Skip to main content

Resultados relacionados

Resultados totales (Incluyendo duplicados): 11
Encontrada(s) 1 página(s)

UPCommons. Portal del coneixement obert de la UPC
Publication Artículo científico (JournalArticle)

Low-cost 3D indoor visible light positioning: algorithms and experimental validation, Localització en 3D de baix cost basada en llum: algorismes i validació experimental

  • Khan, Sanjha
  • Paradells Aspas, Josep|||0000-0003-4185-2202
  • Catalán, Marisa
Visible light technology presents significant advancement for indoor IoT applications. These systems offer enhanced bit rate transmission, enabling faster and reliable data transfer. Moreover, optical-based visible light systems facilitate improved location services within indoor environments. However, many of these systems still exhibit limited accuracy within several centimeters, even when relying on costly high-resolution cameras. This paper introduces a novel low-cost visible light system for 3D positioning, designed to enhance indoor positioning accuracy using low-resolution images. Initially, we propose a non-integer pixel (NI-P) algorithm to enhance precision without the need for higher-resolution images. This algorithm allows the system to identify the precise light spot coordinates on the low-resolution images, enabling accurate positioning. Subsequently, we present an algorithm leveraging the precise coordinate data from the previous step to determine the 3D position of objects even in front of errors in the measures. Benefiting from high accuracy, reduced cost, and low complexity, the proposed system is suitable for implementation on low-end hardware platforms, thereby increasing the versatility and feasibility of visible light technologies in indoor settings. Experimental results show an average 2D positioning error of 1.08 cm and 3D error within 1.4 cm at 2.3 m separation between the object and camera, achieved with an average positioning time of 20 ms on a low-end embedded device. Consequently, the proposed system offers fast and highly accurate indoor positioning and tracking capabilities, making it suitable for applications like mobile robots, automated guided vehicles, and indoor parking management. Furthermore, it is easy to deploy and does not require re-calibration., This research was partially funded by the European Union’s Horizon 2020 5GSmartFact project under the Marie Skłodowska-Curie grant agreement ID 956670, by CDTI and the European Union NextGenerationEU/PRTR within the call Ayudas Cervera para Centros Tecnológicos 2023 under grant 6G-DIFERENTE (CER-20231018) and by the Spanish MCIN/AEI/10.13039/501100011033 through project PID 2019-106808RA-100., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publication Artículo científico (JournalArticle)

Deep learning-based UWB-IMU data fusion for indoor positioning in industrial scenario

  • Muthineni, Karthik|||0000-0002-8827-2013
  • Artemenko, Alexander
  • Vidal Manzano, José|||0000-0002-1985-2065
  • Nájar Martón, Montserrat|||0000-0003-3507-5689
  • Catalán Cid, Marisa
  • Paradells Aspas, Josep|||0000-0003-4185-2202
Accurate and precise wireless infrastructure-based positioning systems become crucial as industries move towards flexible, portable, and autonomous transportation systems such as Automated Guided Vehicles (AGVs). Multipath-dominant dynamic environments like industries present significant challenges for wireless signal propagation and affect wireless positioning accuracy due to the interplay of reflected signals from obstacles. The achievable indoor positioning accuracy of the target AGV can be enhanced by fusing the measurements from the wireless infrastructure with the target's onboard sensor data. Nevertheless, the lack of correspondence between the wireless infrastructure and the target's onboard sensors causes the measurements from these two systems to arrive at irregular time steps. Using asynchronous measurements in the data fusion process can degrade the overall positioning accuracy of the target AGV. This paper proposes a novel deep learning-based data fusion approach to deal with asynchronous measurements from the wireless infrastructure Ultra-Wideband (UWB) and the target's onboard Inertial Measurement Unit (IMU) sensor to achieve enhanced positioning accuracy of the target AGV. In particular, a two-stage cascaded Deep Neural Network (DNN) is proposed to deal with the asynchronized measurements from UWB and IMU sensors. The first stage of the DNN is used to obtain the initial position estimate of the AGV by processing the measurements from UWB. Subsequently, the second stage of the DNN fuses the initial position estimate of the AGV with the IMU sensor data to obtain the final enhanced position estimate. The proposed approach is validated with real-world experiments in an indoor industrial scenario using UWB technology in channel 2 (3.7-4.2 GHz) and an IMU sensor placed on an AGV. Moreover, the achievable positioning accuracy and the computational runtime to provide the position estimates with the proposed approach are analyzed. The experimental results show that the proposed approach achieves a mean absolute error of less than 10 cm, outperforming the considered baseline methods, Extended Kalman Filter (EKF) and Long Short-Term Memory (LSTM)., The work of Josep Paradells was supported in part by the Spanish MCIU/AEI/10.13039/501100011033/FEDER/UE through Project PID2023-146378NB-I00 and in part by the Secretaria d’Universitats i Recerca del departament d’Empresa i Coneixement de la Generalitat de Catalunya under Grant 2021 SGR 00330. This work was supported in part by the European Union’s Horizon 2020 Research and Innovation Programme through the Marie Sklodowska-Curie under Grant 956670, in part by Project 6-SENSES under Grant PID2022-138648OB-I00 funded by MCIN/AEI/10.13039/501100011033, and in part by ERDF A way of making Europe., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publication Artículo científico (JournalArticle)

