Skip to main content

Resultados relacionados

Resultados totales (Incluyendo duplicados): 27
Encontrada(s) 1 página(s)

UPCommons. Portal del coneixement obert de la UPC
Publication Artículo científico (JournalArticle)

Physics-driven efficient modeling of pseudo-boiling regions in transcritical wall-bounded flows for thermal management applications

  • Elmansy, Reda Mohamed Yousyf Abdallah|||0000-0002-7484-317X
  • Barea Sánchez, Guillem|||0009-0004-0448-0715
  • Jofre Cruanyes, Lluís|||0000-0003-2437-259X
Dataset link: https://doi.org/10.25452/figshare.plus.29787812. 2026 The Authors. Published by Elsevier Ltd. This is an open access article under the CC BY-NC-ND license ( http://creativecommons.org/licenses/bync-nd/4.0/ )., Accurate prediction of thermal behavior and pseudo-boiling regions in high-pressure transcritical flows is critical for the design of advanced wall-bounded thermal management systems, ranging from aerospace propulsion to high-efficiency power cycles. However, high-fidelity three-dimensional (3D) scale-resolving simulations are often computationally prohibitive for design and optimization. This study introduces a physics-driven compute-efficient framework that leverages a quasi-3D low-fidelity model to accelerate the analysis of such flows. In this approach, the low-fidelity model is first utilized to predict wall temperature profiles and characterize the wall-normal topology of the pseudo-boiling region. These thermal distributions are subsequently used to inform 3D direct numerical simulations (DNS), streamlining the overall design process. The results demonstrate that the methodology accurately reproduces mean thermal distributions and bulk flow quantities across a wide range of operating pressures and wall thermal configurations. Specifically, the error in predicting the pseudo-boiling wall-normal location remains below 5%, while trends in the bulk Reynolds number are consistently captured. Although the low-fidelity model does not resolve shear-dependent turbulence statistics, it accurately predicts the position of the pseudo-boiling region and bulk flow parameters. This framework provides a robust, cost-effective tool for the preliminary design and optimization of high-pressure thermal systems, significantly reducing the reliance on conventional, resource-intensive DNS., This work is funded by the European Union (ERC, SCRAMBLE, 101040379). Views and opinions expressed are however those of the authors only and do not necessarily reflect those of the European Union or the European Research Council. Neither the European Union nor the granting authority can be held responsible for them. The authors gratefully acknowledge the SGR program (2021-SGR-01045) of Generalitat de Catalunya (Catalonia), and the PID2023-150840OA-I00 grant of Agencia Estatal de Investigación (AEI, Spain)., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publication Artículo científico (JournalArticle)

Thermodynamics-informed neural network for recovering supercritical fluid thermophysical information from turbulent velocity data

  • Masclans Serrat, Núria
  • Vázquez-Novoa, Fernando
  • Bernades, Marc|||0000-0003-3761-2038
  • Badia Sala, Rosa Maria|||0000-0003-2941-5499
  • Jofre Cruanyes, Lluís|||0000-0003-2437-259X
Recent research has highlighted the potential of supercritical fluids under high-pressure transcritical conditions to achieve microconfined turbulence as a result of the thermophysical properties they exhibit in the vicinity of the pseudo-boiling region. This has led to increased interest in understanding their hybrid thermophysical properties when operating near the pseudo-boiling transitioning region. However, despite the potential benefits of microfluidic systems working under transcritical conditions, limited experimental data is available due to the inherent challenges of performing experiments at high-pressure conditions. In addition, traditional experimental methods, such as particle image velocimetry and particle tracking velocimetry, are inadequate for measuring thermophysical properties under such conditions, since they are primarily designed for velocity-related data acquisition. In this regard, this work introduces an efficient thermodynamics-informed neural network framework for reconstructing thermophysical information from velocity data in high-pressure turbulent transcritical regimes. The proposed model incorporates thermophysical constraints through a thermodynamics-informed loss function consisting of the residual of the real-gas equation of state and integrates boundary conditions into the network’s architecture to ensure their satisfaction. The performance of the proposed framework is evaluated through the analysis of two test cases and compared against non-physically informed models. The results demonstrate the superior accuracy, robustness, and satisfaction of physical constraints achieved by the proposed model, as well as its ability to reconstruct averaged thermophysical profiles and preserve bulk quantities with a relative error reduction of approximately 2×. In addition, the physically-consistent predictions provided by the model enable a more accurate reconstruction of dependent thermophysical properties., The authors gratefully acknowledge the Formació de Professorat Universitari scholarship (FPU-UPC 2022) of the Universitat Politècnica de Catalunya BarcelonaTech (UPC) (Spain), the SRG program (2021-SGR-01045) of the Generalitat de Catalunya (Spain), the Beatriz Galindo program (Distinguished Researcher, BGP18/00026) of the Ministerio de Educación Formación Profesional (Spain), and the computer resources at FinisTerrae III & MareNostrum and the technical support provided by CESGA & Barcelona Supercomputing Center (RES-IM-2023-1-0005, RES-IM-2023-2-0005). This work is funded by the European Union (ERC, SCRAMBLE, 101040379)., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publication Artículo científico (JournalArticle)

Thermal effects on high-pressure transcritical wall-bounded turbulence

  • Elmansy, Reda Mohamed Yousyf Abdallah|||0000-0002-7484-317X
  • Barea Sánchez, Guillem|||0009-0004-0448-0715
  • Mellibovsky Elstein, Fernando|||0000-0003-0497-9052
  • Jofre Cruanyes, Lluís|||0000-0003-2437-259X
© 2025 Author(s). All article content, except where otherwise noted, is licensed under a Creative Commons Attribution-NonCommercial 4.0 International (CC BY-NC) license (https://creativecommons.org/licenses/by-nc/4.0/), The sustainment of turbulence under high-pressure transcritical conditions is examined using direct numerical simulations of channel flow subject to various combinations of fluid pressure and wall temperatures. The working fluid is carbon dioxide at supercritical reduced pressures P=Pc∈{1.5, 2, 5}P=Pc∈{1.5,2,5} (the subscript cc denotes the critical value) driven through a channel bounded by differentially heated isothermal walls at reduced temperatures Tcw=Tc∈{0.8, 0.9, 0.95}Tcw=Tc∈{0.8,0.9,0.95} (cold wall) and Thw=Tc∈{1.1, 1.2, 1.4}Thw=Tc∈{1.1,1.2,1.4} (hot wall). The resulting friction Reynolds numbers fall within the ranges Rescw∈[56, 111]Rescw∈[56,111] at the cold wall and Reshw∈[118, 167]Reshw∈[118,167] at the hot wall. The computational domain has dimensions (Lx,Ly,Lz)=(2π, 2, 2π/3)d(Lx,Ly,Lz)=(2π,2,2π/3)d in the streamwise, wall-normal, and spanwise directions, corresponding to a minimal flow unit (dd is the channel half-height). The results show that setting the temperature of the hot wall slightly above the pseudo-boiling point, specifically in the range Thw/Tpb∈[1.01, 1.18]Thw/Tpb∈[1.01,1.18], maximizes the Nusselt number associated with both the hot and cold walls, while the bulk and friction Reynolds numbers peak in the narrower range Thw/Tpb∈[1.01, 1.10]Thw/Tpb∈[1.01,1.10]. Furthermore, both turbulent activity and heat transfer across the channel are found to be highest in the early supercritical regime, with pressures just above critical. These findings highlight the importance of tuning the thermophysical parameters precisely if turbulence is to be sustained and heat transfer enhanced in high-pressure transcritical fluid flows., This work was funded by the European Union (ERC, SCRAMBLE, No. 101040379). Views and opinions expressed are, however, those of the authors only and do not necessarily reflect those of the European Union or the European Research Council. Neither the European Union nor the granting authority can be held responsible for them. The authors acknowledge the support from the SGR program (No. 2021-SGR-01045) of the Generalitat de Catalunya (Catalonia) and the No. PID2023-150840OA-I00 grant of the Agencia Estatal de Investigación (AEI, Spain)., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publication Artículo científico (JournalArticle)

