Skip to main content

Resultados relacionados

Resultados totales (Incluyendo duplicados): 8
Encontrada(s) 1 página(s)

UPCommons. Portal del coneixement obert de la UPC
Publication Artículo científico (JournalArticle)

Digital twin-assisted lightpath provisioning and nonlinear mitigation in C+L+S multiband optical networks

  • Ghasrizadeh Dezfouli, Mohammad Sadegh
  • Khare, Prasunika
  • Costa, Nelson
  • Ruiz Ramírez, Marc|||0000-0001-6429-6347
  • Napoli, Antonio
  • Pedro, João|||0000-0003-4471-7401
  • Velasco Esteban, Luis Domingo|||0000-0002-7345-296X
Multiband (MB) optical transmission targets increasing the capacity of operators’ optical transport networks. However, nonlinear impairments (NLI) affect each optical channel in the C+L+S bands differently, and, therefore, the routing and spectrum assignment (RSA) problem needs to be complemented with fast and accurate tools to consider the quality of transmission (QoT) within the provisioning process. This paper proposes a digital twin-assisted approach for lightpath provisioning to provide a complete solution for the RSA problem that ensures the required QoT in MB optical networks. The OCATA time domain digital twin is proposed, not only to estimate the QoT of a selected path but also to support the QoT-based channel assignment process. OCATA is based on a Deep Neural Network (DNN) to model the propagation of the optical signal. However, because of the different impacts of nonlinear noise on each channel and the large number of channels that need to be considered in C+L+S MB scenarios, OCATA needs to be adapted to make it scalable, while keeping its high accuracy and fast QoT estimation characteristics. In consequence, a complete methodology is proposed in this work that limits the number of channels being modeled to just a few. Moreover, OCATA-MB helps to mitigate NLI noise by programming the receiver at the provisioning time and thus with very little complexity compared to its equivalent implemented during the operation. NLI noise mitigation can be applied in the case when a lightpath cannot be provisioned because none of the available channels can provide the required QoT, making it an advantageous tool for reducing connection blocking. Exhaustive simulation results demonstrate the remarkable accuracy of OCATA-MB in estimating the QoT for any channel. Interestingly, by utilizing the proposed OCATA-MB-assisted lightpath provisioning approach, a reduction of the blocking ratio exceeding 50% when compared to traditional approaches is shown when NLI noise mitigation is not applied. If NLI mitigation is implemented, an additional over 50% blocking reduction is achieved., The research leading to these results has received funding from the European Commission MSCA-DN NESTOR (G.A. 101119983) and MSCA-EID MENTOR (G.A. 956713), from the SNS JU under the European Union’s Horizon Europe SEASON (G.A. 101096120), and from the ICREA Institution., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publication Artículo científico (JournalArticle)

Twining digital subcarrier multiplexed optical signals with OCATA for lightpath provisioning

  • Devigili, Mariano|||0000-0003-0613-5195
  • Sequeira, Diogo Gonçalo
  • Torres Ferrera, Pablo
  • Srivallapanondh, Sasipim
  • Costa, Nelson
  • Ruiz Ramírez, Marc|||0000-0001-6429-6347
  • Castro, Carlos|||0000-0003-2411-2907
  • Napoli, Antonio
  • Pedro, João|||0000-0003-4471-7401
  • Velasco Esteban, Luis Domingo|||0000-0002-7345-296X
Digital Twins (DT) are needed in elastic optical networks to enable further advance and pave the way towards autonomous networks. Dynamical models self-adjusting with their physical counterpart have to maintain low computational complexity and guarantee good accuracy, regardless of the network topology and the technology supporting the optical lightpath. In this work, we propose data-driven models based on cascaded learning for single carrier signal as well as digital subcarrier multiplexing signals. Firstly, we explore the potentials of such a DT by proposing an algorithm for lightpath provisioning. In addition, the performances of the proposed models are compared with the ones of analytical models. Secondly, we experimentally evaluate its accuracy to predict the impact of optical filtering penalties. The simulations show an overall good accuracy for different signal formats and demonstrate their viability for lightpath provisioning. Similarly, the experimental results demonstrate the feasibility of implementing such models to estimate the quality of transmission for digital subcarrier multiplexed signals., The research leading to these results has received funding from the European Community through the MSCA MENTOR (G.A. 956713), the European Union's Horizon Europe research and innovation programme SEASON (G.A. 101096120), the MICINN IBON (PID2020-114135RB-I00) and from the ICREA Institution., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publication Artículo científico (JournalArticle)

