Skip to main content

NUEVAS AVANCES DE LA GEOFISICA Y LA INGENIERIA APLICADOS A LA EVALUACION DEL RIESGO SISMICO

CGL2011-23621

•
Funding agency name Ministerio de Ciencia e Innovación
Funding agency acronym MICINN
Program Programa Nacional de Proyectos de Investigación Fundamental
Subprogram Subprograma de Proyectos de Investigación Fundamental no Orientada
Call Proyectos I+D
Call year 2011
State Plan 2008-2011 Plan Nacional de Investigación Científica, Desarrollo e Innovación Tecnológica
Management unit Subdirección General de Proyectos de Investigación
Beneficiary centre UNIVERSITAT POLITECNICA DE CATALUNYA

Resultados relacionados

Resultados totales (Incluyendo duplicados): 14
Encontrada(s) 1 página(s)

UPCommons. Portal del coneixement obert de la UPC
Publication Artículo científico (JournalArticle)

An efficient methodology to estimate probabilistic seismic damage curves

  • Vargas Alzate, Yeudy Felipe|||0000-0001-7049-071X
  • Pujades Beneit, Lluís|||0000-0002-2619-0805
  • Barbat Barbat, Horia Alejandro|||0000-0002-3649-8053
  • Hurtado Gómez, Jorge Eduardo
The incremental dynamic analysis (IDA) is a powerful methodology that can be easily extended for calculating probabilistic seismic damage curves. These curves are metadata to assess the seismic risk of structures. Although this methodology requires a relevant computational effort, it should be the reference to correctly estimate the seismic risk of structures. Nevertheless, it would be of high practical interest to have a simpler methodology, based for instance on the pushover analysis (PA), to obtain similar results to those based on IDA. In this article, PA is used to obtain probabilistic seismic damage curves from the stiffness degradation and the energy of the nonlinear part of the capacity curve. A fully probabilistic methodology is tackled by means of Monte Carlo simulations with the purpose of establishing that the results based on the simplified proposed approach are compatible with those obtained with the IDA. Comparisons between the results of both approaches are included for a low- to midrise reinforced concrete building. The proposed methodology significantly reduces the computational effort when calculating probabilistic seismic damage curves., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publication Artículo científico (JournalArticle)

An alternative approach to consider the effect of seismic directionality, Un enfoque alternativo para tomar en cuenta el efecto de la direccionalidad sísmica

  • Díaz Carrasco, Sergio
  • Pinzón, Luis A.
  • Pujades Beneit, Lluís|||0000-0002-2619-0805
  • Vargas Alzate, Yeudy Felipe|||0000-0001-7049-071X
Recent researches have proven the importance of considering the seismic directionality effect. The performance of buildings subjected to earthquakes depends on its orientation respect to the seismic actions applied. This type of calculation is computed using the nonlinear dynamic analysis (NLDA) and rotating the acceleration horizontal components onto all non-redundant angles, which entails a high computational cost. This paper presents an alternative approach to consider the directionality effect. The method is based on the nonlinear static analysis (NLSA) and on the energy balance between the capacity curves and the response spectra of the rotated seismic actions. This approach was applied to a 4-story steel frame building 3D-model with ground motions records from Mexico City. A high variability in the building performance is observed due to the incidence angle of the seismic action; the proposed method would allow considering this variation in the structural analysis, in an easy way, demanding less calculation time and providing results compatible with those obtained through the NLDA., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publication Artículo científico (JournalArticle)

Urban non-engineered buildings in Merida, Venezuela. Seismic performance and proposals for retrofit and for new construction

  • López Almansa, Francisco|||0000-0002-7359-110X
  • Pujades Beneit, Lluís|||0000-0002-2619-0805
  • Castillo, A.
The seismic risk for an informal settlement in Mérida (“La Milagrosa”) is qualitatively assessed and retrofit strategies are proposed. The buildings in the settlement are thoroughly examined and four prototype buildings are chosen to represent the vast majority of houses in “La Milagrosa”. The structural behavior of these buildings under gravity loads and seismic actions is deeply analyzed; this study shows that the prototype buildings are unsafe for gravity loads, and that the seismic demands largely exceed their capacity. Based on these conclusions, feasible retrofit strategies are proposed, together with draft recommendations for new similar constructions. Earlier quantitative estimative appraisals show that the proposed seismic strengthening measures can be very effective in reducing fatalities and economical losses, and are significantly more cost-efficient than reconstruction-based approaches. These conclusions might be generalized to many non-engineered urban areas in earthquake-prone regions of the developing world., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publication Artículo científico (JournalArticle)

