Skip to main content

Resultados relacionados

Resultados totales (Incluyendo duplicados): 10
Encontrada(s) 1 página(s)

Repositori Obert UdL
Publication Artículo científico (JournalArticle)

Innovation trends on high-temperature thermal energy storage to defossilize energy systems

  • Pantaleo, Antonio
  • Trevisan, Silvia
  • Matteucci, Francesco
  • Cabeza, Luisa F.
The EU climate neutrality ambitious goals require breakthrough solutions and innovative products in many technological areas. The need of a transition to a more affordable energy system highlights the importance of new cost-competitive energy storage systems, including thermal energy storage (TES) for waste heat recovery, heating and cooling supply or for the increased flexibility of power systems via power to heat to power. This work focusses on technologically mature or close to market TES solutions, overviewing some of the most promising start-ups active in the sector of mid to high temperature TES for industrial heat applications or power to heat to power. It also discusses key elements to transfer these technologies to products available for market uptake. These key challenges include technical issues, such as control mechanisms, increased durability and stability of the employed materials, devices' reliability and fast dynamic performances to provide grid services or enable demand response; but also the development of new business models and novel approaches to produce revenues. Moreover, the review identifies as a key ingredient for the success in scaling up new TES products and manufacturing lines the capability to fast develop demonstration and first of a kind plants that can increase investors' trust., This project was partially funded by the European Union's Horizon Europe Research and Innovation Programme under grant agreements 101083899 (SHARP-sCO2), 101136000 (SCO2OP-TES), 101084182 (HYBRIDplus), and 101103552 (SUSHEAT). Views and opinions expressed are however those of the author(s) only and do not necessarily reflect those of the EISMEA or CINEA. Neither the European Union nor the granting authority can be held responsible for them. This work was partially funded by the Ministerio de Ciencia e Innovación - Agencia Estatal de Investigación (AEI) (PID2021-123511OB-C31 - MCIN/AEI/10.13039/501100011033/FEDER, UE and RED2018-102431-T). The authors would like to thank the Catalan Government for the quality accreditation given to their research group GREiA (2017 SGR 1537). GREiA is a certified agent TECNIO in the category of technology developers from the Government of Catalonia. This work is partially supported by ICREA under the ICREA Academia programme.
Repositori Obert UdL
Publication Artículo científico (JournalArticle)

Using genetic algorithm based methods for optimal thermal energy storage tank design

  • Mehraj, Nadiya
  • Mateu Piñol, Carles
  • Zsembinszki, Gabriel
  • Cabeza, Luisa F.
This research introduces a novel approach to thermal energy storage (TES) tank design by integrating physics-based modelling with genetic algorithms (GAs). Traditional TES designs face inherent limitations in balancing thermal performance, hydraulic efficiency, and material usage due to restricted exploration of complex parameter spaces. This research developed a computational framework that autonomously generates fractal-inspired TES tank configurations for phase change material (PCM) applications, evaluating designs based on thermal effectiveness, energy density, pressure drop, and geometric uniformity. Unlike previous approaches that merely optimise predefined structures, this methodology generated entirely new configurations through first principles. The optimised design features a three-level hierarchical branching structure with a main pipe length of 110 mm, radius of 13 mm, and branch angle of 49.5°. Performance evaluation across multiple operating conditions demonstrated thermal effectiveness of 0.313 at 1.5 L/min flow rate, energy density reaching 200 MJ/m3 (15–45 °C temperature differential), and remarkably low pressure drops (maximum 10.4 Pa at 6.0 L/min). The design maintained consistent geometric uniformity (0.950) across all tested conditions while achieving 1693 Wh storage capacity in a compact tank. This genetic algorithm optimised design transcended conventional approaches by discovering non-intuitive configurations that would be difficult to identify through traditional engineering methods. The results demonstrated how computational intelligence integrated with physical principles yielded high-performance thermal energy storage systems while maintaining practical manufacturing constraints, potentially advancing renewable energy integration and thermal management applications., This study has received funding from the European Union's Horizon Europe Research and Innovation Programme under grant agreement No. 101103552 (SUSHEAT). Views and opinions expressed are however those of the author(s) only and do not necessarily reflect those of the European Union or CINEA. Neither the European Union nor the granting authority can be held responsible for them. This work was also partially funded by Ministerio de Ciencia e Innovación – Agencia Estatal de Investigación (AEI) - NextGeneration EU (PID2021-123511OB-C31 - MCIN/AEI/10.13039/501100011033/FEDER, UE). This work was also partially funded by Ministerio de Ciencia, Innovación y Universidades - Agencia Estatal de Investigación (AEI) (RED2024-153629-T). This work is partially supported by ICREA under the ICREA Academia programme. The authors would like to thank the Departament de Recerca i Universitats of the Catalan Government for the quality accreditation given to their research group (2021 SGR 01615). GREiA is certified agent TECNIO in the category of technology developers from the Government of Catalonia.
Repositori Obert UdL
Publication Artículo científico (JournalArticle)

