Skip to main content

Resultados relacionados

Resultados totales (Incluyendo duplicados): 16
Encontrada(s) 1 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Strategies for the deployment of microclimate sensors in spaces housing collections

  • Frasca, Francesca
  • Verticchio, Elena
  • Grinde, Andreas
  • Bile, Alessandro
  • Chimenti, Claudio
  • Conati Barbaro, Celia
  • Favero, Gabriele
  • Fazio, Eugenio
  • Siani, Anna Maria
  • Peiró-Vitoria, Andrea|||0000-0001-6144-8958
  • García Diego, Fernando Juan|||0000-0002-7062-245X
[EN] The study of the microclimate is pivotal for the protection and conservation of cultural heritage. This paper describes specifc procedures aimed at the deployment of microclimate sensors in spaces housing collections (e.g., museums) under diferent scenarios. The decision making involves a multidisciplinary discussion among museum manager, con¿ servator and conservation scientist and implies fve steps. Since the sensor¿s deployment depends on the number of available sensors, we have identifed two possible circumstances: (a) artwork-related deployment (i.e., there are as many sensors as the number of artworks) and (b) artwork-envelope-related deployment (i.e., the number of available sensors is less than the number of artworks). The former circumstance is advisable when the artwork is often moved from a museum to another one. The latter circumstance is usually the case of permanent collections, and, according to the Museum Scenario (MS), the related procedures can be further subdivided into basic (MSI and MSII) and advanced (MSIII and MSIV). Advanced procedures are preferable over basic procedures when several time series of microcli¿ mate data have been collected for at least one calendar year in several sampling points. All these procedures make it possible to design where to deploy sensors both in the case of an initial deployment and of optimisation of already installed sensors., This research was funded by the European Union's Horizon 2020 research and innovation program under grant agreement No.814624.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

A Methodology for the Multi-Point Characterization of Short-Term Temperature Fluctuations in Complex Microclimates Based on the European Standard EN 15757:2010: Application to the Archaeological Museum of L&apos, Almoina (Valencia, Spain)

  • Díaz-Arellano, Ignacio
  • Zarzo Castelló, Manuel|||0000-0002-8361-0554
  • García Diego, Fernando Juan|||0000-0002-7062-245X
  • Perles, Angel|||0000-0002-5782-4284
[EN] The monitoring and control of thermo-hygrometric indoor conditions is necessary for an adequate preservation of cultural heritage. The European standard EN 15757:2010 specifies a procedure for determining if seasonal patterns of relative humidity (RH) and temperature are adequate for the long-term preservation of hygroscopic materials on display at museums, archives, libraries or heritage buildings. This procedure is based on the characterization of the seasonal patterns and the calculation of certain control limits, so that it is possible to assess whether certain changes in the microclimate can be harmful for the preventive conservation of artworks, which would lead to the implementation of corrective actions. In order to discuss the application of this standard, 27 autonomous data-loggers were located in different points at the Archaeological Museum of l¿Almoina (Valencia). The HVAC system (heating, ventilation and air conditioning) at the museum tries to reach certain homogeneous environment, which becomes a challenge because parts of the ruins are covered by a skylight that produces a greenhouse effect in summer, resulting in severe thermo-hygrometric gradients. Based on the analysis of temperatures recorded during 16 months, the air conditions in this museum are discussed according to the standard EN 15757:2010, and some corrective measures are proposed to improve the conservation conditions. Although this standard is basically intended for data recorded from a single sensor, an alternative approach proposed in this work is to find zones inside the museum with a homogeneous microclimate and to discuss next the average values collected in each area. A methodology is presented to optimize the application of this standard in places with a complex microclimate like this case, when multiple sensors are located at different positions., This research was funded by the European Unions Horizon 2020 research and innovation program under grant agreement No. 814624.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

A statistical approach for a-posteriori deployment of microclimate sensors in museums: a case study

