Skip to main content

Resultados relacionados

Resultados totales (Incluyendo duplicados): 4
Encontrada(s) 1 página(s)

DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Advanced methyltriethoxysilane-modified silazane coating with enhanced durability and corrosion protection

  • Moghaddam, P.N.
  • Merino, Emilia
  • Durán, Alicia
  • Galusek, Dusan
  • Pakseresht, Amirhossein
  • Parchovianský, Milan
  • Castro Martín, Yolanda
The present study aims to evaluate the effect of incorporating methyltriethoxysilane (MTES) into the Durazane 1800 backbone and to investigate how this modification influences the coating properties. The synthesis of MTES-modified polysilazane sols involved pre-hydrolysis of MTES via the sol-gel method, followed by its incorporation into the Durazane 1800 backbone. Furthermore, the modification of Durazane 1800 backbone involved the use of some catalysts such as tetra-n-butylammonium fluoride (TBAF) and dicumyl peroxide (DCP). Fourier-transform infrared spectroscopy (FTIR) was employed to analyze the structural changes in the modified polysilazane. The most promising MTES-modified polysilazane sol was deposited as a coating on AISI 304 stainless steel, followed by heat treatment at 100 °C. FTIR analysis showed that the incorporation of MTES increased the cross-linking density and improved the curing of the polysilazane-derived network at low temperature. The MTES-modified polysilazane coatings have improved physical and chemical properties, including strong adhesion, high water contact angle (104°), and uniform thickness of 5 μm. Electrochemical impedance spectroscopy (EIS) and polarization tests demonstrated excellent corrosion protection, with an impedance modulus of 1.34 × 109 Ω·cm2and a corrosion current density of 1 × 10−10 A·cm−2, respectively. Additionally, the coatings showed strong chemical resistance to acidic and oxidative environments and effective self-cleaning performance. © 2025 The Authors. Published by Elsevier B.V. This is an open access article under the CC BY license. http://creativecommons.org/licenses/by/4.0/, This project is part of dissemination activities of the MICINN project TED2021-131258B-I00. Funding from HORIZON-EIC-2023-PATHFINDEROPEN- 01-Proposal number 101129967-Everglass is acknowledged. The authors also gratefully acknowledge the financial support from the project APVV 22-0070., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Influence of the BF3·O(C2H5)2 on the corrosion resistance of hybrid silica sol-gel coatings deposited on flash-PEO-treated Mg alloy

  • Merino, Emilia
  • Cere, S.
  • Ozcan, O.
  • Dimper, M.
  • Sobrados, Isabel
  • Durán, Alicia
  • Castro Martín, Yolanda
Achieving highly cross-linked sol-gel coatings to provide effective corrosion protection of Mg alloys remains a challenging task. The aim of this work is to evaluate the effect boron trifluoride diethyl etherate (BF3·O(C2H5)2) as catalyst to epoxy group in a GPTMS/TEOS/SiO2 sol and assesses its effect on the structure and corrosion resistance properties of Flash-PEO coated pre-treated Mg alloy. 29Si MAS NMR and 13C CPMAS-NMR demonstrated that (BF3·O(C2H5)2) efficiently promotes the epoxy polymerization of the GPTMS and the formation of a hybrid silica network. However, the amount of (BF3·O(C2H5)2) should be optimized to minimize the formation of undesirable byproducts such as ethyl ether terminal units. Therefore, GPTMS/TEOS/SiO2 sols containing different amounts of (BF3·O(C2H5)2) were synthesized and deposited onto the Flash-PEO coated Mg alloy, leading to bilayer systems with a total thickness of ⁓8 μm. The corrosion behavior of the bilayer coatings in 3.5 wt% NaCl solution was evaluated by electrochemical impedance spectroscopy (EIS) and Scanning Kelvin probe microscope (SKPFM). The results revealed that the barrier properties of the coatings with enhanced cross-linked structure showed impedance modulus (│Z│f:0.1 Hz) approximately four orders of magnitude higher than the bare magnesium alloy and two orders of magnitude higher than the F-PEO coated sample. A suitable compromise between (BF3·O(C2H5)2) amount and sol-gel film structure is required to obtain a more durable barrier coating capable to extend the protective lifespan of the magnesium alloy. © 2025 Elsevier B.V., This project is part of dissemination activities of the MICINN project TED2021-131258B-I00. Funding from HORIZON-EIC-2023-PATHFIN DEROPEN-01-Proposal number 101129967-Everglass is acknowledged, Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Recycling technologies and applications of borosilicate glasses

