Skip to main content

Resultados relacionados

Resultados totales (Incluyendo duplicados): 17
Encontrada(s) 1 página(s)

DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Inversion tectonics and magnetic fabrics in Mesozoic basins of the Western Tethys: a review

  • García-Lasanta, C.
  • Oliva-Urcia, Belén
  • Casas-Sainz, Antonio M.
  • Román-Berdiel, T.
  • Izquierdo Llavall, Esther
  • Soto, Ruth
  • Calvín, P.
  • Moussaid, B.
  • El-Ouardi, Hmidou
  • Kulberg, José Carlos
  • Villalaín, Juan J.
[EN] Positive tectonic inversion of sedimentary basins has been recognized as one of the primary mechanisms of mountain building and intraplate deformation. Reconstructing the tectonic history of basins is relatively easy for the inversion stage but becomes more difficult for the basinal stage, especially when strong deformation involving cleavage development is associated with the subsequent compressional tectonics. Since tectonic markers for the extensional episodes are not commonly well developed, Anisotropy of Magnetic Susceptibility (AMS) has provided recently a tool for analyzing early stages in the evolution of sedimentary basins, even in the absence of other outcrop-scale mesostructures. Here, we expose and discuss the applicability of magnetic fabrics (by means of AMS) to different types of intra-plate sedimentary basins in the Western Tethys region formed under extensional or transtensional regimes and which underwent different inversion styles (total or partial inversion, with or without cleavage development, forming part of compressional thrust sheets, etc.) owing to specific particular p-T conditions and structural controls. Factors such as lithology, magnetic mineralogy, position within the sedimentary pile and deformation intensity are key to interpret the obtained magnetic fabrics in terms of tectonic evolution. A basin classification is proposed according to inversion styles and magnetic fabrics: Where inversion did not involve cleavage development, magnetic lineation is parallel to the stretching direction corresponding to the extensional stage. The transition between non-cleaved to inversion-related cleaved units is marked by the switch of magnetic lineations from parallel to extension to parallel to the intersection lineation between cleavage and bedding. These relationships are enhanced when extension and compression are roughly coaxial, then favoring the clustering of axes of the magnetic ellipsoid. Even when extreme inversion occurs and the early, extensional fabric is obliterated, magnetic fabrics provide information about the interaction between preferred deformation directions associated with the main stages in basin evolution., This study has been financed by the research projects CGL2009-08969, CGL2016-77560-C2-1-P and CGL2016-77560-C2-2-P of the MICINN (Ministry of Science, Innovation and Universities, Spain)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Triassic stretching directions in Iberia and North Africa inferred from magnetic fabrics

  • Soto, Ruth
  • Casas-Sainz, Antonio M.
  • Oliva-Urcia, Belén
  • García-Lasanta, C.
  • Izquierdo Llavall, Esther
  • Moussaid, B.
  • Kullberg, J. C
  • Román-Berdiel, T.
  • Sánchez Moya, Yolanda
  • Sopeña, Alfonso
  • Torres-López, S.
  • Villalaín, Juan J.
  • El-Ouardi, Hmidou
  • Gil Peña, Inmaculada
  • Hirt, A. M.
[EN] During the Triassic, Iberia and western North Africa displayed a unique situation in relation with the Central and North Atlantic opening and westward expansion of the Tethys. Unravelling the stretching direction in Triassic deposits of the studied area can help in our understanding of this scenario. The tectonic setting is characterized by localized basins with strong thickness variations greatly influenced by previous post-Variscan mechanical discontinuities. In this work, we revise and compile magnetic fabric data from eight Triassic depocentres in terms of defining the stretching direction (i.e. magnetic lineation), resulting from extensional deformation of this period. Data show the importance of the opening of the Atlantic rift as the leading process during the Triassic. Dextral transtension can explain the deflection of the extensional direction observed in most studied depocentres that is caused by the activity of previous major oblique faults., Funding came from projects CGL2016-77560-C2-1-P and CGL2016-77560-C2-2-P (Spanish Ministry) and the GeoAp Research Group (E01_17R; Aragón Government)., Peer reviewed
Repositorio Institucional de la Universidad de Burgos (RIUBU)
Publication Artículo científico (JournalArticle)

