Skip to main content

Resultados relacionados

Resultados totales (Incluyendo duplicados): 8
Encontrada(s) 1 página(s)

UPCommons. Portal del coneixement obert de la UPC
Publication Artículo científico (JournalArticle)

Implementation of a single-phase SPH pneumatic power take-off model for small- and full-scale OWC devices within DualSPHysics

  • Mina, Beatrice
  • Tagliaferro, Bonaventura
  • Martinez Estevez, Ivan
  • Altomare, Corrado|||0000-0001-8817-0431
  • Gómez Gesteira, Moncho
  • Malara, Giovanni
  • Arena, Felice
The authors acknowledge the meaningful comments and suggestions provided by Prof A.J.C. Crespo (University of Vigo, Spain) and Dr J.M. Domínguez (University of Vigo, Spain). This paper and related research have been conducted during and with the support of the Italian national inter-university PhD course in Sustainable Development and Climate Change, Italy (link: www.phd-sdc.it). This work was partially supported by the project SURVIWEC PID2020-113245RB-I00 financed by MCIN/AEI/10.13039/50110 0011033 and by the project ED431C 2021/44 “Programa de Consolidación e Estructuración de Unidades de Investigación Competitivas” financed by Xunta de Galicia, Consellería de Cultura, Educación e Universidade, Spain. Grant TED2021-129479A-I00 funded by Ministerio de Ciencia e Innovacion (MCIN/AEI/10. 13039/501100 011033) and by the “European Union NextGenerationEU/PRTR”. We acknowledge EuroHPC JU for awarding the project ID EHPC-REG-2024R02-084 access to MareNostrum5 ACC hosted by the Barcelona Supercomputing Center (Spain). B. Mina acknowledges fundings from MODENERLANDS COST Action CA20109 “Modular Energy Islands for Sustainability and Resilience” supporting an STSM at the Universitat Politècnica de Catalunya – BarcelonaTech (Spain). B. Tagliafierro acknowledges the European Union’s Horizon 2020 research and innovation programme under the Marie Skłodowska-Curie grant agreement No: 101109440 (IM–POWER). Dr. Corrado Altomare acknowledges funding from the Spanish government and the European Social Found (ESF), Spain under the programme ‘Ramón y Cajal 2020’ (RYC2020-030197-I/AEI/10.13039/501100011033) and within the project GLORIA PID 2020-115030RJ-I00 “Adquirir conocimientos sobre el riesgo de rebase para las zonas costeras urbanizadas” (MCIN/AEI/10.13039/501100011033)., A versatile single-phase implementation to model the pneumatic power take-off (PTO) of fixed and floating oscillating water column (OWC) devices is proposed within the Lagrangian software DualSPHysics. The OWCs’ PTO converts wave energy into electricity, exploiting the compression and decompression of air trapped inside the device chamber. The numerical modeling of such a physical phenomenon is a crucial aspect in guaranteeing accuracy in energy conversion performance estimations, especially at full scale. It is, however, a challenging task in meshless environments like Smoothed Particle Hydrodynamics (SPH), adopted herein. Proper physical representation in single-phase models, or high computational effort in multi-phase approaches, indeed, limit the application of SPH to date. In this work, it is developed a mono-phase SPH model coupled with an analytical chamber model, which adequately describes the air pressure variation inside the chamber without sharpening the computational cost, allowing for inclusion of air compressibility effects. This implementation is validated against experimental results concerning fixed OWCs, and is employed to investigate the behavior of the same devices at full scale, confirming the relevance of air compressibility in the latter case, as assessed by consolidated mesh-based findings. Moreover, both the compressible and incompressible pneumatic formulations of the proposed method are validated against laboratory tests over a heaving OWC, constituting one of the first investigations that takes into account air compressibility when studying a floating OWC device. In addition, hydrodynamics studies are performed and presented to visualize the flow behavior near the devices of interest., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publication Artículo científico (JournalArticle)

Coupling between an SPH-based fluid solver and mooring dynamics for floating offshore devices: DualSPHysics and MoorDynPlus