Development of a bio-inspired TES tank for heat transfer enhancement in latent heat thermal energy storage systems

  • Cabeza, Luisa F.
  • Mani Kala, Saranprabhu
  • Zsembinszki, Gabriel
  • Vérez, David
  • Risco Amigó, Santiago
  • Borri, Emiliano
Thermal energy storage (TES) systems play a very important part in addressing the energy crisis. Therefore, numerous researchers are striving to improve the efficiency of TES tanks. The TES technology has the potential to reach new heights when the biological behavior of nature is incorporated into the design of TES tanks. By mimicking the branched vein pattern observed in plants and animals, the heat transfer fluid (HTF) tube of a TES tank can enhance the heat transfer surface area, hence improving its thermal efficiency without the need to add other enhancements of heat transfer methods. Accordingly, in this study, a unique additive-manufacturing-based bio-inspired TES tank was designed, developed, and tested. A customized testing setup was used to assess the bio-inspired TES tank's thermal performance. A comparison was made between the bio-inspired TES tank and a conventional shell-and-tube TES tank. The latent TES system's thermal performance was significantly enhanced by the biomimetic approach for the design of a TES tank, even before the optimization of its design. The results showed that, compared to the shell-and-tube TES tank, the bio-inspired TES tank had a higher discharging rate and needed 52% less time to release the stored heat., This study has received funding from the European Union’s Horizon Europe Research and Innovation Programme under grant agreement No. 101103552 (SUSHEAT). However, the views and opinions expressed are those of the author(s) only and do not necessarily reflect those of the European Union or CINEA. Neither the European Union nor the granting authority can be held responsible for them. This work was partially funded by the Ministerio de Ciencia e Innovación—Agencia Estatal de Investigación (AEI) (PID2021-123511OB-C31—MCIN/AEI/10.13039/501100011033/FEDER, UE), Ministerio de Ciencia e Innovación—Agencia Estatal de Investigación (AEI)—NextGeneration EU (TED2021-129462B-I00—MCIN/AEI/10.13039/501100011033/NextGenerationEU/PRTR), and Ministerio de Ciencia e Innovación—Agencia Estatal de Investigación (AEI) (RED2022-134219-T). This work was partially supported by ICREA under the ICREA Academia program.
Repositori Obert UdL
Publication Artículo científico (JournalArticle)

