Skip to main content

Resultados relacionados

Resultados totales (Incluyendo duplicados): 3
Encontrada(s) 1 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Enhanced cryogenic mechanical properties of heterostructured CrCoNi multicomponent alloy: Insights from in-situ neutron diffraction

  • Naeem, Muhammad
  • Sánchez Cruz, Ricardo J.
  • Esquivel Neri, Miguel A.
  • Ma, Yuemin
  • Knowles, Alexander J.
  • Gong, Wu
  • Harjo, Stefanus
  • Zhu, Yuntian T.
  • Wang, Xun-Li
  • Romero-Resendiz, Liliana
  • Amigó, Vicente|||0000-0002-2107-0273
  • Prieto González, Gonzalo|||0000-0002-0956-3040
[EN] Heterostructured materials (HSMs) has been shown to improve the strength-ductility trade-off of conventional alloys but their cryogenic performance has not been studied during real-time deformation. We investigated heterostructured CrCoNi medium-entropy alloy by in-situ neutron diffraction at cryogenic (77 K) and room (293 K) temperatures. The significant mechanical mismatch at interfaces between fine and coarse grains, due to pronounced grain size disparity, resulted in exceptional yield strength of 918 MPa at 293 K. The yield strength further increased to 1244 MPa at 77 K with an excellent uniform elongation of 34 %. The exceptional strength¿ductility combination at 77 K can be attributed to enhanced geometrically necessary dislocation pile-up density boosted from high-mechanical mismatch interfaces, as well as higher planar faults, and martensitic phase transformation. Comparison with homogenous counterparts demonstrates the potential of HSMs as a new strategy to improve the mechanical performance of different materials, including medium-/high-entropy alloys for cryogenic applications., This work was supported by the Programa de Apoyo a la Investigacion y el Posgrado (PAIP-50009223) of Universidad Nacional Autonoma de Mexico, the Programa de Apoyo a Proyectos de Investigacion e Innovacion Tecnologica (PAPIIT-UNAM IA102724 and IN110124) , and the Research Grants Council of Hong Kong Special Administrative Region (C1020-21G) . M.N. acknowledges Asia-Oceania Neutron Scattering Association (AONSA) for the AONSA Young Research Fellowship (AONSA-YRF-2022) . L.R-R. acknowledges the HORIZON EUROPE programme of research and innovation of the European Union evaluated under the Marie Sklodowska-Curie call and financed by UK Research and Innovation, grant agreement No EP/Y020545/1. X.L.W. thanks the Croucher Foundation for the Croucher Senior Research Fellowship (CityU 9509008) . S.H. acknowledges the support from the MEXT Program: Data Creation and Utilization Type Material Research and Development (JPMXP1122684766) . The neutron experiments at the Materials and Life Science Experimental Facility at J-PARC Center were conducted under the user program (proposal number 2022B0140).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Nanoindentation and orientation imaging analysis of high entropy Ti-Nb-Zr-Ta-Mo alloys exhibiting dendrite microstructure

  • Aranda, V. A.
  • Barba-Pingarrón, A.
  • Figueroa, I.A.
  • González, G.
  • Klyatskina, Elizaveta
  • Amigó, Vicente|||0000-0002-2107-0273
[EN] Refractory high entropy alloys (RHEAs), particularly Ti¿Nb¿Zr¿Ta¿Mo, are promising materials because of their high mechanical properties at elevated temperatures. Although a unique solid-solution phase characterizes these materials, the dendrite structure exhibits a clear element segregation when prepared by liquid route, leading to a different composition between dendrite and interdendrite. This study investigates the local mechanical properties of dendritic and interdendritic regions and the effect of adding Mo on the segregation and hardness. Two alloy compositions, i.e., Ti25 Nb25 Zr25 Ta25 and Ti30 Nb20 Zr20Ta20 Mo10 (at.%), were produced by copper mold suction casting. Characterization was carried out by XRD, EBSD, and nanoindentation mapping. It was observed that Mo reduces the lattice difference between the dendrite and interdendrite; both play different roles during plastic deformation, as interdendrites accumulate higher dislocation density. The alloys did not show any strain hardening after the compression test. Finally, Mo plays a key role in increasing the mechanical properties by solid solution hardening., This work was supported by the Programa de Apoyo a Proyectos de Investigacion e Innovacion Tecnologica (PAPIIT) -UNAM under grant number IN110124 and for the Spanish Ministerio de Ciencia, Innovacion y Universidades with project RTI2028-097810-B-100, and the European Commission via FEDER.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Microstructural and mechanical behavior of second-phase hardened porous refractory Ti-Nb-Zr-Ta alloys

  • González-Guillén, Celia
  • Romero-Resendiz, L.
  • Naeem, M.
  • Vidilli, A.L.
  • Otani, L. B.
  • González, G.
  • Klyatskina, Elizaveta
  • Amigó, Vicente|||0000-0002-2107-0273
[EN] Second-phase hardening in refractory high-entropy alloys (RHEAs) has been recognized as one of the main routes to significantly improve their mechanical properties. However, their cost¿benefit should not be compromised. Thus, we designed second-phase strengthened RHEAs by a low-cost powder metallurgy method. We induced the formation of FCC (face-centered cubic) ZrC second phase, which has not been reported in Ti-Nb-Zr-Ta alloys before and may be easily confused with the FCC-Zr due to the complexity of identifying carbon by conventional methods. We used neutron diffraction and electron backscatter diffraction for microstructural studies, as well as hardness, ultrasonic and compression techniques for assessing mechanical properties. Our investigation centered on equiatomic and equimassic Ti-Nb-Zr-Ta alloys, both displaying similar grain morphology and porosity but differing in grain sizes and phases. The variation in grain size was attributed to the influence of Ta as a grain growth pinning element. Our second-phase ZrC hardened alloys revealed higher stiffness and hardness, surpassing those documented in the existing literature., LRR acknowledges the funding from the Programa de Apoyo a la Investigacion y el Posgrado (PAIP-50009223) of the Chemistry College of Universidad Nacional Autonoma de Mexico, as well as from the Programa de Apoyo a Proyectos de Investigacion e Innovacion Tecnologica (PAPIIT)-UNAM under grant number IA102724. MN thanks the Asia-Oceania Neutron Scattering Association (AONSA) for the award of the AONSA Young Research Fellowship (AONSA-YRF-2022). ALV acknowledges FAPESP for financial support in his internship at UPV under the grant number 2021/11537 1. GG acknowledges PAPIIT-UNAM under grant number IN110124. VA acknowledges the funding from the Spanish Ministerio de Ciencia, Innovacion ¿ y Universidades with project RTI2018 097810-B-I00, and the European Commission via European Regional Development Fund (FEDER). The neutron diffraction experiments were performed at TAKUMI in MLF of J-PARC.