Skip to main content

Resultados relacionados

Resultados totales (Incluyendo duplicados): 5
Encontrada(s) 1 página(s)

DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Picos: A hardware runtime architecture support for OmpSs

  • Yazdanpanah, Fahimeh
  • Álvarez, Carlos
  • Jimenez, Daniel A.
  • Badia, Rosa M.
  • Valero, Mateo
© 2015 Elsevier B.V. All rights reserved. OmpSs is a programming model that provides a simple and powerful way of annotating sequential programs to exploit heterogeneity and task parallelism based on runtime data dependency analysis, dataflow scheduling and out-of-order task execution; it has greatly influenced Version 4.0 of the OpenMP standard. The current implementation of OmpSs achieves those capabilities with a pure-software runtime library: Nanos++. Therefore, although powerful and easy to use, the performance benefits of exploiting fine-grained (pico) task parallelism are limited by the software runtime overheads. To overcome this handicap we propose Picos, an implementation of the Task Superscalar (TSS) architecture that provides hardware support to the OmpSs programming model. Picos is a novel hardware dataflow-based task scheduler that dynamically analyzes inter-task dependencies and identifies task-level parallelism at run-time. In this paper, we describe the Picos Hardware Design and the latencies of the main functionality of its components, based on the synthesis of their VHDL design. We have implemented a full cycle-accurate simulator based on those latencies to perform a design exploration of the characteristics and number of its components in a reasonable amount of time. Finally, we present a comparison of the Picos and Nanos++ runtime performance scalability with a set of real benchmarks. With Picos, a programmer can achieve ideal scalability using aggressive parallel strategies with a large number of fine granularity tasks., This work is supported by the Spanish Government through Programa Severo Ochoa (SEV-2011-0067), by the Spanish Ministry of Science and Technology through TIN2012-34557 project, by the Generalitat de Catalunya (contract 2009-SGR-980), by the European FP7 project TERAFLUX id. 249013 and by the European Research Council under the European Union’s 7th FP, ERC Grant Agreement number 321253. We also thank the Xilinx University Program for its hardware and software donations, Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publication Artículo científico (JournalArticle)

Optimizing the exploitation of multicore processors and GPUs with OpenMP and OpenCL

  • Ferrer, Roger
  • Planas Carbonell, Judit|||0000-0002-8221-7988
  • Bellens, Pieter
  • Duran González, Alejandro
  • González Tallada, Marc|||0000-0002-3780-1106
  • Martorell Bofill, Xavier|||0000-0002-0417-3430
  • Badia Sala, Rosa Maria|||0000-0003-2941-5499
  • Ayguadé Parra, Eduard|||0000-0002-5146-103X
  • Labarta Mancho, Jesús José|||0000-0002-7489-4727
In this paper, we present OMPSs, a programming model based on OpenMP and StarSs, that can also incorporate the use of OpenCL or CUDA kernels. We evaluate the proposal on three different architectures, SMP, Cell/B.E. and GPUs, showing the wide usefulness of the approach. The evaluation is done with four different benchmarks, Matrix Multiply, BlackScholes, Perlin Noise, and Julia Set. We compare the results obtained with the execution of the same benchmarks written in OpenCL, in the same architectures. The results show that OMPSs greatly outperforms the OpenCL environment. It is more flexible to exploit multiple accelerators. And due to the simplicity of the annotations, it increases programmer’s productivity, Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publication Artículo científico (JournalArticle)