C-SLA-MLO: enhancing SLA compliance in industrial Wi-Fi through cooperative multilink operation

  • Kumar, Suneel
  • Camps Mur, Daniel
  • García Villegas, Eduard|||0000-0002-6005-9608
In the dynamic landscape of Industry 4.0, robust wireless connectivity emerges as a critical enabler for Industrial Internet of Things (IIoT) applications. With the advent of Wi-Fi 7’s multilink operation (MLO), the demand for schedulers capable of meeting diverse Service Level Agreement (SLA) requirements within industrial environments becomes paramount. Addressing this need, this paper introduces Cooperative SLA-MLO (C-SLA-MLO), a novel distributed multilink scheduler that balances data across MLO channels to fulfill the SLA of STAs operating within the same BSS. We provide a simulation-based evaluation where we compare C-SLAMLO with other benchmark approaches, in terms of SLA compliance when varying the SLA characteristics, the level of QoS, or background traffic, showcasing an average reduction of 90% in SLA deviation in the industrial use case. This study contributes practical insights for enhancing wireless connectivity in IIoT, offering potential benefits for industrial network optimization by exploiting the MLO feature brought by the new IEEE 802.11be., This work is supported by the EU’s H2020 5GSmartFact project under the MSCA, Spain grant agreement ID 956670. This work was also partly supported by the Spanish the MCIN/AEI, Spain/ 10.13039/501100011050 through project PID2019-106808RA-I00 and MINECO, Spain and EU PRTR UNICO I+D number TSI-063000-2021-15-6GSMART-EZ.
UPCommons. Portal del coneixement obert de la UPC
Publication Artículo científico (JournalArticle)

Localization-driven multi-robot exploration for indoor search and rescue

  • Maresca, Fabio
  • Devoti, Francesco
  • Encinas Lago, Guillermo
  • Sciancalepore, Vincenzo
  • Paradells Aspas, Josep|||0000-0003-4185-2202
  • Costa Pérez, Xavier
This work was supported in part by the European Union’s Horizon Europe Research and Innovation Programme (MultiX) under Grant 101192521; in part by EU FP for Research and Innovation Horizon 2020 (5GSmartFact) under Grant 956670; in part by the Spanish Ministry of Economic Affairs and Digital Transformation and the European Union—NextGeneration EU (Call UNICO I+D 5G 2021) under Grant TSI-063000-2021-6 and Grant TSI-063000-2021-14; and in part by the CERCA Programme from the Generalitat de Catalunya., Search and Rescue (SAR) operations in complex indoor environments require efficient robotic coordination to ensure timely victim detection while optimizing area coverage and operation time. However, relying solely on exploration may be insufficient, as early victim localization can enhance path planning and prioritize victim access over the exploration of empty areas. In this work, we integrate Radio Frequency (RF)-based victim localization into State-of-Art multi-robot exploration approaches to guide decision-making and prioritize areas with higher likelihood of victim presence. Specifically, we perform probabilistic victim localization using Angle of Arrival (AoA) triangulation of RF signals, enhanced by Received Signal Strength Indicator (RSSI) filtering. This information is then used to dynamically update exploration priorities and replan robot paths toward potential victim locations. We evaluate the proposed method using the Cramér-Rao Lower Bound (CRLB) and Root Mean Square Error (RMSE). Extensive simulations confirm that the proposed approach significantly increases SAR efficiency, allowing up to ~34% of victims to be reached earlier in typical indoor environments and reducing the total mission time by up to 50%., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publication Artículo científico (JournalArticle)