Phase change materials for thermal energy storage in industrial applications

  • Martínez, Franklin R.
  • Borri, Emiliano
  • Mani Kala, Saranprabhu
  • Ushak, Svetlana
  • Cabeza, Luisa F.
This study reports the results of the screening process done to identify viable phase change materials (PCMs) to be integrated in applications in two different temperature ranges: 60–80 °C for mid-temperature applications and 150–250 °C for high-temperature applications. The comprehensive review involved an extensive analysis of scientific literature and commercial material datasheets. A total of 65 PCMs for mid-temperature applications and 36 PCMs for high-temperature applications were identified through this extensive search. Moreover, an extensive experimental characterization of 14 preselected PCMs is included. Experimental techniques including differential scanning calorimetry (DSC), thermogravimetric analysis (TGA) and hot disk were used. The values obtained were compared to the ones found in the available literature and technical datasheets to see potential differences in the thermal behavior., This project was funded by the European Union’s Horizon Europe Research and Innovation Programme under grant agreement 101103552 (SUSHEAT). Views and opinions expressed are however those of the author(s) only and do not necessarily reflect those of the European Union or CINEA. Neither the European Union nor the granting authority can be held responsible for them. This work was partially funded by the Ministerio de Ciencia e Innovacion´ - Agencia Estatal de Investigacion´ (AEI) (PID2021-123511OB-C31 - MCIN/ AEI/10.13039/501100011033/FEDER, UE), and Ministerio de Ciencia e Innovacion´ - Agencia Estatal de Investigacion´ (AEI) (RED2022-134219-T). S. Ushak acknowledges to ANID/PUENTE Nº 1522A0006 and ANID/FONDECYT REGULAR Nº 1231721 projects. This work is partially supported by ICREA under the ICREA Academia programme. The authors would like to thank the Catalan Government for the quality accreditation given to their research group (2021 SGR 01615). GREiA is certified agent TECNIO in the category of technology developers from the Government of Catalonia. Franklin R. Martinez Alcocer thanks the National Doctorate Scholarship for foreign students ANID 2021 Folio 21211932 for the financial support in the research.
Repositori Obert UdL
Publication Artículo científico (JournalArticle)

Optimizing the design of TES tanks for thermal energy storage applications an integrated biomimetic-genetic algorithm approach

  • Mehraj, Nadiya
  • Mateu Piñol, Carles
  • Zsembinszki, Gabriel
  • Cabeza, Luisa F.
Building upon an experimentally validated bio-inspired thermal energy storage (TES) tank design, this study introduced a novel computational framework that integrated genetic algorithms (GA) with biomimetic principles to systematically generate TES tank geometries. Inspired by natural thermal distribution patterns found in vascular networks, the AI-driven methodology explored 13 geometric parameters, focusing on branching structures and spatial distribution, and resulted in computationally generated designs with a 29% increase in heat transfer surface area while maintaining manufacturability constraints within a fixed tank diameter of 150 mm and height of 155 mm. Unlike previous biomimetic TES studies that relied on predefined geometric configurations, this approach developed AI-driven bio-inspired structures within experimentally validated dimensional constraints, ensuring geometric relevance while allowing for broader structural exploration. The resulting designs exhibited key characteristics of high-efficiency bio-inspired configurations while providing a systematic, scalable methodology for TES tank architecture. This study represented the first step in integrating AI-driven biomimicry into TES tank design, establishing a structured framework for generating high-performance, manufacturable configurations. While the current work focused on computational design, future research will emphasize experimental validation and real-world implementation to confirm the practical thermal and structural benefits of these AI-generated bio-inspired designs. By bridging the gap between computational intelligence and nature-inspired engineering, this research provided a scalable pathway for developing more efficient, manufacturable, and sustainable TES solutions for energy storage applications., Funding: This study has received funding from the European Union’s Horizon Europe Research and Innovation Programme under grant agreement No. 101103552 (SUSHEAT). Views and opinions expressed are, however, those of the author(s) only and do not necessarily reflect those of the European Union or CINEA. Neither the European Union nor the granting authority can be held responsible for them. This work was also partially funded by Ministerio de Ciencia e Innovación—Agencia Estatal de Investigación (AEI)—NextGeneration EU (TED2021-129462BI00— MCIN/AEI/10.13039/501100011033/ NextGenerationEU/PRTR, PID2021-123511OB-C31— MCIN/AEI/10.13039/501100011033/FEDER, UE, and RED2022-134219-T). Acknowledgments: This work is partially supported by ICREA under the ICREA Academia programme. The authors would like to thank the Departament de Recerca i Universitats of the Catalan Government for the quality accreditation given to their research group (2021 SGR 01615). GREiA is certified agent TECNIO in the category of technology developers from the Government of Catalonia.
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

