Skip to main content

Resultados relacionados

Resultados totales (Incluyendo duplicados): 9
Encontrada(s) 1 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Effect of Salinity on UVA-Vis Light Driven Photo-Fenton Process at Acidic and Circumneutral pH

  • Vallés-Ferrer, Ivan|||0000-0002-6510-3970
  • Santos-Juanes Jordá, Lucas|||0000-0001-5539-8341
  • Amat Payá, Ana María|||0000-0003-4218-2685
  • Arqués Sanz, Antonio|||0000-0001-8692-6979
  • Moreno-Andrés, Javier
[EN] In the present work, the treatment of a mixture of six emerging pollutants (acetamiprid, acetaminophen, caffeine, amoxicillin, clofibric acid and carbamazepine) by means of photo-Fenton process has been studied, using simulated sunlight as an irradiation source. Removal of these pollutants has been investigated in three different aqueous matrices distinguished by the amount of chlorides (distilled water, 1 g L-1 of NaCl and 30 g L-1 of NaCl) at a pH of 2.8 and 5.0. Interestingly, the presence of 1 g L-1 was able to slightly accelerate the pollutants removal at pH = 5, although the reverse was true at pH = 2.8. This is attributed to the pH-dependent interference of chlorides on photo-Fenton process, that is more acute in an acidic medium. As a matter of fact, the fastest reaction was obtained at pH = 3.5, in agreement with literature results. Monitoring of hydrogen peroxide consumption and iron in solution indicates that interference with chlorides is due to changes in the interaction between iron and the peroxide, rather than a scavenging effect of chloride for hydroxyl radicals. Experiments were also carried out with real seawater and showed higher inhibition than in the NaCl experiments, probably due to the effect of different dissolved salts present in natural water., This research was funded by Spanish Ministry of Science, Innovation and Universities, AEI and FEDER for funding under the CalypSol Project (Ref: RTI2018-097997-B-C31) and the cofunding by the 2014-2020 ERDF Operational Programme and by the Department of Economy, Knowledge, Business and University of the Regional Government of Andalusia (Spain). Ref.: FEDER-UCA18-108023. J. Moreno-Andres is grateful to Generalitat Valenciana (Spain) (APOSTD/2019/207) and the financial support from the European Social Fund (ESF).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Enhancement of Iron-Based Photo-Driven Processes by the Presence of Catechol Moieties

  • Moreno-Andrés, Javier
  • García-Negueroles, Paula
  • Vallés-Ferrer, Ivan|||0000-0002-6510-3970
  • Santos-Juanes Jordá, Lucas|||0000-0001-5539-8341
  • Arqués Sanz, Antonio|||0000-0001-8692-6979
[EN] Photo-induced Advanced Oxidation Processes (AOPs) using H2O2 or S2O82- as radical precursors were assessed for the abatement of six different contaminants of emerging concern (CECs). In order to increase the efficiency of these AOPs at a wider pH range, the catechol organic functional compound was studied as a potential assistant in photo-driven iron-based processes. Different salinity regimes were also studied (in terms of Cl- concentration), namely low salt water (1 g center dot L-1) or a salt-water (30 g center dot L-1) matrix. Results obtained revealed that the presence of catechol could efficiently assist the photo-Fenton system and partly promote the photo-induced S2O82- system, which was highly dependent on salinity. Regarding the behavior of individual CECs, the photo-Fenton reaction was able to enhance the degradation of all six CECs, meanwhile the S2O82--based process showed a moderate enhancement for acetaminophen, amoxicillin or clofibric acid. Finally, a response-surface methodology was employed to determine the effect of pH and catechol concentration on the different photo-driven processes. Catechol was removed during the degradation process. According to the results obtained, the presence of catechol in organic macromolecules can bring some advantages in water treatment for either freshwater (wastewater) or seawater (maritime or aquaculture industry)., This research was funded by Spanish Ministry of Science, Innovation and Universities, AEI and FEDER for funding under the CalypSol Project (Ref: RTI2018-097997-B-C31) and the co-funding by the 2014-2020 ERDF Operational Programme and by the Department of Economy, Knowledge, Business and University of the Regional Government of Andalusia (Spain). Ref.: FEDER-UCA18-108023. J. Moreno-Andres is grateful to Generalitat Valenciana (Spain) (APOSTD/2019/207) and the financial support from the European Social Fund (ESF).
RODIN. Repositorio de Objetos de Docencia e Investigación de la Universidad de Cádiz
Publication Artículo científico (JournalArticle)

