Skip to main content

Resultados relacionados

Resultados totales (Incluyendo duplicados): 7
Encontrada(s) 1 página(s)

Addi. Archivo Digital para la Docencia y la Investigación
Publication Artículo científico (JournalArticle)

From Plastic Waste to New Materials for Energy Storage

  • Olazabal Lorea, Ion
  • Goujon, Nicolas
  • Mantione, Daniele
  • Álvarez Tirado, Marta
  • Jehanno, Coralie
  • Mecerreyes Molero, David
  • Sardon Muguruza, Haritz
The use of plastic waste to develop high added value materials, also known as upcycling, is a useful strategy towards the development of more sustainable materials. More specifically, the use of plastic waste as a feedstock for synthesising new materials for energy storage devices can not only provide a route to upgrading plastic waste but can also help in the search for sustainable materials. This perspective describes recent strategies for the use of plastic waste as a sustainable, cheap and abundant feedstock in the production of new materials for electrochemical energy storage devices such as lithium batteries, sodium batteries and supercapacitors. Two main strategies are described, the development of conducting carbons by combustion of plastic waste and the depolymerization of plastics into new chemicals and materials. In both cases, catalysis has been key to ensuring high efficiency and performance. Future opportunities and challenges are highlighted and hypotheses are made on how the use of plastic waste could enhance the circularity of current energy storage devices., NG acknowledges the funding from the European Union’s Horizon 2020 framework programme under the Marie Skłodowska-Curie agreement No. 101028682. CJ acknowledges the financial support from el Ministerio de ciencia e innovación from the Juan de la Cierva Program (FJC2020-045872-I). The funding from the European Union’s Horizon 2020 framework programme under the Marie Skłodowska-Curie agreement No. 101028975 and Ministerio de ciencia e innovación under PDC2021-121461-I00 project is acknowledged.
Addi. Archivo Digital para la Docencia y la Investigación
Publication Artículo científico (JournalArticle)

A High Performance All-Polymer Symmetric Faradaic Deionization Cell

  • Fombona-Pascual, Alba
  • Patil, Nagaraj
  • García-Quismondo, Enrique
  • Goujon, Nicolas
  • Mecerreyes Molero, David
  • Marcilla, Rebeca
  • Palma, Jesús
  • Lado, Julio L.
Faradaic deionization (FDI) is an emerging and promising electrochemical technology for stable and efficient water desalination. Battery-type energy storage materials applied in FDI have demonstrated to achieve higher salt removal capacities than carbon-based conventional capacitive deionization (CDI) systems. However, most of the reported FDI systems are based on inorganic intercalation compounds that lack cost, safety and sustainability benefits, thereby curtailing the development of a feasible FDI cell. In this work, we introduce an all-polymer rocking chair practical FDI cell, with a symmetric system composed by a redox-active naphthalene-polyimide (named as PNDIE) buckypaper organic electrodes. First, electrochemical performance of PNDIE in 0.05 M NaCl under open-air conditions is evaluated in both three-electrode half- and symmetric FDI full-cell using typical lab-scale electrode dimensions (1.6 mgPNDIE; 0.78 cm2), revealing promising specific capacity (115 mAh g-1) and excellent cycle stability for full-cell experiments (77 % capacity retention over 1000 cycles). Then, all-polymer rocking chair FDI flow cell was constructed with practical PNDIE electrodes (92.2 mgPNDIE; 9.6 cm2) that delivered large desalination capacity (155.4 mg g-1 at 0.01 A g-1) and high salt removal rate and productivity (3.42 mg g-1 min-1 at 0.04 A g-1 and 62 L h-1 m-2, respectively). In addition, long-term stability (23 days) experiments revealed salt adsorption capacity (SAC) retention values over 95% after 100 cycles. The overall electrochemical and deionization performances of the reported technology is far superior than the state-of-the-art CDI and FDI techniques, making it a competitive choice for robust and sustainable “water-energy” electrochemical applications., NP appreciates fellowship IJC2020-043076-I-I funded by MCIN/AEI/0.13039/501100011033 and by the European Union NextGenerationEU/PRTR. NP and RM acknowledge PID2021-124974OB-C21 financed by MCIN/AEI/10.13039/501100011033/FEDER "A way of making Europe". NG acknowledges the funding from the European Union’s Horizon 2020 framework programme under the Marie Skłodowska-Curie agreement No. 101028682. AFP and JJL appreciates the Talento’s program of the Community of Madrid which involves the project SELECTVALUE (2020-T1/AMB-19799). The authors also would like to thank Gonzalo Castro and Ignacio Almonacid for collaborating in the laboratory experiments and the sample analysis.
Addi. Archivo Digital para la Docencia y la Investigación
Publication Artículo científico (JournalArticle)

Dual redox-active porous polyimides as high performance and versatile electrode material for next-generation batteries