Magnetic fabric and archaeomagnetic analyses of anthropogenic ash horizons in a cave sediment succession (Crvena Stijena site, Montenegro)

  • Bradák, Balázs
  • Carrancho Alonso, Ángel
  • Herrejón Lagunilla, Ángela
  • Villalaín Santamaria, Juan José
  • Monnier, Gilliane F.
  • Tostevin, Gilbert
  • Mallol, Carolina
  • Pajović, Goran
  • Baković, Mile
  • Borovinić, Nikola
An archaeomagnetic, rock magnetic and magnetic fabric study has been carried out on seven anthropogenic ash horizons in theMiddle Palaeolithic sedimentary level XXIV at the rock shelter of Crvena Stijena (‘Red Rock’), Montenegro. The study has multiple goals, including the identification of iron bearingminerals formed during combustion, assessment of the suitability of these combustion features for recording the Earth´s magnetic field direction, revelation of the magnetic fabric and its significance in the characterization of cave (rock shelter) burnt facies, and identification of post-burning alteration processes. Magnetite has been identified as themain ferromagnetic component of the ash. The ash layers exhibit a high thermomagnetic reversibility in contrast to the irreversible behaviour of their subjacent burnt black layers which is related to the different temperatures attained. Seven mean archaeomagnetic directions were obtained with acceptable statistical values indicating that these features recorded the field direction at the time of burning. However, some of them are out of the expected range of secular variation for mid-latitude regions suggesting post-burning alterations. The magnetic fabric of the ash was characterized by anisotropy of low field magnetic susceptibility measurements. Statistical analysis (box and whisker plot) of the basic anisotropy parameters, such as foliation, lineation, degree of anisotropy and the shape parameter, along with the alignment of the principal susceptibilities on stereoplots, revealed variation among the ash units. The diverse, oblate to prolate, lineated or strongly foliated, quasi-horizontally and vertically oriented fabrics of the units may indicate different slope processes, such as orientation by gravity, solifluction, run-off water, quasi-vertical migration of groundwater and post-burning/post-depositional alteration of the fabric by rockfall impact. In sum, the magnetic characterization of the ash layers has shown the occurrence of different post-burning alteration processes previously not identified at the site. Alteration processes in prehistoric combustion features are often identified from macroscopic observations but our study demonstrates that multiple processes can affect them and are usually unnoted because they take place on a microscopic scale. Their identification is critical for a correct chronological and cultural interpretation of a site (e.g. collection of samples for dating, stratigraphic displacement of remains), especially if significant alterations are involved. Magnetic methods are therefore a powerful but underutilized tool in palaeolithic research for the identification and evaluation of taphonomic processes affecting prehistoric fires., BU235P18 (Junta de Castilla y León, Spain) and the European Regional Development Fund(ERDF) and the CGL2016-77560- C2, PID2019-108753GB-C21 and PID2019-105796GB-I00 of the Agencia Estatal de Investigación (AEI/10.13039/501100011033). AHL gives thanks to Junta de Castilla y León (Spain) and European Social Fund for the financial support during her predoctoral period. Micromorphological investigations by CM are funded by ERC Consolidator Grant project ERC-2014-CoG- 648871-PALEOCHAR.
Repositorio Institucional de la Universidad de Burgos (RIUBU)
Publication Artículo científico (JournalArticle)

