Skip to main content

Resultados relacionados

Resultados totales (Incluyendo duplicados): 4
Encontrada(s) 1 página(s)

DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Meta-analysis of CO2 conversion, energy efficiency, and other performance data of plasma-catalysis reactors with the open access PIONEER database

  • Salden, Antoine
  • Budde, Maik
  • García Soto, Carolina A.
  • Biondo, Omar
  • Barauna, Jairo
  • Faedda, Marzia
  • Musig, Beatrice
  • Fromentin, Chloé
  • Nguyen-Quang, Minh
  • Philpott, Harry
  • Hasrack, Golshid
  • Aceto, Domenico
  • Cai, Yuxiang
  • Azzolina Jury, Federico
  • Bogaerts, Annemie
  • Costa, Patrick da
  • Engeln, Richard
  • Gálvez Parruca, María Elena
  • Gans, Timo
  • García Martínez, Tomás
  • Guerra, Vasco
  • Henriques, Carlos
  • Motak, Monika
  • Navarro López, María Victoria
  • Parvulescu, Vasile I.
  • Van Rooij, Gerard
  • Samojeden, Bogdan
  • Sobota, Ana
  • Tosi, Paolo
  • Tu, Xin
  • Guaitella, Olivier
16 figures, 4 tables., This paper brings the comparison of performances of CO2 conversion by plasma and plasma-assisted catalysis based on the data collected from literature in this field, organised in an open access online database. This tool is open to all users to carry out their own analyses, but also to contributors who wish to add their data to the database in order to improve the relevance of the comparisons made, and ultimately to improve the efficiency of CO2 conversion by plasma-catalysis. The creation of this database and database user interface is motivated by the fact that plasma-catalysis is a fast-growing field for all CO2 conversion processes, be it methanation, dry reforming of methane, methanolisation, or others. As a result of this rapid increase, there is a need for a set of standard procedures to rigorously compare performances of different systems. However, this is currently not possible because the fundamental mechanisms of plasma-catalysis are still too poorly understood to define these standard procedures. Fortunately however, the accumulated data within the CO2 plasma-catalysis community has become large enough to warrant so-called “big data” studies more familiar in the fields of medicine and the social sciences. To enable comparisons between multiple data sets and make future research more effective, this work proposes the first database on CO2 conversion performances by plasma-catalysis open to the whole community. This database has been initiated in the framework of a H2020 European project and is called the “PIONEER DataBase”. The database gathers a large amount of CO2 conversion performance data such as conversion rate, energy efficiency, and selectivity for numerous plasma sources coupled with or without a catalyst. Each data set is associated with metadata describing the gas mixture, the plasma source, the nature of the catalyst, and the form of coupling with the plasma. Beyond the database itself, a data extraction tool with direct visualisation features or advanced filtering functionalities has been developed and is available online to the public. The simple and fast visualisation of the state of the art puts new results into context, identifies literal gaps in data, and consequently points towards promising research routes. More advanced data extraction illustrates the impact that the database can have in the understanding of plasma-catalyst coupling. Lessons learned from the review of a large amount of literature during the setup of the database lead to best practice advice to increase comparability between future CO2 plasma-catalytic studies. Finally, the community is strongly encouraged to contribute to the database not only to increase the visibility of their data but also the relevance of the comparisons allowed by this tool., This project has received funding from the European Union’s Horizon 2020 research and innovation programme under the Marie Skłodowska-Curie grant agreement No. 813393. VG was partially funded by the Portuguese FCT-Fundação para a Ciência e a Tecnologia, under projects UIDB/50010/2020, UIDP/50010/2020 and PTDC/FIS- PLA/1616/2021., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Nanostructured CeO2 as support of Ni-catalysts for plasma-catalytic CO2 methanation: Tailoring support’s nanomorphology towards improved performance

  • Musig, Beatrice
  • Roy, Abhijit
  • Arenal, Raúl
  • García Martínez, Tomás
  • Gálvez Parruca, María Elena
  • Navarro López, María Victoria
7 figures, 6 tables.-- Supporting information available.-- © 2023. This manuscript version is made available under the CC-BY-NC-ND 4.0 license https://creativecommons.org/licenses/by-nc-nd/4.0/, Plasma-assisted CO2 methanation has been recently presented as a highly promising route towards the electrification of power-to-gas processes, a key step in our transition to sustainable energy generation. Interesting results have been obtained via the combination of cold plasmas – such as Dielectric Barrier Discharge – and Ni-catalysts prepared using CeO2-containing oxides as support, well known for they ability towards oxygen exchange. In the present work, the physicochemical and dielectric properties of Ni/CeO2 catalysts were tailored through the modification of the nanostructured morphology of pure CeO2, as an alternative to the use of dopants/promoters. Improved efficiency was observed in the presence of CeO2 nanoneedles and nanorods exposing 〈0 1 1〉 facets, more prompt to oxygen exchange. The lower dielectric permittivity of these materials led to a more efficient management of adsorbed species during on-plasma operation, resulting in improved plasma-catalytic behavior., This work received funding from the European Union’s Horizon H2020 research and innovation programme under the Marie Skłodowska-Curie [grant number 813393]. This work was supported by the Departamento de Ciencia, Universidad y Sociedad del Conocimiento of the Gobierno de Aragón [project number LMP151_21]., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Research data Set de datos (Dataset)