UV-LEDs combined with persulfate salts as a method to inactivate microalgae in ballast water

  • Rivas Zaballos, Ignacio
  • Romero Martínez, Leonardo
  • Moreno Garrido, Ignacio
  • Moreno Andrés, Javier
  • Acevedo Merino, Asunción
  • Nebot Sanz, Enrique
The Ballast Water Management Convention (BWMC) establishes limits for viable organisms in discharged ballast water. UV-based ballast water management systems (BMWS) are among the most common, especially those with low pressure (LP) and medium pressure (MP) mercury lamps. An interesting alternative to mercury lamps could be UV LEDs that have been developing over recent years. UVA, UVB, and UVC LEDs have been tested as a method to inactivate microalgae in ballast water. For this study, the diatom Phaeodactylum tricornutum was selected as a target organism. Comparing the D2 (dose required to achieve two log reductions) for P. tricornutum from different UV treatments, it was observed that UVC LEDs were 74.2 % more efficient than UVB LEDs and, compared with previous studies, 48.1 % more efficient than UVC LP mercury lamps. If a five day dark post-treatment was combined with the UV irradiation to avoid photoreactivation, UVC LEDs were 90 % more efficient than UVB LEDs and, compared with previous studies, 36.8 % more efficient than UVC LP mercury lamps. No damage with or without photoreactivation was caused by UVA irradiation with doses up to 4·104 mJ cm−2. The combination of peroxymonosulfate (PMS) with UVA, UVB and UVC LEDs did not significantly increase the inactivation, and the combination of the peroxydisulfate (PDS) with UVC LEDs slightly decreases the inactivation compared with UVC irradiation alone. In conclusion, UVC LEDs were the most efficient for inactivating P. tricornutum, and the combination of PMS and PDS with UV LEDs did not notably improve it. © 2022 The Authors
RODIN. Repositorio de Objetos de Docencia e Investigación de la Universidad de Cádiz
Publication Artículo científico (JournalArticle)

On the Efficacy of H2O2 or S2O82- at Promoting the Inactivation of a Consortium of Cyanobacteria and Bacteria in Algae-Laden Water

  • Moreno Andrés, Javier
  • Rivas Zaballos, Ignacio
  • Acevedo Merino, Asunción
  • Nebot Sanz, Enrique
Harmful algal blooms in coastal areas can significantly impact a water source. Microorganisms such as cyanobacteria and associated pathogenic bacteria may endanger an ecosystem and human health by causing significant eco-hazards. This study assesses the efficacy of two different reagents, H2O2 and S2O82-, as (pre-)treatment options for algae-laden waters. Anabaena sp. and Vibrio alginolyticus have been selected as target microorganisms. With the objective of activating H2O2 or S2O82-, additional experiments have been performed with the presence of small amounts of iron (18 mu mol/L). For the cyanobacterial case, H2O2-based processes demonstrate greater efficiency over that of S2O82-, as Anabaena sp. is particularly affected by H2O2, for which >90% of growth inhibition has been achieved with 0.088 mmol/L of H2O2 (at 72 h of exposure). The response of Anabaena sp. as a co-culture with V alginolyticus implies the use of major H2O2 amounts for its inactivation (0.29 mmol/L of H2O2), while the effects of H2O2/Fe(II) suggests an improvement of similar to 60% compared to single H2O2. These H2O2 doses are not sufficient for preventing the regrowth of V alginolyticus after 24 h. The effects of S2O82- (+ Fe(II)) are moderate, reaching maximum inhibition growth of similar to 50% for Anabaena sp. at seven days of exposure. Nevertheless, doses of 3 mmol/L of S2O82- can prevent the regrowth of V alginolyticus. These findings have implications for the mitigation of HABs but also for the associated bacteria that threaten many coastal ecosystems.
RODIN. Repositorio de Objetos de Docencia e Investigación de la Universidad de Cádiz
Publication Artículo científico (JournalArticle)

Evaluation of algaecide effectiveness of five different oxidants applied on harmful phytoplankton