Energy damage index based on capacity and response spectra

  • Díaz Alvarado, Sergio Alberto
  • Pujades Beneit, Lluís|||0000-0002-2619-0805
  • Barbat Barbat, Horia Alejandro|||0000-0002-3649-8053
  • Vargas Alzate, Yeudy Felipe|||0000-0001-7049-071X
  • Hidalgo Leiva, D.A.
Non-linear dynamic analysis and the damage index of Park-Ang have been often used to assess expected seismic damage to a structure. Depending on the size of the structure and the duration of the record, the computational effort in dynamic analyses is usually high. In this research, a new damage index is proposed based on nonlinear static analysis. The damage index is a linear combination of two energy functions: (1) the strain energy associated with the stiffness variation and the ductility of the structure, and (2) the dissipated energy associated with hysteretic cycles. These two energy functions are obtained from the capacity curve of the structure and from the energy balance with the spectral acceleration. To show the ability of the index to represent damage, low-rise steel buildings were studied under the seismic actions that are expected in Mexico City. The results obtained with the new method show good agreement with those calculated by means of dynamic analyses using the Park-Ang damage index. On average, the Park-Ang damage index is well-fitted by the combination of 62% of the strain energy and 38% of the energy dissipated by hysteresis. Moreover, the new damage index can link damage to certain characteristics of seismic actions, such as their intensity and duration. Therefore, the new approach results in a practical, powerful tool for estimating seismic damage in buildings, especially as probabilistic approaches require massive computations., This research was partially funded by the Ministry of Economy and Competitiveness (MINECO) of the Spanish Government and by the European Regional Development Fund (ERDF) of the European Union (EU) through projects referenced as: CGL2011-23621 and CGL2015-65913-P (MINECO/FEDER, UE). The first author holds PhD fellowships from the Universidad Juarez Autonoma de Tabasco (UJAT) and from the ‘Programa de Mejoramiento del Profesorado, Mexico (PROMEP)’., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publication Artículo científico (JournalArticle)

Sensitivity analysis of seismic parameters in the Probabilistic Seismic Hazard Assessment (PSHA) for Barcelona applying the new R-CRISIS

  • Aguilar Meléndez, Armando
  • Ordaz Schroeder, Mario Gustavo
  • Puente, Josep de la
  • Pujades Beneit, Lluís|||0000-0002-2619-0805
  • Barbat Barbat, Horia Alejandro|||0000-0002-3649-8053
  • Rodriguez Lozoya, H.E.
  • Monterrubio Velasco, Marisol|||0000-0003-0790-1832
  • Escalante Martínez, Jesús E.
  • Campos Ríos, Amelia
One of the most common ways to represent results of the probabilistic seismic hazard assessments (PSHA) are maps of seismic hazard, which usually show values of Peak Ground Acceleration (PGA) in a region for a return period. A common return period is of 475 years. These types of maps are frequently incorporated in seismic codes, which include the minimum requirements to design new buildings. On the other hand, a sensitivity analysis usually gives us additional information about a procedure or result. For instance, a sensitivity analysis about a PSHA can give us information about what variables considered to compute the seismic hazard have a significant influence on the results of seismic hazard. In the present study, we performed a sensitivity analysis related to the PSHA for Barcelona. This analysis was oriented to identify the influence in the results of seismic hazard of the following variables: a) the relationship magnitude-macroseismic intensity chosen to convert values of macroseismic intensity to magnitudes; b) the beta parameter that was used to define part of the seismicity of a seismic source and; c) the ground motion prediction equation (GMPE) which was used to determine intensities values to different distances from the epicenter of earthquakes. For this purpose, we applied the code R-CRISIS, which is the updated version of CRISIS2015. Therefore, the present study had as an additional objective to test the functionality of the new R-CRISIS from the point of view of users. According to the results of the sensitivity analysis of the PSHA of Barcelona both the GMPE and the relationship magnitude-macroseismic intensity are the two variables that have the greater influence on the results of seismic hazard of the present study. For instance, in some results of seismic hazard for the city of Barcelona the values of PGA (for the same return period) differ between them until 82% depending on if we considered the means values of the PGA values of the GMPE or the mean values plus one standard deviation of the PGA values of the GMPE. Finally, according to our experience in the use of the new R-CRISIS in the present study, we can confirm that it is both a powerful and user-friendly software. R-CRISIS has valuable features, for instance, it allows to consider diverse types of criteria to define the type of seismic source. For example, R-CRISIS allows defining different types of geometries of the seismic sources, and different criteria to define the seismicity of each seismic source. An important feature of R-CRISIS is the fact that it includes a database with numerous GMPE ready to be used to compute seismic hazard. Additionally, R-CRISIS has valuables graphical tools which are very helpful during the following two stages: the assigning data and the analysis of results., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publication Artículo científico (JournalArticle)

