Skip to main content

Resultados relacionados

Resultados totales (Incluyendo duplicados): 5
Encontrada(s) 1 página(s)

RUC. Repositorio da Universidade da Coruña
Publication Artículo científico (JournalArticle)

A perspective on lifelong open-ended learning autonomy for robotics through cognitive architectures

  • Romero, Alejandro
  • Bellas, Francisco
  • Duro, Richard J.
[Abstract]: This paper addresses the problem of achieving lifelong open-ended learning autonomy in robotics, and how different cognitive architectures provide functionalities that support it. To this end, we analyze a set of well-known cognitive architectures in the literature considering the different components they address and how they implement them. Among the main functionalities that are taken as relevant for lifelong open-ended learning autonomy are the fact that architectures must contemplate learning, and the availability of contextual memory systems, motivations or attention. Additionally, we try to establish which of them were actually applied to real robot scenarios. It transpires that in their current form, none of them are completely ready to address this challenge, but some of them do provide some indications on the paths to follow in some of the aspects they contemplate. It can be gleaned that for lifelong open-ended learning autonomy, motivational systems that allow finding domain-dependent goals from general internal drives, contextual long-term memory systems that all allow for associative learning and retrieval of knowledge, and robust learning systems would be the main components required. Nevertheless, other components, such as attention mechanisms or representation management systems, would greatly facilitate operation in complex domains., Ministerio de Ciencia e Innovación; PID2021-126220OB-I00, Xunta de Galicia; EDC431C-2021/39, Consellería de Cultura, Educación, Formación Profesional e Universidades; ED431G 2019/01
RUC. Repositorio da Universidade da Coruña
Publication Artículo científico (JournalArticle)

Understanding Joint Range of Motion Development in Robotic Learning

  • Naya-Varela, M.
  • Faíña, Andrés
  • Romero, Alejandro
  • Duro, Richard J.
[Abstract] Joint Range of Motion (JROM) development has been shown to facilitate learning motor control in human beings. This developmental strategy has been applied in robotics to improve learning performance with different outcomes: sometimes it is favourable, others irrelevant, and others, even detrimental. The reasons that underpin this variability in the results are still not well understood. In this paper, we seek to better understand the principles underlying the application of JROM based morphological development to make its use more straightforward. To this end, empirical studies were carried out over two representative use cases: quadruped and bipedal robot morphologies learning to walk. Different parameters of the application of JROM development (morphological configuration, JROM developmental strategy, etc.) have been evaluated to elucidate their effects over learning. The results show that there are significant connections between the reduction of the motor space induced by JROM and the way the exploration and exploitation of the solution space is carried out by the learning algorithm, and the performance achieved. Through these connections, we have identified a set of conditions that must be satisfied for JROM development to be effective as a tool for learning improvement., This research was partially funded by the European Union’s Horizon 2020, Research and Innovation Programme, GA 101070381 (“PILLAR-Robots - Purposeful Intrinsically-motivated Lifelong Learning Autonomous Robots”), by Xunta de Galicia (EDC431C-2021/39 and M. Naya-Varela’s grant ED481B), by the Spanish Science and Education Ministry (PID2021-126220OB-I00), and the Ministry for Digital Transformation and Civil Service and Next-Generation EU/RRF (TSI-100925-2023-1), by “ERDF A way of making Europe’, Centro de Investigación de Galicia “CITIC” (ED431G 2019/01)., Xunta de Galicia; EDC431C-2021/39, Xunta de Galicia; ED481B-2022-004, Xunta de Galicia; ED431G 2019/01
RUC. Repositorio da Universidade da Coruña
Publication Artículo científico (JournalArticle)

Efficient Single-Step Framework for Incremental Class Learning in Neural Networks