PosGNN: A graph neural network based multimodal data fusion for indoor positioning in industrial Non-Line-of-Sight scenarios

  • Muthineni, Karthik|||0000-0002-8827-2013
  • Artemenko, Alexander
  • Abode, Daniel
  • Vidal Manzano, José|||0000-0002-1985-2065
  • Nájar Martón, Montserrat|||0000-0003-3507-5689
In industrial environments, the wireless infrastructure is functional for offering services such as communication and positioning of industrial assets. However, the frequently occurring Non-Line-of-Sight (NLoS) conditions in industrial scenarios cause the wireless receiver to have positional information from a limited and varying number of wireless transmitters between consecutive time steps, leading to ambiguities in wireless infrastructure-based positioning. In this paper, we propose PosGNN, a novel data fusion solution based on the Graph Neural Network (GNN) approach that allows us to estimate the position of the User Equipment (UE) by fusing the positional information from the available wireless transmitters at each time step with the UE sensor technology. The performance of the proposed method is assessed using an experimental setup of Ultra-Wideband (UWB) technology as wireless infrastructure at 3.7-4.2GHz frequency band, the Inertial Measurement Unit (IMU) as UE-side sensor, and the Automated Guided Vehicle (AGV) as the target UE to be positioned. The experimental results demonstrate the exceptional performance of our approach over the conventional model-based approach, Extended Kalman Filter (EKF), and the data-driven approach, Deep Neural Network (DNN), achieving an average positioning error of less than 15cm in harsh industrial environments., This work was supported in part by the European Union’s Horizon 2020 Research and Innovation Programme through the Marie Sklodowska-Curie under Grant Agreement 956670 and in part by MCIN/AEI/ 10.13039/501100011033 and ERDF A way of making Europe as part of Project 6-SENSES under Grant PID2022-138648OB-I00., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publication Artículo científico (JournalArticle)

Uplink and downlink slice-aware OFDMA resource allocation for smart factory networks

  • Ochonu, Regina
  • Vidal Manzano, José|||0000-0002-1985-2065
  • Bhatia, Gurjot Singh
  • Corre, Yoann
Smart factories require wireless networks capable of supporting diverse applications with stringent and heterogeneous quality of service (QoS) demands. Network slicing enables this by virtualizing resources into isolated slices optimized for specific service types. To effectively manage scarce radio resources and ensure seamless support for mixed-traffic industrial users, this paper proposes a suite of slice-aware resource allocation (RA) frameworks encompassing power and subchannel (SC) allocation for both uplink (UL) and downlink (DL) in industrial time-division duplexing (TDD)-orthogonal frequency division multiple access (OFDMA) networks. We transform diverse QoS constraints—latency, reliability, jitter, and throughput—into unified rate expressions enabling tractable convex optimization across three slice types: capacity limited (CL) for best-effort traffic, ultra-reliable low-latency communication (URLLC) for mission-critical control, and time sensitive (TS) for deterministic periodic traffic. The framework incorporates dynamic TDD adaptation for asymmetric traffic patterns and admission control to manage congestion. The effectiveness of the proposed algorithms in reducing energy consumption while guaranteeing slice-specific QoS is validated using realistic industrial ray-tracing channels and extensive simulations., This work was supported in part by the 5GSmartFact Project funded by European Union’s H2020 Research and Innovation Program through the Marie Skłodowska-Curie under Grant 956670 and in part by the Project 6-SENSES funded by MCIN/AEI/10.13039/501100011033 under Grant PID2022-138648OB-I00., Peer Reviewed
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

C-SLA-MLO: enhancing SLA compliance in industrial Wi-Fi through cooperative multilink operation

  • Kumar, Suneel
  • Camps Mur, Daniel
  • García Villegas, Eduard
In the dynamic landscape of Industry 4.0, robust wireless connectivity emerges as a critical enabler for Industrial Internet of Things (IIoT) applications. With the advent of Wi-Fi 7’s multilink operation (MLO), the demand for schedulers capable of meeting diverse Service Level Agreement (SLA) requirements within industrial environments becomes paramount. Addressing this need, this paper introduces Cooperative SLA-MLO (C-SLA-MLO), a novel distributed multilink scheduler that balances data across MLO channels to fulfill the SLA of STAs operating within the same BSS. We provide a simulation-based evaluation where we compare C-SLAMLO with other benchmark approaches, in terms of SLA compliance when varying the SLA characteristics, the level of QoS, or background traffic, showcasing an average reduction of 90% in SLA deviation in the industrial use case. This study contributes practical insights for enhancing wireless connectivity in IIoT, offering potential benefits for industrial network optimization by exploiting the MLO feature brought by the new IEEE 802.11be., This work is supported by the EU’s H2020 5GSmartFact project under the MSCA, Spain grant agreement ID 956670. This work was also partly supported by the Spanish the MCIN/AEI, Spain/ 10.13039/501100011050 through project PID2019-106808RA-I00 and MINECO, Spain and EU PRTR UNICO I+D number TSI-063000-2021-15-6GSMART-EZ., Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