  • Frasca, Francesca
  • Verticchio, Elena
  • Merello, Paloma
  • Grinde, Andreas
  • Fazio, Eugenio
  • Siani, Anna Maria
  • Zarzo Castelló, Manuel|||0000-0002-8361-0554
  • García Diego, Fernando Juan|||0000-0002-7062-245X
[EN] The deployment of sensors is the first issue encountered when microclimate monitoring is planned in spaces devoted to the conservation of artworks. Sometimes, the first decision regarding the position of sensors may not be suitable for characterising the microclimate close to climate sensitive artworks or should be revised in light of new circumstances. This paper fits into this context by proposing a rational approach for a posteriori deployment of microclimate sensors in museums where long-term temperature and relative humidity observations were available (here, the Rosenborg Castle, Copenhagen, Denmark). Different statistical tools such as box-and-whisker plots, principal component analysis (PCA) and cluster analysis (CA) were used to identify microclimate patterns, i.e., similarities of indoor air conditions among rooms. Box-and-whisker plots allowed us to clearly identify one microclimate pattern in two adjoining rooms located in the basement. Multivariate methods (PCA and CA) enabled us to identify further microclimate patterns by grouping not only adjoining rooms but also rooms located on different floors. Based on these outcomes, new configurations about the deployment of sensors were proposed aimed at avoiding redundant sensors and collecting microclimate observations in other sensitive locations of this museum., This research was funded by the CollectionCare project, which has received funding from the European Union's Horizon 2020 research and innovation programme under grant agreement No. 814624 (https://www.collectioncare.eu/(accessed on 1 April 2022)). No other external funding was received for this study.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Reconstruction of historical hygrometric time series for the application of the European standard EN 15757:2010 and its comparison with current time series

  • Díaz-Arellano, Ignacio
  • Aransay, Cristina
  • Gonzalez de Aspuru, Sara
  • Laborda Macario, Jaime
  • Zarzo Castelló, Manuel|||0000-0002-8361-0554
  • Perles, Angel|||0000-0002-5782-4284
[EN] The quality and quantity of thermo-hygrometric data are essential to carry out an appropriate assessment of the microclimate from a preventive conservation standpoint in those spaces where the artefacts to be preserved are located. These analyses are fundamental for long-term preventive conservation plan to assess chemical, biological or fracture risks. However, many small and medium-sized museums as well as heritage buildings have only a limited amount of historical data, with various problems that hinder the evaluation of microclimatic conditions. Two of the most common problems are short monitoring time periods, usually less than one year, and low sampling rates of measurements. In many of these situations, guidelines such as the European standard EN 15757:2010 cannot be applied because they require a monitoring period of at least 13 months and a minimum sampling frequency of one measurement per hour. In addition to these issues, there are other drawbacks such as missing values or lack of regularity in data collection. This paper proposes a procedure for the reconstruction of historical thermo-hygrometric data using multivariate statistical methods. The methodology allows the arrangement of long historical series of sufficient quality, enabling museums to restore their datasets for further analysis regarding the application of guidelines for preventive conservation. The methodology has been validated on the basis of real data. The application of the European standard EN 15757:2010 is presented as a practical example of the procedure using historical data collected at a partner museum of the H2020 CollectionCare project, together with data currently being collected for some months by a set of wireless sensor nodes., his research was funded by the European Union's Horizon 2020 research and innovation program under Grant agreement No. 814624
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Statistical Analysis of Ultraviolet Radiation in the Museum of L&apos, Almoina in Valencia (Spain)

  • Moreno, J.C.|||0000-0002-7696-9745
  • Baró Zarzo, José Luis|||0000-0001-9529-7289
  • Serrano, María-Antonia|||0000-0002-1508-6893
  • García Diego, Fernando Juan|||0000-0002-7062-245X
[EN] The present work is an analysis and statistical association of distributions of experimental values of ultraviolet radiation attenuation through the skylight of a museum in the city of Valencia (Spain). The distributions of values were made in summer and winter at different times. Statistical analysis was obtained to detect the clustering of the measurement distributions, and the statistical association was carried out using the Q or Yule index, which means a dependency function between this parameter and the structure of the museum building. The basis of the aforementioned statistical index is a contingency matrix whose elements are subject to change depending on the season of the year and the shape of the skylight., This research was funded by the European Union s Horizon 2020 research and innovation program under grant agreement No. 814624.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Statistical Analysis of Visible and Infrared Radiation in the Museum of L&apos, Almoina in Valencia (Spain)