Flow regime analysis of high-pressure transcritical fluids in microducts

  • Monteiro, Carlos Alexandre Bandarrinha|||0009-0004-0675-6113
  • Jofre Cruanyes, Lluís|||0000-0003-2437-259X
Microduct flows are known for their inherent laminar regimes resulting from the characteristic small dimensions and low velocities. In this regard, direct numerical simulations are employed to investigate an innovative approach that harnesses the unique thermophysical properties of high-pressure transcritical fluids to achieve significantly higher rates of mixing and heat transfer in microduct geometries. The strategy is based on the sizeable changes in properties that supercritical fluids, at pressures and temperatures exceeding their critical value, undergo across the pseudo-boiling region. To this end, four different cases are considered, and systematically analyzed, in which the bulk pressure and temperature difference between walls are varied. The results obtained indicate that laminar flow prevails at low-pressure conditions, while flow regimes with turbulent characteristics can be achieved when operating at high-pressure conditions with a transversal temperature difference. The transition to the turbulence-like regime is assessed by quantifying variations in velocity and temperature profiles, accompanied by the observation of secondary flow motions. As a result, substantial increases in the Nusselt number of roughly 20×, indicative of enhanced heat transfer, are obtained at the hot wall in comparison to cases with same temperature differences at low pressure., This work is funded by the European Union (ERC, SCRAMBLE, 101040379). Views and opinions expressed are however those of the authors only and do not necessarily reflect those of the European Union or the European Research Council. Neither the European Union nor the granting authority can be held responsible for them., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publication Artículo científico (JournalArticle)

Proper orthogonal decomposition of wall-bounded high-pressure transcritical fluids

  • Barea Sánchez, Guillem|||0009-0004-0448-0715
  • Jofre Cruanyes, Lluís|||0000-0003-2437-259X
This study explores the principal modes of high-pressure transcritical channel flow from direct numerical simulation data. The four cases investigated correspond to CO2 at high-pressure conditions (P/Pc=1.5) confined between a cold/bottom wall (T/Tc=0.8-0.95) and a hot/top wall (T/Tc=1.1-1.4); Pc and Tc correspond, respectively, to the pressure and temperature of the critical point. The bulk velocity ranges between Ub=0.5-1.0¿m/s with corresponding bulk Reynolds numbers of Reb˜1000-2500. The four cases considered are first characterized into laminar and turbulent regimes, followed by an analysis of energy decay using singular value decomposition. This method allows us to identify the most energetic modes of velocity, temperature, and specific isobaric heat capacity for the laminar and turbulent cases considered. The results reveal that fewer modes are needed to represent the hydrodynamics compared to the thermodynamics of the system. The findings also highlight that the pseudo-boiling region, prevalent in high-pressure transcritical systems, disrupts the coherent structures formed (especially) in the hotter region of the flow. Finally, a correlation analysis between the most energetic modes shows an interdependence between velocity and specific isobaric heat capacity modes when conditioned to focus solely on the pseudo-boiling affected regions. This correlation underscores the complex interplay between hydrodynamic and thermodynamic variables in such high-pressure transcritical environments., This work was funded by the European Union (ERC, SCRAMBLE, 101040379). Views and opinions expressed are however those of the authors only and do not necessarily reflect those of the European Union or the European Research Council. Neither the European Union nor the granting authority can be held responsible for them. The authors also gratefully acknowledge the SGR program (2021-SGR-01045) of the Generalitat de Catalunya (Spain) and the computer resources at FinisTerrae III & MareNostrum and the technical support provided by CESGA & Barcelona Supercomputing Center (RES-IM-2023-1-0005, RES-IM-2023-2-0005)., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publication Artículo científico (JournalArticle)

RHEA: an open-source Reproducible Hybrid-architecture flow solver Engineered for Academia

  • Jofre Cruanyes, Lluís|||0000-0003-2437-259X
  • Abdellatif, Ahmed Mohammed Abdelfattah
  • Oyarzun Altamirano, Guillermo|||0000-0001-9524-3782
The study of complex multiscale flows (Groen et al., 2014), like for example the motion of small-scale turbulent eddies over large aerodynamic structures (Jofre & Doostan, 2022), microconfined high-pressure supercritical fluids for enhanced energy transfer (Bernades & Jofre, 2022), or hydrodynamic focusing of microorganisms in wall-bounded flows (Palacios et al., 2022), greatly benefits from the combination of interconnected theoretical, computational and experimental approaches. This manifold methodology provides a robust framework tocorroborate the phenomena observed, validate the modeling assumptions utilized, and facilitatesthe exploration of wider parameter spaces and extraction of more sophisticated insights. These analyses are typically encompassed within the field of Predictive Science & Engineering (Njam, 2009), which has attracted attention in the Fluid Mechanics community and is expected to exponentially grow as computational studies transition from (mostly) physics simulations to active vectors for scientific discovery and technological innovation with the advent of Exascale computing (Alowayyed et al., 2017). In this regard, the computational flow solver presented aims at bridging the gap between studying complex multiscale flow problems and utilizing present and future state-of-the-art supercomputing systems in academic environments.The solver presented is named RHEA, which stands for open-source Reproducible Hybrid-architecture flow solver Engineered for Academia, and is available as an open-source Git repository at https://gitlab.com/ProjectRHEA/flowsolverrhea, Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publication Artículo científico (JournalArticle)

Multiscale flow topologies in microconfined high-pressure transcritical fluid turbulence

