Skip to main content

Resultados relacionados

Resultados totales (Incluyendo duplicados): 6
Encontrada(s) 1 página(s)

DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Poly(vinyl benzoate)-b-poly(diallyldimethyl ammonium TFSI)-b-poly(vinyl benzoate) triblock copolymer electrolytes for sodium batteries

  • Stigliano, Pierre L.
  • Gallastegui, Antonela
  • Villacis Segovia, Carlos
  • Amores, Marco
  • Kumar, Ajit
  • O'Dell, Luke A.
  • Fang, Jian
  • Mecerreyes, David
  • Pozo Gonzalo, Cristina
  • Forsyth, Maria
6 figures.-- Supplementary information available., Block copolymers (BCPs) as solid electrolytes for batteries are usually designed to have an ion-solvating block for ion conduction and an ionophobic block for providing mechanical strength. Here, we show a novel solid polymer electrolyte (SPE) for sodium batteries based on a poly(vinyl benzoate)-b-poly(diallyldimethyl ammonium bis(trifluoromethanesulfonyl)imide) PVBx-b-PDADMATFSIy-b-PVBx ABA triblock copolymer. The SPE triblock copolymer comprises a polymerized ionic liquid (PIL) ion-solvating block combined with NaFSI salt as an internal block and an ionophilic PVB as an external block. Four distinct compositions with varying chain lengths of the blocks were synthesized by reversible addition−fragmentation chain-transfer (RAFT) polymerization. The neat copolymers were subsequently mixed with NaFSI in a 2:1 mol ratio of Na to ionic monomer units. Through comprehensive analysis using differential scanning calorimetry (DSC), Fourier-transform infrared spectroscopy (FTIR), and nuclear magnetic resonance (NMR), it was revealed that the ion coordination within the polymer–salt mixtures undergoes changes based on the composition of the starting neat polymer. Electrochemical evaluations identified the optimal composition for practical application as PVB11.5K-b-PDADMATFSI33K-b-PVB11.5K, showing an ionic conductivity at 70 °C of 4.2 × 10−5 S cm−1. This polymer electrolyte formulation was investigated for sodium in Na|Na symmetrical cells, showing an overpotential of 200 mV at 70 °C at 0.1 mA cm−2. When applied in a sodium–air battery, the polymer electrolyte membrane achieved a discharge capacity of 1.59 mAh cm−2 at 50 °C., This project received funding from the European Union’s Horizon 2020 research and innovation program under the Marie Skłodowska-Curie grant agreement No. 860403. The authors acknowledge the Australian Research Council (ARC) for funding through Discovery Programme DP160101178 and the ARC Industry Transformation Training Centre for Future Energy Technologies (storEnergy) for funding under grant agreement No. IC180100049., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Gel polymer electrolytes based on sulfonamide functional polymer nanoparticles for sodium metal batteries

  • Stigliano, Pierre L.
  • Gallastegui, Antonela
  • Smith, Thomas H.
  • O'Dell, Luke A.
  • Mecerreyes, David
  • Pozo Gonzalo, Cristina
  • Forsyth, Maria
8 figures., In this work, we investigate the development of polymer electrolytes for sodium batteries based on sulfonamide functional polymer nanoparticles (NaNPs). The synthesis of the polymer NaNPs is carried out by emulsion copolymerization of methyl methacrylate and sodium sulfonamide methacrylate in the presence of a crosslinker, resulting in particle sizes of 50 nm, as shown by electron microscopy. Then, gel polymer electrolytes are prepared by mixing polymer NPs and different organic plasticizers including carbonates, glymes, sulfolanes and ionic liquids. The chemical nature of the plasticizer resulted in different effects on the sodium coordination shell, which in turn impacted the properties of each membrane as investigated by FTIR. The transport properties were investigated by EIS and solid-state NMR. Among the organic gel polymer electrolytes (GPEs), the system comprising NaNPs and sulfolanes achieved the best ionic conductivity (1.1 × 10−4 S cm−1 at 50 °C) and sodium single-ion properties while for the ionogels, the best ionic conductivity was obtained by NaNPs mixed with pyrrolidinium-FSI IL (4.7 × 10−4 S cm−1 at 50 °C). From sodium metal symmetrical cell cycling, the use of ILs as plasticizers proved to be more beneficial for SEI formation and its evolution during cell cycling compared to the systems based on NPs and organic solvents. However, NPs + PC led to lower cell overvoltage than NPs + ILs (<0.4 V vs. >0.5 V). This study shows the potential of using Na-sulfonamide functional polymer nanoparticles to immobilize different plasticizers and thereby obtain soft-solid electrolytes for Na metal batteries., This project has received funding from the European Union's Horizon 2020 research and innovation program under the Marie Skłodowska-Curie grant agreement no. 860403. The authors acknowledge the Australian Research Council (ARC) for funding through Discovery Programme DP160101178 and the ARC Industry Transformation Training Centre for Future Energy Technologies (storEnergy) for funding under grant agreement no. IC180100049., Peer reviewed
Addi. Archivo Digital para la Docencia y la Investigación
Publication Artículo científico (JournalArticle)