  • Moreno, J.C.|||0000-0002-7696-9745
  • Baró Zarzo, José Luis|||0000-0001-9529-7289
  • Serrano, María-Antonia|||0000-0002-1508-6893
  • García Diego, Fernando Juan|||0000-0002-7062-245X
[EN] The present work is an analysis and statistical association of distributions of experimental spectral values of visible and infrared radiation attenuation through the skylight of a museum in the city of Valencia (Spain). They have been statistically analyzed in summer and winter. This analysis allows detecting interrelation between data distributions. The spatial association of these distributions is also analyzed by applying the Yule index belonging to Spatial Statistics. The interest of the index is to establish a relationship of spatial association of distributions and the structure of the museum. That is, a contingency matrix is constructed whose value of the elements depends on the shape of the museum's skylight., This research was funded by the European Union s Horizon 2020 research and innovation program under grant agreement No. 814624.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Numerical modelling of mechanical degradation of canvas paintings under desiccation

  • Lee, D.S.-H.
  • Kim, N.-S.
  • Scharff, M.
  • Nielsen, A.V.
  • Mecklenburg, M.
  • Bratasz, L.
  • Andersen, C. K.
  • Fuster-López, Laura|||0000-0001-7072-7190
[EN] Mechanical damage in oil paintings on canvas show up as cracks and loss of original paint. Several parameters can contribute to this type of degradation. These paintings have a complex layered structure, typically composed of minimum four or more hygroscopic materials, each of which has different (non-linear) material properties and geometrical complexities. The mechanical degradation of canvas paintings occurs because each of these materials have diverse responses under fluctuating environmental conditions, especially temperature and relative humidity (RH). By examining the geometrical complexities and the non-linear material properties, this paper presents an investigation of three degradation phenomena under desiccation: (1) bulging formation around the corners, (2) crack formation in glue and ground layers, and (3) plastic deformation in the ground and oil paint layers. This on-going investigation provides further insights into the global and local stress distribution in typically constructed oil canvas paintings. This includes finite element method (FEM) and extended-FEM (XFEM) computer models at various scales, under desiccation from the initial RH of 90%, and 50¿10%. The models consist of four to five different materials, namely lead white oil paint, red iron oxide oil paint, rabbit skin glue, linen canvas, and a spruce stretcher. The models were constructed using several combinations of materials to conduct parametric studies on the effects of glue shrinkage in paintings due to desiccation, and changing the mechanical properties of the ground layers. The relevant geometrical and mechanical properties with respect to the stress relaxation conditions are discussed in detail. The simulation results of the full-scale models show that the shrinkage of glue lowers the level of induced tension stresses in the paint layers in the central area of the painting due to the inward bowing of the stretcher. The inward deformation of the stretcher can be 4.5 times as large in a painting with a glue layer as in one without. This indicates the difficulty in forming cracks near the center of paintings purely by desiccation; however, in close-up cross-section model, cracks of 20 ¿m in length could still be observed in the ground exposed to an extreme RH change of 90% to 10%. The analysis of cross-section models with the full geometrical complexity for the corners showed that multiple cracks are likely to form in ground and paint layers in the corners when desiccated by 40%; RH 50¿10%. Furthermore, in extreme cases with stiffer ground/paint such as zinc white, cracks can form from smaller drop in RH; RH 50% to 35%. Such cracks are form in the ground layers, and therefore, are not initially visible as they are positioned below the uncracked paint layer. This result can be the possible explanation for cracks in the ground, which are initially invisible with the naked eye, but can be revealed with X-radiographs. The results support the hypothesis that fluctuations in relative humidity can cause hidden cracks in the lower layers, which can eventually propagate further into the upper-lying paint layers of paintings. The cracks typically form when the desiccation reaches a 40% drop, but in cases of brittle materials the drop causing cracks can be lower. The actual RH drop causing cracks depends on the specific material composition., This research was funded by the European Union's Horizon 2020 research and innovation program under grant agreement No. 814624. Lukasz Bratasz's work was financed by also the Polish National Agency for Academic Exchange, project Polish Returns [grant PPN/PPO/2018/1/00004/U/00001].
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Investigation on the Use of Passive Microclimate Frames in View of the Climate Change Scenario