Analysing non-coaxial folding effects in the Small Circle Intersection method

  • Calvín Ballester, Pablo
  • Pueyo Morer, Emilio L.
  • Ramón Ortiga, Mª José
  • Casas Sainz, Antonio M.
  • Villalaín Santamaria, Juan José
The Small Circle (SC) tools analyse the stereographic tracks (small circles) followed by the palaeomagnetic vectors during folding processes. Working with interfolding and synfolding remagnetizations, the Small Circle Intersection (SCI) method allows finding the best solution of grouping that should correspond with the remagnetization direction. Once this is known, it is possible to determine the magnetization age as well as the degree of bed tilting at this moment. The SC tools are based on some assumptions, among which the coaxiality between the different deformation events is the one addressed in this work (i.e. absence of vertical axis rotations, VARs, or differential horizontal axis rotations, dHARs). This assumption is based on the necessity of knowing the rotation axis for folding after the acquisition of the remagnetization, and SC tools consider the bedding strike as this axis, something that is only accomplished under coaxial folding. In order to explore how non-coaxiality affects the solutions derived from the SC methods, we first (i) identify the variables that control these errors through simple models that only consider two theoretical palaeomagnetic sites, after that it is possible (ii) to derive the mathematical relationships between them. Finally, we (iii) simulate errors derived from the use of SC tools using a population of 30 palaeomagnetic sites recreating different possible scenarios with VARs and dHARs in nature., Research financed by the projects DR3AM- CGL2014-55118 and CGL2016-77560-C2 from the Spanish Ministry of Science (MINECO) and by the Applied Geology (GeoAP-E0117R) and Geotransfer groups of the Government of Aragon, as well as by the project BU235P18 (Junta de Castilla y Leon, Spain) and the European Regional Development Fund (ERD). It has also benefited from the MAGIBER-II network (CGL2017-90632-REDT) funded by the Ministry of Science, Innovation and Universities.
Repositorio Institucional de la Universidad de Burgos (RIUBU)
Publication Artículo científico (JournalArticle)

High-resolution late Middle Pleistocene paleoclimatic record from the Galería Complex, Atapuerca archaeological site, Spain - An environmental magnetic approach

  • Bógalo Román, Mª Felicidad
  • Bradák, Balázs
  • Villalaín Santamaria, Juan José
  • Calvo Rathert, Manuel
  • González Martín, Manuel Iván
  • Heller, F.
  • Ortega Martínez, Ana Isabel
  • Parés Casanova, Josep M.
The Galería Complex is a cave sediment succession at the Atapuerca paleoanthropological site (Burgos, Spain) that offers detailed environmental information about the late Middle Pleistocene, especially the period between marine oxygen isotope stages MIS10 and MIS7. Previous studies have reconstructed the chronology and detailed the environmental development of this key succession. We introduce rock magnetic climate proxies from the sedimentary units of the Galería succession that we correlate with the global climate record as represented by the marine oxygen isotope record. The cave sediment sequence consists of five infilling phases, four of which were sampled at high resolution across a 5 m thick composite profile. We propose a novel goethite climate proxy along with a frequently used ultrafine ferrimagnetic mineral proxy for paleoclimate reconstruction and detailed chronostratigraphic correlation with isotope stages and substages MIS10/MIS10-9, MIS9e-a and MIS8. The proxies reveal new paleoenvironmental information about paleoprecipitation and indicate that MIS9e was a humid (∼650 mm/year maximum annual precipitation) and intense interglacial in northern Spain that declined in steps into the globally weak glacial stage MIS8. MIS8 consisted of drier periods with 430–510 mm/year annual precipitation and at least one humid substage (600 mm/year)., Junta de Castilla y León (Spain) and the European Regional Development Fund (ERDF) (BU235P18) and the research projects CGL2016-77560-C2, CGL2018-093925-B-C31, and CGL2017-89603-R of the Spanish Ministry of Science and Innovation and PID2019-108753 GB-C21 and PID2019-105796 GB-I00 of the Spanish State Research Agency (AEI/10.13039/501100011033) and ERDF funding (European Union). B. Bradák acknowledges financial support from project BU235P18 (Junta de Castilla y León, Spain) and the European Regional Development Fund (ERDF). M. Calvo-Rathert acknowledges funding from the Fulbright Commission and the Spanish Ministry of Science Innovation and Universities (PRX19/00148) for a research stay at University of Hawaii at Manoa.
Repositorio Institucional de la Universidad de Burgos (RIUBU)
Publication Artículo científico (JournalArticle)