Poly(vinyl benzoate)-b-poly(diallyldimethyl ammonium TFSI)-b-poly(vinyl benzoate) Triblock Copolymer Electrolytes for Sodium Batteries

  • Stigliano, Pierre L.
  • Gallastegui, Antonela
  • Villacís Segovia, Carlos
  • Amores, Marco
  • Kumar, Ajit
  • O’Dell, Luke A.
  • Fang, Jian
  • Mecerreyes Molero, David
  • Pozo Gonzalo, Cristina
  • Forsyth, Maria
Block copolymers (BCPs) as solid electrolytes for batteries are usually designed to have an ion-solvating block for ion conduction and an ionophobic block for providing mechanical strength. Here, we show a novel solid polymer electrolyte (SPE) for sodium batteries based on a poly(vinyl benzoate)-b-poly(diallyldimethyl ammonium bis(trifluoromethanesulfonyl)imide) PVBx-b-PDADMATFSIy-b-PVBx ABA triblock copolymer. The SPE triblock copolymer comprises a polymerized ionic liquid (PIL) ion-solvating block combined with NaFSI salt as an internal block and an ionophilic PVB as an external block. Four distinct compositions with varying chain lengths of the blocks were synthesized by reversible addition−fragmentation chain-transfer (RAFT) polymerization. The neat copolymers were subsequently mixed with NaFSI in a 2:1 mol ratio of Na to ionic monomer units. Through comprehensive analysis using differential scanning calorimetry (DSC), Fourier-transform infrared spectroscopy (FTIR), and nuclear magnetic resonance (NMR), it was revealed that the ion coordination within the polymer–salt mixtures undergoes changes based on the composition of the starting neat polymer. Electrochemical evaluations identified the optimal composition for practical application as PVB11.5K-b-PDADMATFSI33K-b-PVB11.5K, showing an ionic conductivity at 70 °C of 4.2 × 10−5 S cm−1. This polymer electrolyte formulation was investigated for sodium in Na|Na symmetrical cells, showing an overpotential of 200 mV at 70 °C at 0.1 mA cm−2. When applied in a sodium–air battery, the polymer electrolyte membrane achieved a discharge capacity of 1.59 mAh cm−2 at 50 °C., This project received funding from the European Union’s Horizon 2020 research and innovation program under the Marie Skłodowska-Curie grant agreement No. 860403. The authors acknowledge the Australian Research Council (ARC) for funding through Discovery Programme DP160101178 and the ARC Industry Transformation Training Centre for Future Energy Technologies (storEnergy) for funding under grant agreement No. IC180100049.
Addi. Archivo Digital para la Docencia y la Investigación
Publication Artículo científico (JournalArticle)

Bio-based Polyhydroxyanthraquinones as High- Voltage Organic Electrode Materials for Batteries

  • Lap, Tijs Tobías
  • Goujon, Nicolas
  • Mantione, Daniele
  • Ruipérez Cillán, Fernando
  • Mecerreyes Molero, David
Unformatted postprint, Organic materials have gained much attention as sustainable electrode materials for batteries. Especially bio-based organic electrode materials (OEMs) are very interesting due to their geographical independency and low environmental impact. However, bio-based OEMs for highvotage batteries remain scarce. Therefore, in this work, a family of bio-based polyhydroxyanthraquinones (PHAQs) - namely 1,2,3,4,5,6,7,8-octahydroxyanthraquinone (OHAQ), 1,2,3,5,6,7-hexahydroxyanthraquinone (HHAQ) and 2,3,6,7-tetrahydroxyanthraquinone (THAQ) - and their redox polymers were synthesized. These PHAQs were synthesized from plantbased precursors and exhibit both a high-potential polyphenolic redox couple (3.5-4.0V vs. Li/Li+) and an anthraquinone redox moiety (2.2-2.8V vs. Li/Li+), while also showing initial charging capacities of up to 381 mAh g-1. To counteract the rapid fading caused by dissolution into the electrolyte, a facile polymerization method was established to synthesize PHAQ polymers. For this, the polymerization of HHAQ served as model reaction where formaldehyde, glyoxal and glutaraldehyde were tested as linkers. The resulting polymers were investigated as cathode materials in lithium metal batteries. PHAQ polymer composites synthesized using formaldehyde as linker and 10 wt.% multi-walled carbon nanotubes (MWCNTs), namely poly(THAQformaldehyde)-10 wt.% MWCNTs and poly(HHAQ-formaldehyde)-10 wt.% MWCNTs, exhibited the best cycling performance in the lithium metal cells, displaying a high-voltage discharge starting at 4.0V (vs. Li/Li+) and retaining 81.6 and 77.3 mAh g-1, respectively after 100 cycles., The authors want to thank the European Union’s Horizon 2020 research and innovation programme under the Marie Skłodowska-Curie grant agreement No. 860403 and No. 101028682, as well as the European Union’s NextGenerationEU/PRTR programme. D.M. thanks Ayuda RYC2021-031668-I financiada por MCIN/AEI/10.13039/501100011033 y por la Unión Europea NextGenerationEU/PRTR.
Addi. Archivo Digital para la Docencia y la Investigación
Publication Artículo científico (JournalArticle)