Applications of the OCATA time domain digital twin: from QoT estimation to failure management

  • Devigili, Mariano|||0000-0003-0613-5195
  • Ruiz Ramírez, Marc|||0000-0001-6429-6347
  • Costa, Nelson
  • Castro, Carlos|||0000-0003-2411-2907
  • Napoli, Antonio
  • Pedro, João|||0000-0003-4471-7401
  • Velasco Esteban, Luis Domingo|||0000-0002-7345-296X
Optical in-phase and quadrature (IQ) constellations enclose valuable information regarding the optical elements traversed by the optical signal. Such information can be extracted and exploited by algorithms and models within an optical layer digital twin. In this paper, we investigate the feasibility of extracting information from IQ constellations and its use for both accurate quality of transmission (QoT) estimation and efficient failure management within. First, we observe the correlations between the measured QoT of lightpaths and the value of specific features extracted from IQ constellation samples collected from the optical receiver and design deep neural network (DNN) models for QoT estimation. Next, specific DNN models and algorithms that exploit IQ constellation features are proposed for soft-failure detection, identification, and severity estimation. Results from both simulation and experiments show noticeable accuracy on the estimation of QoT and on the prediction of failures affecting the transmitter, optical filters, and amplifiers., HORIZON EUROPE Framework Programme [SEASON (101096120)]; Horizon 2020 Framework Programme [MSCA-EID MENTOR (956713)]; Ministerio de Ciencia e Innovación [IBON (PID2020-114135RB-I00)]; Institució Catalana de Recerca i Estudis Avançats., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publication Artículo científico (JournalArticle)

Simulation and modelling of C+L+S multiband optical transmission for the OCATA time domain digital twin

  • Khare, Prasunika
  • Costa, Nelson
  • Ruiz Ramírez, Marc|||0000-0001-6429-6347
  • Napoli, Antonio
  • Comellas Colomé, Jaume|||0000-0002-9129-0562
  • Pedro, João|||0000-0003-4471-7401
  • Velasco Esteban, Luis Domingo|||0000-0002-7345-296X
This paper is an extended version of our published paper: Khare, P.; Costa, N.; Pedro, J.; Napoli, A.; Arpanaei, F.; Comellas, J.; Ruiz, M.; Velasco, L. SSMS: A Split Step MultiBand Simulation Software. In Proceedings of the IEEE International Conference on Transparent Optical Networks (ICTON), Bucharest, Romania, 2–6 July 2023., C+L+S multiband (MB) optical transmission has the potential to increase the capacity of optical transport networks, and thus, it is a possible solution to cope with the traffic increase expected in the years to come. However, the introduction of MB optical technology needs to come together with the needed tools that support network planning and operation. In particular, quality of transmission (QoT) estimation is needed for provisioning optical MB connections. In this paper, we concentrate on modelling MB optical transmission for provide fast and accurate QoT estimation and propose machine learning (ML) approaches based on neural networks, which can be easily integrated into an optical layer digital twin (DT) solution. We start by considering approaches that can be used for accurate signal propagation modelling. Even though solutions such as the split-step Fourier method (SSFM) for solving the nonlinear Schrödinger equation (NLSE) have limited application for QoT estimation during provisioning because of their very high complexity and time consumption, they could be used to generate datasets for ML model creation. However, even that can be hard to carry out on a fully loaded MB system with hundreds of channels. In addition, in MB optical transmission, interchannel stimulated Raman scattering (ISRS) becomes a major effect, which adds more complexity. In view of that, the fourth-order Runge–Kutta in the interaction picture (RK4IP) method, complemented with an adaptive step size algorithm to further reduce the computation time, is evaluated as an alternative to reduce time complexity. We show that RK4IP provided an accuracy comparable to that of the SSFM with reduced computation time, which enables its application for MB optical transmission simulation. Once datasets were generated using the adaptive step size RK4IP method, two ML modelling approaches were considered to be integrated in the OCATA DT, where models predict optical signal propagation in the time domain. Being able to predict the optical signal in the time domain, as it will be received after propagation, opens opportunities for automating network operation, including connection provisioning and failure management. In this paper, we focus on comparing the proposed ML modelling approaches in terms of the models’ general and QoT estimation accuracy., The research leading to these results has received funding from the European Commission MSCA-EID MENTOR (G.A. 956713), from the SNS JU under the European Union’s Horizon Europe SEASON (G.A. 101096120), and from the ICREA Institution., Peer Reviewed
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