A probabilistic approach for seismic risk assessment based on vulnerability functions: application to Barcelona

  • Aguilar Meléndez, Armando
  • Pujades Beneit, Lluís|||0000-0002-2619-0805
  • Barbat Barbat, Horia Alejandro|||0000-0002-3649-8053
  • Ordaz Schroeder, Mario Gustavo
  • Puente, Josep de la
  • Lantada, Nieves|||0000-0002-9974-6915
  • Rodriguez Lozoya, H.E.
The final publication is available at Springer via http://dx.doi.org/10.1007/s10518-018-0516-4, Risk assessment and management is an important step towards resilient and sustainable cities. Among many other perils, both natural and manmade, seismic risk is a major threat for resilience and sustainability. In recent decades, several methods for seismic risk assessment have been proposed, including the well-known Vulnerability Index Method (VIM). In this study, a probabilistic version of the VIM, which we call the Vulnerability Index Method-Probabilistic (VIM_P), is proposed. The VIM_P requires essential information on the seismic hazard and on the vulnerability of the building stock. Seismic hazard is determined using the exceedance rates of macroseismic intensities, as defined in the European Macroseismic Scale (EMS). Seismic vulnerability is defined by means of vulnerability probability density functions (pdf) that describe the probability distribution of the corresponding vulnerability index. Beta-like functions are used for these pdfs. VIM_P quantifies seismic vulnerability by means of three vulnerability curves, Lower, Best and Upper, according to the quantity and quality of available information, thus allowing three estimates of seismic vulnerability and risk. Then, seismic risk is computed via the convolution of seismic hazard and seismic vulnerability, considering semi-empirical damage functions. Seismic risk is given through the exceedance frequencies of the damage grades. To highlight the capabilities of the VIM_P, the seismic risk of about 70,000 residential buildings in Barcelona was assessed. According to the results, the exceedance frequency of the collapse damage state for more than the 50% of the buildings in the Eixample district would be greater than 1 × 10-5. This confirms the relatively high seismic risk in the city, mainly due to the high vulnerability of the built environment. Specific software, USERISK20015, has been developed for routine applications of VIM_P. It is hoped that VIM_P and this new tool for seismic risk assessment will be useful to stakeholders and civil protection authorities for risk management and prioritizing actions that can help to create more resilient, sustainable cities., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publication Artículo científico (JournalArticle)