  • Martinez Estevez, Ivan
  • Tagliafierro, Bonaventura|||0000-0001-9171-3038
  • Domínguez Alonso, José Manuel
  • Marzeddu, Andrea|||0000-0001-9515-7323
  • De Castro Rodríguez, María Teresa
  • Cabrera Crespo, Alejandro Jacobo
This paper presents a two-way coupling methodology between the robust Smoothed Particle Hydrodynamics (SPH)-based fluid solver DualSPHysics and the lumped-mass mooring dynamics solver MoorDynPlus. Such integration enables accurate and efficient simulation of the complex hydrodynamic interactions between floating structures and their mooring systems, and is well suited to address wave–structure interaction, including extreme wave conditions. Details of the mooring solver and the coupling framework formed by DualSPHysics-MoorDynPlus are presented, highlighting the proposed methodology implementation for efficient data exchange between the two solvers. The coupled model is rigorously validated against a comprehensive experimental dataset obtained from a dedicated research campaign conducted as part of the SURVIWEC project, which tested two 1:15 scale model devices – one equipped with taut moorings and the other with catenary moorings – subjected to a variety of wave conditions, including regular and focused wave trains. The presented results demonstrate that the DualSPHysics-MoorDynPlus model can accurately predict the dynamic response of the floating structures, including their motions and the associated mooring line tensions. It effectively captures non-linear hydrodynamic effects, which are crucial for assessing the survivability of offshore structures under extreme wave conditions. This work provides a valuable tool for the design and analysis of offshore renewable energy devices, as well as other marine structures operating in challenging ocean environments., Funding for open access charge: Universidade de Vigo/CISUG, Spain. This work was supported by the project SURVIWEC PID2020-113245RB-I00 financed by MCIN/AEI/10.13039/501100011033. It was also partially supported by Xunta de Galicia under project ED431C 2021/44 (Grupos de Referencia Competitiva); by the project TED2021-129479 A-100 (SAFE project) funded by MCIN/AEI/ 10.13039/501100011033 of the Government of Spain, and the “European Union NextGenerationEU/PRTR”; by the project CienciasMariñas-MRR C286 (Programa de Ciencias Mariñas BDNS20 654075) funded by the “European Union NextGenerationEU/PRTR C17, i1”; and by INTERREG-POCTEP Program under project CAPTA (Code: 0062_CAPTA_1_E). I. Martínez-Estévez acknowledges funding from Xunta de Galicia under “Programa de axudas á etapa posdoutoral da Consellería de Educación, Ciencia, Universidades e Formación Profesional da Xunta de Galicia” (ED481B-2025/086). B. Tagliafierro acknowledges the European Union’s Horizon 2020 research and innovation programme under the Marie Skłodowska-Curie grant agreement No: 101109440 (IM-POWER). J.M. Domínguez acknowledges funding from the grant CNS2022-136073 funded by MCIN/AEI/10.13039/501100011033 and by “European Union NextGenerationEU/PRTR” and the grant RYC2022-038341-I funded by MCIN/AEI/10.13039/501100011033 and by “ESF Investing in your future”.
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

Coupling between an SPH-based fluid solver and mooring dynamics for floating offshore devices: DualSPHysics and MoorDynPlus

  • Martinez Estevez, Ivan
  • Tagliafierro, Bonaventura
  • Domínguez Alonso, José Manuel
  • Marzeddu, Andrea
  • De Castro Rodríguez, María Teresa
  • Cabrera Crespo, Alejandro Jacobo
This paper presents a two-way coupling methodology between the robust Smoothed Particle Hydrodynamics (SPH)-based fluid solver DualSPHysics and the lumped-mass mooring dynamics solver MoorDynPlus. Such integration enables accurate and efficient simulation of the complex hydrodynamic interactions between floating structures and their mooring systems, and is well suited to address wave–structure interaction, including extreme wave conditions. Details of the mooring solver and the coupling framework formed by DualSPHysics-MoorDynPlus are presented, highlighting the proposed methodology implementation for efficient data exchange between the two solvers. The coupled model is rigorously validated against a comprehensive experimental dataset obtained from a dedicated research campaign conducted as part of the SURVIWEC project, which tested two 1:15 scale model devices – one equipped with taut moorings and the other with catenary moorings – subjected to a variety of wave conditions, including regular and focused wave trains. The presented results demonstrate that the DualSPHysics-MoorDynPlus model can accurately predict the dynamic response of the floating structures, including their motions and the associated mooring line tensions. It effectively captures non-linear hydrodynamic effects, which are crucial for assessing the survivability of offshore structures under extreme wave conditions. This work provides a valuable tool for the design and analysis of offshore renewable energy devices, as well as other marine structures operating in challenging ocean environments., Funding for open access charge: Universidade de Vigo/CISUG, Spain. This work was supported by the project SURVIWEC PID2020-113245RB-I00 financed by MCIN/AEI/10.13039/501100011033. It was also partially supported by Xunta de Galicia under project ED431C 2021/44 (Grupos de Referencia Competitiva); by the project TED2021-129479 A-100 (SAFE project) funded by MCIN/AEI/ 10.13039/501100011033 of the Government of Spain, and the “European Union NextGenerationEU/PRTR”; by the project CienciasMariñas-MRR C286 (Programa de Ciencias Mariñas BDNS20 654075) funded by the “European Union NextGenerationEU/PRTR C17, i1”; and by INTERREG-POCTEP Program under project CAPTA (Code: 0062_CAPTA_1_E). I. Martínez-Estévez acknowledges funding from Xunta de Galicia under “Programa de axudas á etapa posdoutoral da Consellería de Educación, Ciencia, Universidades e Formación Profesional da Xunta de Galicia” (ED481B-2025/086). B. Tagliafierro acknowledges the European Union’s Horizon 2020 research and innovation programme under the Marie Skłodowska-Curie grant agreement No: 101109440 (IM-POWER). J.M. Domínguez acknowledges funding from the grant CNS2022-136073 funded by MCIN/AEI/10.13039/501100011033 and by “European Union NextGenerationEU/PRTR” and the grant RYC2022-038341-I funded by MCIN/AEI/10.13039/501100011033 and by “ESF Investing in your future”., Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

