italian PON "Ricerca e Innovazione" 2014-2020, European Union (EU) 955986, MCIN/AEI PID2021.125305NBI00, ERDF A way of making Europe, Junta de Andalucia RNM-179, University of Granada, Unidad Científica de Excelencia UCE-PP2016-05 DOT1316197 D45F21003710001 101005611
Digibug. Repositorio Institucional de la Universidad de Granada
Publication Artículo científico (JournalArticle)

Impact of Mixed-In Polyacrylic- and Phosphonate-Based Additives on Lime Mortar Microstructure

  • Valdez-Madrid, Dulce Elizabeth
  • Ruiz-Agudo, Encarnación
  • Bonilla-Correa, Sarah
  • De Belie, Nele
  • Cnudde, Veerle
Aminotris(methylene phosphonic acid) (ATMP) and poly(acrylic acid) sodium salt (PAA) have shown favorable results in the treatment of porous building materials against weathering damage, showing promising potential as mixed-in additives during the production of lime-based mortars. This study investigates the impact of these additives on microstructure and mechanical properties. Additives were introduced in various concentrations to assess their influence on CaCO3 crystallization, porosity, strength, and carbonation behavior. Results revealed significant modifications in the morphology of CaCO3 precipitates, showing evidence of nanostructured CaCO3 aggregates and vaterite stabilization, thus indicating a non-classical crystallization pathway through the formation of amorphous CaCO3 phase(s), facilitated by organic occlusions. These nanostructural changes, resembling biomimetic calcitic precipitates enhanced mechanical performance by enabling plastic deformation and intergranular bridging. Increased porosity and pore connectivity facilitated CO2 diffusion towards the mortar matrix, contributing to strength development over time. However, high additive concentrations resulted in poor mechanical performance due to the excessive air entrainment capabilities of short-length polymers. Overall, this study demonstrates that the optimized dosages of ATMP and PAA can significantly enhance the durability and mechanical performance of lime-based mortars and suggests a promising alternative for the tailored manufacturing of highly compatible and durable materials for both the restoration of cultural heritage and modern sustainable construction., European Union’s Horizon 2020 - Marie Sklodowska-Curie project SUBLime (grant agreement no. 955986), Bijzonder Onderzoeksfonds (BOF), European Union’s Horizon 2020 - Transnational Access (grant agreement no. 101005611), Spanish Government (grant PID2021-125305NB-I00), Junta de Andalucía (grant P20_00675), University of Granada (UCE-PP2016-05)
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Mechanisms of shear zone development in Krossøy, the Bergen Arcs, Norway

  • Filiberto, Lorena H.
  • Austrheim, Håkon
  • Putnis, Andrew
  • Padrón-Navarta, José Alberto
  • Reddy, Steven
  • Putnis, Christine V.
The island of Krossøy in the Bergen Arcs, southwestern Norway, provides an ideal geological setting to study the mechanisms of grain size reduction in plagioclase during shear zone development. The transition from a granulite facies anorthosite to mylonitic textures under amphibolite facies conditions is investigated through field observations, petrographic analysis, electron microprobe analysis, and electron backscattered diffraction (EBSD) techniques. Initial ductile deformation, evidenced by complex twinning and intragrain misorientation, leads to strain hardening and subsequent brittle fracturing. This results in grain size reduction primarily through fragmentation, forming a bimodal grain size distribution. Syntectonic recrystallization produces compositionally similar neoblasts. Subsequent interactions with fluids induce compositional recrystallization, leading to further grain size reduction and the formation of zoned plagioclase grains. These processes highlight the critical role of fluid-mediated recrystallization in shear zone development and strain localization. The spatial variation in deformation and hydration stages across Krossøy is attributed to both mechanical anisotropy and chemical reequilibration driven by fluid pathways. These findings enhance our understanding of the interplay between mechanical anisotropy, brittle failure and fluid infiltration in the lower crust, providing insights into the conditions that facilitate the formation and evolution of shear zones in the Bergen Arcs., This study has received funding from the European Union's Horizon 2020 research and innovation program (FluidNET) under the Marie Sklodowska-Curie Grant Agreement No 956127. This work benefited from the support of the EXCITE Network, funded by the European Union's Horizon 2020 research and innovation program under grant agreement No 101005611 and Horizon Europe grant agreement No 101131765
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Controls of focused fluid release in subduction zones: insights from experimental dehydration of brucite vein networks in serpentinite