GPR spectra for monitoring asphalt pavements

  • Pedret Rodés, Josep
  • Martínez Reguero, Adriana Haydée|||0000-0002-3709-0463
  • Pérez Gracia, María de la Vega|||0000-0003-3638-3093
Ground Penetrating Radar (GPR) is a prospecting method frequently used in monitoring asphalt pavements, especially as an optimal complement to the defection test that is commonly used for determining the structural condition of the pavements. Its application is supported by studies that demonstrate the existence of a relationship between the parameters determined in GPR data (usually travel time and wave amplitude) and the preservation conditions of the structure. However, the analysis of frequencies is rarely applied in pavement assessment. Nevertheless, spectral analysis is widespread in other fields such as medicine or dynamic analysis, being one the most common analytical methods in wave processing through use of the Fourier transform. Nevertheless, spectral analysis has not been thoroughly applied and evaluated in GPR surveys, specifically in the field of pavement structures. This work is focused on analyzing the behavior of the GPR data spectra as a consequence of different problems affecting the pavement. The study focuses on the determination of areas with failures in bituminous pavement structures. Results epitomize the sensitivity of frequencies to the materials and, in some cases, to the damage., This research has been partially funded by the Spanish Ministry of Economy and Competitiveness (MINECO) of the Spanish Government and by the European Regional Development Fund (FEDER) of the European Union (UE) through projects referenced as CGL2011-23621 and CGL2015-65913-P (MINECO/FEDER, UE). The study is also a contribution to the EU Action COST TU1208 “Civil Engineering Applications of Ground Penetrating Radar” financed by the European Union., Peer Reviewed
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

Sensitivity analysis of seismic parameters in the Probabilistic Seismic Hazard Assessment (PSHA) for Barcelona applying the new R-CRISIS

  • Aguilar Meléndez, Armando
  • Ordaz Schroeder, Mario Gustavo
  • Puente, Josep de la
  • Pujades Beneit, Lluís
  • Barbat Barbat, Horia Alejandro
  • Rodriguez Lozoya, H.E.
  • Monterrubio Velasco, Marisol
  • Escalante Martínez, Jesús E.
  • Campos Ríos, Amelia
One of the most common ways to represent results of the probabilistic seismic hazard assessments (PSHA) are maps of seismic hazard, which usually show values of Peak Ground Acceleration (PGA) in a region for a return period. A common return period is of 475 years. These types of maps are frequently incorporated in seismic codes, which include the minimum requirements to design new buildings. On the other hand, a sensitivity analysis usually gives us additional information about a procedure or result. For instance, a sensitivity analysis about a PSHA can give us information about what variables considered to compute the seismic hazard have a significant influence on the results of seismic hazard. In the present study, we performed a sensitivity analysis related to the PSHA for Barcelona. This analysis was oriented to identify the influence in the results of seismic hazard of the following variables: a) the relationship magnitude-macroseismic intensity chosen to convert values of macroseismic intensity to magnitudes; b) the beta parameter that was used to define part of the seismicity of a seismic source and; c) the ground motion prediction equation (GMPE) which was used to determine intensities values to different distances from the epicenter of earthquakes. For this purpose, we applied the code R-CRISIS, which is the updated version of CRISIS2015. Therefore, the present study had as an additional objective to test the functionality of the new R-CRISIS from the point of view of users. According to the results of the sensitivity analysis of the PSHA of Barcelona both the GMPE and the relationship magnitude-macroseismic intensity are the two variables that have the greater influence on the results of seismic hazard of the present study. For instance, in some results of seismic hazard for the city of Barcelona the values of PGA (for the same return period) differ between them until 82% depending on if we considered the means values of the PGA values of the GMPE or the mean values plus one standard deviation of the PGA values of the GMPE. Finally, according to our experience in the use of the new R-CRISIS in the present study, we can confirm that it is both a powerful and user-friendly software. R-CRISIS has valuable features, for instance, it allows to consider diverse types of criteria to define the type of seismic source. For example, R-CRISIS allows defining different types of geometries of the seismic sources, and different criteria to define the seismicity of each seismic source. An important feature of R-CRISIS is the fact that it includes a database with numerous GMPE ready to be used to compute seismic hazard. Additionally, R-CRISIS has valuables graphical tools which are very helpful during the following two stages: the assigning data and the analysis of results., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

Urban non-engineered buildings in Merida, Venezuela. Seismic performance and proposals for retrofit and for new construction

  • López Almansa, Francisco
  • Pujades Beneit, Lluís
  • Castillo, A.
The seismic risk for an informal settlement in Mérida (“La Milagrosa”) is qualitatively assessed and retrofit strategies are proposed. The buildings in the settlement are thoroughly examined and four prototype buildings are chosen to represent the vast majority of houses in “La Milagrosa”. The structural behavior of these buildings under gravity loads and seismic actions is deeply analyzed; this study shows that the prototype buildings are unsafe for gravity loads, and that the seismic demands largely exceed their capacity. Based on these conclusions, feasible retrofit strategies are proposed, together with draft recommendations for new similar constructions. Earlier quantitative estimative appraisals show that the proposed seismic strengthening measures can be very effective in reducing fatalities and economical losses, and are significantly more cost-efficient than reconstruction-based approaches. These conclusions might be generalized to many non-engineered urban areas in earthquake-prone regions of the developing world., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