Uplink and downlink slice-aware OFDMA resource allocation for smart factory networks

  • Ochonu, Regina
  • Vidal Manzano, José
  • Bhatia, Gurjot Singh
  • Corre, Yoann
Smart factories require wireless networks capable of supporting diverse applications with stringent and heterogeneous quality of service (QoS) demands. Network slicing enables this by virtualizing resources into isolated slices optimized for specific service types. To effectively manage scarce radio resources and ensure seamless support for mixed-traffic industrial users, this paper proposes a suite of slice-aware resource allocation (RA) frameworks encompassing power and subchannel (SC) allocation for both uplink (UL) and downlink (DL) in industrial time-division duplexing (TDD)-orthogonal frequency division multiple access (OFDMA) networks. We transform diverse QoS constraints—latency, reliability, jitter, and throughput—into unified rate expressions enabling tractable convex optimization across three slice types: capacity limited (CL) for best-effort traffic, ultra-reliable low-latency communication (URLLC) for mission-critical control, and time sensitive (TS) for deterministic periodic traffic. The framework incorporates dynamic TDD adaptation for asymmetric traffic patterns and admission control to manage congestion. The effectiveness of the proposed algorithms in reducing energy consumption while guaranteeing slice-specific QoS is validated using realistic industrial ray-tracing channels and extensive simulations., This work was supported in part by the 5GSmartFact Project funded by European Union’s H2020 Research and Innovation Program through the Marie Skłodowska-Curie under Grant 956670 and in part by the Project 6-SENSES funded by MCIN/AEI/10.13039/501100011033 under Grant PID2022-138648OB-I00., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

PosGNN: A graph neural network based multimodal data fusion for indoor positioning in industrial Non-Line-of-Sight scenarios

  • Muthineni, Karthik
  • Artemenko, Alexander
  • Abode, Daniel
  • Vidal Manzano, José
  • Nájar Martón, Montserrat
In industrial environments, the wireless infrastructure is functional for offering services such as communication and positioning of industrial assets. However, the frequently occurring Non-Line-of-Sight (NLoS) conditions in industrial scenarios cause the wireless receiver to have positional information from a limited and varying number of wireless transmitters between consecutive time steps, leading to ambiguities in wireless infrastructure-based positioning. In this paper, we propose PosGNN, a novel data fusion solution based on the Graph Neural Network (GNN) approach that allows us to estimate the position of the User Equipment (UE) by fusing the positional information from the available wireless transmitters at each time step with the UE sensor technology. The performance of the proposed method is assessed using an experimental setup of Ultra-Wideband (UWB) technology as wireless infrastructure at 3.7-4.2GHz frequency band, the Inertial Measurement Unit (IMU) as UE-side sensor, and the Automated Guided Vehicle (AGV) as the target UE to be positioned. The experimental results demonstrate the exceptional performance of our approach over the conventional model-based approach, Extended Kalman Filter (EKF), and the data-driven approach, Deep Neural Network (DNN), achieving an average positioning error of less than 15cm in harsh industrial environments., This work was supported in part by the European Union’s Horizon 2020 Research and Innovation Programme through the Marie Sklodowska-Curie under Grant Agreement 956670 and in part by MCIN/AEI/ 10.13039/501100011033 and ERDF A way of making Europe as part of Project 6-SENSES under Grant PID2022-138648OB-I00., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

Deep learning-based UWB-IMU data fusion for indoor positioning in industrial scenario

