Skip to main content

NANOTECNOLOGIA APLICADA A LA MEJORA DE LA PUESTA EN OBRA Y MADURACION DE MEZCLAS AUTOCOMPACTANTES. CARACTERIZACION Y METODOLOGIA EXPERIMENTAL MULTIESCALA

BIA2016-77911-R

•
Funding agency name Agencia Estatal de Investigación
Funding agency acronym AEI
Program Programa Estatal de I+D+i Orientado a los Retos de la Sociedad
Call Proyectos I+D+i Retos de Investigación
Call year 2016
State Plan 2013-2016 Plan Estatal de Investigación Científica y Técnica y de Innovación
Beneficiary centre UNIVERSIDAD DE ALCALA

Resultados relacionados

Resultados totales (Incluyendo duplicados): 9
Encontrada(s) 1 página(s)

DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Effect of curing temperature and relative humidity on early age and hardened properties of SCC

  • Barluenga, Gonzalo
  • Guardia, Cynthia
  • Puentes, Javier
The type and particle size of the additions used in SCC influence the setting and early hardening, modifying hydration speed and the development of initial properties. These processes are also altered by the curing temperature and relative humidity (RH) during Early age (EA) and would also affect SCC hardened properties. An experimental study was carried out to compare the effect of different curing temperatures, 10, 20 and 30 °C, and RH, 40 and 80%, on EA and hardened properties of SCC incorporating limestone filler (LF), microsilica (MS) and nanosilica (NS). It was observed that temperature modified the reaction speed and the evolution of EA properties while relative humidity affected evaporation and shrinkage at early age and hardened porosity and stiffness. SCC microstructure and pore-network formation were found to depend on the combination of curing conditions and the type and particle size of the additions., SL and Cementos Portland Valderrivas and the financial support provided by the grants: PII-14-022-P, co-funded by JC Castilla-La Mancha and FEDER and BIA2013-48480-C2-2-R and BIA2016-77911-R, funded by the Spanish Ministry of Economy and Competitiveness., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Effect of full scale pumping at early age and on hardened microstructure and properties of SCC with fly ash in hot-dry curing conditions

  • Barluenga, Gonzalo
  • Giménez, M.
  • Sepulcre, A.
  • Palomar, Irene
An experimental study on the effect of real scale hot-dry climate conditions and full scale cast-in-place by pumping of Self-Compacting Concrete (SCC) with fly ash (FA) was carried out. The influence of water to binder ratio (w/b), mixing scale, curing conditions and cast-in-place by pumping on the early age and hardened properties and on the hardened microstructure were analyzed in SCC samples manufactured in the laboratory, in a full scale concrete plant and in an on-site application of pumped SCC. The aim of the study was to compare the early age and hardened properties of SCC mixtures manufactured in laboratory conditions and in real scale applications. It was found that the samples manufactured outside the laboratory showed changes on their properties that can be related to changes in their microstructure. The increase of w/b produced larger air gaps at the interfacial transition zone (ITZ), increased total porosity and mezzo-porosity and reduced apparent density, compressive strength and ultrasonic pulse parameters. The use of an industrial mixer in hot-dry real scale climate conditions increased w/b required to achieve self-compactability, amplified fly ash reactivity and enlarged air gaps in the ITZ. Cast in-place by pumping in hot-dry climate conditions accelerated cement hydration at early age and increased mezzo-porosity and air permeability, while reduced compressive strength., The study has been financed by the Spanish Ministry of Economy and Competitiveness, grants BIA2013-48480-C2-2-R, BIA2013-48480-C2-1-R and BIA2016-77911-R. The authors greatly acknowledge the support of the companies OHL and SIKA Spain., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Methodology for monitoring cement based materials at early age combining NDT techniques

  • Barluenga, Gonzalo
  • Puentes, Javier
  • Palomar, Irene
  • Guardia, Cynthia
The chemical process that takes place in Cement Based Materials (CBM) produces microstructural changes and the development of mechanical properties at Early Age (EA). CBM composition, curing conditions (temperature, relative humidity and wind speed) and structural member size can modify the chemical reaction and microstructural development, producing undesirable effects, as EA shrinkage and cracking. Thus, a robust testing methodology is required to monitor CBM at EA. To take advantage of Non-Destructive Tests (NDT) for EA monitoring but considering the uncertainty related to indirect measurements, a testing methodology that combines simultaneous measuring of temperature, capillary pressure, evaporation rate, free shrinkage, and p- and s- waves Ultrasonic Pulse Velocities (UPV) was developed. The multi-parameter technique allows to follow both the chemical, microstructural and mechanical properties development processes that take place in CBM at EA. An integrated analysis allowed defining new EA shrinkage, stress demand estimation and cracking risk models combining EA NDT parameters. The experimental setup presented in this study can be used for pastes and concretes and was verified in laboratory conditions, inside a climate chamber and in on-site real scale applications., The authors gratefully acknowledge the funding grants: CCG-08-UAH/MAT 40, co-funded by the University of Alcala and the Community of Madrid; PPII-2014-022-P co-funded by J C Castilla-La Mancha and FEDER; and SCC_Pump (BIA2013-48480-C2-2-R) and NanoCompaC (BIA2016-77911-R) funded by the Spanish Ministry of Economy and Competitiveness., Peer reviewed
e_Buah Biblioteca Digital Universidad de Alcalá
Publication Artículo científico (JournalArticle)