  • Moreno Andrés, Javier
  • Romero Martínez, Leonardo
  • Seoane, Sergio
  • Acevedo Merino, Asunción
  • Moreno Garrido, Ignacio
  • Nebot Sanz, Enrique
Harmful algal blooms (HABs) in coastal areas similarly impact both ecosystems and human health. The translocation of phytoplankton species via maritime transport can potentially promote the growth of HABs in coastal systems. Accordingly, ballast water must be disinfected. The main goal of this study is to assess the effectiveness of different emerging biocides, including H2O2, peracetic acid (PAA), peroxymonosulfate (PMS), and peroxydisulfate (PDS). The effectiveness of these biocides is compared with that of conventional chlorination methods. Their effects on two ichthyotoxic microalgae with worldwide distribution, i.e., Prymnesium parvum and Heterosigma akashiwo, are examined. To ensure the prolonged effectiveness of the different reagents, their concentration–response curves for 14 days are constructed and examined. The results suggest a strong but shorter effect by PMS (EC50 = 0.40–1.99 mg·L-1) and PAA (EC50 = 0.32–2.70 mg·L-1), a maintained effect by H2O2 (EC50 = 6.67–7.08 mg·L-1), and a negligible effect by PDS. H. akashiwo indicates higher resistance than P. parvum, except when H2O2 is used. Based on the growth inhibition performance and consumption of the reagents as well as a review of important aspects regarding their application, using H2O2, PAA, or PMS can be a feasible alternative to chlorine-based reagents for inhibiting the growth of harmful phytoplankton.
RODIN. Repositorio de Objetos de Docencia e Investigación de la Universidad de Cádiz
Publication Artículo científico (JournalArticle)

Disinfection enhancement of single ozonation by combination with peroxymonosulfate salt

  • Moreno Andrés, Javier
  • Morillo-Ponce, Juan
  • Ibáñez López, María Eugenia
  • Acevedo Merino, Asunción
  • García Morales, José Luis
Controlling pathogens and undesired biofouling in aquaculture or shipping activities is important due to the related potential economic and public health impacts. Accordingly, the treatment of seawater has increased interest in the maritime industry. Advanced Oxidation Processes are promising techniques for the treatment of different aqueous matrices. In this context, sulfate radical-based AOPs appear to be a good alternative for seawater applications. Consequently, the goal of this study is to evaluate the disinfection efficacy of combining the peroxymonosulfate salt ([PMS] = 1 and 5 mg L−1) with an ozonation treatment. Different inactivation processes (O3, PMS, and O3/PMS) have been investigated with Vibrio alginolyticus as a target microorganism. In comparison with single ozonation, kinetic rates have been accelerated by 65 % and 123 % with the addition of 1 and 5 mg L−1 of PMS, respectively. It results in a synergistic effect for the O3/PMS combination. The transferred ozone dose is also notably reduced for reaching the 4 Log-removal value (O3: 1.53 mg O3 ·L−1; O3/PMS: 0.87 mg O3 ·L−1 (1 mg PMS·L−1), and 0.59 mg O3 ·L−1 (5 mg PMS·L−1)). O3/PMS treatment also presents a greater residual effect and higher acute toxicity of the treated effluent. Results obtained suggest the peroxymonosulfate as a good promoter of disinfection in the presence of O3, not only by increasing the inactivation rate but also in minimizing bacterial regrowth, which implies greater cell damage during treatment processes. Thus, the O3/HSO5- process deserves further research as an alternative to traditional techniques for water treatment.
RODIN. Repositorio de Objetos de Docencia e Investigación de la Universidad de Cádiz
Publication Artículo científico (JournalArticle)

A comparison of photolytic, photochemical and photocatalytic processes for disinfection of recirculation aquaculture systems (RAS) streams