  • Barea Sánchez, Guillem|||0009-0004-0448-0715
  • Masclans Serrat, Núria
  • Jofre Cruanyes, Lluís|||0000-0003-2437-259X
The topology of multiscale turbulent motions in a high-pressure transcritical channel flow is studied using direct numerical simulations. In particular, the system analyzed corresponds to high-pressure (P/Pc=2) microconfined turbulence of N2 at transcritical conditions imposed by a temperature difference between the cold (T/Tc=0.75) and hot (T/Tc=1.5) walls for a friction Reynolds number of Ret=100 (cold wall). The invariants of the velocity-gradient, rate-of-strain, and rate-of-rotation tensors are computed at different length scales. The joint probability density functions of the invariants are calculated and conditioned based on the distance from the walls and additionally compared against an equivalent low-pressure case at isothermal conditions. The results indicate that the presence of higher levels of vorticity close to the hot wall significantly impacts the flow topologies in the viscous sublayer. As a result, topology distributions of the velocity-gradient tensor typical from the outer region are observed in the vicinity of the hot wall. Moreover, the second invariants of the rate-of-strain and rate-of-rotation tensors indicate a large probability of vortex sheet events in the hot (supercritical gaslike) region. Finally, at lengths comparable to the density gradient scale, the presence of vortex sheet structures is diminished with respect to the reference low-pressure case to favor more tubelike flow motions. As inferred from the vorticity transport equation, this behavior is connected to the appearance of a baroclinic-type instability generated from the combination of the external force driving the flow and the large variation of density across the pseudoboiling region., This work is funded by the European Union (ERC, SCRAMBLE, Grant No. 101040379). Views and opinions expressed are however those of the authors only and do not necessarily reflect those of the European Union or the European Research Council. Neither the European Union nor the granting authority can be held responsible for them. The authors also acknowledge support from the Beatriz Galindo program (Distinguished Researcher, Grant No. BGP18/00026) of the Ministerio de Ciencia, Innovación y Universidades (Spain), the SRG program (Grant No. 2021-SGR-01045) of the Generalitat de Catalunya (Spain), and the computer resources at FinisTerrae III and the technical support provided by CESGA (Grant No. RES-IM-2023-1-0005)., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publication Artículo científico (JournalArticle)

Supercritical miniaturization of turbulence in microsystems

  • Hurtán Díaz, Enrique|||0009-0006-6133-8525
  • Elmansy, Reda Mohamed Yousyf Abdallah|||0000-0002-7484-317X
  • Jofre Cruanyes, Marc|||0000-0002-8912-6595
  • Farré Lladós, Josep|||0000-0001-5909-0176
  • Casals Terré, Jasmina|||0000-0002-1368-3950
  • Jofre Cruanyes, Lluís|||0000-0003-2437-259X
Open Access This article is licensed under a Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License. http://creativecommons.org/licenses/by-nc-nd/4.0/., The onset of turbulence in microsystems remains a fundamental scientific and engineering challenge due to the dominance of viscous forces at small confined scales. This study, therefore, experimentally demonstrates the concept of Turbulence-On-a-Chip by generating and characterizing turbulent-like flow regimes in microconfined environments under high-pressure transcritical conditions, without the addition of any external force or passive strategy. A custom-built microfluidic test rig is developed to operate with CO2 at supercritical pressures and controlled temperature differences. Flow behavior is analyzed through external flow visualization and 2D time-resolved µPIV, revealing distinct laminar and turbulent-like regimes for the conditions evaluated. Laminar-like cases exhibit organized flow patterns and parabolic velocity profiles, while turbulent-like cases display irregular speckle patterns, particle migration, and optical distortions, indicative of flow destabilization through density-gradient effects. Complementary, direct numerical simulations provide deeper insight into the multiscale flow fluctuations, supporting the experimental results. These findings establish a new framework for microconfined turbulence generation, with ground-breaking implications for microfluidic mass transport and energy transfer., This work is funded by the European Union (ERC, SCRAMBLE, 101040379). Views and opinions expressed are however those of the authors only and do not necessarily reflect those of the European Union or the European Research Council. Neither the European Union nor the granting authority can be held responsible for them. The authors gratefully acknowledge the Formació de Professorat Universitari scholarship (FPU-UPC 2023) of Universitat Politècnica de Catalunya · BarcelonaTech (UPC) (Catalonia), and the SGR program (2021-SGR-01045) of Generalitat de Catalunya (Catalonia)., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publication Artículo científico (JournalArticle)

Microconfined high-pressure transcritical channel flow database: laminar, transitional & turbulent regimes

  • Abdellatif, Ahmed Mohammed Abdelfattah
  • Monteiro, Carlos Alexandre Bandarrinha|||0009-0004-0675-6113
  • Bernades, Marc|||0000-0003-3761-2038
  • Jofre Cruanyes, Lluís|||0000-0003-2437-259X
The potential of comprehending and managing microscale flows to enhance energy processes, especially in heat transfer and propulsion applications, remains largely untapped particularly for supercritical fluids, which have gained increased interest over the past years due to the higher power and thermodynamic efficiencies they provide. This work, therefore, presents the first comprehensive, open-source dataset carefully curated and structured for studying microconfined high-pressure transcritical fluid channel flows under various regimes. Particularly, the dataset contains 18 direct numerical simulations of carbon dioxide at different bulk pressures and velocities confined between differentially-heated walls. For all cases, the thermodynamic conditions selected impose the fluid to undergo a transcritical trajectory across the pseudo-boiling region. The data collection comprises an array of physical quantities that enable comprehensive parametric analyses spanning laminar, transitional, and turbulent flow regimes. This data repository is poised to provide access to the detailed study and modeling of the complex flow physics observed in high-pressure transcritical fluids, especially those closely linked to improving microfluidics performance., This work is funded by the European Union (ERC, SCRAMBLE, 101040379). Views and opinions expressed are however those of the authors only and do not necessarily reflect those of the European Union or the European Research Council. Neither the European Union nor the granting authority can be held responsible for them. The authors gratefully acknowledge the SGR program (2021-SGR-01045) of the Generalitat de Catalunya (Spain), the Beatriz Galindo program (Distinguished Researcher, BGP18/00026) of the Ministerio de Educación y Formación Profesional (Spain), and the computer resources at FinisTerrae III & CTE-AMD and the technical support provided by CESGA & Barcelona Supercomputing Center (RES-IM-2023-1-0005, RES-IM-2023-2-0005)., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publication Artículo científico (JournalArticle)

Resolution standards for direct numerical simulation of wall turbulence in high-pressure transcritical fluids