Magnetic signature of the 22 June 1932 tsunami deposits (Jalisco, Mexican Pacific coast)

  • Bógalo Román, Mª Felicidad
  • Ramírez‐Herrera, Maria-Teresa
  • Goguitchaichvili, Avto
  • Rey García, Daniel
  • Mohamed Falcón, Kais Jacob
  • Calvo Rathert, Manuel
  • Corona, Néstor
Recent studies have demonstrated that rock-magnetic analysis may provide additional information to distinguish and characterize extreme marine inundation events such as tsunamis. Rock-magnetic proxies reinforce and improve the environmental evidences supplied by other methods, adding some decisive clues for the interpretation of the origin and genesis of the sedimentary deposits. Here we report rock-magnetic, XRD, and SEM microscopy results obtained in the Palo Verde estuary (Colima Pacific coast, Mexico) in order to enhance the tools for identification and reconstruction of two tsunami-induced deposits. The sedimentary sequence includes two sand units, a tsunami deposit (PV1) associated with the 22 June 1932 tsunami and a deeper sandy layer (PV2) related to a possible paleotsunami that occurred around 1300 C.E. Both sandy units are topped by finer grained units. Magnetic properties exhibit a significant correlation with the stratigraphy. High susceptibility (χ) and high saturation isothermal remanence (SIRM) values typical of high concentrations of (titano)magnetite are a distinctive feature of the most recent sandy tsunamigenic unit PV1 and the overlaying soil. The lower sandy tsunamigenic unit PV2 shows significantly lower χ and SIRM values, indicating lower concentration of (titano)magnetite in this unit and the overlaying clayey-silt unit. The latter also shows a higher coercivity component associated with (titano)hematite. Magnetic grain-size differences are also observed between PV1 and PV2 suggesting differences in hydraulic conditions at the time of deposition. The bulk mineralogical composition and sediment texture of these units also support the hypothesis of different provenances for each tsunamigenic unit as inferred from magnetic properties., M. F. Bógalo and M. Calvo-Rathert acknowledge financial support by projects BU0066U16 of the Junta de Castilla y León (Spain) and CGL2016–77560 from Ministerio de Economía y Competitividad (MINECO) both with European Regional Development Fund (ERDF) funding. M. T. Ramírez-Herrera acknowledges financial support by grants PAPPIT-UNAM-IN123609 and SEP-CONACYT-129456, and DGAPA-PASPA-2015. A. Goguitchaichvili acknowledges the partial financial support provided by DGAPA-PAPIIT IN101717 and CONACYT 252149. This work was also partially supported by Spanish projects CGL2015–66681-R and CGL2014–54117-REDT from MINECO and GRC2014/023 from Xunta de Galicia. K. J. Mohamed was funded by ED481C 2014/2 grant of the Xunta de Galicia.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Diachronous folding and cleavage in an intraplate setting (Central High Atlas, Morocco) determined through the study of remagnetizations

  • Calvín, P.
  • Casas-Sainz, A. M.
  • Villalaín, J. J.
  • Moussaid, B.
Remagnetizations are common in intraplate basins. When remagnetizations occur at an intermediate stage between different tectonic processes, they can be used for paleo-geometrical reconstructions and relative dating of different structures. This has a particular interest in geological frameworks where other geological time markers are absent. In order to apply this methodology, it is necessary to calculate the regional remagnetization direction and subsequently to use this reference direction to restore the attitude of the beds at the moment of remagnetization acquisition. In this work, we use this methodology for dating a pervasive cleavage (whose time of formation is controversial) and the associated structures in the Central High Atlas (Morocco). Paleomagnetic directions from 64 sites were used to calculate the remagnetization direction (D = 330.9°, I = 35.1°, A/n = 6.107) which is coincident with the Albian-Cenomanian (ca. 100 M.a.) expected direction for NW Africa. This direction was used to restore the Mesozoic paleo-geometry of beds allowing us to analyze bedding orientation, cleavage and folding relationships between the present day and the Cretaceous geometry. After restoration we conclude that the development of cleavage post-dates remagnetization, being in relation with Cenozoic basin inversion. However, the paleo-geometry shows incipient folds at Cretaceous times, which can be related to an intra-Mesozoic compressional event.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Emplacement and Deformation of Mesozoic Gabbros of the High Atlas (Morocco): Paleomagnetism and Magnetic Fabrics