  • Verticchio, Elena
  • Frasca, Francesca
  • Siani, Anna Maria
  • García Diego, Fernando Juan|||0000-0002-7062-245X
[EN] Passive microclimate frames are exhibition enclosures able to modify their internal climate in order to comply with paintings¿ conservation needs. Due to a growing concern about the effects of climate change, future policies in conservation must move towards affordable and sustainable preservation strategies. This study investigated the hygrothermal conditions monitored within a microclimate frame hosting a portrait on cardboard with the aim of discussing its use in view of the climate expected indoors in the period 2041¿2070. Its effectiveness in terms of the ASHRAE classification and of the Lifetime Multiplier for chemical deterioration of paper was assessed comparing temperature and relative humidity values simultaneously measured inside the microclimate frame and in its surrounding environment, first in the Pio V Museum and later in a residential building, both located in the area of Valencia (Spain). Moreover, heat and moisture transfer functions were used to derive projections over the future indoor hygrothermal conditions in response to the ENSEMBLES-A1B outdoor scenario. The adoption of microclimate frames proved to be an effective preventive conservation action in current and future conditions but it may not be sufficient to fully avoid the chemical degradation risk without an additional control over temperature, This project received funding from the European Union's Horizon 2020 research and innovation programme under grant agreement No. 814624. This research was partially supported by the Plan Nacionalde I+D, Comision Interministerial de Ciencia y Tecnologia (FEDER-CICYT) under project HAR2013-47895-C2-1-P.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Shrinkage and mechanical properties of drying oil paints

  • Janas, Arkadiusz
  • Mecklenburg, Marion
  • Kozlowski, Roman
  • Kékicheff, Patrick
  • Favier, Damien
  • Andersen, Cecil Krarup
  • Scharff, Mikkel
  • Bratasz, Lukasz
  • Fuster-López, Laura|||0000-0001-7072-7190
[EN] Understanding how the evolving molecular composition of an oil paint layer on its transition to an aged solid film affects its dimensional change and mechanical properties is fundamental to the assessment of material durability and more broadly risk of degradation of oil paintings. Tensile properties-modulus of elasticity and strain at break-as well as cumulative shrinkage were determined for a selection of oil paints from Mecklenburg¿s Paint Reference Collection now after approximately 30 years of drying. The oil paints were found to get stiffer and more brittle with diminishing plastic deformation and increasingly elastic behaviour. For some paints, the increases in stiffness and decreases in the strain at break were dramatic during the late stage of drying. The observations modify the current physical model of paintings in which the mismatch in the response of glue-based ground layer and unrestrained wood or canvas support to variations in relative humidity (RH) has been identified as the worst-case condition for the fracturing of the entire pictorial layer. This study demonstrated that some paints were more brittle than the glue-based ground layer and as a consequence more vulnerable to cracking. The shrinkage of paints due to molecular relocation and/or evaporation of organic medium as they dry and age was measured. This shrinkage can exceed their strain at break and lead to fracturing of the oil paint layer if it is restrained by a dimensionally stable substrate. Consequently, after long-term drying, the cumulative shrinkage can cause oil paints to crack even in absence of fluctuations in RH or temperature. An example of cracking developed in an oil paint layer on the top of an undamaged ground layer in a historic panel painting was made evident by the X-ray microtomography., This work was funded by the European Union's Horizon 2020 research and innovation program under grant agreement No. 814624 and the statutory research fund of the Jerzy Haber Institute of Catalysis and Surface Chemistry Polish Academy of Sciences. Lukasz Bratasz's work was financed by the Polish National Agency for Academic Exchange, project Polish Returns [Grant PPN/PPO/2018/1/00004/U/00001].
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

A methodology for discriminant time series analysis applied to microclimate monitoring of fresco paintings