  • Monteiro, Carlos Alexandre Bandarrinha|||0009-0004-0675-6113
  • Jofre Cruanyes, Lluís|||0000-0003-2437-259X
This study investigates the resolution requirements for direct numerical simulation (DNS) of high-pressure transcritical wall-bounded turbulence, focusing on channel and square duct flow configurations subjected to cold (cw) and hot (hw) walls. The applicability of traditional DNS resolution standards to capture first- and second-order flow statistics is critically assessed, emphasizing the complex thermodynamic and hydrodynamic interactions in transcritical fluid regimes. A comprehensive analysis, incorporating spectrograms, dissipation rate distributions, and distribution of Kolmogorov (gu), Batchelor (gT), and density-gradient (drq) scales has been conducted. The findings reveal that underresolved grids significantly underestimate the intensity and proximity of the pseudo-boiling region to the hot wall, particularly in channel flows where lateral confinement is absent. In contrast, square duct flows benefit from secondary flow motions, which stabilize and stratify structures in the pseudo-boiling region. Using “traditionally standard” grid resolutions, first-order velocity and temperature statistics are captured with errors generally below 2%. However, significant discrepancies arise in the turbulent fluctuations, particularly related to energy dissipation for under-resolved cases. To address these issues, the “standard” grid resolution has been refined to better capture local property gradients, their variance, and resulting hydrodynamic and thermophysical scales. For channel flows, the proposed grid features wall-normal resolution requirements of Dyþ hw < 1 and Dy=gu, Dy=gT 3:5, with streamwise resolutions of Dxþ cw 8, Dxþ hw < 10:0 and Dx=gu, Dx=gT 9:0. Spanwise resolutions are limited to Dzþ cw < 2:5, Dzþ hw < 3:4 and Dz=gu, Dz=gu 3:5. Slightly larger values are applicable for square duct flows. Finally, the resolution requirements obtained are applicable to a wide range of fluids, thermophysical regimes and flow geometries., This work is funded by the European Union (ERC, SCRAMBLE, 101040379). Views and opinions expressed are however those of the authors only and do not necessarily reflect those of the European Union or the European Research Council. Neither the European Union nor the granting authority can be held responsible for them. The authors also acknowledge support from the SGR program (2021-SGR-01045) of the Generalitat de Catalunya (Spain), and the computer resources at FinisTerrae III & MareNostrum and the technical support provided by CESGA & Barcelona Supercomputing Center (RES-IM-2023-1-0005 and RES-IM-2023-2-0005)., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publication Artículo científico (JournalArticle)

Kinetic-energy- and pressure-equilibrium-preserving schemes for real-gas turbulence in the transcritical regime

  • Bernades, Marc|||0000-0003-3761-2038
  • Jofre Cruanyes, Lluís|||0000-0003-2437-259X
  • Capuano, Francesco|||0000-0003-0274-5260
Numerical simulations of compressible turbulent flows governed by real-gas equations of state, such as high-pressure transcritical flows, are strongly susceptible to instabilities. In addition to the inherent multi-scale nature of the flow, the presence of a pseudo-interface can generate spurious pressure oscillations when conventional schemes are utilized. This study proposes a general framework to derive and analyze discretization methods that are able to preserve kinetic energy by convection, and simultaneously maintain pressure equilibrium in discontinuity-free compressible real-gas flows. The formal analysis reveals that the discrete pressure-equilibrium condition can be fulfilled at most to second-order accuracy, as it requires the spatial differential operator to satisfy a discrete chain rule when total, or internal energy, are directly discretized. A novel class of schemes based on the solution of a pressure equation is thus proposed, which preserves mass, momentum, kinetic energy and pressure equilibrium, but not total energy. Extensive numerical tests of increasing complexity confirm the theoretical predictions, and show that the proposed scheme is capable of providing non-dissipative, stable and oscillation-free simulations, unlike existing methods tailored for the transcritical regime., This work is funded by the European Union (ERC, SCRAMBLE, 101040379)., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publication Artículo científico (JournalArticle)

Data-informed characterization of spatio-temporal scales in experiments of microconfined high-pressure transcritical turbulence

  • Hurtán Díaz, Enrique|||0009-0006-6133-8525
  • Monteiro, Carlos Alexandre Bandarrinha|||0009-0004-0675-6113
  • Jofre Cruanyes, Marc|||0000-0002-8912-6595
  • Casals Terré, Jasmina|||0000-0002-1368-3950
  • Jofre Cruanyes, Lluís|||0000-0003-2437-259X
The spatio-temporal scales of microconfined high-pressure transcritical turbulence are characterized in relation to the resolution capabilities of present time-resolved two-dimensional PIV technology. Utilizing as the working fluid, the physical scales are examined by considering the main dimensionless groups of the problem, which correspond to the Reynolds, Brinkman, and Stokes numbers and the mass fraction of particles in the fluid. In detail, the methodology employed leverages direct numerical simulation data to inform the estimation of hydrodynamic, thermophysical, and particle-related scales, and selects a state-of-the-art PIV setup to describe the optical performance of the current technology. The results indicate that the temporal scales can be experimentally captured for a wide range of operating conditions. However, the scenario becomes much more complex when trying to capture the spatial scales of microconfined high-pressure transcritical turbulent flow. Particularly, the Kolmogorov and Batchelor spatial scales can be captured for bulk Reynolds numbers below . Otherwise, the spatial scales can only be partially captured and/or remain completely masked due to insufficient resolution, like for example in the case of boundary layer viscous scales and fluid density variations. This limitation is not imposed by the tracer behavior of microparticles, as the Stokes number remains significantly low for all the system configurations studied. Instead, the limitation is mainly a result of the optical capabilities of present PIV systems. Finally, given the generalizable properties of dimensionless numbers, the results and insight obtained can be extended to other experiments of PIV-based visualization/quantification of microconfined multiscale flows involving large thermophysical variations., This work is funded by the European Union (ERC, SCRAMBLE, 101040379). Views and opinions expressed are however those of the authors only and do not necessarily reflect those of the European Union or the European Research Council. Neither the European Union nor the granting authority can be held responsible for them., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publication Artículo científico (JournalArticle)

Artificial compressibility method for high-pressure transcritical fluids at low Mach numbers

  • Abdellatif, Ahmed Mohammed Abdelfattah
  • Ventosa Molina, Jordi|||0000-0002-8276-5001
  • Grau Barceló, Joan|||0000-0002-2556-9936
  • Torres Cámara, Ricardo|||0000-0001-8030-5522
  • Jofre Cruanyes, Lluís|||0000-0003-2437-259X
Supercritical fluids possess unique properties that makes them relevant in various scientific and engineering applications. However, the experimental investigation of these fluids is challenging due to the high pressures involved and their complex thermophysical behavior. To overcome these limitations, computational researchers employ scale-resolving methods, such as direct numerical simulation and large-eddy simulation to study them. Nonetheless, these methods require substantial computational resources, especially in the case of low-Mach-number regimes due to the disparity between acoustic and hydrodynamic/thermal time scales. This work, therefore, addresses this problem by extending the artificial compressibility method to high-pressure transcritical fluids. This method is based on decoupling the thermodynamic and hydrodynamic parts of the pressure field, such that the acoustic time scales can be externally modified without severely impacting the flow physics of the problem. In addition, the method proposed has two key characteristics: (i) the splitting method presents low computational complexity, and (ii) an automatic strategy for selecting the speedup factor of the approach is introduced. The effectiveness of the resulting methodology is demonstrated through comprehensive numerical tests of increasing complexity, showcasing its ability to accurately simulate a wide range of high-pressure transcritical flows including turbulence. The results obtained indicate that the approach proposed can readily lead to computational speedups larger than without significantly compromising the accuracy of the numerical solutions., This work is funded by the European Union (ERC, SCRAMBLE, 101040379). Views and opinions expressed are however those of the authors only and do not necessarily reflect those of the European Union or the European Research Council. Neither the European Union nor the granting authority can be held responsible for them., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publication Artículo científico (JournalArticle)