Appendix A. Supplementary data for Nanostructured CeO2 as support of Ni-catalysts for plasma-catalytic CO2 methanation: Tailoring support’s nanomorphology towards improved performance [Dataset]

  • Musig, Beatrice
  • Roy, Abhijit
  • Arenal, Raúl
  • García Martínez, Tomás
  • Gálvez Parruca, María Elena
  • Navarro López, María Victoria
The textural features of the CeO2 supports and calcined catalysts were assessed by means of N2 adsorption at -196 °C, performed in an Autosorb 6 device (Quantachrome). X-Ray diffraction patterns (XRD) were acquired in a Bruker D8 Advance series II diffractometer using monochromatic Cu-Kα radiation (λ = 0,1541 nm) operated at 40 kV and 40 mA. Data were collected in the 2θ range from 20° to 90°, using a step size of 0.02° and a step time of 3 s. All the patterns obtained were calibrated against a silicon standard. The identification of crystalline phases and the subsequent Rietveld analysis was performed using the TOPAS software. Raman spectra were acquired in a Horiba Jobin Yvon HR800 UV dispersive laser Raman microscope. X-ray photoelectron spectroscopy (XPS) measurements were used to investigate the surface composition and chemical states of cerium and nickel. They were performed in a ESCA+ (Omicron) photoelectron spectrometer using a non-monochromatic AlKalpha X-ray source (h = 1486.7 eV). A pass energy of 50 eV was used for survey scans and 20 eV for detailed scans. Binding energies were referenced to the Ce3d v’2 (917 eV). The obtained spectra were analyzed using the CasaXPS software. Oxygen Storage Capacity (OSC) measurements of the nanostructured CeO2 supports were performed by thermogravimetric analysis (TGA) in a SETARAM Setsys Evolution device. Inductively coupled plasma atomic emission spectrometry (ICP-AES) was performed on the reduced catalysts using a Xpectroblue-EOP-TI FMT26 (Spectro) spectrophotometer and pre-treating the samples with lithium tetraborate. To assess the reducibility of the materials temperature-programmed reduction in H2 (H2-TPR) measurements were conducted in a BELCAT-M apparatus (BEL Japan Inc.) equipped with a thermal conductivity detector (TCD). Details on the morphology of the CeO2 nanostructured supports, as well as on the Ni-phase distribution on the catalysts prepared, were gained through scanning (SEM) and transition (TEM) electron microscopy analyses. SEM micrographs were acquired using a SEM Hitachi S-3400N microscope with variable pressure couple to an energy-dispersive X-ray spectrometer (X-EDS) Röntec XFlash operated at 10 kV. High-resolution TEM (HRTEM) was performed in a FEI Titan microscope at 300 kV containing spherical-aberration corrector at the objective lens. The high-resolution scanning TEM (HRSTEM), high-angle annular dark-field STEM (HAADF-STEM) images were acquired by a FEI TITAN Low Base TEM at 300 kV containing aberration corrector at the condenser lens and also equipped with X-EDS detector.-- Under a Creative Commons license CC.BY-NC-ND/4.0., 1. Synthesis of the CeO2 supports. 2. Physicochemical characterization techniques and devices. 3. Plasma-catalytic and thermo-catalytic setups & experimental procedures. 4. SEM and TEM characterization: 4.1. CeO2 supports. 4.2. Reduced Ni-catalysts. 4.3. Spent Ni-catalysts (used in plasma-catalytic methanation). 5. X-ray diffraction. 6. N2-adsorption isotherms. 7. X-ray photoelectron spectrometry. 8. Raman spectroscopy. 9. 10 h time-on-stream methanation experiments, This work received funding from the European Union’s Horizon H2020 research and innovation programme under the Marie Skłodowska-Curie [grant number 813393]. This work was supported by the Departamento de Ciencia, Universidad y Sociedad del Conocimiento of the Gobierno de Aragón [project number LMP151_21]., Peer reviewed
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Nanostructured CeO2 as support of Ni-catalysts for plasma-catalytic CO2 methanation: Tailoring support’s nanomorphology towards improved performance

  • Musig, Beatrice
  • Roy, Abhijit
  • Arenal, Raúl
  • García, Tomás
  • Gálvez, María Elena
  • Navarro, María Victoria
Plasma-assisted CO2 methanation has been recently presented as a highly promising route towards the electrification of power-to-gas processes, a key step in our transition to sustainable energy generation. Interesting results have been obtained via the combination of cold plasmas – such as Dielectric Barrier Discharge – and Ni-catalysts prepared using CeO2-containing oxides as support, well known for they ability towards oxygen exchange. In the present work, the physicochemical and dielectric properties of Ni/CeO2 catalysts were tailored through the modification of the nanostructured morphology of pure CeO2, as an alternative to the use of dopants/promoters. Improved efficiency was observed in the presence of CeO2 nanoneedles and nanorods exposing 〈0 1 1〉 facets, more prompt to oxygen exchange. The lower dielectric permittivity of these materials led to a more efficient management of adsorbed species during on-plasma operation, resulting in improved plasma-catalytic behavior.