Skip to main content

Resultados relacionados

Resultados totales (Incluyendo duplicados): 5
Encontrada(s) 1 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

A Joining Procedure and Synchronization for TSCH-RPL Wireless Sensor Networks

  • Vera-Pérez, Jose
  • Todoli Ferrandis, David
  • Santonja Climent, Salvador
  • Silvestre-Blanes, Javier|||0000-0001-7091-0040
  • Sempere Paya, Víctor Miguel|||0000-0001-9271-2010
[EN] Wireless Sensor Networks have become a key enabler for Industrial Internet of Things (IoT) applications; however, to adapt to the derived robust communication requirements, deterministic and scheduled medium access should be used, along with other features, such as channel hopping and frequency diversity. Implementing these mechanisms requires a correct synchronization of all devices in the network, a stage in deployment that can lead to non-operational networks. The present article presents an analysis of such situations and possible solutions, including the common current approaches and recommendations, and proposes a new beacon advertising method based on a specific Trickle Timer for the Medium Access Control (MAC) Time-Slotted Channel Hopping (TSCH) layer, decoupling from the timers in the network and routing layers. With this solution, improvements in connection success, time to join, and energy consumption can be obtained for the widely extended IEEE802.15.4e standard., This work has been supported by the SCOTT Project (Secure Connected Trustable Things), (www.scottproject.eu), which has received funding from the Electronic Component Systems for European Leadership Joint Undertaking under grant agreement No 737422. This Joint Undertaking receives support from the European Union's Horizon 2020 research and innovation programme, and from Austria, Spain, Finland, Ireland, Sweden, Germany, Poland, Portugal, Netherlands, Belgium, and Norway.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Bell-X, An Opportunistic Time Synchronization Mechanism for Scheduled Wireless Sensor Networks

  • Vera-Pérez, José
  • TODOLI FERRANDIS, DAVID
  • Silvestre-Blanes, Javier|||0000-0001-7091-0040
  • Sempere Paya, Víctor Miguel|||0000-0001-9271-2010
[EN] The Industrial Internet of Things (IIoT) is having an ever greater impact on industrial processes and the manufacturing sector, due the capabilities of massive data collection and interoperability with plant processes, key elements that are focused on the implementation of Industry 4.0. Wireless Sensor Networks (WSN) are one of the enabling technologies of the IIoT, due its self-configuration and self-repair capabilities to deploy ad-hoc networks. High levels of robustness and reliability, which are necessary in industrial environments, can be achieved by using the Time-Slotted Channel Hopping (TSCH) medium access the mechanism of the IEEE 802.15.4e protocol, penalizing other features, such as network connection and formation times, given that a new node does not know, a priori, the scheduling used by the network. This article proposes a new beacon advertising approach for a fast synchronization for networks under the TSCH-Medium Access Control (MAC) layer and Routing Protocol for Low-Power and Lossy Networks (RPL). This new method makes it possible to speed up the connection times of new nodes in an opportunistic way, while reducing the consumption and advertising traffic generated by the network., This work has been supported by the SCOTT project (Secure COnnected Trustable Things) (www.scottproject.eu), which has received funding from the Electronic Component Systems for European Leadership Joint Undertaking under grant agreement No. 737422. This Joint Undertaking receives support from the European Union's Horizon 2020 research and innovation programme, and from Austria, Spain, Finland, Ireland, Sweden, Germany, Poland, Portugal, Netherlands, Belgium and Norway. It has also been funded by Generalitat Valenciana through the "Instituto Valenciano de Competitividad Empresarial - IVACE", and by the MCyU (Spanish Ministry of Science and Universities) under the project ATLAS (PGC2018-094151-B-I00), which is partially funded by AEI, FEDER and EU.
Archivo Digital UPM
Publication Artículo científico (JournalArticle)

A modular iot hardware platform for distributed and secured extreme edge computing

  • Merino Calero, Pablo
  • Mujica Rojas, Gabriel Noe|||0000-0002-2964-2846
  • Señor Sánchez, Jaime|||0000-0001-7695-9152
  • Portilla Berrueco, Jorge|||0000-0003-4896-6229
Archivo Digital UPM
Publication Artículo científico (JournalArticle)

3D-LIDAR Based Object Detection and Tracking on the Edge of IoT for Railway Level Crossing

  • Wisultschew Puigdellivol, Cristian|||0000-0002-1434-9516
  • Mujica Rojas, Gabriel Noe|||0000-0002-2964-2846
  • Lanza Gutiérrez, José Manuel|||0000-0002-9699-3398
  • Portilla Berrueco, Jorge|||0000-0003-4896-6229
e_Buah Biblioteca Digital Universidad de Alcalá
Publication Artículo científico (JournalArticle)

3D-LIDAR based object detection and tracking on the edge of IoT for railway level crossing

  • Wisultschew, Cristian
  • Mujica, Gabriel
  • Lanza Gutiérrez, José Manuel|||0000-0002-1083-5015
  • Portilla, Jorge
Object detection is an essential technology for surveillance systems, particularly in areas with a high risk of accidents such as railway level crossings. To prevent future collisions, the system must detect and track any object that passes through the monitored area with high accuracy, and this process must be performed fulfilling real-time specifications. In this work, an edge IoT HW platform implementation capable of detecting and tracking objects in a railway level crossing scenario is proposed. The response of the system has to be calculated and sent from the proposed IoT platform to the train, so as to trigger a warning action to avoid a possible collision. The system uses a low-resolution 3D 16-channel LIDAR as a sensor that provides an accurate point cloud map with a large amount of data. The element used to process the information is a custom embedded edge platform with low computing resources and low-power consumption. This processing element is located as close as possible to the sensor, where data is generated to improve latency, privacy, and avoid bandwidth limitations, compared to performing processing in the cloud. Additionally, lightweight object detection and tracking algorithm is proposed in this work to process a large amount of information provided by the LIDAR, allowing to reach real-time specifications. The proposed method is validated quantitatively by carrying out implementation on a car road, emulating a railway level crossing., European Commission