  • Ramírez, Sandra
  • Zarzo Castelló, Manuel|||0000-0002-8361-0554
  • Perles, Angel|||0000-0002-5782-4284
  • García Diego, Fernando Juan|||0000-0002-7062-245X
[EN] The famous Renaissance frescoes in Valencia¿s Cathedral (Spain) have been kept under confined temperature and relative humidity (RH) conditions for about 300 years, until the removal of the baroque vault covering them, carried out in 2006. In the interest of longer-term preservation and in order to maintain these frescoes in good condition, a unique monitoring system was implemented to record both air temperature and RH. Sensors were installed in different points at the vault of the apse, during the restoration process. The present study proposes a statistical methodology for analyzing a subset of RH data recorded in 2008 and 2010, from the sensors. This methodology is based on fitting different functions and models to the time series, in order to classify the sensors. The methodology proposed, computes classification variables and applies a discriminant technique to them. The classification variables correspond to estimates of parameters of the models and features such as mean and maximum, among others. These features are computed using values of the functions such as spectral density, sample autocorrelation (sample ACF), sample partial autocorrelation (sample PACF), and moving range (MR). The classification variables computed were structured as a matrix. Next, Sparse Partial Least Squares Discriminant Analysis (sPLS-DA) was applied in order to discriminate sensors according to their position in the vault. It was found that the classification of sensors derived from Seasonal ARIMA-TGARCH showed the best performance (i.e., lowest classification error rate). Based on these results, the methodology applied here can be useful for characterizing the differences in RH, measured at different positions in a historical building., This project received funding from the European Union's Horizon 2020 research and innovation programme under grant agreement No. 814624. Furthermore, the project was partially supported by Instituto Colombiano de Credito Educativo y Estudios Tecnicos en el Exterior (ICETEX) by means of Programa credito Pasaporte a la Ciencia ID 3595089, and also by Pontificia Universidad Javeriana Cali (Nit 860013720-1) through the Convenio de Capacitacion para Docentes O. J. 086/17.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Multivariate time series analysis of temperatures in the archaeological museum of L&apos, Almoina (Valencia, Spain)

  • Ramírez, Sandra
  • Zarzo Castelló, Manuel|||0000-0002-8361-0554
  • García Diego, Fernando Juan|||0000-0002-7062-245X
[EN] An earlier study carried out in 2010 at the archaeological site of L'Almoina (Valencia, Spain) found marked daily fluctuations of temperature, especially in summer. Such pronounced gradient is due to the design of the museum, which includes a skylight as a ceiling, covering part of the remains in the museum. In this study, it was found that the thermal conditions are not homogeneous and vary at different points of the museum and along the year. According to the European Standard EN10829, it is necessary to define a plan for long-term monitoring, elaboration and study of the microclimatic data, in order to preserve the artifacts. With the aforementioned goal of extending the study and offering a tool to monitor the microclimate, a new statistical methodology is proposed. For this propose, during one year (October 2019-October 2020), a set of 27 data-loggers was installed, aimed at recording the temperature inside the museum. By applying principal component analysis and k-means, three different microclimates were established. In order to characterize the differences among the three zones, two statistical techniques were put forward. Firstly, Sparse Partial Least Squares Discriminant Analysis (sPLS-DA) was applied to a set of 671 variables extracted from the time series. The second approach consisted of using a random forest algorithm, based on the same functions and variables employed by the first methodology. Both approaches allowed the identification of the main variables that best explain the differences between zones. According to the results, it is possible to establish a representative subset of sensors recommended for the long-term monitoring of temperatures at the museum. The statistical approach proposed here is very effective for discriminant time series analysis and for explaining the differences in microclimate when a net of sensors is installed in historical buildings or museums., The authors are grateful to Angel Perles for his support in this research. In addition, the authors would like to thank the Museum of L'Almoina, managed by the local government of Valencia (Spain) and his director Vicent Escriva. Thanks are also given to Esther Nebot Diaz from the "Department of Conservation and Restoration of Cultural Heritage" of the Polytechnic University of Valencia (UPV) for her help in the calibration of sensors. S.R. wants to thank the grant received from Instituto Colombiano de Credito Educativo y Estudios Tecnicos en el Exterior (ICETEX) by means of Programa credito Pasaporte a la Ciencia ID 3595089, as well as by Pontificia Universidad Javeriana Cali (Nit 860013720-1) through the Convenio de Capacitacion para Docentes O. J. 086/17.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

The CHEWMA chart: A new statistical control approach for microclimate monitoring in preventive conservation of cultural heritage

  • Díaz-Arellano, Ignacio
  • Zarzo Castelló, Manuel|||0000-0002-8361-0554
[EN] A new statistical control chart denoted as CHEWMA (Cultural Heritage EWMA) is proposed for microclimate monitoring in preventive conservation. This tool is a real-time detection method inspired by the EN 15757:2010 standard, serving as an alternative to its common adaptations. The proposed control chart is intended to detect short-term fluctuations (STFs) in temperature (T) and relative humidity (RH), which would enable timely interventions to mitigate the risk of mechanical damage to collections. The CHEWMA chart integrates the Exponentially Weighted Moving Average (EWMA) control chart with a weighting mechanism that prioritizes fluctuations occurring near extreme values. The methodology was validated using RH time series recorded by seven dataloggers installed at the Alava Fine Arts Museum, and, from these, seventy simulated time series were generated to enhance the robustness of the analyses. Sensitivity analyses demonstrated that, for the studied dataset, the CHEWMA chart exhibits stronger similarity to the application of EN 15757:2010 than other commonly used real-time STF detection methods in the literature. Furthermore, it provides a flexible option for real-time applications, enabling adaptation to specific conservation needs while remaining aligned with the general framework established by the standard. To the best of our knowledge, this is the first statistical process control chart designed for the field of preventive conservation of cultural heritage. Beyond assessing CHEWMA¿s performance, this study reveals that, when adapting the procedures of the European norm by developing a new real-time approach based on a simple moving average (herein termed SMA-FT), a window of approximately 14 days is more appropriate for STF detection than the commonly assumed 30-day period in the literature.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