  • Dopico Castro, Alejandro
[Abstract]: Incremental learning continues to present a significant challenge in deep learning, particularly in environments where resources are limited. While existing methods have been shown to achieve high levels of accuracy, they often require substantial computational resources and storage capacity. This work proposes CIFNet, an efficient approach to class incremental learning that matches comparable accuracy to state-of-the-art methods while significantly reducing training time and energy consumption through a single-step optimisation process. CIFNet incorporates a novel compressed buffer mechanism that stores condensed representations of previous data samples instead of full raw data, substantially reducing memory requirements. In contrast to conventional approaches that necessitate multiple iterations of weight optimisation, our method achieves optimal performance in a single training step, with no need for iterations, leading to a significant decrease in computational overhead. Experimental results on standard benchmark datasets have shown that our approach inherently mitigates catastrophic forgetting without the need for complex regularization schemes. CIFNet achieves accuracy comparable to current state-of-the-art approaches while significantly reducing training time and energy consumption. This work represents a step forward in making class incremental learning more accessible for resource-constrained environments while maintaining robust performance., This work was partially funded by Horizon Europe, GA 101070381 (‘PILLAR-Robots - Purposeful Intrinsically motivated Lifelong Learning Autonomous Robots’); Project PID2023-147404OB-I00 funded by MCIN/AEI/10.13039/501100011033/ ERDF, UE; Ministry for Digital Trans- formation and Civil Service and ‘Next-GenerationEU’/PRTR under Grant TSI-100925-2023-1; and Xunta de Galicia/FEDER-UE under Grant ED431C 2022/44. CITIC, as Research Center accredited by Galician University System, is funded by “Consellería de Cultura, Educación e Universidade from Xunta de Galicia”, supported in an 80% through ERDF Operational Programme Galicia 2014-2020, and the remaining 20% by “Secretaría Xeral de Universidades” (Grant ED431G 2023/01)., Xunta de Galicia; ED431C 2022/44, Xunta de Galicia; ED431G 2023/01, Traballo fin de mestrado (UDC.FIC). Intelixencia Artificial. Curso 2024/2025
RUC. Repositorio da Universidade da Coruña
Publication Artículo científico (JournalArticle)

Engineering morphological development in a robotic bipedal walking problem: An empirical study

  • Naya-Varela, M.
  • Duro, Richard J.
  • Faíña, Andrés
Financiado para publicación en acceso aberto: Universidade da Coruña/CISUG, [Abstract]: In living beings, the natural development of the body has been shown to facilitate learning. The application of these natural developmental principles in robotics have been considered in different robotic morphologies and scenarios, leading to mixed results. Development was found to be beneficial for learning in some instances, but also irrelevant or detrimental in others. This mix of results and scenarios has allowed researchers to extract some notions about the conditions that must be fulfilled or set to apply morphological development successfully. Notions that we have organized to set a series of design conditions to successfully apply morphological development. Thus, in this article, we are going to focus on the study of one of them that has been frequently addressed by researchers in their studies in very general terms. It can be described as the need to achieve a suitable synergy among the different components involved in the development and learning process: morphological development strategy, controller, task, and learning algorithm. In particular, we have concentrated on empirically determining the influence of five developmental strategies, implemented in different ways, applied at different speeds and deployed in different orders and combinations, over the problem of a NAO robot controlled by an artificial neural network obtained through a neuroevolutionary algorithm learning a bipedal walking task. The results obtained permit providing a more detailed description of what a suitable synergy implies and how it can be utilized to design more successful morphological developmental processes to improve robot learning., Xunta de Galicia ; EDC431C-2021/39, Research supported by the European Commission Horizon program PILLAR-Robots project, grant 101070381, the Xunta de Galicia and the European Regional Development Funds under grant EDC431C-2021/39 and the Spanish Science and Education Ministry through grant PID2021-126220OB-100. We wish to acknowledge the support received from the Centro de Investigación de Galicia ‘‘CITIC”, funded by Xunta de Galicia and the European Union (European Regional Development Fund-Galicia 2014-2020 Program), by grant ED431G 2019/01 and the Centro de Supercomputación de Galicia (CESGA), Xunta de Galicia; ED431G 2019/01
RUC. Repositorio da Universidade da Coruña
Publication Artículo científico (JournalArticle)

An UAV System for Visual Inspection and Wall Thickness Measurements in Ship Surveys

  • López Peña, Fernando
  • Deibe Díaz, Álvaro
  • Orjales, Félix
  • Losada Pita, Javier
Financiado para publicación en acceso aberto: Universidade da Coruña/CISUG, [Abstract] This article presents the development of a UAV system designed to perform visual inspections and thickness measurements in ships’ cargo tanks. That includes the conception and evolution of the different components and subsystems of this UAV system and several tests, including some carried out in actual operating conditions. It also presents a near-wall positioning and propulsion system designed and developed to improve stability and avoid collisions. The paper also describes an articulated arm designed around an EMAT probe for wall thickness measurement. The measurement chain developed for this purpose includes all the electronics and computing necessary to send data in real-time to a ground station. Flying near walls poses challenges that compromises accuracy when approaching each measurement target points. Therefore, the wall approach and departure flight maneuvers are fully automatic. That facilitates and speeds up the inspection task that may require measurements on thousands of locations specified by the surveyor. The proposed UAV system aims to automate and improve the long and expensive surveys and inspections in the marine industry by reducing their time and costs., The help and support of the Navantia Reparaciones shipyard in Ferrol, Spain is gratefully acknowledged. This work was funded by the European Union’s Horizon 2020, research and innovation programme under GA 101070381 (‘PILLAR-Robots’), by MCIN (PID2021-126220OB-I00) and Xunta de Galicia (EDC431C-2021/39), Xunta de Galicia; EDC431C-2021/39