  • Calvín, P.
  • Ruiz-Martínez, V.C.
  • Villalaín, J.J.
  • Casas-Sainz, A.M.
  • Moussaid, B.
A paleomagnetic and magnetic fabric study is performed in Upper Jurassic gabbros of the central High Atlas (Morocco). These gabbros were emplaced in the core of preexisting structures developed during the extensional stage and linked to basement faults. These structures were reactivated as anticlines during the Cenozoic compressional inversion. Gabbros from 19 out of the 33 sampled sites show a stable characteristic magnetization, carried by magnetite, which has been interpreted as a primary component. This component shows an important dispersion due to postemplacement tectonic movements. The absence of paleoposition markers in these igneous rocks precludes direct restorations. A novel approach analyzing the orientation of the primary magnetization is used here to restore the magmatic bodies and to understand the deformational history recorded by these rocks. Paleomagnetic vectors are distributed along small circles with horizontal axes, indicating horizontal axis rotations of the gabbro bodies. These rotations are higher when the ratio between shales and gabbros in the core of the anticlines increases. Due to the uncertainties inherent to this work (the igneous bodies recording strong rotations), interpretations must be qualitative. The magnetic fabric is carried by ferromagnetic (s.s.) minerals mimicking the magmatic fabric. Anisotropy of magnetic susceptibility (AMS) axes, using the rotation routine inferred from paleomagnetic results, result in more tightly clustered magnetic lineations, which also become horizontal and are considered in terms of magma flow trend during its emplacement: NW-SE (parallel to the general extensional direction) in the western sector and NE-SW (parallel to the main faults) in the easternmost structures.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

pySCu: A new python code for analyzing remagnetizations directions by means of small circle utilities

  • Calvín, Pablo
  • Villalaín, Juan J.
  • Casas-Sainz, Antonio M.
  • Tauxe, Lisa
  • Torres-López, Sara
The Small Circle (SC) methods are founded upon two main starting hypotheses: (i) the analyzed sites were remagnetized contemporarily, acquiring the same paleomagnetic direction. (ii) The deviation of the acquired paleomagnetic signal from its original direction is only due to tilting around the bedding strike and therefore the remagnetization direction must be located on a small circle (SC) whose axis is the strike of bedding and contains the in situ paleomagnetic direction. Therefore, if we analyze several sites (with different bedding strikes) their SCs will intersect in the remagnetization direction. The SC methods have two applications: (1) the Small Circle Intersection (SCI) method is capable of providing adequate approximations to the expected paleomagnetic direction when dealing with synfolding remagnetizations. By comparing the SCI direction with that predicted from an apparent polar wander path, the (re)magnetization can be dated. (2) Once the remagnetization direction is known, the attitude of the beds (at each site) can be restored to the moment of the acquisition of the remagnetization, showing a palinspastic reconstructuion of the structure. Some caveats are necessary under more complex tectonic scenarios, in which SC-based methods can lead to erroneous interpretations. However, the graphical output of the methods tries to avoid ‘black-box’ effects and can minimize misleading interpretations or even help, for example, to identify local or regional vertical axis rotations. In any case, the methods must be used with caution and always considering the knowledge of the tectonic frame. In this paper, some utilities for SCs analysis are automatized by means of a new Python code and a new technique for defining the uncertainty of the solution is proposed. With pySCu the SCs methods can be easily and quickly applied, obtaining firstly a set of text files containing all calculated information and subsequently generating a graphical output on the fly.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Evolution of the Ridges of Midelt-Errachidia Section in the High Atlas Revealed by Paleomagnetic Data