Minimal flow unit of wall-bounded high-pressure transcritical turbulence

  • Elmansy, Reda Mohamed Yousyf Abdallah|||0000-0002-7484-317X
  • Monteiro, Carlos Alexandre Bandarrinha|||0009-0004-0675-6113
  • Mellibovsky Elstein, Fernando|||0000-0003-0497-9052
  • Jofre Cruanyes, Lluís|||0000-0003-2437-259X
The minimum domain size required to maintain fully developed wall-bounded turbulent flow in high-pressure transcritical regimes is analyzed using direct numerical simulations. The computations involve carbon dioxide at supercritical conditions with pressure P=Pc ¼ 2 (subscript c denotes critical value), confined between cold (temperature T=Tc ¼ 0:85) and hot (T=Tc ¼ 1:5) isothermal walls. The corresponding friction Reynolds numbers are Res 76 and 123 for the cold and hot walls, respectively. The study considers a large baseline domain of size Lx=d ¼ 4p, Ly=d ¼ 2, and Lz=d ¼ð8=3Þp in the streamwise, wall-normal, and spanwise directions, respectively, with d the half-channel height, as well as truncated setups along the streamwise and/or spanwise directions. The results show that rather small domains are sufficient to reproduce near-wall flow motions, while larger domains are needed to properly capture large-scale structures, especially within the log-law region. Additionally, the study confirms that the distance over which thermal interactions occur is shorter than the typical size of hydrodynamic structures, particularly so in the spanwise direction. This finding suggests that the minimum periodic domain size required in the high-pressure transcritical regime is comparable to that of the minimum flow unit established by other researchers for wall-bounded flows under standard pressure-temperature conditions., This work is funded by the European Union (ERC, SCRAMBLE, 101040379). Views and opinions expressed are, however, those of the authors only and do not necessarily reflect those of the European Union or the European Research Council. Neither the European Union nor the granting authority can be held responsible for them. The authors also acknowledge support from the SGR program (2021-SGR-01045) of the Generalitat de Catalunya (Spain), the PID2023-150840OA-I00 grant of the Agencia Estatal de Investigación (AEI, Spain), and the computer resources at FinisTerrae III & MareNostrum and the technical support provided by CESGA & Barcelona Supercomputing Center (RES-IM-2023-1-0005, RES-IM-2023-2-0005). F.M. acknowledges support from the PID2020-114043GB-I00 and PID2023-150029NB-I00 grants of the AEI., Peer Reviewed
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

Data-informed characterization of spatio-temporal scales in experiments of microconfined high-pressure transcritical turbulence

  • Hurtán Díaz, Enrique
  • Monteiro, Carlos Alexandre Bandarrinha
  • Jofre Cruanyes, Marc
  • Casals Terré, Jasmina
  • Jofre Cruanyes, Lluís
The spatio-temporal scales of microconfined high-pressure transcritical turbulence are characterized in relation to the resolution capabilities of present time-resolved two-dimensional PIV technology. Utilizing as the working fluid, the physical scales are examined by considering the main dimensionless groups of the problem, which correspond to the Reynolds, Brinkman, and Stokes numbers and the mass fraction of particles in the fluid. In detail, the methodology employed leverages direct numerical simulation data to inform the estimation of hydrodynamic, thermophysical, and particle-related scales, and selects a state-of-the-art PIV setup to describe the optical performance of the current technology. The results indicate that the temporal scales can be experimentally captured for a wide range of operating conditions. However, the scenario becomes much more complex when trying to capture the spatial scales of microconfined high-pressure transcritical turbulent flow. Particularly, the Kolmogorov and Batchelor spatial scales can be captured for bulk Reynolds numbers below . Otherwise, the spatial scales can only be partially captured and/or remain completely masked due to insufficient resolution, like for example in the case of boundary layer viscous scales and fluid density variations. This limitation is not imposed by the tracer behavior of microparticles, as the Stokes number remains significantly low for all the system configurations studied. Instead, the limitation is mainly a result of the optical capabilities of present PIV systems. Finally, given the generalizable properties of dimensionless numbers, the results and insight obtained can be extended to other experiments of PIV-based visualization/quantification of microconfined multiscale flows involving large thermophysical variations., This work is funded by the European Union (ERC, SCRAMBLE, 101040379). Views and opinions expressed are however those of the authors only and do not necessarily reflect those of the European Union or the European Research Council. Neither the European Union nor the granting authority can be held responsible for them., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

Proper orthogonal decomposition of wall-bounded high-pressure transcritical fluids

  • Barea Sánchez, Guillem
  • Jofre Cruanyes, Lluís
This study explores the principal modes of high-pressure transcritical channel flow from direct numerical simulation data. The four cases investigated correspond to CO2 at high-pressure conditions (P/Pc=1.5) confined between a cold/bottom wall (T/Tc=0.8-0.95) and a hot/top wall (T/Tc=1.1-1.4); Pc and Tc correspond, respectively, to the pressure and temperature of the critical point. The bulk velocity ranges between Ub=0.5-1.0¿m/s with corresponding bulk Reynolds numbers of Reb˜1000-2500. The four cases considered are first characterized into laminar and turbulent regimes, followed by an analysis of energy decay using singular value decomposition. This method allows us to identify the most energetic modes of velocity, temperature, and specific isobaric heat capacity for the laminar and turbulent cases considered. The results reveal that fewer modes are needed to represent the hydrodynamics compared to the thermodynamics of the system. The findings also highlight that the pseudo-boiling region, prevalent in high-pressure transcritical systems, disrupts the coherent structures formed (especially) in the hotter region of the flow. Finally, a correlation analysis between the most energetic modes shows an interdependence between velocity and specific isobaric heat capacity modes when conditioned to focus solely on the pseudo-boiling affected regions. This correlation underscores the complex interplay between hydrodynamic and thermodynamic variables in such high-pressure transcritical environments., This work was funded by the European Union (ERC, SCRAMBLE, 101040379). Views and opinions expressed are however those of the authors only and do not necessarily reflect those of the European Union or the European Research Council. Neither the European Union nor the granting authority can be held responsible for them. The authors also gratefully acknowledge the SGR program (2021-SGR-01045) of the Generalitat de Catalunya (Spain) and the computer resources at FinisTerrae III & MareNostrum and the technical support provided by CESGA & Barcelona Supercomputing Center (RES-IM-2023-1-0005, RES-IM-2023-2-0005)., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

RHEA: an open-source Reproducible Hybrid-architecture flow solver Engineered for Academia

  • Jofre Cruanyes, Lluís
  • Abdellatif, Ahmed Mohammed Abdelfattah
  • Oyarzun Altamirano, Guillermo
The study of complex multiscale flows (Groen et al., 2014), like for example the motion of small-scale turbulent eddies over large aerodynamic structures (Jofre & Doostan, 2022), microconfined high-pressure supercritical fluids for enhanced energy transfer (Bernades & Jofre, 2022), or hydrodynamic focusing of microorganisms in wall-bounded flows (Palacios et al., 2022), greatly benefits from the combination of interconnected theoretical, computational and experimental approaches. This manifold methodology provides a robust framework tocorroborate the phenomena observed, validate the modeling assumptions utilized, and facilitatesthe exploration of wider parameter spaces and extraction of more sophisticated insights. These analyses are typically encompassed within the field of Predictive Science & Engineering (Njam, 2009), which has attracted attention in the Fluid Mechanics community and is expected to exponentially grow as computational studies transition from (mostly) physics simulations to active vectors for scientific discovery and technological innovation with the advent of Exascale computing (Alowayyed et al., 2017). In this regard, the computational flow solver presented aims at bridging the gap between studying complex multiscale flow problems and utilizing present and future state-of-the-art supercomputing systems in academic environments.The solver presented is named RHEA, which stands for open-source Reproducible Hybrid-architecture flow solver Engineered for Academia, and is available as an open-source Git repository at https://gitlab.com/ProjectRHEA/flowsolverrhea, Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