Picos: A hardware runtime architecture support for OmpSs

  • Yazdanpanah Ahmadabadi, Fahimeh
  • Álvarez Martínez, Carlos|||0000-0003-0536-5183
  • Jiménez González, Daniel|||0000-0001-6064-7883
  • Badia Sala, Rosa Maria|||0000-0003-2941-5499
  • Valero Cortés, Mateo|||0000-0003-2917-2482
OmpSs is a programming model that provides a simple and powerful way of annotating sequential programs to exploit heterogeneity and task parallelism based on runtime data dependency analysis, dataflow scheduling and out-of-order task execution; it has greatly influenced Version 4.0 of the OpenMP standard. The current implementation of OmpSs achieves those capabilities with a pure-software runtime library: Nanos++. Therefore, although powerful and easy to use, the performance benefits of exploiting fine-grained (pico) task parallelism are limited by the software runtime overheads. To overcome this handicap we propose Picos, an implementation of the Task Superscalar (TSS) architecture that provides hardware support to the OmpSs programming model. Picos is a novel hardware dataflow-based task scheduler that dynamically analyzes inter-task dependencies and identifies task-level parallelism at run-time. In this paper, we describe the Picos Hardware Design and the latencies of the main functionality of its components, based on the synthesis of their VHDL design. We have implemented a full cycle-accurate simulator based on those latencies to perform a design exploration of the characteristics and number of its components in a reasonable amount of time. Finally, we present a comparison of the Picos and Nanos++ runtime performance scalability with a set of real benchmarks. With Picos, a programmer can achieve ideal scalability using aggressive parallel strategies with a large number of fine granularity tasks., This work is supported by the Spanish Government through Programa Severo Ochoa (SEV-2011-0067), by the Spanish Ministry of Science and Technology through TIN2012-34557 project, by the Generalitat de Catalunya (contract 2009-SGR-980), by the European FP7 project TERAFLUX id. 249013 and by the European Research Council under the European Union’s 7th FP, ERC Grant Agreement number 321253. We also thank the Xilinx University Program for its hardware and software donations., Peer Reviewed
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

Picos: A hardware runtime architecture support for OmpSs

  • Yazdanpanah Ahmadabadi, Fahimeh
  • Álvarez Martínez, Carlos
  • Jiménez González, Daniel
  • Badia Sala, Rosa Maria
  • Valero Cortés, Mateo
OmpSs is a programming model that provides a simple and powerful way of annotating sequential programs to exploit heterogeneity and task parallelism based on runtime data dependency analysis, dataflow scheduling and out-of-order task execution; it has greatly influenced Version 4.0 of the OpenMP standard. The current implementation of OmpSs achieves those capabilities with a pure-software runtime library: Nanos++. Therefore, although powerful and easy to use, the performance benefits of exploiting fine-grained (pico) task parallelism are limited by the software runtime overheads. To overcome this handicap we propose Picos, an implementation of the Task Superscalar (TSS) architecture that provides hardware support to the OmpSs programming model. Picos is a novel hardware dataflow-based task scheduler that dynamically analyzes inter-task dependencies and identifies task-level parallelism at run-time. In this paper, we describe the Picos Hardware Design and the latencies of the main functionality of its components, based on the synthesis of their VHDL design. We have implemented a full cycle-accurate simulator based on those latencies to perform a design exploration of the characteristics and number of its components in a reasonable amount of time. Finally, we present a comparison of the Picos and Nanos++ runtime performance scalability with a set of real benchmarks. With Picos, a programmer can achieve ideal scalability using aggressive parallel strategies with a large number of fine granularity tasks., This work is supported by the Spanish Government through Programa Severo Ochoa (SEV-2011-0067), by the Spanish Ministry of Science and Technology through TIN2012-34557 project, by the Generalitat de Catalunya (contract 2009-SGR-980), by the European FP7 project TERAFLUX id. 249013 and by the European Research Council under the European Union’s 7th FP, ERC Grant Agreement number 321253. We also thank the Xilinx University Program for its hardware and software donations., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

Optimizing the exploitation of multicore processors and GPUs with OpenMP and OpenCL

  • Ferrer, Roger
  • Planas Carbonell, Judit
  • Bellens, Pieter
  • Duran González, Alejandro
  • González Tallada, Marc
  • Martorell Bofill, Xavier
  • Badia Sala, Rosa Maria
  • Ayguadé Parra, Eduard
  • Labarta Mancho, Jesús José
In this paper, we present OMPSs, a programming model based on OpenMP and StarSs, that can also incorporate the use of OpenCL or CUDA kernels. We evaluate the proposal on three different architectures, SMP, Cell/B.E. and GPUs, showing the wide usefulness of the approach. The evaluation is done with four different benchmarks, Matrix Multiply, BlackScholes, Perlin Noise, and Julia Set. We compare the results obtained with the execution of the same benchmarks written in OpenCL, in the same architectures. The results show that OMPSs greatly outperforms the OpenCL environment. It is more flexible to exploit multiple accelerators. And due to the simplicity of the annotations, it increases programmer’s productivity, Peer Reviewed, Postprint (published version)