  • Goujon, Nicolas
  • Lahnsteiner, Marianne
  • Cerrón Infantes, Daniel A.
  • Moura, Hipassia M.
  • Mantione, Daniele
  • Unterlass, Miriam M.
  • Mecerreyes Molero, David
Energy storage will be a primordial actor of the ecological transition initiated in the energy and transport sectors. As such, innovative approaches to design high-performance electrode materials are crucial for the development of the next generation of batteries. Herein, a novel dual redox-active and porous polyimide network (MTA-MPT), based on mellitic trianhydride (MTA) and 3,7-diamino-N-methylphenothiazine (MPT) monomers, is proposed for applications in both high energy density lithium batteries and symmetric all-organic batteries. The MTA-MPT porous polyimide was synthesized using a novel environmentally-friendly hydrothermal polymerization method. Rooted in its dual redox proprieties, the MTA-MPT porous polyimide exhibits a high theoretical capacity making it a very attractive cathode material for high energy density battery applications. The cycling performance of this novel electrode material was assessed in both high energy density lithium batteries and light-weight symmetric all-organic batteries, displaying excellent rate capability and long-term cycling stability., N. Goujon acknowledges the funding from the European Union's Horizon 2020 framework programme under the Marie Sklodowska-Curie agreement No. 101028682. M. Lahnsteiner, H. M. Moura, D. A. Cerron-Infantes and M. M. Unterlass acknowledge funding through the Austrian Science Fund's (FWF) START programme under grant no. Y1037-N28. We thank Dr Jerpme Roeser and Prof. Arne Thomas (TU Berlin) for gas sorption measurements.
Addi. Archivo Digital para la Docencia y la Investigación
Publication Artículo científico (JournalArticle)

Bio-based Polyhydroxyanthraquinones as High- Voltage Organic Electrode Materials for Batteries

  • Lap, Tijs Tobías
  • Goujon, Nicolas
  • Mantione, Daniele
  • Ruipérez Cillán, Fernando
  • Mecerreyes Molero, David
Unformatted postprint, Organic materials have gained much attention as sustainable electrode materials for batteries. Especially bio-based organic electrode materials (OEMs) are very interesting due to their geographical independency and low environmental impact. However, bio-based OEMs for highvotage batteries remain scarce. Therefore, in this work, a family of bio-based polyhydroxyanthraquinones (PHAQs) - namely 1,2,3,4,5,6,7,8-octahydroxyanthraquinone (OHAQ), 1,2,3,5,6,7-hexahydroxyanthraquinone (HHAQ) and 2,3,6,7-tetrahydroxyanthraquinone (THAQ) - and their redox polymers were synthesized. These PHAQs were synthesized from plantbased precursors and exhibit both a high-potential polyphenolic redox couple (3.5-4.0V vs. Li/Li+) and an anthraquinone redox moiety (2.2-2.8V vs. Li/Li+), while also showing initial charging capacities of up to 381 mAh g-1. To counteract the rapid fading caused by dissolution into the electrolyte, a facile polymerization method was established to synthesize PHAQ polymers. For this, the polymerization of HHAQ served as model reaction where formaldehyde, glyoxal and glutaraldehyde were tested as linkers. The resulting polymers were investigated as cathode materials in lithium metal batteries. PHAQ polymer composites synthesized using formaldehyde as linker and 10 wt.% multi-walled carbon nanotubes (MWCNTs), namely poly(THAQformaldehyde)-10 wt.% MWCNTs and poly(HHAQ-formaldehyde)-10 wt.% MWCNTs, exhibited the best cycling performance in the lithium metal cells, displaying a high-voltage discharge starting at 4.0V (vs. Li/Li+) and retaining 81.6 and 77.3 mAh g-1, respectively after 100 cycles., The authors want to thank the European Union’s Horizon 2020 research and innovation programme under the Marie Skłodowska-Curie grant agreement No. 860403 and No. 101028682, as well as the European Union’s NextGenerationEU/PRTR programme. D.M. thanks Ayuda RYC2021-031668-I financiada por MCIN/AEI/10.13039/501100011033 y por la Unión Europea NextGenerationEU/PRTR.
Addi. Archivo Digital para la Docencia y la Investigación
Publication Artículo científico (JournalArticle)