  • Menzel, Manuel D.
  • Eberhard, Lisa
  • Arias, Austin
  • Padrón-Navarta, José Alberto
  • Plümper, Oliver
Aqueous fluids released by metamorphic dehydration of serpentinites are a key component for seismicity, creep, and geochemical cycling in subduction zones. How these fluids drain and migrate towards the mantle wedge has yet to be fully understood. Here we address the influence of pre-existing structural and mineralogical heterogeneities in serpentinites on dehydration and fluid migration at forearc conditions. We partially dehydrated natural serpentinite containing brucite veins in a piston-cylinder apparatus with a temperature gradient across the conditions of the brucite + antigorite = olivine + fluid reaction (485–520 °C; 1.5 GPa). Micro-tomography, electron microscopy and microstructural analysis of the experimental results, coupled with thermodynamic modelling, show that temperature, mineralogical heterogeneity and variable ingress of external H2 controlled the dehydration extent. Experimentally formed olivine indicates a topotactic relationship between [100]Ol and [0001]Brc, although the resultant fabric is overall random because brucite was randomly oriented. Olivine forms mono-mineralic aggregates along the walls of brucite veins, displaying very high porosity (up to 32%) and permeability (10–13–10–14 m2). Tracing the pre-existing brucite vein network, these aggregates can form a transient network of interconnected, highly permeable fluid channels that allows drainage and may enhance open-system exchange with neighboring lithologies. Infiltration of reduced external fluids can trigger redox dehydration of magnetite + antigorite to Fe-rich olivine, which renews porosity and propagates focused fluid flow. The distribution of brucite and magnetite, especially as vein networks, therefore has a first-order control on how focused fluid drainage and flow paths develop during subduction of serpentinites., Open Access funding provided thanks to the CRUE-CSIC agreement with Springer Nature. This research was funded by EXCITE Network Transnational Access TNA-C3-2023-13 under European Union’s Horizon 2020 grant agreement No 101005611 & Horizon Europe grant agreement No 101131765, and RUSTED projects PID2022-136471NB-C21 & PID2022-136471NB-C22 funded by the Agencia Estatal de Investigación (MCIN/AEI), Spain, co-financed by the European Union ERDF—a way of making Europe., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Kinematics of the Cretaceous Rifting in the Chainons Béarnais and Bigorre Basin (North Pyrenean Zone): Insights From Magnetic Fabrics and Mineral Anisotropy

  • Izquierdo Llavall, Esther
  • Calvín, P.
  • Aubourg, Charles
  • Koffi, Landry
  • Oliva-Urcia, Belén
  • Marcén Albero, Marcos
  • Senechal, Pascale
[EN] The North Pyrenean Zone results from the Late Cretaceous-Cenozoic inversion of the Mesozoic rift system extending along the Iberia-Europe plate boundary. The western part of this inverted rift (from the Tardets-Mauléon basin in the West to the Bigorre basin in the East) is strongly decoupled from the basement along Upper Triassic evaporites and slightly, internally overprinted by orogenic processes. These conditions make the area an ideal candidate for the study of rift-related structures and mineral fabrics registering the kinematics of the rifting process. This work focuses on the study of meso and micro-scale rift inheritance through a combination of structural analysis, anisotropy of magnetic susceptibility (AMS) and mineral shape fabrics extracted from X-Ray microtomography analysis. Previous AMS results (Mauléon basin) are integrated with data from 64 new AMS sites, acquired across both the Mesozoic, syn-rift cover and the Paleozoic basement. In syn-rift units, magnetic and mineral fabrics are in agreement and at a great extent inherited from syn- and post-rift stages. The compressional overprint of the Late-Cretaceous-Cenozoic inversion is limited and localizes along the south-western margin of the inverted basin. In the Paleozoic, a partial overprint of Mesozoic extension on AMS occurs in areas where rift-related peak temperatures exceeded ∼350°C. Rift-related mineral and magnetic lineations reveal a regional and constant through time NNW-SSE to NE-SW extension that attests this ample domain of the Pyrenean rift opened under a roughly orthogonal or slightly oblique rifting. Its easternmost part registered a partitioning between N-S and NW-SE extension directions, likely controlled by pre-rift faulting., Authors acknowledge the financial support received from the “Severo Ochoa” extraordinary grants for excellence IGME-CSIC (AECEX2021), the “Ayudas a la Incorporación de Científicos titulares” funded by the Consejo Superior de Investigaciones Científicas (CSIC) and the project UKRIA-4D (PID2019-104693GB-I00) of the Spanish Ministry of Science and Innovation, “ERDF A way of making Europe.” This project has received funding from the European Union's Horizon 2020 research and innovation programme under Grant TNA101005611 for Transnational Access conducted at DMEX-UPPA-FRANCE., Peer reviewed
RUO. Repositorio Institucional de la Universidad de Oviedo
Publication Artículo científico (JournalArticle)

Magnetic vector tomography reveals giant magnetofossils are optimised for magnetointensity reception

  • Harrison, R. J.
  • Neethirajan, J.
  • Pei, Z.
  • Marcano Prieto, Lourdes|||0000-0001-9397-6122
Funding was received from the European Union’s Research and Innovation Actions under grant agreements 101005611 and 101131765. R.J.H., P.Y.T., E.R. acknowledge funding from EXCITE (award number G106564) and EXCITE2 (award number G122171). (...) L.M. acknowledges funding from Horizon Europe Programme via Marie Sklodowska-Curie fellowship (101067742) and funding from the Spanish Government (project no. MCINN-24-PID2023-150968OA-I00)., Harrison R.J., Neethirajan J., Pei Z., Xue P., Marcano L., Abrudan R., Ringe E., Tung P.-Y., Kuppili V.S.C., Kaulich B., Daurer B.J., Hurtarte L.C.C., Kazemian M., Chang L., Donnelly C., Valencia S.