Organic batteries based on just redox polymers

  • Goujon, Nicolas
  • Casado Pérez, Nerea
  • Patil, Nagaraj
  • Marcilla, Rebeca
  • Mecerreyes Molero, David
[EN]Redox-active polymers have gained interest as environmentally friendly alternative to inorganic materials in applications such as electrodes in lithium-ion batteries. All-polymer batteries were first disregarded with respect to other technologies due to their lower energy densities. However, the inherent benefits of redox polymers such as processability, flexibility, recyclability, high-rate performance and the perspective to prepare batteries from renewable resources has re-ignited interest in recent years. This review article aims to provide a comprehensive overview on the state of the art of batteries in which the active material is a redox polymer; including "static" all-polymer batteries and polymer-air batteries but also "flowing" systems such as polymer based redox-flow batteries (pRFB). First, a succinct overview of the recent developments of redox polymers will be given, summarizing the historic trends and developments. Second, an exhaustive discussion of the various battery prototypes will be provided, considering all steps in the development of organic batteries just based in redox polymers. Finally, future perspectives on all-polymer batteries will be discussed, summarizing the major challenges that are still to be overcome to unlock their commercial implementation., Authors thank POLYSTORAGE ETN project, this project has received funding from the European Union's Horizon 2020 research and innovation programme under the Marie Skodowska-Curie grant agreement No 860403. RM and NP thank the Spanish MCI through the SUSBAT project (Ref. RTI2018-101049-B-I0 0) and Juan de la Cierva fellowship [FJC2018-037781-I] (MCI-AEI/FEDER, UE) . NC would like to thank the University of the Basque Country forfunding through a specialization of research staff fellowship (ES-PDOC 19/99) . NG acknowledges the funding from the European Union's Horizon 2020 framework programme under the Marie Skodowska-Curie Agreement No. 101028682.
Addi. Archivo Digital para la Docencia y la Investigación
Publication Artículo científico (JournalArticle)

Bio-based ether solvent and ionic liquid electrolyte for sustainable sodium–air batteries

  • Stigliano, Pierre L.
  • Ortiz Vitoriano, Nagore
  • Medinilla, Lidia
  • Bara, Jason E.
  • López del Amo, Juan Miguel
  • Lezama Diago, Luis María
  • Forsyth, Maria
  • Mecerreyes Molero, David
  • Pozo Gonzalo, Cristina
Unformatted postprint, Sodium-air batteries (SABs) are receiving much attention in the last years due to their high theoretical high energy density (up to 1105 Wh kg-1). However, most of the studies on this technology are still based on organic solvents, in particular diglyme, a chemical considered highly flammable and toxic for the unborn child. Thus, the potential of the greener and low-toxic solvent 1,2,3 trimethoxypropane (TMP) as an alternative electrolyte to diglyme for SABs has been investigated for the first time in this publication. Through this work, it was found the reactivity of tertiary carbon present in TMP towards bare sodium metal. The addition of N-butyl-N-methylpyrrolidinium bis(trifluoromethylsulfonyl)imide ([C4mpyr][TFSI]) as co-solvent proved to be effective to limit the reactivity. Moreover, a Na-β-alumina disk was employed as anode protection, to separate TMP-based electrolyte and sodium metal. The new cell design resulted in improved cell performance: discharge capacities of up to 1.92 and 2.31 mAh cm-2, for 16.6 mol% NaTFSI in TMP and 16.6 mol% NaTFSI in TMP/[C4mpyr][TFSI], respectively. By means of SEM, Raman and 23NMR techniques NaO2 cubes as the major discharge product for both electrolyte compositions were identified. Moreover, it was observed that the hybrid electrolyte hindered the formation of side-products during discharge (ratio NaO2 to side-products in the hybrid electrolyte is 2.4 in comparison with the TMP based electrolyte 0.8) and a different charge mechanism for the dissolution of NaO2 cubes for each electrolyte was observed. The findings of this work show the high potential of TMP as a base solvent for SABs, and the importance of careful electrolyte composition design, in order to step towards greener and less toxic batteries., This project has received funding from the European Union’s Horizon 2020 research and innovation programme under the Marie Skłodowska-Curie grant agreement No 860403. N. Ortiz-Vitoriano acknowledges the R&D&I project PID2020-117626RA-I00 funded by MCIN/AEI/10.13039/501100011033 and Ramon y Cajal grant (RYC-2020-030104-I) funded by MCIN/AEI/10.13039/501100011033 and by FSE invest in your future.