Skip to main content

NUEVAS ESTRATEGIAS DE FUNCIONALIZACION ELECTROQUIMICA DE MATERIALES CARBONOSOS NANOESTRUCTURADOS PARA LA REDUCCION DE OXIGENO Y BIOSENSORES

MAT2016-76595-R

•
Funding agency name Agencia Estatal de Investigación
Funding agency acronym AEI
Program Programa Estatal de I+D+i Orientado a los Retos de la Sociedad
Call Proyectos I+D+i Retos de Investigación
Call year 2016
State Plan 2013-2016 Plan Estatal de Investigación Científica y Técnica y de Innovación
Beneficiary centre UNIVERSIDAD DE ALICANTE

Resultados relacionados

Resultados totales (Incluyendo duplicados): 16
Encontrada(s) 1 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Electrocatalytic Oxidation of Cyanide on Copper-doped Cobalt Oxide Electrodes

  • Berenguer, R.
  • La Rosa-Toro, A.
  • Morallon, E.
  • Quijada, César|||0000-0002-9965-9651
[EN] Copper and copper oxides are well-known excellent catalysts in several chemical processes, but their low mechanical and electrochemical stability restrict their direct utilization as electrodes in electrolytic processes. In this work, the incorporation of copper into cobalt oxide (CuxCo3-xO4) is presented as an excellent approach to obtain highly active and robust copper-based electrocatalysts. Particularly, the electrocatalytic performance of Ti-supported CuxCo3-xO4 electrodes (with 0 <= x <= 1.5) has been studied for the oxidation' of cyanide in alkaline media. Cyclic voltammetry and electrolysis runs show an outstanding effect of Cu on the activity, efficiency and kinetics of spinel CuxCo3-xO4 electrodes for CN(-)electro-oxidation. Despite being active oxides with high activity towards water oxidation, copper saturated (x=1.0) and oversaturated (x=1.5) spinels exhibit unprecedented 100% current efficiencies for the electro-oxidation of CN- in aqueous electrolyte. In situ surface enhanced Raman spectroscopy (SERS) reveals the specific adsorption of CN- ions on surface Cu species to be involved in the electrocatalytic oxidation mechanism. This electrocatalytic activity has been attributed to surface Cu(II) in the spinel lattice. Furthermore, the CuxCo3-xO4 electrodes also display high electrochemical stability. Therefore, they are considered excellent candidates for the sustainable electrochemical elimination of highly toxic cyanides., Financial support from the Spanish Ministerio de Economia y Competitividad and FEDER funds (MAT2016-76595-R, IJCI-2014-20012) and from the Generalitat Valenciana (PROMETEO2013/038) is gratefully acknowledged.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Enhanced adsorptive properties and pseudocapacitance of flexible Polyaniline-activated carbon cloth composites synthesized electrochemically in a filter-press cell

  • Quijada, César|||0000-0002-9965-9651
  • Bou-Belda, Eva|||0000-0003-1461-9296
  • Leite-Rosa, Larissa
  • Berenguer, Raúl
[EN] Electrochemical polymerization is known to be a suitable route to obtain conducting polymer-carbon composites uniformly covering the carbon support. In this work, we report the application of a filter-press electrochemical cell to polymerize polyaniline (PAni) on the surface of large-sized activated carbon cloth (ACC) by simple galvanostatic electropolymerization of an aniline-containing H2SO4 electrolyte. Flexible composites with different PAni loadings were synthesized by controlling the treatment time and characterized by means of Scanning Electron microscopy (SEM), X-Ray Photoelectron Spectroscopy (XPS), physical adsorption of gases, thermogravimetric analysis (TGA), cyclic voltammetry and direct current (DC) conductivity measurements. PAni grows first as a thin film mostly deposited inside ACC micro- and mesoporosity. At prolonged electropolymerization time, the amount of deposited PAni rises sharply to form a brittle and porous, thick coating of nanofibrous or nanowire-shaped structures. Composites with low-loading PAni thin films show enhanced specific capacitance, lower sheet resistance and faster adsorption kinetics of Acid Red 27. Instead, thick nanofibrous coatings have a deleterious effect, which is attributed to a dramatic decrease in the specific surface area caused by strong pore blockage and to the occurrence of contact electrical resistance. Our results demonstrate that mass-production restrictions often claimed for electropolymerization can be easily overcome., This research was funded by Spanish Ministerio de Economia y Competitividad and FEDER funds, (grants MAT2016-76595-R and RYC-2017-23618) and Generalitat Valenciana (grant PROMETEO/2018/087)
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Spectroelectrochemical study on the copolymerization of o-aminophenol and aminoterephthalic acid