Implementation of a single-phase SPH pneumatic power take-off model for small- and full-scale OWC devices within DualSPHysics

  • Mina, Beatrice
  • Tagliaferro, Bonaventura
  • Martinez Estevez, Ivan
  • Altomare, Corrado
  • Gómez Gesteira, Moncho
  • Malara, Giovanni
  • Arena, Felice
The authors acknowledge the meaningful comments and suggestions provided by Prof A.J.C. Crespo (University of Vigo, Spain) and Dr J.M. Domínguez (University of Vigo, Spain). This paper and related research have been conducted during and with the support of the Italian national inter-university PhD course in Sustainable Development and Climate Change, Italy (link: www.phd-sdc.it). This work was partially supported by the project SURVIWEC PID2020-113245RB-I00 financed by MCIN/AEI/10.13039/50110 0011033 and by the project ED431C 2021/44 “Programa de Consolidación e Estructuración de Unidades de Investigación Competitivas” financed by Xunta de Galicia, Consellería de Cultura, Educación e Universidade, Spain. Grant TED2021-129479A-I00 funded by Ministerio de Ciencia e Innovacion (MCIN/AEI/10. 13039/501100 011033) and by the “European Union NextGenerationEU/PRTR”. We acknowledge EuroHPC JU for awarding the project ID EHPC-REG-2024R02-084 access to MareNostrum5 ACC hosted by the Barcelona Supercomputing Center (Spain). B. Mina acknowledges fundings from MODENERLANDS COST Action CA20109 “Modular Energy Islands for Sustainability and Resilience” supporting an STSM at the Universitat Politècnica de Catalunya – BarcelonaTech (Spain). B. Tagliafierro acknowledges the European Union’s Horizon 2020 research and innovation programme under the Marie Skłodowska-Curie grant agreement No: 101109440 (IM–POWER). Dr. Corrado Altomare acknowledges funding from the Spanish government and the European Social Found (ESF), Spain under the programme ‘Ramón y Cajal 2020’ (RYC2020-030197-I/AEI/10.13039/501100011033) and within the project GLORIA PID 2020-115030RJ-I00 “Adquirir conocimientos sobre el riesgo de rebase para las zonas costeras urbanizadas” (MCIN/AEI/10.13039/501100011033)., A versatile single-phase implementation to model the pneumatic power take-off (PTO) of fixed and floating oscillating water column (OWC) devices is proposed within the Lagrangian software DualSPHysics. The OWCs’ PTO converts wave energy into electricity, exploiting the compression and decompression of air trapped inside the device chamber. The numerical modeling of such a physical phenomenon is a crucial aspect in guaranteeing accuracy in energy conversion performance estimations, especially at full scale. It is, however, a challenging task in meshless environments like Smoothed Particle Hydrodynamics (SPH), adopted herein. Proper physical representation in single-phase models, or high computational effort in multi-phase approaches, indeed, limit the application of SPH to date. In this work, it is developed a mono-phase SPH model coupled with an analytical chamber model, which adequately describes the air pressure variation inside the chamber without sharpening the computational cost, allowing for inclusion of air compressibility effects. This implementation is validated against experimental results concerning fixed OWCs, and is employed to investigate the behavior of the same devices at full scale, confirming the relevance of air compressibility in the latter case, as assessed by consolidated mesh-based findings. Moreover, both the compressible and incompressible pneumatic formulations of the proposed method are validated against laboratory tests over a heaving OWC, constituting one of the first investigations that takes into account air compressibility when studying a floating OWC device. In addition, hydrodynamics studies are performed and presented to visualize the flow behavior near the devices of interest., Peer Reviewed, Postprint (published version)
Investigo. Repositorio Institucional de la Universidade de Vigo
Publication Artículo científico (JournalArticle)