Thermodynamics-informed neural network for recovering supercritical fluid thermophysical information from turbulent velocity data

  • Masclans Serrat, Núria
  • Vázquez-Novoa, Fernando
  • Bernades, Marc
  • Badia Sala, Rosa Maria
  • Jofre Cruanyes, Lluís
Recent research has highlighted the potential of supercritical fluids under high-pressure transcritical conditions to achieve microconfined turbulence as a result of the thermophysical properties they exhibit in the vicinity of the pseudo-boiling region. This has led to increased interest in understanding their hybrid thermophysical properties when operating near the pseudo-boiling transitioning region. However, despite the potential benefits of microfluidic systems working under transcritical conditions, limited experimental data is available due to the inherent challenges of performing experiments at high-pressure conditions. In addition, traditional experimental methods, such as particle image velocimetry and particle tracking velocimetry, are inadequate for measuring thermophysical properties under such conditions, since they are primarily designed for velocity-related data acquisition. In this regard, this work introduces an efficient thermodynamics-informed neural network framework for reconstructing thermophysical information from velocity data in high-pressure turbulent transcritical regimes. The proposed model incorporates thermophysical constraints through a thermodynamics-informed loss function consisting of the residual of the real-gas equation of state and integrates boundary conditions into the network’s architecture to ensure their satisfaction. The performance of the proposed framework is evaluated through the analysis of two test cases and compared against non-physically informed models. The results demonstrate the superior accuracy, robustness, and satisfaction of physical constraints achieved by the proposed model, as well as its ability to reconstruct averaged thermophysical profiles and preserve bulk quantities with a relative error reduction of approximately 2×. In addition, the physically-consistent predictions provided by the model enable a more accurate reconstruction of dependent thermophysical properties., The authors gratefully acknowledge the Formació de Professorat Universitari scholarship (FPU-UPC 2022) of the Universitat Politècnica de Catalunya BarcelonaTech (UPC) (Spain), the SRG program (2021-SGR-01045) of the Generalitat de Catalunya (Spain), the Beatriz Galindo program (Distinguished Researcher, BGP18/00026) of the Ministerio de Educación Formación Profesional (Spain), and the computer resources at FinisTerrae III & MareNostrum and the technical support provided by CESGA & Barcelona Supercomputing Center (RES-IM-2023-1-0005, RES-IM-2023-2-0005). This work is funded by the European Union (ERC, SCRAMBLE, 101040379)., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

Kinetic-energy- and pressure-equilibrium-preserving schemes for real-gas turbulence in the transcritical regime

  • Bernades, Marc
  • Jofre Cruanyes, Lluís
  • Capuano, Francesco
Numerical simulations of compressible turbulent flows governed by real-gas equations of state, such as high-pressure transcritical flows, are strongly susceptible to instabilities. In addition to the inherent multi-scale nature of the flow, the presence of a pseudo-interface can generate spurious pressure oscillations when conventional schemes are utilized. This study proposes a general framework to derive and analyze discretization methods that are able to preserve kinetic energy by convection, and simultaneously maintain pressure equilibrium in discontinuity-free compressible real-gas flows. The formal analysis reveals that the discrete pressure-equilibrium condition can be fulfilled at most to second-order accuracy, as it requires the spatial differential operator to satisfy a discrete chain rule when total, or internal energy, are directly discretized. A novel class of schemes based on the solution of a pressure equation is thus proposed, which preserves mass, momentum, kinetic energy and pressure equilibrium, but not total energy. Extensive numerical tests of increasing complexity confirm the theoretical predictions, and show that the proposed scheme is capable of providing non-dissipative, stable and oscillation-free simulations, unlike existing methods tailored for the transcritical regime., This work is funded by the European Union (ERC, SCRAMBLE, 101040379)., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

Microconfined high-pressure transcritical channel flow database: laminar, transitional & turbulent regimes

  • Abdellatif, Ahmed Mohammed Abdelfattah
  • Monteiro, Carlos Alexandre Bandarrinha
  • Bernades, Marc
  • Jofre Cruanyes, Lluís
The potential of comprehending and managing microscale flows to enhance energy processes, especially in heat transfer and propulsion applications, remains largely untapped particularly for supercritical fluids, which have gained increased interest over the past years due to the higher power and thermodynamic efficiencies they provide. This work, therefore, presents the first comprehensive, open-source dataset carefully curated and structured for studying microconfined high-pressure transcritical fluid channel flows under various regimes. Particularly, the dataset contains 18 direct numerical simulations of carbon dioxide at different bulk pressures and velocities confined between differentially-heated walls. For all cases, the thermodynamic conditions selected impose the fluid to undergo a transcritical trajectory across the pseudo-boiling region. The data collection comprises an array of physical quantities that enable comprehensive parametric analyses spanning laminar, transitional, and turbulent flow regimes. This data repository is poised to provide access to the detailed study and modeling of the complex flow physics observed in high-pressure transcritical fluids, especially those closely linked to improving microfluidics performance., This work is funded by the European Union (ERC, SCRAMBLE, 101040379). Views and opinions expressed are however those of the authors only and do not necessarily reflect those of the European Union or the European Research Council. Neither the European Union nor the granting authority can be held responsible for them. The authors gratefully acknowledge the SGR program (2021-SGR-01045) of the Generalitat de Catalunya (Spain), the Beatriz Galindo program (Distinguished Researcher, BGP18/00026) of the Ministerio de Educación y Formación Profesional (Spain), and the computer resources at FinisTerrae III & CTE-AMD and the technical support provided by CESGA & Barcelona Supercomputing Center (RES-IM-2023-1-0005, RES-IM-2023-2-0005)., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