GPR spectra for monitoring asphalt pavements

  • Pedret Rodés, Josep
  • Martínez Reguero, Adriana Haydée
  • Pérez Gracia, María de la Vega
Ground Penetrating Radar (GPR) is a prospecting method frequently used in monitoring asphalt pavements, especially as an optimal complement to the defection test that is commonly used for determining the structural condition of the pavements. Its application is supported by studies that demonstrate the existence of a relationship between the parameters determined in GPR data (usually travel time and wave amplitude) and the preservation conditions of the structure. However, the analysis of frequencies is rarely applied in pavement assessment. Nevertheless, spectral analysis is widespread in other fields such as medicine or dynamic analysis, being one the most common analytical methods in wave processing through use of the Fourier transform. Nevertheless, spectral analysis has not been thoroughly applied and evaluated in GPR surveys, specifically in the field of pavement structures. This work is focused on analyzing the behavior of the GPR data spectra as a consequence of different problems affecting the pavement. The study focuses on the determination of areas with failures in bituminous pavement structures. Results epitomize the sensitivity of frequencies to the materials and, in some cases, to the damage., This research has been partially funded by the Spanish Ministry of Economy and Competitiveness (MINECO) of the Spanish Government and by the European Regional Development Fund (FEDER) of the European Union (UE) through projects referenced as CGL2011-23621 and CGL2015-65913-P (MINECO/FEDER, UE). The study is also a contribution to the EU Action COST TU1208 “Civil Engineering Applications of Ground Penetrating Radar” financed by the European Union., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

An efficient methodology to estimate probabilistic seismic damage curves

  • Vargas Alzate, Yeudy Felipe
  • Pujades Beneit, Lluís
  • Barbat Barbat, Horia Alejandro
  • Hurtado Gómez, Jorge Eduardo
The incremental dynamic analysis (IDA) is a powerful methodology that can be easily extended for calculating probabilistic seismic damage curves. These curves are metadata to assess the seismic risk of structures. Although this methodology requires a relevant computational effort, it should be the reference to correctly estimate the seismic risk of structures. Nevertheless, it would be of high practical interest to have a simpler methodology, based for instance on the pushover analysis (PA), to obtain similar results to those based on IDA. In this article, PA is used to obtain probabilistic seismic damage curves from the stiffness degradation and the energy of the nonlinear part of the capacity curve. A fully probabilistic methodology is tackled by means of Monte Carlo simulations with the purpose of establishing that the results based on the simplified proposed approach are compatible with those obtained with the IDA. Comparisons between the results of both approaches are included for a low- to midrise reinforced concrete building. The proposed methodology significantly reduces the computational effort when calculating probabilistic seismic damage curves., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

An alternative approach to consider the effect of seismic directionality, Un enfoque alternativo para tomar en cuenta el efecto de la direccionalidad sísmica

  • Díaz Carrasco, Sergio
  • Pinzón, Luis A.
  • Pujades Beneit, Lluís
  • Vargas Alzate, Yeudy Felipe
Recent researches have proven the importance of considering the seismic directionality effect. The performance of buildings subjected to earthquakes depends on its orientation respect to the seismic actions applied. This type of calculation is computed using the nonlinear dynamic analysis (NLDA) and rotating the acceleration horizontal components onto all non-redundant angles, which entails a high computational cost. This paper presents an alternative approach to consider the directionality effect. The method is based on the nonlinear static analysis (NLSA) and on the energy balance between the capacity curves and the response spectra of the rotated seismic actions. This approach was applied to a 4-story steel frame building 3D-model with ground motions records from Mexico City. A high variability in the building performance is observed due to the incidence angle of the seismic action; the proposed method would allow considering this variation in the structural analysis, in an easy way, demanding less calculation time and providing results compatible with those obtained through the NLDA., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