Implementation of a single-phase SPH pneumatic power take-off model for small- and full-scale OWC devices within DualSPHysics

  • Mina, Beatrice
  • Tagliafierro, Bonaventura
  • Martinez Estevez, Iván
  • Altomare, Corrado
  • Gómez Gesteira, Ramon
  • Malara, Giovanni
  • Arena, Felice
A versatile single-phase implementation to model the pneumatic power take-off (PTO) of fixed and floating oscillating water column (OWC) devices is proposed within the Lagrangian software DualSPHysics. The OWCs’ PTO converts wave energy into electricity, exploiting the compression and decompression of air trapped inside the device chamber. The numerical modeling of such a physical phenomenon is a crucial aspect in guaranteeing accuracy in energy conversion performance estimations, especially at full scale. It is, however, a challenging task in meshless environments like Smoothed Particle Hydrodynamics (SPH), adopted herein. Proper physical representation in single-phase models, or high computational effort in multiphase approaches, indeed, limit the application of SPH to date. In this work, it is developed a mono-phase SPH model coupled with an analytical chamber model, which adequately describes the air pressure variation inside the chamber without sharpening the computational cost, allowing for inclusion of air compressibility effects. This implementation is validated against experimental results concerning fixed OWCs, and is employed to investigate the behavior of the same devices at full scale, confirming the relevance of air compressibility in the latter case, as assessed by consolidated mesh-based findings. Moreover, both the compressible and incompressible pneumatic formulations of the proposed method are validated against laboratory tests over a heaving OWC, constituting one of the first investigations that takes into account air compressibility when studying a floating OWC device. In addition, hydrodynamics studies are performed and presented to visualize the flow behavior near the devices of interest., Agencia Estatal de Investigación | Ref. PID2020-113245RB-I00, Xunta de Galicia | Ref. ED431C 2021/44, Agencia Estatal de Investigación | Ref. TED2021-129479A-I00, EuroHPC JU | Ref. EHPC-REG-2024R02-084, Universitat Politècnica de Catalunya, Agencia Estatal de Investigación | Ref. RYC2020-030197-I, Agencia Estatal de Investigación | Ref. PID2020-115030RJ-I00
Investigo. Repositorio Institucional de la Universidade de Vigo
Publication Artículo científico (JournalArticle)

Implementation and validation of DualSPHysics v5.4 for the simulation of four representative benchmarks of wave energy converters

  • Tagliafierro, Bonaventura
  • Martinez Estevez, Iván
  • Capasso, Salvatore
  • Domínguez Alonso, José Manuel
  • Gómez Gesteira, Ramon
  • Brito, Moisés
  • Clemente, Daniel
  • Altomare, Corrado
  • Viccione, Giacomo
  • Engström, Jens
  • Coe, Ryan G.
  • Bacelli, Giorgio
  • Fourtakas, Georgios
  • Stansby, Peter K.
  • Rogers, B.D.
  • Göteman, Malin
  • Cabrera Crespo, Alejandro Jacobo
This article describes the numerical framework implemented in DualSPHysics v5.4 for the highfidelity simulation of wave energy converters (WECs), providing systematic re-validation, under a single current code version and with open-access input files, of four experimental benchmarks representative of the current state of the art in WEC technology. The framework integrates Smoothed Particle Hydrodynamics (SPH) for fluid dynamics, coupled with Project Chrono for rigid body and multibody dynamics, MoorDynPlus for mooring line dynamics, combined with a suite of wave generation tools. The four validated WEC configurations cover a broad range of device types, mooring arrangements, and power take-off systems. Quantitative agreement with experimental data is assessed using the normalized root mean squared error for three spatial resolutions for each case. All input files, executable configurations, and reference data series are made openly available under a CC BY 4.0 license., Fundação para a Ciência e a Tecnologia | Ref. UID/00667, Agencia Estatal de Investigación | Ref. RYC2020-030197-I, US Department of Energy’s Water Power Technologies Office | Ref. DE-NA0003525
Investigo. Repositorio Institucional de la Universidade de Vigo
Publication Artículo científico (JournalArticle)

