Skip to main content

Resultados relacionados

Resultados totales (Incluyendo duplicados): 4
Encontrada(s) 1 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Repetitive corrugation and straightening effect on the microstructure, crystallographic texture and electrochemical behavior for the Al-7075 alloy

  • Romero-Resendiz, L.
  • Hernández, M.
  • Cabrera, J.M.
  • Elizalde, S.
  • Figueroa, I.A.
  • Covelo, A.
  • González, G.
  • Amigó, Vicente|||0000-0002-2107-0273
[EN] Anti-corrosion susceptibility is one of the top criteria for selecting metallic materials for several industrial applications. This work studies the corrosion performance of an Al-7075 alloy obtained by repetitive corrugation and straightening (RCS). This processing method generated a microstructure formed by randomly distributed micro-, submicro-, and nano- metric grain sizes. The samples exhibited a drop in corrosion resistance for a longer duration in the electrolyte and higher deformation. However, the samples processed by RCS showed better electrochemical stability than the non-deformed condition. The improved electrochemical stability could be associated with the particular microstructure generated during the RCS process., LRR acknowledges CONACyT for the scholarship 592722. Valuable technical support provided by A. Tejeda-Cruz, O. Novelo-Peralta, E. Hernández-Mecinas, G. A. Lara-Rodríguez, J. Romero-Ibarra, C. Flores-Morales and A. Bobadilla-Valencia is also acknowledged. The authors acknowledge the funding support from UNAMDGAPA-PAPIIT- through project IN102321.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Mechanical, stress corrosion cracking and crystallographic study on flat components processed by two combined severe plastic deformation techniques

  • Romero-Resendiz, L.
  • Cabrera, J.M.
  • Elizalde, S.
  • Figueroa, I.A.
  • González, G.
  • Amigó, Vicente|||0000-0002-2107-0273
[EN] Although the current field of application of Alealloy 7075 (AA7075) is vast, it is still limited due to some drawbacks, especially due to its susceptibility to stress corrosion cracking (SCC). This work aims to evaluate the microstructural, mechanical, and stress corrosion cracking (SCC) behaviors on an AA7075 in flat format deformed by a combination of repetitive corrugation and straightening (RCS) and accumulative roll bonding (ARB) techniques. Four different deformation routes were applied, namely: ARB (A), RCS (R), RCS þ ARB (RA) and ARB þ RCS (AR). As expected, the efficiency for grain refinement depends on the applied route, in terms of average grain size regarding the initial condition IC): AR > A > RA > R. All conditions resulted in unimodal and widened grain size distributions of micro-, submicro- and nano-metric dimensions. The study of crystallographic orientations showed that route R did not generate any new texture, whereas different preferred orientations were obtained for routes A, RA, and AR. The hardness and threepoint bending tests showed an improvement of mechanical strength in the following order: AR > RA > A > R. The cracks per cm2 obtained in the corrosion study indicated that the best SCC resistance was R > A > AR > RA. Based on the above, the best combination of microstructural, mechanical, and SCC properties until one deformation pass was obtained by the single route of the ARB process., This work was supported by Programa de Apoyo a Proyectos de Investigación e Innovación Tecnológica (PAPIIT) -UNAM under grant number IN102321.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

The Effect of Ti/Ta Ratio and Processing Routes on the Hardness and Elastic Modulus of Porous TiNbZrTa Alloys

  • González-Guillén, Celia
  • Al-Hawajreh-Kamel, Ghaith
  • Degalez-Duran, Eduardo
  • Naeem, Muhammad
  • Romero-Resendiz, Liliana
  • González, Gonzalo
  • Klyatskina, Elizaveta
  • Amigó, Vicente|||0000-0002-2107-0273
[EN] TiNbZrTa alloys are promising for multidisciplinary applications, such as refractory and biomedical purposes, due to their high thermal stability and non-toxicity. Hardness and elastic modulus are among the key features for their adequate industrial applications. The influence of porosity and Ti/Ta ratio were investigated on TiNbZrTa alloys produced by three different processing routes, i.e., (i) blend element and posterior press and sintering (BE + P&S); (ii) mechanical alloying with press and sintering (MA + P&S); and (iii) arc melting and casting. Porosity decreased in the following order: casting < MA + P&S < BE + P&S. The total porosity of alloys increased with increasing Ta contents, i.e., by lowering the Ti/Ta ratio. However, the Ti/Ta ratio did not considerably affect the bonding energy or the elastic modulus. Hardness was increased significantly in dense alloys compared to porous ones. However, porosity and Ti/Ta ratio did not show a clear trend in hardness among the porous alloys., This research was funded by the Spanish Ministerio de Ciencia, Innovación y Universidades with grant number RTI2018-097810-B-I00 ; the European Commission via the European Regional Development Fund (FEDER); the UNAM-DGAPA-PASPA program (sabbatical year of G.G.); the Programa de Apoyo a Proyectos de Investigacion e Innovacion Tecnologica (PAPIIT)-UNAM under grant number IN102321; the Programa de Apoyo a la Investigación y el Posgrado (PAIP) of the Facultad de Química of Universidad Nacional Autónoma de México under grant number PAIP50009223; and the (PAPIIT)-UNAM under grant number IA102724.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Effect of the microstructure generated by Repetitive Corrugation and Straightening (RCS) process on the mechanical properties and stress corrosion cracking of Al-7075 alloy

  • Romero-Resendiz, L.
  • Elizalde, S.
  • Cabrera, J.M.
  • Pineda-Ruiz, D.
  • Figueroa, I.A.
  • González, G.
  • Amigó, Vicente|||0000-0002-2107-0273
  • Vicente-Escuder, Ángel|||0000-0001-8425-3424
[EN] This study discussed the effect of the heterogeneous microstructure generated through the Repetitive Corrugation and Straightening (RCS) process on the mechanical and stress corrosion cracking behavior of the AA7075. As a result of the RCS process, significant grain refinement was obtained. The average grain size ranged from 126 to 59 mm, for the initial condition and 4 RCS passes, respectively. The yield strength and hardness increased 170% and 15% from the initial pass, remaining almost constant afterward. The evaluation of stress corrosion cracking showed a decrement in the number of cracks of 21.6% and 23.5% between the initial condition and fourth RCS passes. The cracking and pitting corrosion were the dominant mechanisms in the tested samples. The mechanical and corrosion results were also discussed in terms of the microstructural features., Valuable technical support provided by A. Tejeda-Cruz, O. Novelo-Peralta, E. Hernandez-Mecinas, G. A. Lara-Rodriguez, C. Ramos, J. Romero-Ibarra, C. Flores-Morales, and M. Jain is also acknowledged. JMC acknowledges CONACyT (Mexico) for partial funding his sabbatical leave at UMSNH. LRR acknowl-edges CONACyT for the scholarship 592722. This work was supported by grant IN102321 from PAPIIT-UNAM.