Organic batteries based on just redox polymers

  • Goujon, Nicolas
  • Casado Pérez, Nerea
  • Patil, Nagaraj
  • Marcilla, Rebeca
  • Mecerreyes Molero, David
[EN]Redox-active polymers have gained interest as environmentally friendly alternative to inorganic materials in applications such as electrodes in lithium-ion batteries. All-polymer batteries were first disregarded with respect to other technologies due to their lower energy densities. However, the inherent benefits of redox polymers such as processability, flexibility, recyclability, high-rate performance and the perspective to prepare batteries from renewable resources has re-ignited interest in recent years. This review article aims to provide a comprehensive overview on the state of the art of batteries in which the active material is a redox polymer; including "static" all-polymer batteries and polymer-air batteries but also "flowing" systems such as polymer based redox-flow batteries (pRFB). First, a succinct overview of the recent developments of redox polymers will be given, summarizing the historic trends and developments. Second, an exhaustive discussion of the various battery prototypes will be provided, considering all steps in the development of organic batteries just based in redox polymers. Finally, future perspectives on all-polymer batteries will be discussed, summarizing the major challenges that are still to be overcome to unlock their commercial implementation., Authors thank POLYSTORAGE ETN project, this project has received funding from the European Union's Horizon 2020 research and innovation programme under the Marie Skodowska-Curie grant agreement No 860403. RM and NP thank the Spanish MCI through the SUSBAT project (Ref. RTI2018-101049-B-I0 0) and Juan de la Cierva fellowship [FJC2018-037781-I] (MCI-AEI/FEDER, UE) . NC would like to thank the University of the Basque Country forfunding through a specialization of research staff fellowship (ES-PDOC 19/99) . NG acknowledges the funding from the European Union's Horizon 2020 framework programme under the Marie Skodowska-Curie Agreement No. 101028682.
Addi. Archivo Digital para la Docencia y la Investigación
Publication Artículo científico (JournalArticle)

Chemical Upcycling of PET Waste towards Terephthalate Redox Nanoparticles for Energy Storage

  • Goujon, Nicolas
  • Demarteau, Jérémy
  • López de Pariza Sanz, Xabier
  • Casado Pérez, Nerea
  • Sardon Muguruza, Haritz
  • Mecerreyes Molero, David
Over 30 million ton of poly(ethylene terephthalate) (PET) is produced each year and no more than 60% of all PET bottles are reclaimed for recycling due to material property deteriorations during the mechanical recycling process. Herein, a sustainable approach is proposed to produce redox-active nanoparticles via the chemical upcycling of poly(ethylene terephthalate) (PET) waste for application in energy storage. Redox-active nanoparticles of sizes lower than 100 nm were prepared by emulsion polymerization of a methacrylic-terephthalate monomer obtained by a simple methacrylate functionalization of the depolymerization product of PET (i.e., bis-hydroxy(2-ethyl) terephthalate, BHET). The initial cyclic voltammetry results of the depolymerization product of PET used as a model compound show a reversible redox process, when using a 0.1 M tetrabutylammonium hexafluorophosphate/dimethyl sulfoxide electrolyte system, with a standard redox potential of −2.12 V vs. Fc/Fc+. Finally, the cycling performance of terephthalate nanoparticles was investigated using a 0.1 M TBAPF6 solution in acetonitrile as electrolyte in a three-electrode cell. The terephthalate anode electrode displays good cycling stability and performance at high C-rate (i.e., ≥5C), delivering a stable specific discharge capacity of 32.8 mAh.g−1 at a C-rate of 30 C, with a capacity retention of 94% after 100 cycles. However, a large hysteresis between the specific discharge and charge capacities and capacity fading are observed at lower C-rate (i.e., ≤2C), suggesting some irreversibility of redox reactions associated with the terephthalate moiety, in particular related to the oxidation process., NC would like to thank the University of the Basque Country for funding through a specialization of research staff fellowship (ESPDOC 19/99). JD thanks WBI International and the Gobierno Vasco/Eusko Jaurlaritza (IT 999–16) for fundings. NG acknowledges the funding from the European Union’s Horizon 2020 framework programme under the Marie Skłodowska-Curie agreement No. 101028682.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Polyimides as Promising Cathodes for Metal-Organic Batteries, A Comparison between Divalent (Ca 2+, Mg 2+) and Monovalent (Li +, Na +) Cations

  • Monti, Damien|||0000-0002-8937-2518
  • Patil, Nagaraj|||0000-0002-2873-6824
  • Black Serra, Ashley Phillip|||0000-0001-7929-5144
  • Raptis, Dionysios
  • Mavrandonakis, Andreas|||0000-0002-5053-8154
  • Froudakis, George E.|||0000-0002-6907-1822
  • Yousef, Ibraheem|||0000-0001-7818-8611
  • Goujon, Nicolas|||0000-0002-0555-2846
  • Mecerreyes, David|||0000-0002-0788-7156
  • Marcilla, Rebeca|||0000-0002-5660-6381
  • Ponrouch, Alexandre|||0000-0002-8232-6324
Ca- and Mg-based batteries represent a more sustainable alternative to Li-ion batteries. However, multivalent cation technologies suffer from poor cation mass transport. In addition, the development of positive electrodes enabling reversible charge storage currently represents one of the major challenges. Organic positive electrodes, in addition to being the most sustainable and potentially low-cost candidates, compared with their inorganic counterparts, currently present the best electrochemical performances in Ca and Mg cells. Unfortunately, organic positive electrodes suffer from relatively low capacity retention upon cycling, the origin of which is not yet fully understood. Here, 1,4,5,8-naphthalenetetracarboxylic dianhydride-derived polyimide was tested in Li, Na, Mg, and Ca cells for the sake of comparison in terms of redox potential, gravimetric capacities, capacity retention, and rate capability. The redox mechanisms were also investigated by means of operando IR experiments, and a parameter affecting most figures of merit has been identified: the presence of contact ion-pairs in the electrolyte.