Coupling between an SPH-based fluid solver and mooring dynamics for floating offshore devices: DualSPHysics and MoorDynPlus

  • Martinez Estevez, Iván
  • Tagliafierro, B.
  • Domínguez Alonso, José Manuel
  • Marzeddu, A.
  • De Castro Rodriguez, Maria Teresa
  • Cabrera Crespo, Alejandro Jacobo
This paper presents a two-way coupling methodology between the robust Smoothed Particle Hydrodynamics (SPH)-based fluid solver DualSPHysics and the lumped-mass mooring dynamics solver MoorDynPlus. Such integration enables accurate and efficient simulation of the complex hydrodynamic interactions between floating structures and their mooring systems, and is well suited to address wave–structure interaction, including extreme wave conditions. Details of the mooring solver and the coupling framework formed by DualSPHysicsMoorDynPlus are presented, highlighting the proposed methodology implementation for efficient data exchange between the two solvers. The coupled model is rigorously validated against a comprehensive experimental dataset obtained from a dedicated research campaign conducted as part of the SURVIWEC project, which tested two 1:15 scale model devices – one equipped with taut moorings and the other with catenary moorings – subjected to a variety of wave conditions, including regular and focused wave trains. The presented results demonstrate that the DualSPHysics-MoorDynPlus model can accurately predict the dynamic response of the floating structures, including their motions and the associated mooring line tensions. It effectively captures nonlinear hydrodynamic effects, which are crucial for assessing the survivability of offshore structures under extreme wave conditions. This work provides a valuable tool for the design and analysis of offshore renewable energy devices, as well as other marine structures operating in challenging ocean environments., Agencia Estatal de Investigación | Ref. PID2020-113245RB-I00, Xunta de Galicia | Ref. ED431C 2021/44, Agencia Estatal de Investigación | Ref. TED2021-129479 A-100, Comisión Europea, Xunta de Galicia | Ref. ED481B-2025/086, Agencia Estatal de Investigación | Ref. CNS2022-136073, Agencia Estatal de Investigación | Ref. RYC2022-038341-I, Universidade de Vigo/CISUG
Investigo. Repositorio Institucional de la Universidade de Vigo
Publication Artículo científico (JournalArticle)

SPH-integrated chamber model applied to floating OWC devices: 2-D and 3-D analysis

  • Mina, Beatrice
  • Martinez Estevez, Iván
  • Tagliafierro, Bonaventura
  • Cabrera Crespo, Alejandro Jacobo
  • Gómez Gesteira, Ramon
  • Malara, Giovanni
  • Arena, Felice
In this work, we present the implementation and validation of an analytical chamber model, coupled to a single-phase Smoothed Particle Hydrodynamics (SPH) approach, to mimic the pneumatic power take-off (PTO) characterizing an Oscillating Water Column (OWC) wave energy converter. The power extraction mechanism of OWCs relies on the compression and decompression of an air pocket placed above a water column within the device chamber, which oscillates due to the incoming waves. A reliable PTO modeling is crucial in order to estimate and optimize the energy conversion performance of this kind of WECs. Usually, the pneumatic PTO is simulated via two-phase mesh-based techniques, which are quite effective when dealing with fixed OWCs. Whereas, meshless methods like SPH have proven their feasibility in modeling floating devices and free surface flows, but are less efficient when two phases (air and water) are involved, due to their higher computational cost. Hereby, instead, an alternative procedure that envisions the integration of an analytical chamber model within a single-phase SPH approach is carried out and implemented in the open source code DualSPHysics. In this paper, such a methodology is adopted and validated, against experiments, while replicating the behavior of a 2-D floating OWC and it is then employed to estimate the response of a 3-D floating OWC. A numerical power output study for the latter configuration is provided as well. To the authors knowledge, this work represents the first attempt at modeling the pneumatic PTO of floating OWC devices through an SPH technique., Agencia Estatal de Investigación | Ref. PID2020-113245RB-I00, Xunta de Galicia | Ref. ED431C 2021/44, Agencia Estatal de Investigación | Ref. TED2021-129479A-I00, Comisión Europea, Ocean College Zhejiang University, Universitat Politècnica de Catalunya, Xunta de Galicia | Ref. ED481B-2025/086