A probabilistic approach for seismic risk assessment based on vulnerability functions: application to Barcelona

  • Aguilar Meléndez, Armando
  • Pujades Beneit, Lluís
  • Barbat Barbat, Horia Alejandro
  • Ordaz Schroeder, Mario Gustavo
  • Puente, Josep de la
  • Lantada, Nieves
  • Rodriguez Lozoya, H.E.
The final publication is available at Springer via http://dx.doi.org/10.1007/s10518-018-0516-4, Risk assessment and management is an important step towards resilient and sustainable cities. Among many other perils, both natural and manmade, seismic risk is a major threat for resilience and sustainability. In recent decades, several methods for seismic risk assessment have been proposed, including the well-known Vulnerability Index Method (VIM). In this study, a probabilistic version of the VIM, which we call the Vulnerability Index Method-Probabilistic (VIM_P), is proposed. The VIM_P requires essential information on the seismic hazard and on the vulnerability of the building stock. Seismic hazard is determined using the exceedance rates of macroseismic intensities, as defined in the European Macroseismic Scale (EMS). Seismic vulnerability is defined by means of vulnerability probability density functions (pdf) that describe the probability distribution of the corresponding vulnerability index. Beta-like functions are used for these pdfs. VIM_P quantifies seismic vulnerability by means of three vulnerability curves, Lower, Best and Upper, according to the quantity and quality of available information, thus allowing three estimates of seismic vulnerability and risk. Then, seismic risk is computed via the convolution of seismic hazard and seismic vulnerability, considering semi-empirical damage functions. Seismic risk is given through the exceedance frequencies of the damage grades. To highlight the capabilities of the VIM_P, the seismic risk of about 70,000 residential buildings in Barcelona was assessed. According to the results, the exceedance frequency of the collapse damage state for more than the 50% of the buildings in the Eixample district would be greater than 1 × 10-5. This confirms the relatively high seismic risk in the city, mainly due to the high vulnerability of the built environment. Specific software, USERISK20015, has been developed for routine applications of VIM_P. It is hoped that VIM_P and this new tool for seismic risk assessment will be useful to stakeholders and civil protection authorities for risk management and prioritizing actions that can help to create more resilient, sustainable cities., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

Energy damage index based on capacity and response spectra

  • Díaz Alvarado, Sergio Alberto
  • Pujades Beneit, Lluís
  • Barbat Barbat, Horia Alejandro
  • Vargas Alzate, Yeudy Felipe
  • Hidalgo Leiva, D.A.
Non-linear dynamic analysis and the damage index of Park-Ang have been often used to assess expected seismic damage to a structure. Depending on the size of the structure and the duration of the record, the computational effort in dynamic analyses is usually high. In this research, a new damage index is proposed based on nonlinear static analysis. The damage index is a linear combination of two energy functions: (1) the strain energy associated with the stiffness variation and the ductility of the structure, and (2) the dissipated energy associated with hysteretic cycles. These two energy functions are obtained from the capacity curve of the structure and from the energy balance with the spectral acceleration. To show the ability of the index to represent damage, low-rise steel buildings were studied under the seismic actions that are expected in Mexico City. The results obtained with the new method show good agreement with those calculated by means of dynamic analyses using the Park-Ang damage index. On average, the Park-Ang damage index is well-fitted by the combination of 62% of the strain energy and 38% of the energy dissipated by hysteresis. Moreover, the new damage index can link damage to certain characteristics of seismic actions, such as their intensity and duration. Therefore, the new approach results in a practical, powerful tool for estimating seismic damage in buildings, especially as probabilistic approaches require massive computations., This research was partially funded by the Ministry of Economy and Competitiveness (MINECO) of the Spanish Government and by the European Regional Development Fund (ERDF) of the European Union (EU) through projects referenced as: CGL2011-23621 and CGL2015-65913-P (MINECO/FEDER, UE). The first author holds PhD fellowships from the Universidad Juarez Autonoma de Tabasco (UJAT) and from the ‘Programa de Mejoramiento del Profesorado, Mexico (PROMEP)’., Peer Reviewed, Postprint (author's final draft)