Methodology for monitoring Cement Based Materials at Early Age combining NDT techniques

  • Barluenga Badiola, Gonzalo|||0000-0002-2996-3412
  • Puentes Mojica, Javier|||0000-0001-8748-7664
  • Palomar Herrero, Irene|||0000-0003-2743-3618
  • Guardia Martín, Cynthia|||0000-0003-4442-8933
The chemical process that takes place in Cement Based Materials (CBM) produces microstructural changes and the development of mechanical properties at Early Age (EA). CBM composition, curing conditions (temperature, relative humidity and wind speed) and structural member size can modify the chemical reaction and microstructural development, producing undesirable effects, as EA shrinkage and cracking. Thus, a robust testing methodology is required to monitor CBM at EA. To take advantage of Non-Destructive Tests (NDT) for EA monitoring but considering the uncertainty related to indirect measurements, a testing methodology that combines simultaneous measuring of temperature, capillary pressure, evaporation rate, free shrinkage, and p- and s- waves Ultrasonic Pulse Velocities (UPV) was developed. The multi-parameter technique allows to follow both the chemical, microstructural and mechanical properties development processes that take place in CBM at EA. An integrated analysis allowed defining new EA shrinkage, stress demand estimation and cracking risk models combining EA NDT parameters. The experimental setup presented in this study can be used for pastes and concretes and was verified in laboratory conditions, inside a climate chamber and in on-site real scale applications., Universidad de Alcalá, Comunidad de Madrid, Junta de Comunidades de Castilla la Mancha, Unión Europea (Fondo Europeo de Desarrollo), Ministerio de Economía y Competitividad
e_Buah Biblioteca Digital Universidad de Alcalá
Publication Artículo científico (JournalArticle)

Lateral pressure of nano-engineered SCC combining nanoclays, nanosilica and viscosity modifying admixtures

  • Varela Recio, Hugo|||0000-0001-8094-6071
  • Barluenga Badiola, Gonzalo|||0000-0002-2996-3412
  • Puentes Mojica, Javier|||0000-0001-8748-7664
  • Palomar Herrero, Irene|||0000-0003-2743-3618
  • Rodríguez López, Ángel José Alfredo
Self-compacting concrete (SCC) is an energy efficient building technology widely used for multiple constructive applications. However, the large flowability of fresh SCC produces an increase of the lateral pressure exerted on the formwork regarding to conventional concretes. One solution to reduce the maximum lateral pressure (Pmax) is to modulate the fresh performance of SCC by the addition of rheology modifiers. Among them, nanocomponents highlight due to their larger efficiency derived from their tiny particle size. In this study, the efficiency of nano-engineered SCC (NE-SCC) combining small amounts of nanocomponents, as nanoclays and nanosilica, with viscosity modifying admixtures (VMAs) to decrease Pmax is explored. Lateral pressure exerted by NE-SCC on cylindrical columns subjected to self-weight and to air pressure was assessed using wall and capillary pressure sensors over time. It was found that the incorporation of attapulgite and bentonite nanoclays combined with VMAs could reduce Pmax. This reduction was measured with wall and capillary pressure sensors on self-weight column and air pressure column laboratory tests, and good correlation between them over time was obtained. A predictive model of the maximum lateral Pressure (Pmax) and its evolution over time (PL) was proposed, related to SCC paste thixotropy (Athix,p), casting height (H) and SCC pressure decay coefficient (Cd)., Ministerio de Economía y Competitividad, Ministerio de Ciencia e Innovación, Universidad de Alcalá
e_Buah Biblioteca Digital Universidad de Alcalá
Publication Artículo científico (JournalArticle)

Effect of curing temperature and relative humidity on early age and hardened properties of SCC

  • Barluenga Badiola, Gonzalo|||0000-0002-2996-3412
  • Guardia Martín, Cynthia|||0000-0003-4442-8933
  • Puentes Mojica, Javier|||0000-0001-8748-7664
The type and particle size of the additions used in SCC influence the setting and early hardening, modifying hydration speed and the development of initial properties. These processes are also altered by the curing temperature and relative humidity (RH) during Early age (EA) and would also affect SCC hardened properties. An experimental study was carried out to compare the effect of different curing temperatures, 10, 20 and 30 ºC, and RH, 40 and 80 %, on EA and hardened properties of SCC incorporating limestone filler (LF), microsilica (MS) and nanosilica (NS). It was observed that temperature modified the reaction speed and the evolution of EA properties while relative humidity affected evaporation and shrinkage at early age and hardened porosity and stiffness. SCC microstructure and pore-network formation were found to depend on the combination of curing conditions and the type and particle size of the additions., Junta de Comunidades de Castilla la Mancha, Unión Europea (Fondo Europeo de Desarrollo), Ministerio de Economía y Competitividad
e_Buah Biblioteca Digital Universidad de Alcalá
Publication Artículo científico (JournalArticle)