Phase change materials for thermal energy storage in industrial applications

  • Martínez, Franklin R.
  • Borri, Emiliano
  • Mani Kala, Saranprabhu
  • Ushak, Svetlana
  • Cabeza, Luisa F.
This study reports the results of the screening process done to identify viable phase change materials (PCMs) to be integrated in applications in two different temperature ranges: 60–80 °C for mid-temperature applications and 150–250 °C for high-temperature applications. The comprehensive review involved an extensive analysis of scientific literature and commercial material datasheets. A total of 65 PCMs for mid-temperature applications and 36 PCMs for high-temperature applications were identified through this extensive search. Moreover, an extensive experimental characterization of 14 preselected PCMs is included. Experimental techniques including differential scanning calorimetry (DSC), thermogravimetric analysis (TGA) and hot disk were used. The values obtained were compared to the ones found in the available literature and technical datasheets to see potential differences in the thermal behavior., This project was funded by the European Union’s Horizon Europe Research and Innovation Programme under grant agreement 101103552 (SUSHEAT). Views and opinions expressed are however those of the author(s) only and do not necessarily reflect those of the European Union or CINEA. Neither the European Union nor the granting authority can be held responsible for them. This work was partially funded by the Ministerio de Ciencia e Innovacion´ - Agencia Estatal de Investigacion´ (AEI) (PID2021-123511OB-C31 - MCIN/ AEI/10.13039/501100011033/FEDER, UE), and Ministerio de Ciencia e Innovacion´ - Agencia Estatal de Investigacion´ (AEI) (RED2022-134219-T). S. Ushak acknowledges to ANID/PUENTE Nº 1522A0006 and ANID/FONDECYT REGULAR Nº 1231721 projects. This work is partially supported by ICREA under the ICREA Academia programme. The authors would like to thank the Catalan Government for the quality accreditation given to their research group (2021 SGR 01615). GREiA is certified agent TECNIO in the category of technology developers from the Government of Catalonia. Franklin R. Martinez Alcocer thanks the National Doctorate Scholarship for foreign students ANID 2021 Folio 21211932 for the financial support in the research.
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

Innovation trends on high-temperature thermal energy storage to defossilize energy systems

  • Pantaleo, Antonio
  • Trevisan, Silvia
  • Matteucci, Francesco
  • Cabeza, Luisa F.
The EU climate neutrality ambitious goals require breakthrough solutions and innovative products in many technological areas. The need of a transition to a more affordable energy system highlights the importance of new cost-competitive energy storage systems, including thermal energy storage (TES) for waste heat recovery, heating and cooling supply or for the increased flexibility of power systems via power to heat to power. This work focusses on technologically mature or close to market TES solutions, overviewing some of the most promising start-ups active in the sector of mid to high temperature TES for industrial heat applications or power to heat to power. It also discusses key elements to transfer these technologies to products available for market uptake. These key challenges include technical issues, such as control mechanisms, increased durability and stability of the employed materials, devices' reliability and fast dynamic performances to provide grid services or enable demand response; but also the development of new business models and novel approaches to produce revenues. Moreover, the review identifies as a key ingredient for the success in scaling up new TES products and manufacturing lines the capability to fast develop demonstration and first of a kind plants that can increase investors' trust., This project was partially funded by the European Union's Horizon Europe Research and Innovation Programme under grant agreements 101083899 (SHARP-sCO2), 101136000 (SCO2OP-TES), 101084182 (HYBRIDplus), and 101103552 (SUSHEAT). Views and opinions expressed are however those of the author(s) only and do not necessarily reflect those of the EISMEA or CINEA. Neither the European Union nor the granting authority can be held responsible for them. This work was partially funded by the Ministerio de Ciencia e Innovación - Agencia Estatal de Investigación (AEI) (PID2021-123511OB-C31 - MCIN/AEI/10.13039/501100011033/FEDER, UE and RED2018-102431-T). The authors would like to thank the Catalan Government for the quality accreditation given to their research group GREiA (2017 SGR 1537). GREiA is a certified agent TECNIO in the category of technology developers from the Government of Catalonia. This work is partially supported by ICREA under the ICREA Academia programme.
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