From concept to validation of a wireless environmental sensor for the integral application of preventive conservation methodologies in low-budget museums

  • Laborda, Jaime
  • García-Castillo, Ana María
  • Mercado Romero, Ricardo|||0000-0003-3316-0097
  • Peiró-Vitoria, Andrea|||0000-0001-6144-8958
  • Perles, Angel|||0000-0002-5782-4284
[EN] The effective implementation of preventive conservation strategies requires tools to continuously measure the environmental conditions to which the cultural objects are exposed. In this sense, the European Horizon 2020 project CollectionCare aims to provide an affordable preventive conservation service for individual objects focused to small museums with limited budgets. Although the use of data loggers has been a must in the past, new deployments tend to use wired and wireless sensors that provide real-time information and the ability to instantly analyse the data, allowing immediate action to be taken in the event of a threat towards a cultural object. For already constructed buildings, wireless systems have the advantage that, a priori, deployments are simpler, faster and cheaper, but have to deal with complex heritage environments with long distances to be covered and very thick walls to cross. In many cases, commercial systems of this type are not economically viable for small museums with limited budgets. Moreover, conservators who try to approach such solutions are often overwhelmed by unclear technical specifications that do not allow them to determine whether the solution fits their environment or not, giving rise to great frustration. Among others, the CollectionCare includes the design of a specific low-cost wireless sensor, being the aim of this article to present to both technical and non-technical readers, the design choices made regarding the housing, attachment method, power source, wireless transmission technique and selection of the environmental sensors following European standards. Also, the effective implementation of the device in three stages to prove the concep until to get a near-production version is presented. The developed device has been deployed in museums in Belgium, Italy, Greece, Latvia, Denmark and Spain, and the validation results are presented, showing that it is feasible to have a cost-effective proposal that it is easy to install and configure and can operate for 10 years without the need for maintenance or battery replacement except if it is needed to comply with annual recalibration if standards such as ISO 11799:2015 are required., This research was funded by the European Union's Horizon 2020 research and innovation programme under Grant agreement No.814624.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Mechanical properties and moisture-related dimensional change of canvas paintings¿canvas and glue sizing.

  • Janas, Arkadiusz
  • Andersen, Cecil Krarup
  • Kozlowski, Roman
  • Poznanska, Katarzyna
  • Gajda, Aleksandra
  • Scharff, Mikkel
  • Bratasz, Lukasz
  • Fuster-López, Laura|||0000-0001-7072-7190
  • Vicente-Escuder, Ángel|||0000-0001-8425-3424
[EN] Understanding canvas paintings as physical systems is fundamental to develop evidence-based environmental specifications for museums. A number of tests were carried out to determine mechanical properties of canvas, canvas sized with animal glue and animal glue-based ground layer (gesso) as a function of relative humidity (RH). The mechanical properties of the canvas samples tested exhibited an anisotropy dependent on the measurement direction, being the stiffness corresponding to the weft direction greater than the warp and diagonal ones. Sizing the canvas with a layer of animal glue significantly increased its modulus of elasticity while the anisotropy of mechanical properties was kept in the composite material. The application of an animal glue-based ground layer on sized canvas increased the elasticity modulus of the system by another order of magnitude (similar to 2 GPa) whereas the anisotropy of the material disappeared. The measurements were carried out in a wide range of RH from 30 to 90%. An increase in RH caused a decrease in the material stiffness. Cracking of the gesso layer, which is often responsible for the formation of cracks in paintings, was observed at strains of the order of a few thousandths. Swelling of glue sizing dominated the moisture-induced swelling of the composite material in the less stiff warp direction, completely overriding the shrinkage of the untreated canvas. In contrast, the swelling of the composite material in the stiffer weft direction was much smaller than for pure glue alone, being clearly affected by the textile., This work was funded by the European Union's Horizon 2020 research and innovation program under grant agreement No. 814624 and the statutory research fund of the Jerzy Haber Institute of Catalysis and Surface Chemistry Polish Academy of Sciences. Lukasz Bratasz's work was financed by the Polish National Agency for Academic Exchange, project Polish Returns [Grant PPN/PPO/2018/1/00004/U/00001]
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Multivariate characterization of temperature fluctuations in a historical building using energy-efficient IoT wireless sensors