  • Muthineni, Karthik
  • Artemenko, Alexander
  • Vidal Manzano, José
  • Nájar Martón, Montserrat
  • Catalán Cid, Marisa
  • Paradells Aspas, Josep
Accurate and precise wireless infrastructure-based positioning systems become crucial as industries move towards flexible, portable, and autonomous transportation systems such as Automated Guided Vehicles (AGVs). Multipath-dominant dynamic environments like industries present significant challenges for wireless signal propagation and affect wireless positioning accuracy due to the interplay of reflected signals from obstacles. The achievable indoor positioning accuracy of the target AGV can be enhanced by fusing the measurements from the wireless infrastructure with the target's onboard sensor data. Nevertheless, the lack of correspondence between the wireless infrastructure and the target's onboard sensors causes the measurements from these two systems to arrive at irregular time steps. Using asynchronous measurements in the data fusion process can degrade the overall positioning accuracy of the target AGV. This paper proposes a novel deep learning-based data fusion approach to deal with asynchronous measurements from the wireless infrastructure Ultra-Wideband (UWB) and the target's onboard Inertial Measurement Unit (IMU) sensor to achieve enhanced positioning accuracy of the target AGV. In particular, a two-stage cascaded Deep Neural Network (DNN) is proposed to deal with the asynchronized measurements from UWB and IMU sensors. The first stage of the DNN is used to obtain the initial position estimate of the AGV by processing the measurements from UWB. Subsequently, the second stage of the DNN fuses the initial position estimate of the AGV with the IMU sensor data to obtain the final enhanced position estimate. The proposed approach is validated with real-world experiments in an indoor industrial scenario using UWB technology in channel 2 (3.7-4.2 GHz) and an IMU sensor placed on an AGV. Moreover, the achievable positioning accuracy and the computational runtime to provide the position estimates with the proposed approach are analyzed. The experimental results show that the proposed approach achieves a mean absolute error of less than 10 cm, outperforming the considered baseline methods, Extended Kalman Filter (EKF) and Long Short-Term Memory (LSTM)., The work of Josep Paradells was supported in part by the Spanish MCIU/AEI/10.13039/501100011033/FEDER/UE through Project PID2023-146378NB-I00 and in part by the Secretaria d’Universitats i Recerca del departament d’Empresa i Coneixement de la Generalitat de Catalunya under Grant 2021 SGR 00330. This work was supported in part by the European Union’s Horizon 2020 Research and Innovation Programme through the Marie Sklodowska-Curie under Grant 956670, in part by Project 6-SENSES under Grant PID2022-138648OB-I00 funded by MCIN/AEI/10.13039/501100011033, and in part by ERDF A way of making Europe., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

Low-cost 3D indoor visible light positioning: algorithms and experimental validation, Localització en 3D de baix cost basada en llum: algorismes i validació experimental

  • Khan, Sanjha
  • Paradells Aspas, Josep
  • Catalán, Marisa
Visible light technology presents significant advancement for indoor IoT applications. These systems offer enhanced bit rate transmission, enabling faster and reliable data transfer. Moreover, optical-based visible light systems facilitate improved location services within indoor environments. However, many of these systems still exhibit limited accuracy within several centimeters, even when relying on costly high-resolution cameras. This paper introduces a novel low-cost visible light system for 3D positioning, designed to enhance indoor positioning accuracy using low-resolution images. Initially, we propose a non-integer pixel (NI-P) algorithm to enhance precision without the need for higher-resolution images. This algorithm allows the system to identify the precise light spot coordinates on the low-resolution images, enabling accurate positioning. Subsequently, we present an algorithm leveraging the precise coordinate data from the previous step to determine the 3D position of objects even in front of errors in the measures. Benefiting from high accuracy, reduced cost, and low complexity, the proposed system is suitable for implementation on low-end hardware platforms, thereby increasing the versatility and feasibility of visible light technologies in indoor settings. Experimental results show an average 2D positioning error of 1.08 cm and 3D error within 1.4 cm at 2.3 m separation between the object and camera, achieved with an average positioning time of 20 ms on a low-end embedded device. Consequently, the proposed system offers fast and highly accurate indoor positioning and tracking capabilities, making it suitable for applications like mobile robots, automated guided vehicles, and indoor parking management. Furthermore, it is easy to deploy and does not require re-calibration., This research was partially funded by the European Union’s Horizon 2020 5GSmartFact project under the Marie Skłodowska-Curie grant agreement ID 956670, by CDTI and the European Union NextGenerationEU/PRTR within the call Ayudas Cervera para Centros Tecnológicos 2023 under grant 6G-DIFERENTE (CER-20231018) and by the Spanish MCIN/AEI/10.13039/501100011033 through project PID 2019-106808RA-100., Peer Reviewed, Postprint (published version)