Using genetic algorithm based methods for optimal thermal energy storage tank design

  • Mehraj, Nadiya
  • Mateu Piñol, Carles
  • Zsembinszki, Gabriel
  • Cabeza, Luisa F.
This research introduces a novel approach to thermal energy storage (TES) tank design by integrating physics-based modelling with genetic algorithms (GAs). Traditional TES designs face inherent limitations in balancing thermal performance, hydraulic efficiency, and material usage due to restricted exploration of complex parameter spaces. This research developed a computational framework that autonomously generates fractal-inspired TES tank configurations for phase change material (PCM) applications, evaluating designs based on thermal effectiveness, energy density, pressure drop, and geometric uniformity. Unlike previous approaches that merely optimise predefined structures, this methodology generated entirely new configurations through first principles. The optimised design features a three-level hierarchical branching structure with a main pipe length of 110 mm, radius of 13 mm, and branch angle of 49.5°. Performance evaluation across multiple operating conditions demonstrated thermal effectiveness of 0.313 at 1.5 L/min flow rate, energy density reaching 200 MJ/m3 (15–45 °C temperature differential), and remarkably low pressure drops (maximum 10.4 Pa at 6.0 L/min). The design maintained consistent geometric uniformity (0.950) across all tested conditions while achieving 1693 Wh storage capacity in a compact tank. This genetic algorithm optimised design transcended conventional approaches by discovering non-intuitive configurations that would be difficult to identify through traditional engineering methods. The results demonstrated how computational intelligence integrated with physical principles yielded high-performance thermal energy storage systems while maintaining practical manufacturing constraints, potentially advancing renewable energy integration and thermal management applications., This study has received funding from the European Union's Horizon Europe Research and Innovation Programme under grant agreement No. 101103552 (SUSHEAT). Views and opinions expressed are however those of the author(s) only and do not necessarily reflect those of the European Union or CINEA. Neither the European Union nor the granting authority can be held responsible for them. This work was also partially funded by Ministerio de Ciencia e Innovación – Agencia Estatal de Investigación (AEI) - NextGeneration EU (PID2021-123511OB-C31 - MCIN/AEI/10.13039/501100011033/FEDER, UE). This work was also partially funded by Ministerio de Ciencia, Innovación y Universidades - Agencia Estatal de Investigación (AEI) (RED2024-153629-T). This work is partially supported by ICREA under the ICREA Academia programme. The authors would like to thank the Departament de Recerca i Universitats of the Catalan Government for the quality accreditation given to their research group (2021 SGR 01615). GREiA is certified agent TECNIO in the category of technology developers from the Government of Catalonia.
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

Development of a bio-inspired TES tank for heat transfer enhancement in latent heat thermal energy storage systems