  • Torres-López, S.
  • Casas, A.M.
  • Villalaín, J.J.
  • Moussaid, B.
  • Ruiz Martínez, V.C.
  • El-Ouardi, H.
New paleomagnetic data (43 sites) from Mesozoic sediments are contributed in this work, verifying the presence of a pervasive syntectonic Early Cretaceous remagnetization in the easternmost area of the Moroccan High Atlas. Using the small circle intersection method, we have calculated the characteristic remagnetization direction (Dec: 337.3, Inc: 38.4) that fits with a 100-Ma age, according to the Apparent Polar Wander Path of Africa. The paleomagnetic vectors of remagnetization are used to obtain the geometry during the remagnetization stage (100 Ma) of one of the most renowned geological cross sections of the High Atlas, the Midelt-Errachidia profile. The partial restoration of the cross section at 100 Ma allows us to determine the dips of the beds at the remagnetization stage in five structures (ridges or anticlines). Our results indicate that the five ridges that configure the Midelt-Errachidia profile were initiated to different degrees prior to wholesale compressive deformation during the Cenozoic. This configuration can be explained according to two different scenarios that we discuss in this paper: transpression and diapirism. The geological model obtained, both at present and at 100 Ma, indicates the existence of a Mesozoic cover substantially décolled from the Paleozoic basement, what strongly contrasts with previously published transects of the same area.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Extensional vs. compressional deformation in the Central High Atlas salt province: A paleomagnetic approach

  • Calvín, P.
  • Casas-Sainz, A.M.
  • Villalaín, J.J.
  • Moussaid, B.
In this paper we address the problem of the distinction between diapiric, salt-driven and compressional structures, using the outstanding example of the Central High Atlas (Morocco). A remagnetized component carried by magnetite has been isolated in 32 new paleomagnetic sites. It is characterized by: maximum unblocking temperatures around 450 °C, syn-folding behavior and normal polarity. These 33 mean paleomagnetic directions were analyzed together with other 68 from published works around the study area to construct a robust paleomagnetic dataset along a cross-section perpendicular to the main structures. The remagnetization direction (n: 100, Dec: 332.2°, Inc: 34.5°, ¿: 6.2°, ¿: 2.0°, A/n: 6.427°) and the paleo-dip of beds (the attitude of the beds at the remagnetization occurrence) were calculated through small circle methods. The remagnetization can be dated as ca. 100 Ma. Because of its occurrence between the extensional and compressional periods, this remagnetization offers the possibility of restore the basin to its pre-inversion geometry. Comparison between present-day and pre-inversion structure allows discriminating three different evolutionary patterns: (i) thrusted and welded salt-walls mainly structured during the extensional stage (Ikkou ridge) with steep limbs close to the salt-wall core. (ii) Jurassic salt-walls with weaker deformation, restricted to the areas adjacent to the structure (Tadaghmamt and Timedouine); in this case, Cenozoic compression is limited to welding of the salt-walls and buttressing of the sedimentary sequences against faults. (iii) salt-rollers gently initiated during the Jurassic (Toumliline diapir), thrusted during the Cenozoic compression. Results show the importance of salt tectonics both during extension and compression, as well as the control of the compressional features by the inherited extensional structures. The performed restorations prove that paleomagnetism is a useful, independent tool to obtain palinspastic restorations and to separate, and quantify, the imprint generated during the basinal stage from the inversional features.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Triassic stretching directions in Iberia and North Africa inferred from magnetic fabrics

  • Soto, Ruth
  • Casas-Sainz, Antonio M.
  • Oliva-Urcia, Belén
  • García-Lasanta, Cristina
  • Izquierdo-Llavall, Esther
  • Moussaid, Bennacer
  • Kullberg, José Carlos
  • Román-Berdiel, Teresa
  • Sánchez-Moya, Yolanda
  • Sopeña, Alfonso
  • Torres López, Sara
  • Villalaín, Juan José
  • El-Ouardi, Hamidou
  • Gil-Peña, Inmaculada
  • Hirt, Ann M.
During the Triassic, Iberia and western North Africa displayed a unique situation in relation with the Central and North Atlantic opening and westward expansion of the Tethys. Unravelling the stretching direction in Triassic deposits of the studied area can help in our understanding of this scenario. The tectonic setting is characterized by localized basins with strong thickness variations greatly influenced by previous post-Variscan mechanical discontinuities. In this work, we revise and compile magnetic fabric data from eight Triassic depocentres in terms of defining the stretching direction (i.e. magnetic lineation), resulting from extensional deformation of this period. Data show the importance of the opening of the Atlantic rift as the leading process during the Triassic. Dextral transtension can explain the deflection of the extensional direction observed in most studied depocentres that is caused by the activity of previous major oblique faults.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Analysing non-coaxial folding effects in the Small Circle Intersection method