  • Zarzo Castelló, Manuel|||0000-0002-8361-0554
  • Perles, Angel|||0000-0002-5782-4284
  • Mercado Romero, Ricardo|||0000-0003-3316-0097
  • García Diego, Fernando Juan|||0000-0002-7062-245X
[EN] Adequate thermic conditions are required for the preventive conservation of artworks, but such optimum conditions cannot always be achieved in historical buildings such as ancient churches. In those cases, it is of interest to assess the potential risk of punctual changes in indoor environments that can be harmful to artworks. These conditions can be assessed by means of a microclimate monitoring system comprised of a set of energy¿efficient wireless sensors connected to the cloud using IoT techniques. This approach was followed at the baroque church of Saint Thomas and Saint Philip Neri in Valencia (Spain). A set of 26 wireless nodes was installed, which recorded values of temperature and relative humidity every hour for a period of 7 months. Small differences of temperature were obtained among sensors, so that an efficient methodology based on principal component analysis (PCA) was applied for the characterization of similarities and dissimilarities between sensors. Daily ranges of temperatures were studied as well as mean trajectories, differences between days of the week, and changes in the correlation structure of daily median values over time. Results provide a framework for an efficient characterization of temperatures in heritage buildings based on a network of wireless sensors. Such a framework is useful to assess the potential risk of temperature fluctuations on the preventive conservation of historical buildings and artworks., Funding This research was funded by the European Unions Horizon 2020 research and innovation program under grant agreement No. 814624.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Characterization of temperature gradients according to height in a baroque church by means of wireless sensors

  • Ramírez, Sandra
  • Zarzo Castelló, Manuel|||0000-0002-8361-0554
  • Perles, Angel|||0000-0002-5782-4284
  • García Diego, Fernando Juan|||0000-0002-7062-245X
[EN] The baroque church of Saint Thomas and Saint Philip Neri (Valencia, Spain), which was built between 1727 and 1736, contains valuable paintings by renowned Spanish artists. Due to the considerable height of the central nave, the church can experience vertical temperature gradients. In order to investigate this issue, temperatures were recorded between August 2017 and February 2018 from a wireless monitoring system composed of 21 sensor nodes, which were located at different heights in the church from 2 to 13 m from the floor level. For characterizing the temperature at high, medium and low altitude heights, a novel methodology is proposed based on sparse Partial Least Squares regression (sPLS), Linear Discriminant Analysis (LDA), and the Holt-Winters method, among others, which were applied to a time series of temperature. This approach is helpful to discriminate temperature profiles according to sensor height. Once the vertical thermal gradients for each month were characterized, it was found that temperature reached the maximum correlation with sensor height in the period between August 10th and September 9th. Furthermore, the most important features from the time series that explain this correlation are the mean temperature and the mean of moving range. In the period mentioned, the vertical thermal gradient was estimated to be about 0.043 ºC/m, which implies a difference of 0.47 ºC on average between sensor nodes at 2 m from the floor with respect to the upper ones located at 13 m from the floor level. The gradient was estimated as the slope from a linear regression model using height and hourly mean temperature as the predictor and response, respectively. This gradient is consistent with similar reported studies. The fact that such gradient was only found in one month suggests that the mechanisms of dust deposition on walls involved in vertical thermal gradients are not important in this case regarding the preventive conservation of artworks. Furthermore, the methodology proposed here was useful to discriminate the time series at high, medium and low altitude levels. This approach can be useful when a set of sensors is installed for microclimate monitoring in churches, cathedrals, and other historical buildings, at different levels and positions., This project received funding from the European Union's Horizon 2020 research and innovation program under grant agreement No. 814624.