Applications of the OCATA time domain digital twin: from QoT estimation to failure management

  • Devigili, Mariano
  • Ruiz Ramírez, Marc
  • Costa, Nelson
  • Castro, Carlos
  • Napoli, Antonio
  • Pedro, João
  • Velasco Esteban, Luis Domingo
Optical in-phase and quadrature (IQ) constellations enclose valuable information regarding the optical elements traversed by the optical signal. Such information can be extracted and exploited by algorithms and models within an optical layer digital twin. In this paper, we investigate the feasibility of extracting information from IQ constellations and its use for both accurate quality of transmission (QoT) estimation and efficient failure management within. First, we observe the correlations between the measured QoT of lightpaths and the value of specific features extracted from IQ constellation samples collected from the optical receiver and design deep neural network (DNN) models for QoT estimation. Next, specific DNN models and algorithms that exploit IQ constellation features are proposed for soft-failure detection, identification, and severity estimation. Results from both simulation and experiments show noticeable accuracy on the estimation of QoT and on the prediction of failures affecting the transmitter, optical filters, and amplifiers., HORIZON EUROPE Framework Programme [SEASON (101096120)]; Horizon 2020 Framework Programme [MSCA-EID MENTOR (956713)]; Ministerio de Ciencia e Innovación [IBON (PID2020-114135RB-I00)]; Institució Catalana de Recerca i Estudis Avançats., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

Twining digital subcarrier multiplexed optical signals with OCATA for lightpath provisioning

  • Devigili, Mariano
  • Sequeira, Diogo Gonçalo
  • Torres Ferrera, Pablo
  • Srivallapanondh, Sasipim
  • Costa, Nelson
  • Ruiz Ramírez, Marc
  • Castro, Carlos
  • Napoli, Antonio
  • Pedro, João
  • Velasco Esteban, Luis Domingo
Digital Twins (DT) are needed in elastic optical networks to enable further advance and pave the way towards autonomous networks. Dynamical models self-adjusting with their physical counterpart have to maintain low computational complexity and guarantee good accuracy, regardless of the network topology and the technology supporting the optical lightpath. In this work, we propose data-driven models based on cascaded learning for single carrier signal as well as digital subcarrier multiplexing signals. Firstly, we explore the potentials of such a DT by proposing an algorithm for lightpath provisioning. In addition, the performances of the proposed models are compared with the ones of analytical models. Secondly, we experimentally evaluate its accuracy to predict the impact of optical filtering penalties. The simulations show an overall good accuracy for different signal formats and demonstrate their viability for lightpath provisioning. Similarly, the experimental results demonstrate the feasibility of implementing such models to estimate the quality of transmission for digital subcarrier multiplexed signals., The research leading to these results has received funding from the European Community through the MSCA MENTOR (G.A. 956713), the European Union's Horizon Europe research and innovation programme SEASON (G.A. 101096120), the MICINN IBON (PID2020-114135RB-I00) and from the ICREA Institution., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

Digital twin-assisted lightpath provisioning and nonlinear mitigation in C+L+S multiband optical networks