  • Calvín, P.
  • Pueyo, E.L.
  • Ramón, M.J.
  • Casas-Sainz, A.M.
  • Villalaín, J.J.
The Small Circle (SC) tools analyse the stereographic tracks (small circles) followed by the palaeomagnetic vectors during folding processes. Working with interfolding and synfolding remagnetizations, the Small Circle Intersection (SCI) method allows finding the best solution of grouping that should correspond with the remagnetization direction. Once this is known, it is possible to determine the magnetization age as well as the degree of bed tilting at this moment. The SC tools are based on some assumptions, among which the coaxiality between the different deformation events is the one addressed in this work (i.e. absence of vertical axis rotations, VARs, or differential horizontal axis rotations, dHARs). This assumption is based on the necessity of knowing the rotation axis for folding after the acquisition of the remagnetization, and SC tools consider the bedding strike as this axis, something that is only accomplished under coaxial folding. In order to explore how non-coaxiality affects the solutions derived from the SC methods, we first (i) identify the variables that control these errors through simple models that only consider two theoretical palaeomagnetic sites, after that it is possible (ii) to derive the mathematical relationships between them. Finally, we (iii) simulate errors derived from the use of SC tools using a population of 30 palaeomagnetic sites recreating different possible scenarios with VARs and dHARs in nature.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Remagnetizations used to unravel large-scale fold kinematics: A case study in the Cameros Basin (Northern Spain)

  • García-Lasanta, C.
  • Casas-Sainz, A.
  • Villalaín, J.J.
  • Oliva-Urcia, B.
  • Mochales, T.
  • Speranza, F.
The occurrence of a generalized remagnetization at 100 Ma makes the Cameros Basin, an 8 km thick Cretaceous extensional trough inverted during the Cenozoic, a perfect natural frame to apply paleomagnetic vectors to geometrical reconstructions. The widespread remagnetization that occurred between the extensional and compressional episodes, linked to low-grade metamorphism, provides a tool to reconstruct the attitude of beds at the remagnetization time, thus giving a picture of basin geometry during the Cretaceous. This snapshot is compared with the present-day geometry to constrain the large-scale kinematic evolution of folds between these two stages. According to this methodology, a syncline, preinversion geometry of the sedimentary basin was determined and the position of its main axial surface was accurately located. Comparing with the present-day, postinversion geometry, a northward hinge migration of around 5 km is inferred. This migration is the result of the southward back thrusting in the southern basin border, favored by the detachment level at the base of the Mesozoic cover. Conversely, the main northward directed thrust, which involved both the Paleozoic basement and the Mesozoic cover, did not significantly affect the internal structure of the basin in spite of its overall displacement of more than 20 km.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Origin of oblique structures controlled by pre-tectonic thickness variations in frictional and salt-bearing fold-and-thrust belts: Insights from analogue modelling