  • Cabeza, Luisa F.
  • Mani Kala, Saranprabhu
  • Zsembinszki, Gabriel
  • Vérez, David
  • Risco Amigó, Santiago
  • Borri, Emiliano
Thermal energy storage (TES) systems play a very important part in addressing the energy crisis. Therefore, numerous researchers are striving to improve the efficiency of TES tanks. The TES technology has the potential to reach new heights when the biological behavior of nature is incorporated into the design of TES tanks. By mimicking the branched vein pattern observed in plants and animals, the heat transfer fluid (HTF) tube of a TES tank can enhance the heat transfer surface area, hence improving its thermal efficiency without the need to add other enhancements of heat transfer methods. Accordingly, in this study, a unique additive-manufacturing-based bio-inspired TES tank was designed, developed, and tested. A customized testing setup was used to assess the bio-inspired TES tank's thermal performance. A comparison was made between the bio-inspired TES tank and a conventional shell-and-tube TES tank. The latent TES system's thermal performance was significantly enhanced by the biomimetic approach for the design of a TES tank, even before the optimization of its design. The results showed that, compared to the shell-and-tube TES tank, the bio-inspired TES tank had a higher discharging rate and needed 52% less time to release the stored heat., This study has received funding from the European Union’s Horizon Europe Research and Innovation Programme under grant agreement No. 101103552 (SUSHEAT). However, the views and opinions expressed are those of the author(s) only and do not necessarily reflect those of the European Union or CINEA. Neither the European Union nor the granting authority can be held responsible for them. This work was partially funded by the Ministerio de Ciencia e Innovación—Agencia Estatal de Investigación (AEI) (PID2021-123511OB-C31—MCIN/AEI/10.13039/501100011033/FEDER, UE), Ministerio de Ciencia e Innovación—Agencia Estatal de Investigación (AEI)—NextGeneration EU (TED2021-129462B-I00—MCIN/AEI/10.13039/501100011033/NextGenerationEU/PRTR), and Ministerio de Ciencia e Innovación—Agencia Estatal de Investigación (AEI) (RED2022-134219-T). This work was partially supported by ICREA under the ICREA Academia program.
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

Optimizing the design of TES tanks for thermal energy storage applications an integrated biomimetic-genetic algorithm approach

  • Mehraj, Nadiya
  • Mateu Piñol, Carles
  • Zsembinszki, Gabriel
  • Cabeza, Luisa F.
Building upon an experimentally validated bio-inspired thermal energy storage (TES) tank design, this study introduced a novel computational framework that integrated genetic algorithms (GA) with biomimetic principles to systematically generate TES tank geometries. Inspired by natural thermal distribution patterns found in vascular networks, the AI-driven methodology explored 13 geometric parameters, focusing on branching structures and spatial distribution, and resulted in computationally generated designs with a 29% increase in heat transfer surface area while maintaining manufacturability constraints within a fixed tank diameter of 150 mm and height of 155 mm. Unlike previous biomimetic TES studies that relied on predefined geometric configurations, this approach developed AI-driven bio-inspired structures within experimentally validated dimensional constraints, ensuring geometric relevance while allowing for broader structural exploration. The resulting designs exhibited key characteristics of high-efficiency bio-inspired configurations while providing a systematic, scalable methodology for TES tank architecture. This study represented the first step in integrating AI-driven biomimicry into TES tank design, establishing a structured framework for generating high-performance, manufacturable configurations. While the current work focused on computational design, future research will emphasize experimental validation and real-world implementation to confirm the practical thermal and structural benefits of these AI-generated bio-inspired designs. By bridging the gap between computational intelligence and nature-inspired engineering, this research provided a scalable pathway for developing more efficient, manufacturable, and sustainable TES solutions for energy storage applications., Funding: This study has received funding from the European Union’s Horizon Europe Research and Innovation Programme under grant agreement No. 101103552 (SUSHEAT). Views and opinions expressed are, however, those of the author(s) only and do not necessarily reflect those of the European Union or CINEA. Neither the European Union nor the granting authority can be held responsible for them. This work was also partially funded by Ministerio de Ciencia e Innovación—Agencia Estatal de Investigación (AEI)—NextGeneration EU (TED2021-129462BI00— MCIN/AEI/10.13039/501100011033/ NextGenerationEU/PRTR, PID2021-123511OB-C31— MCIN/AEI/10.13039/501100011033/FEDER, UE, and RED2022-134219-T). Acknowledgments: This work is partially supported by ICREA under the ICREA Academia programme. The authors would like to thank the Departament de Recerca i Universitats of the Catalan Government for the quality accreditation given to their research group (2021 SGR 01615). GREiA is certified agent TECNIO in the category of technology developers from the Government of Catalonia.