  • Ghasrizadeh Dezfouli, Mohammad Sadegh
  • Khare, Prasunika
  • Costa, Nelson
  • Ruiz Ramírez, Marc
  • Napoli, Antonio
  • Pedro, João
  • Velasco Esteban, Luis Domingo
Multiband (MB) optical transmission targets increasing the capacity of operators’ optical transport networks. However, nonlinear impairments (NLI) affect each optical channel in the C+L+S bands differently, and, therefore, the routing and spectrum assignment (RSA) problem needs to be complemented with fast and accurate tools to consider the quality of transmission (QoT) within the provisioning process. This paper proposes a digital twin-assisted approach for lightpath provisioning to provide a complete solution for the RSA problem that ensures the required QoT in MB optical networks. The OCATA time domain digital twin is proposed, not only to estimate the QoT of a selected path but also to support the QoT-based channel assignment process. OCATA is based on a Deep Neural Network (DNN) to model the propagation of the optical signal. However, because of the different impacts of nonlinear noise on each channel and the large number of channels that need to be considered in C+L+S MB scenarios, OCATA needs to be adapted to make it scalable, while keeping its high accuracy and fast QoT estimation characteristics. In consequence, a complete methodology is proposed in this work that limits the number of channels being modeled to just a few. Moreover, OCATA-MB helps to mitigate NLI noise by programming the receiver at the provisioning time and thus with very little complexity compared to its equivalent implemented during the operation. NLI noise mitigation can be applied in the case when a lightpath cannot be provisioned because none of the available channels can provide the required QoT, making it an advantageous tool for reducing connection blocking. Exhaustive simulation results demonstrate the remarkable accuracy of OCATA-MB in estimating the QoT for any channel. Interestingly, by utilizing the proposed OCATA-MB-assisted lightpath provisioning approach, a reduction of the blocking ratio exceeding 50% when compared to traditional approaches is shown when NLI noise mitigation is not applied. If NLI mitigation is implemented, an additional over 50% blocking reduction is achieved., The research leading to these results has received funding from the European Commission MSCA-DN NESTOR (G.A. 101119983) and MSCA-EID MENTOR (G.A. 956713), from the SNS JU under the European Union’s Horizon Europe SEASON (G.A. 101096120), and from the ICREA Institution., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

Simulation and modelling of C+L+S multiband optical transmission for the OCATA time domain digital twin

  • Khare, Prasunika
  • Costa, Nelson
  • Ruiz Ramírez, Marc
  • Napoli, Antonio
  • Comellas Colomé, Jaume
  • Pedro, João
  • Velasco Esteban, Luis Domingo
This paper is an extended version of our published paper: Khare, P.; Costa, N.; Pedro, J.; Napoli, A.; Arpanaei, F.; Comellas, J.; Ruiz, M.; Velasco, L. SSMS: A Split Step MultiBand Simulation Software. In Proceedings of the IEEE International Conference on Transparent Optical Networks (ICTON), Bucharest, Romania, 2–6 July 2023., C+L+S multiband (MB) optical transmission has the potential to increase the capacity of optical transport networks, and thus, it is a possible solution to cope with the traffic increase expected in the years to come. However, the introduction of MB optical technology needs to come together with the needed tools that support network planning and operation. In particular, quality of transmission (QoT) estimation is needed for provisioning optical MB connections. In this paper, we concentrate on modelling MB optical transmission for provide fast and accurate QoT estimation and propose machine learning (ML) approaches based on neural networks, which can be easily integrated into an optical layer digital twin (DT) solution. We start by considering approaches that can be used for accurate signal propagation modelling. Even though solutions such as the split-step Fourier method (SSFM) for solving the nonlinear Schrödinger equation (NLSE) have limited application for QoT estimation during provisioning because of their very high complexity and time consumption, they could be used to generate datasets for ML model creation. However, even that can be hard to carry out on a fully loaded MB system with hundreds of channels. In addition, in MB optical transmission, interchannel stimulated Raman scattering (ISRS) becomes a major effect, which adds more complexity. In view of that, the fourth-order Runge–Kutta in the interaction picture (RK4IP) method, complemented with an adaptive step size algorithm to further reduce the computation time, is evaluated as an alternative to reduce time complexity. We show that RK4IP provided an accuracy comparable to that of the SSFM with reduced computation time, which enables its application for MB optical transmission simulation. Once datasets were generated using the adaptive step size RK4IP method, two ML modelling approaches were considered to be integrated in the OCATA DT, where models predict optical signal propagation in the time domain. Being able to predict the optical signal in the time domain, as it will be received after propagation, opens opportunities for automating network operation, including connection provisioning and failure management. In this paper, we focus on comparing the proposed ML modelling approaches in terms of the models’ general and QoT estimation accuracy., The research leading to these results has received funding from the European Commission MSCA-EID MENTOR (G.A. 956713), from the SNS JU under the European Union’s Horizon Europe SEASON (G.A. 101096120), and from the ICREA Institution., Peer Reviewed, Postprint (published version)