Thermal effects on high-pressure transcritical wall-bounded turbulence

  • El Mansy, Reda
  • Barea Sánchez, Guillem
  • Mellibovsky Elstein, Fernando
  • Jofre Cruanyes, Lluís
© 2025 Author(s). All article content, except where otherwise noted, is licensed under a Creative Commons Attribution-NonCommercial 4.0 International (CC BY-NC) license (https://creativecommons.org/licenses/by-nc/4.0/), The sustainment of turbulence under high-pressure transcritical conditions is examined using direct numerical simulations of channel flow subject to various combinations of fluid pressure and wall temperatures. The working fluid is carbon dioxide at supercritical reduced pressures P=Pc∈{1.5, 2, 5}P=Pc∈{1.5,2,5} (the subscript cc denotes the critical value) driven through a channel bounded by differentially heated isothermal walls at reduced temperatures Tcw=Tc∈{0.8, 0.9, 0.95}Tcw=Tc∈{0.8,0.9,0.95} (cold wall) and Thw=Tc∈{1.1, 1.2, 1.4}Thw=Tc∈{1.1,1.2,1.4} (hot wall). The resulting friction Reynolds numbers fall within the ranges Rescw∈[56, 111]Rescw∈[56,111] at the cold wall and Reshw∈[118, 167]Reshw∈[118,167] at the hot wall. The computational domain has dimensions (Lx,Ly,Lz)=(2π, 2, 2π/3)d(Lx,Ly,Lz)=(2π,2,2π/3)d in the streamwise, wall-normal, and spanwise directions, corresponding to a minimal flow unit (dd is the channel half-height). The results show that setting the temperature of the hot wall slightly above the pseudo-boiling point, specifically in the range Thw/Tpb∈[1.01, 1.18]Thw/Tpb∈[1.01,1.18], maximizes the Nusselt number associated with both the hot and cold walls, while the bulk and friction Reynolds numbers peak in the narrower range Thw/Tpb∈[1.01, 1.10]Thw/Tpb∈[1.01,1.10]. Furthermore, both turbulent activity and heat transfer across the channel are found to be highest in the early supercritical regime, with pressures just above critical. These findings highlight the importance of tuning the thermophysical parameters precisely if turbulence is to be sustained and heat transfer enhanced in high-pressure transcritical fluid flows., This work was funded by the European Union (ERC, SCRAMBLE, No. 101040379). Views and opinions expressed are, however, those of the authors only and do not necessarily reflect those of the European Union or the European Research Council. Neither the European Union nor the granting authority can be held responsible for them. The authors acknowledge the support from the SGR program (No. 2021-SGR-01045) of the Generalitat de Catalunya (Catalonia) and the No. PID2023-150840OA-I00 grant of the Agencia Estatal de Investigación (AEI, Spain)., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

Minimal flow unit of wall-bounded high-pressure transcritical turbulence

  • Elmansy, Reda Mohamed Yousyf Abdallah
  • Monteiro, Carlos Alexandre Bandarrinha
  • Mellibovsky Elstein, Fernando
  • Jofre Cruanyes, Lluís
The minimum domain size required to maintain fully developed wall-bounded turbulent flow in high-pressure transcritical regimes is analyzed using direct numerical simulations. The computations involve carbon dioxide at supercritical conditions with pressure P=Pc ¼ 2 (subscript c denotes critical value), confined between cold (temperature T=Tc ¼ 0:85) and hot (T=Tc ¼ 1:5) isothermal walls. The corresponding friction Reynolds numbers are Res 76 and 123 for the cold and hot walls, respectively. The study considers a large baseline domain of size Lx=d ¼ 4p, Ly=d ¼ 2, and Lz=d ¼ð8=3Þp in the streamwise, wall-normal, and spanwise directions, respectively, with d the half-channel height, as well as truncated setups along the streamwise and/or spanwise directions. The results show that rather small domains are sufficient to reproduce near-wall flow motions, while larger domains are needed to properly capture large-scale structures, especially within the log-law region. Additionally, the study confirms that the distance over which thermal interactions occur is shorter than the typical size of hydrodynamic structures, particularly so in the spanwise direction. This finding suggests that the minimum periodic domain size required in the high-pressure transcritical regime is comparable to that of the minimum flow unit established by other researchers for wall-bounded flows under standard pressure-temperature conditions., This work is funded by the European Union (ERC, SCRAMBLE, 101040379). Views and opinions expressed are, however, those of the authors only and do not necessarily reflect those of the European Union or the European Research Council. Neither the European Union nor the granting authority can be held responsible for them. The authors also acknowledge support from the SGR program (2021-SGR-01045) of the Generalitat de Catalunya (Spain), the PID2023-150840OA-I00 grant of the Agencia Estatal de Investigación (AEI, Spain), and the computer resources at FinisTerrae III & MareNostrum and the technical support provided by CESGA & Barcelona Supercomputing Center (RES-IM-2023-1-0005, RES-IM-2023-2-0005). F.M. acknowledges support from the PID2020-114043GB-I00 and PID2023-150029NB-I00 grants of the AEI., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

Supercritical miniaturization of turbulence in microsystems

  • Hurtán Díaz, Enrique
  • El Mansy, Reda
  • Jofre Cruanyes, Marc
  • Farré Lladós, Josep
  • Casals Terré, Jasmina
  • Jofre Cruanyes, Lluís
Open Access This article is licensed under a Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License. http://creativecommons.org/licenses/by-nc-nd/4.0/., The onset of turbulence in microsystems remains a fundamental scientific and engineering challenge due to the dominance of viscous forces at small confined scales. This study, therefore, experimentally demonstrates the concept of Turbulence-On-a-Chip by generating and characterizing turbulent-like flow regimes in microconfined environments under high-pressure transcritical conditions, without the addition of any external force or passive strategy. A custom-built microfluidic test rig is developed to operate with CO2 at supercritical pressures and controlled temperature differences. Flow behavior is analyzed through external flow visualization and 2D time-resolved µPIV, revealing distinct laminar and turbulent-like regimes for the conditions evaluated. Laminar-like cases exhibit organized flow patterns and parabolic velocity profiles, while turbulent-like cases display irregular speckle patterns, particle migration, and optical distortions, indicative of flow destabilization through density-gradient effects. Complementary, direct numerical simulations provide deeper insight into the multiscale flow fluctuations, supporting the experimental results. These findings establish a new framework for microconfined turbulence generation, with ground-breaking implications for microfluidic mass transport and energy transfer., This work is funded by the European Union (ERC, SCRAMBLE, 101040379). Views and opinions expressed are however those of the authors only and do not necessarily reflect those of the European Union or the European Research Council. Neither the European Union nor the granting authority can be held responsible for them. The authors gratefully acknowledge the Formació de Professorat Universitari scholarship (FPU-UPC 2023) of Universitat Politècnica de Catalunya · BarcelonaTech (UPC) (Catalonia), and the SGR program (2021-SGR-01045) of Generalitat de Catalunya (Catalonia)., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

Artificial compressibility method for high-pressure transcritical fluids at low Mach numbers