Effect of full scale pumping at early age and on hardened microstructure and properties of SCC with fly ash in hot-dry curing conditions

  • Barluenga Badiola, Gonzalo|||0000-0002-2996-3412
  • Giménez, Mercedes
  • Sepulcre Aguilar, Alberto
  • Palomar Herrero, Irene|||0000-0003-2743-3618
An experimental study on the effect of real scale hot-dry climate conditions and full scale cast-in-place by pumping of Self-Compacting Concrete (SCC) with fly ash (FA) was carried out. The influence of water to binder ratio (w/b), mixing scale, curing conditions and cast-in-place by pumping on the early age and hardened properties and on the hardened microstructure were analyzed in SCC samples manufactured in the laboratory, in a full scale concrete plant and in an on-site application of pumped SCC. The aim of the study was to compare the early age and hardened properties of SCC mixtures manufactured in laboratory conditions and in real scale applications. It was found that the samples manufactured outside the laboratory showed changes on their properties that can be related to changes in their microstructure. The increase of w/b produced larger air gaps at the interfacial transition zone (ITZ), increased total porosity and mezzo-porosity and reduced apparent density, compressive strength and ultrasonic pulse parameters. The use of an industrial mixer in hot-dry real scale climate conditions increased w/b required to achieve self-compactability, amplified fly ash reactivity and enlarged air gaps in the ITZ. Cast in-place by pumping in hot-dry climate conditions accelerated cement hydration at early age and increased mezzo-porosity and air permeability, while reduced compressive strength., Ministerio de Economía y Competitividad
e_Buah Biblioteca Digital Universidad de Alcalá
Publication Artículo científico (JournalArticle)

Synergies on rheology and structural build-up of fresh cement pastes with nanoclays, nanosilica and viscosity modifying admixtures

  • Varela Recio, Hugo|||0000-0001-8094-6071
  • Barluenga Badiola, Gonzalo|||0000-0002-2996-3412
  • Palomar Herrero, Irene|||0000-0003-2743-3618
  • Sepulcre Aguilar, Alberto
Nanoclays, nanosilica and viscosity modifying admixtures can be used to tune rheological properties of cement pastes, in order to fulfill the requirements for non-conventional cast-in-place techniques. An experimental study on cement paste rheology was carried out to evaluate their combined effects on fluid cement pastes" properties. A reference paste with cement blended with limestone filler and a low water to binder ratio was designed. A high range water reducing admixture (HRWRA), three types of viscosity modifying admixtures (VMA), and five nanocomponents (nanosilica and four different nanoclays) were added. Flowability, initial rheological properties and structural build-up of cement pastes were assessed with mini-cone slump test and dynamic shear rheometer test (DSR). The synergies between nanoclays, nanosilica and VMAs were evaluated. It was observed that an adequate combination of admixtures and nanoclays reduced the amount of HRWRA required to achieve target flowability, regarding the same components uncombined. The type and amount of VMAs and nanocomponents also produced changes on yield stress, viscosity and structural build-up. Their effect on structural build-up of fresh paste was related to reversible and non-reversible mechanisms, comparing the reduction of spread diameter of fresh samples stirred and left at rest over time measured with the mini-cone., Ministerio de Economía y Competitividad, Ministerio de Ciencia e Innovación
e_Buah Biblioteca Digital Universidad de Alcalá
Publication Artículo científico (JournalArticle)

Influence of nanoclays on flowability and rheology of SCC pastes

  • Varela Recio, Hugo|||0000-0001-8094-6071
  • Barluenga Badiola, Gonzalo|||0000-0002-2996-3412
  • Palomar Herrero, Irene|||0000-0003-2743-3618
SCC rheology is the key factor of fresh performance and its control is required to overcome cast in place issues regarding pumping and formwork lateral pressure that still limits its widespread use. Nanoclays are good candidates to improve rheological properties of cement pastes as yield stress, viscosity and thixotropy, controlling paste flow behavior. However, some interactions between nanoclays and admixtures can limit their efficiency. In this study, a comparative analysis on rheology and flowability of SCC cement pastes blended with limestone filler and 2 % by cement weight of four types of nanoclays, attapulgite, bentonite, and sepiolite in powder form and dispersed in water, is presented. Two water to binder ratios (w/b), 0.35 and 0.45, were considered and a high range water reducing admixture (HRWRA) was used to reach the required flowability. Water adsorption of nanoclays, flowability and rheological properties of SCC cement pastes with nanoclays were evaluated. It was found that HRWRA was less effective on pastes with nanoclays and low w/b, particularly bentonite. Sepiolite showed larger water adsorption and higher enhancing of rheological properties. It was observed that, the relation of nanoclays and HRWRA was decisive to produce flowability on pastes with low w/b. Besides, flowability was deeply affected by w/b, as water saturation of nanoclays increased HRWRA efficiency. All nanoclays modified rheological properties due to its different particles morphology characteristics, however sepiolite showed the largest effects and reached the higher values of yield stress, viscosity and thixotropy ratios used., Ministerio de Economía y Competitividad