  • Santolaria, Pablo
  • Izquierdo-Llavall, Esther
  • Soto, Ruth
  • Román-Berdiel, Teresa
  • Casas-Sainz, Antonio
This work includes, first, a synthesis of experimental analogue modelling programs assessing the influence of along-strike thickness variations in the development of oblique structures in fold-and-thrust belts. As a second part, we present a new experimental program testing, systematically, the influence of tapered décollement-cover thrust wedges. Previous experiments show that frictional, brittle models feature numerous, short-wavelength structures where the cover is thinner. Deformation fronts are totally or locally oblique to the backstop when the cover thinning is progressive or sharp, respectively. Low (<30°) or higher structural obliquities occur when thickness variations are progressive or sharp, respectively. The addition of a basal or intermediate décollement, commonly entails the transference of deformation towards its external pinch-out. Consequently salients occur and transfer zones and oblique structures form over décollement boundaries. Their location and orientation strongly depend on the pre-compressional shape of the décollements. Furthermore, as demonstrated by our modelling results, tapered brittle covers over viscous décollements result in asymmetric thrust wedges formed by structures that end or change their vergence laterally, resulting in obliquities generally <30°. Two natural case studies, showing strong (South Pyrenean Central Salient) or moderately oblique (Keping Shan fold-and-thrust belt) structures are revisited and compared to the described analogue models.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

The carriers of AMS in remagnetized carbonates. Insights for remagnetization mechanism and basin evolution

  • Calvín, P.
  • Villalaín, J.J.
  • Casas-Sainz, A.M.
Magnetic fabrics are usually studied to unravel the evolution of sedimentary basins, mainly focusing the attention in paramagnetic minerals. However, since basins are sometimes affected by burial-related chemical remagnetizations, magnetic fabrics can also be carried by authigenic ferromagnetic minerals related to remagnetization processes. Consequently, the study of the different types of fabrics can give complementary and valuable information about the evolution of sedimentary basins. Here, we explore, in the Jurassic carbonates of the Central High Atlas (Morocco), the role in magnetic fabrics of authigenic magnetite that grew during the Cretaceous (ca. 100 Ma) widespread remagnetization event. Magnetic fabrics are studied in 53 sites using the anisotropy of the magnetic susceptibility measured at room temperature (RT-AMS) and comparing results with sub-fabrics that alternatively enhance the paramagnetic and the ferromagnetic signal. Furthermore, an innovative analysis is proposed, comparing the magnetic fabrics before and after bedding correction (the common procedure) with fabric orientation after partial bedding correction. We use the paleomagnetic information to reconstruct the attitude of bedding at the remagnetization time and to restore the magnetic fabrics at this time. The performed analysis allows interpreting RT-AMS in terms of the contribution of different subfabrics, and the relationship between these, tectonic processes and the magnetic mineralogy. Four RT-AMS types are defined: T1 is carried by superparamagnetic magnetite that grew during the remagnetization stage and shows a horizontal lineation parallel to the extension direction at this time; T3 and T4 are carried by paramagnetic minerals and show compressive fabrics with the magnetic lineation parallel to intersection (bedding-cleavage) lineation; finally, T2 shows a mix between ferrimagnetic and paramagnetic fabrics.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Anisotropic magnetite growth in remagnetized limestones: Tectonic constraints and implications for basin history

  • Calvin, P.
  • Villalain, J. J.
  • Casas-Sainz, A. M.
Magnetic properties of sedimentary rocks have been commonly exploited to determine the tectonic and chemical evolution of sedimentary basins. We here propose the use of the anisotropy of the anhysteretic remanent magnetization (ARM) to infer the orientation of magnetite grains formed during remagnetization stages, and hence to obtain the tectonic regime during the magnetization period, whose age can also be constrained by paleomagnetic methods. The anisotropy of ARM technique is here applied to remagnetized Jurassic limestones from the Central High Atlas (North Africa). These rocks were remagnetized at ca. 100 Ma during the Cretaceous Normal Superchron in an extensional tectonic setting. The magnetic fabric carried by authigenic magnetite (which is also the carrier of the remagnetization) shows a consistent orientation after a partial bedding correction, which precisely corresponds with the attitude of strata at the time of remagnetization. The anisotropy of the ARM tensor shows a well-defined horizontal lineation parallel to the Mesozoic regional extension, and a horizontal magnetic foliation perpendicular to the lithostatic maximum stress axis. Therefore, our results demonstrate that (1) the magnetite grain growth was consistent with the stress conditions and did not follow any preexisting fabric of the rock, and (2) these grains did not rotate during the subsequent compressional events.