  • Moreno Andrés, Javier
  • Rueda-Márquez, Juan José
  • Homola, Tomas
  • Vielma, Jouni
  • Moriñigo, Miguel Ángel
  • Mikola, Anna
  • Sillanpaa, Mika
  • Acevedo Merino, Asunción
  • Nebot Sanz, Enrique
  • Levchuk, Irina
The development of technologically advanced recirculation aquaculture systems (RAS) implies the reuse of water in a high recirculation rate (>90%). One of the most important phases for water management in RAS involves water disinfection in order to avoid proliferation of potential pathogens and related fish diseases. Accordingly, different approaches have been assessed in this study by performing a comparison of photolytic (UV-LEDs) at different wavelengths (λ = 262, 268 and 262 + 268 nm), photochemical (UV-LEDs/H2O2, UV-LEDs/HSO5− and UV-LEDs/S2O82−) and photocatalytic (TiO2/SiO2/UV-LEDs and ZnO/SiO2/UV-LEDs) processes for the disinfection of water in RAS streams. Different laboratory tests were performed in batch scale with real RAS stream water and naturally occurring bacteria (Aeromonas hydrophyla and Citrobacter gillenii) as target microorganisms. Regarding photolytic processes, higher inactivation rates were obtained by combining λ262+268 in front of single wavelengths. Photochemical processes showed higher efficiencies by comparison with a single UV-C process, especially at 10 mg L−1 of initial oxidant dose. The inactivation kinetic rate constant was improved in the range of 15–38%, with major efficiency for UV/H2O2 ∼ UV/HSO5− > UV/S2O82−. According to photocatalytic tests, higher efficiencies were obtained by improving the inactivation kinetic rate constant up to 55% in comparison with a single UV-C process. Preliminary cost estimation was conducted for all tested disinfection methods. Those results suggest the potential application of UV-LEDs as promoter of different photochemical and photocatalytic processes, which are able to enhance disinfection in particular cases, such as the aquaculture industry.
RODIN. Repositorio de Objetos de Docencia e Investigación de la Universidad de Cádiz
Publication Artículo científico (JournalArticle)

Improving the microalgae inactivating efficacy of ultraviolet ballast water treatment in combination with hydrogen peroxide or peroxymonosulfate salt

  • Romero Martínez, Leonardo
  • Rivas Zaballos, Ignacio
  • Moreno Andrés, Javier
  • Moreno-Garrido, Ignacio
  • Acevedo Merino, Asunción
  • Nebot Sanz, Enrique
Due to the increasing number of ecosystem invasions with the introduction of exogenous species via ballast water, the International Maritime Organization adopted the Ballast Water Convention (BWMC). The BWMC establishes standards for the concentration of viable organisms in a ballast water discharge. Ultraviolet (UV) irradiation is commonly used for treating ballast water; however, regrowth after UV irradiation and other drawbacks have been reported. In this study, improvement in UV treatment with the addition of hydrogen peroxide or peroxymonosulfate salt was investigated using the microalgae Tetraselmis suecica as the target organism. Results reported that each of these reagents added in a concentration of 10 ppm reduced the concentration of initial cells by more than 96%, increased the UV inactivation rate, and enabled reaching greater level of inactivation with the treatment. These improvements imply a reduction of the UV doses required for a consistent compliance with the BWMC standards.
RODIN. Repositorio de Objetos de Docencia e Investigación de la Universidad de Cádiz
Publication Artículo científico (JournalArticle)

Development of a geometrical model for the determination of the average intensity in a flow-through UV-LED reactor and validation with biodosimetry and actinometry

  • Romero Martínez, Leonardo
  • Moreno Andrés, Javier
  • Acevedo Merino, Asunción
  • Nebot Sanz, Enrique
Ultraviolet (UV) treatment is widely used for water disinfection. The recent development and improvement of the light emitting diodes (LEDs) in the UVC range makes them an alternative to the traditional mercury vapor UV lamps in the middle or long term. Determining the UV intensity applied by a reactor is essential for evaluating its efficacy. Although doing so is relatively straightforward in simple laboratory reactors, such as a collimated beam reactor (CBR), its calculation for more complex devices, such as a flow-through reactor (FTR), requires indirect approaches. The objective in this study is determining the UV intensity in FTRs equipped with UV-C LEDs by utilizing indirect approaches such as the geometrical modeling of the intensity distribution, chemical actinom-etry, and biodosimetry using a CBR as a reference. With this method, the inactivation of four bacterial indicators in both the CBR and FTR have also been addressed. The three approaches that were used reported similar values of mean intensity with an average value of 0.86 mW cm-2. Determining the mean intensity enabled calculating the UV doses that were applied to the target water and then determining the inactivation kinetics parameters. The UV dose that was necessary to achieve four-log reductions from the initial bacterial concentration ranged from 5.8 to 17.5 mJ cm-2 depending on the target species. Additionally, the geometrical model developed in this study introduces new possibilities into the optimization of the reactor design.