  • Gorni, Giulio
  • Comesaña, Rafael
  • Pou, Juan
  • Pascual, M. Jesús
Borosilicate glasses, known for their thermal resistance, chemical inertness, and mechanical strength, play a crucial role in technical applications as well as in the pharmaceutical industry. Despite their widespread use and versatility, most borosilicate glass wastes (BSGW) end up in landfills or are incinerated, rendering this valuable resource useless. This review provides an overview of recycling strategies for borosilicate glasses, with emphasis on technological approaches and potential applications spanning building and construction, insulation and filtering, functional materials, and materials for radiation shielding or nuclear waste immobilization, as well as opportunities for material recovery within the ceramics and glass industry or a source of boron or other critical raw materials. The economic viability and life cycle assessment (LCA) of GW recycling are addressed, considering energy consumption, scalability, and output quality across various technologies versus virgin material production. Furthermore, the review considers policies, such as the European Union's goal of fully recyclable packaging by 2030, and discusses limitations and challenges, such as the need to sterilize pharmaceutical GW and contamination risks of borosilicate GW streams with soda lime glass, as well as commercialization barriers and incentive schemes to promote BSGW recycling. New perspectives based on laser processing of borosilicate GW are also shown and aimed to open pathways toward full recyclability of these materials. This approach contributes not only to improved environmental sustainability but also promotes the use of BSGW in advanced technological applications. Finally, research priorities and underexplored areas are discussed to inspire and guide future investigations. © The Author(s) 2026. This article is distributed under the terms of the Creative Commons Attribution-NonCommercial 4.0 License (https://creativecommons.org/licenses/by-nc/4.0/) which permits non-commercial use, reproduction and distribution of the work without further permission provided the original work is attributed as specified on the SAGE and Open Access page (https://us.sagepub.com/en-us/nam/open-access-at-sage)., This work was partially supported by the EU research project EVERGLASS (HORIZON EUROPE. Program HORIZONEIC- 2023-PATHFINDEROPEN-01 (PN:101129967)), Government of Spain [MCI/AEI/FEDER, UE (PID2022-138763OA-100), and by Xunta de Galicia (ED431C 2023/25)., Peer reviewed
Investigo. Repositorio Institucional de la Universidade de Vigo
Publication Artículo científico (JournalArticle)

Femtosecond laser surface texturing of pure zinc for biomedical applications

  • Gago Vidal, Bruno
  • Calvo Garcia, Erik
  • González Quintas, Mario
  • Pérez Alfaro, Rubén
  • Fernández Pérez, Hugo
  • Pou Álvarez, Pablo
  • Comesaña Piñeiro, Rafael
  • Badaoui Fernández, Aida
  • Pou Saracho, Juan María
  • Riveiro Rodríguez, Antonio
Femtosecond laser surface texturing is a promising technique to tune the corrosion behavior of biodegradable materials to better match tissue healing rates. Zinc stands out for its biodegradability, moderate corrosion rate, and low corrosion product accumulation, but the effects of laser texturing parameters on its degradation rate have not been fully explored yet. This work investigates femtosecond laser texturing of pure zinc, evaluating the effects of laser intensity, scanning speed, pitch, and number of passes on surface properties and corrosion performance. The ultrashort laser pulses enabled precise surface structuring through localized material removal while limiting the heat affected zone, with an increase in the surface oxygen content of the textured samples. The influence of laser texturing parameters was assessed using a statistically planned approach. All laser variables significantly affected roughness, leading to a regression model with an adjusted-R2 of 0.99. Higher roughness also enhanced surface hydrophobicity. Laser-treated samples were subjected to immersion tests over 14 days in NaCl solution, which caused significant mass losses and increased solution pH, both strongly dependent on the laser radiant exposure. In general, laser-treated samples exhibited lower mass losses and pH changes than non-treated zinc, which is attributed to the formation of the protective oxide layer generated during laser treatments. The maximum Zn2+ concentration was reached on the first day and subsequently decreased over time due to the precipitation of corrosion products. These results demonstrate the possibility of tailoring the degradation behavior of zinc surfaces for biomedical applications., Agencia Estatal de Investigación | Ref. PID2020-117900RB-I00, Agencia Estatal de Investigación | Ref. PID2022-138763OA-I00, Xunta de Galicia | Ref. ED431C 2023/25, Universidade de Vigo/CISUG