  • Abdellatif, Ahmed Mohammed Abdelfattah
  • Ventosa Molina, Jordi
  • Grau Barceló, Joan
  • Torres Cámara, Ricardo
  • Jofre Cruanyes, Lluís
Supercritical fluids possess unique properties that makes them relevant in various scientific and engineering applications. However, the experimental investigation of these fluids is challenging due to the high pressures involved and their complex thermophysical behavior. To overcome these limitations, computational researchers employ scale-resolving methods, such as direct numerical simulation and large-eddy simulation to study them. Nonetheless, these methods require substantial computational resources, especially in the case of low-Mach-number regimes due to the disparity between acoustic and hydrodynamic/thermal time scales. This work, therefore, addresses this problem by extending the artificial compressibility method to high-pressure transcritical fluids. This method is based on decoupling the thermodynamic and hydrodynamic parts of the pressure field, such that the acoustic time scales can be externally modified without severely impacting the flow physics of the problem. In addition, the method proposed has two key characteristics: (i) the splitting method presents low computational complexity, and (ii) an automatic strategy for selecting the speedup factor of the approach is introduced. The effectiveness of the resulting methodology is demonstrated through comprehensive numerical tests of increasing complexity, showcasing its ability to accurately simulate a wide range of high-pressure transcritical flows including turbulence. The results obtained indicate that the approach proposed can readily lead to computational speedups larger than without significantly compromising the accuracy of the numerical solutions., This work is funded by the European Union (ERC, SCRAMBLE, 101040379). Views and opinions expressed are however those of the authors only and do not necessarily reflect those of the European Union or the European Research Council. Neither the European Union nor the granting authority can be held responsible for them., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

Resolution standards for direct numerical simulation of wall turbulence in high-pressure transcritical fluids

  • Monteiro, Carlos Alexandre Bandarrinha
  • Jofre Cruanyes, Lluís
This study investigates the resolution requirements for direct numerical simulation (DNS) of high-pressure transcritical wall-bounded turbulence, focusing on channel and square duct flow configurations subjected to cold (cw) and hot (hw) walls. The applicability of traditional DNS resolution standards to capture first- and second-order flow statistics is critically assessed, emphasizing the complex thermodynamic and hydrodynamic interactions in transcritical fluid regimes. A comprehensive analysis, incorporating spectrograms, dissipation rate distributions, and distribution of Kolmogorov (gu), Batchelor (gT), and density-gradient (drq) scales has been conducted. The findings reveal that underresolved grids significantly underestimate the intensity and proximity of the pseudo-boiling region to the hot wall, particularly in channel flows where lateral confinement is absent. In contrast, square duct flows benefit from secondary flow motions, which stabilize and stratify structures in the pseudo-boiling region. Using “traditionally standard” grid resolutions, first-order velocity and temperature statistics are captured with errors generally below 2%. However, significant discrepancies arise in the turbulent fluctuations, particularly related to energy dissipation for under-resolved cases. To address these issues, the “standard” grid resolution has been refined to better capture local property gradients, their variance, and resulting hydrodynamic and thermophysical scales. For channel flows, the proposed grid features wall-normal resolution requirements of Dyþ hw < 1 and Dy=gu, Dy=gT 3:5, with streamwise resolutions of Dxþ cw 8, Dxþ hw < 10:0 and Dx=gu, Dx=gT 9:0. Spanwise resolutions are limited to Dzþ cw < 2:5, Dzþ hw < 3:4 and Dz=gu, Dz=gu 3:5. Slightly larger values are applicable for square duct flows. Finally, the resolution requirements obtained are applicable to a wide range of fluids, thermophysical regimes and flow geometries., This work is funded by the European Union (ERC, SCRAMBLE, 101040379). Views and opinions expressed are however those of the authors only and do not necessarily reflect those of the European Union or the European Research Council. Neither the European Union nor the granting authority can be held responsible for them. The authors also acknowledge support from the SGR program (2021-SGR-01045) of the Generalitat de Catalunya (Spain), and the computer resources at FinisTerrae III & MareNostrum and the technical support provided by CESGA & Barcelona Supercomputing Center (RES-IM-2023-1-0005 and RES-IM-2023-2-0005)., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

Flow regime analysis of high-pressure transcritical fluids in microducts

  • Monteiro, Carlos Alexandre Bandarrinha
  • Jofre Cruanyes, Lluís
Microduct flows are known for their inherent laminar regimes resulting from the characteristic small dimensions and low velocities. In this regard, direct numerical simulations are employed to investigate an innovative approach that harnesses the unique thermophysical properties of high-pressure transcritical fluids to achieve significantly higher rates of mixing and heat transfer in microduct geometries. The strategy is based on the sizeable changes in properties that supercritical fluids, at pressures and temperatures exceeding their critical value, undergo across the pseudo-boiling region. To this end, four different cases are considered, and systematically analyzed, in which the bulk pressure and temperature difference between walls are varied. The results obtained indicate that laminar flow prevails at low-pressure conditions, while flow regimes with turbulent characteristics can be achieved when operating at high-pressure conditions with a transversal temperature difference. The transition to the turbulence-like regime is assessed by quantifying variations in velocity and temperature profiles, accompanied by the observation of secondary flow motions. As a result, substantial increases in the Nusselt number of roughly 20×, indicative of enhanced heat transfer, are obtained at the hot wall in comparison to cases with same temperature differences at low pressure., This work is funded by the European Union (ERC, SCRAMBLE, 101040379). Views and opinions expressed are however those of the authors only and do not necessarily reflect those of the European Union or the European Research Council. Neither the European Union nor the granting authority can be held responsible for them., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

Multiscale flow topologies in microconfined high-pressure transcritical fluid turbulence

  • Barea Sánchez, Guillem
  • Masclans Serrat, Núria
  • Jofre Cruanyes, Lluís
The topology of multiscale turbulent motions in a high-pressure transcritical channel flow is studied using direct numerical simulations. In particular, the system analyzed corresponds to high-pressure (P/Pc=2) microconfined turbulence of N2 at transcritical conditions imposed by a temperature difference between the cold (T/Tc=0.75) and hot (T/Tc=1.5) walls for a friction Reynolds number of Ret=100 (cold wall). The invariants of the velocity-gradient, rate-of-strain, and rate-of-rotation tensors are computed at different length scales. The joint probability density functions of the invariants are calculated and conditioned based on the distance from the walls and additionally compared against an equivalent low-pressure case at isothermal conditions. The results indicate that the presence of higher levels of vorticity close to the hot wall significantly impacts the flow topologies in the viscous sublayer. As a result, topology distributions of the velocity-gradient tensor typical from the outer region are observed in the vicinity of the hot wall. Moreover, the second invariants of the rate-of-strain and rate-of-rotation tensors indicate a large probability of vortex sheet events in the hot (supercritical gaslike) region. Finally, at lengths comparable to the density gradient scale, the presence of vortex sheet structures is diminished with respect to the reference low-pressure case to favor more tubelike flow motions. As inferred from the vorticity transport equation, this behavior is connected to the appearance of a baroclinic-type instability generated from the combination of the external force driving the flow and the large variation of density across the pseudoboiling region., This work is funded by the European Union (ERC, SCRAMBLE, Grant No. 101040379). Views and opinions expressed are however those of the authors only and do not necessarily reflect those of the European Union or the European Research Council. Neither the European Union nor the granting authority can be held responsible for them. The authors also acknowledge support from the Beatriz Galindo program (Distinguished Researcher, Grant No. BGP18/00026) of the Ministerio de Ciencia, Innovación y Universidades (Spain), the SRG program (Grant No. 2021-SGR-01045) of the Generalitat de Catalunya (Spain), and the computer resources at FinisTerrae III and the technical support provided by CESGA (Grant No. RES-IM-2023-1-0005)., Peer Reviewed, Postprint (published version)