  • Abidi, Maali
  • López-Bernabeu, Sara
  • Montilla, Francisco
  • Besbes-Hentati, Salma
  • Morallón, Emilia
  • Huerta, Francisco|||0000-0002-9791-0355
[EN] The electrochemical copolymerization of aminoterephthalic acid (ATA) and o-aminophenol (OAP) was carried out on platinum electrodes in acidic medium. The obtained material, poly (ATA-co-OAP), can be deposited by cyclic scanning of the potential in a wide potential range and shows significant electroactivity. However, it was observed that a copolymer with less over oxidation defects is obtained at inversion potentials where only OAP monomer (and not ATA monomer) is oxidized. The successful incorporation of unoxidized ATA monomers to the growing copolymer chain was confirmed by in situ FTIR spectroscopy and XPS, which suggested a monomer ratio close to 1:2 (ATA:POAP) within the obtained copolymer material. The redox switching of poly(ATA-co-OAP) in acidic medium involves reversible benzenoid-quinoid and phenoxazine-phenoxazone conversions but carboxylic groups do not participate actively on these transformations., Financial support from the Spanish Ministerio de Economía y Competitividad and FEDER funds (MAT2016-76595-R). M. Abidi thanks the Ministry of Higher Education and Scientific Research of Tunisia for funding her stay at the University of Alicante
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Modulation of the electrocatalytic performance of PEDOT-PSS by reactive insertion into a sol-gel silica matrix

  • Djelad, Halima
  • Huerta, Francisco
  • Morallón, Emilia
  • Montilla, Francisco
[EN] Poly(3,4-ethylenedioxythiophene) doped with poly-(styrenesulfonate), PEDOT¿PSS, films synthesized by electrochemical methods can be considered as poor electrocatalyst for the oxidation of ferrocene in aqueous solution. The rate of electron transfer to that redox probe decays progressively as the amount of deposited polymer increases and the true electroactive area available for the electrochemical reaction shows quite modest figures. We present here an alternative, simple way to enhance the properties of this material which uses, exclusively, electrochemical synthesis methods. The electrocatalytic performance can be significantly improved by inserting the polymer within a pre-deposited, three-dimensional porous silica matrix forming an interpenetrating hybrid material. On the one hand, the modified PEDOT-PSS shows doping levels which trebles the unmodified material. On the other, the electron transfer constant and the true electroactive area for ferrocene oxidation increased by a factor of 2 and 4, respectively., Financial support from the Spanish Ministerio de Economia y Competitividad and FEDER funds (MAT2016-76595-R) is gratefully acknowledged.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Electrochemical synthesis of fluorinated polyanilines

  • Saidani, N.
  • Morallón, Emilia
  • Besbes-Hentati, Salma
  • Montilla-Jiménez, Francisco
  • Huerta, Francisco|||0000-0002-9791-0355
[EN] A set of fluoro-functionalized polyaniline conducting polymers was synthesized by cyclic scanning of the potential from acidic solutions containing aniline and 2-fluoroaniline monomers. The monomer feed ratio was varied to modulate the composition of the synthesized materials. The fluorination level of the copolymers was quantified from X-ray photoelectron spectroscopy. The upper inversion potential of the cyclic scans was proved as a suitable tool to tune the fluorination level, as the reactivity of the growing chains depends strongly on that experimental parameter. We found that terminal fluorinated anilines present a reactivity for homocoupling 5 times lower than for heterocoupling, independently of the limiting potential. Conversely, aniline terminal groups present a reactivity strongly dependent on the limiting potential, favoring the heterocoupling reactions at high inversion potentials. The maximum fluorination level of polyaniline rings achieved is about 75%. (C) 2020 Elsevier Ltd. All rights reserved., The authors wish to thank Generalitat Valenciana (PROMETEO/2018/087) for financial support. Nesrine Saidani would like to thank the Tunisian Ministry of Higher Education and Research for funding her stay at the University of Alicante.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Direct Electron Transfer to Cytochrome c Induced by a Conducting Polymer

  • López-Bernabeu, Sara
  • Huerta, Francisco
  • Morallón, Emilia
  • Montilla-Jiménez, Francisco
[EN] The direct electron transfer (DET) to redox proteins has become a central topic in the development of biotechnological devices. The present work explores the mechanisms of the direct electrochemistry between cytochrome c (cyt c) and a conducting polymer, poly(3,4ethylenedioxythiophene) doped with poly(styrenesulfonate) (PEDOT PSS). This polymer has been electrosynthesized from its monomers in aqueous solution on gold electrodes, and its capabilities for DET to cyt c have been examined by electrochemical and spectroelectrochemical methods. The polymer was electrodeposited with controlled thickness, and we determined that the electron transfer rate constant for cyt c oxidation was about 2 orders of magnitude higher than those obtained at conventional electrodes. Spectroelectrochemical measurements allowed us to evaluate the redox state of the polymer as a function of the potential and, in addition, the observation of intrinsic cyt c redox activity upon electron transfer from the conducting polymer. During the oxidation process of this protein, lysine residues placed near the heme crevice interact electrostatically with the anionic polyelectrolyte PSS. This interaction favors the orientation of the heme group toward the chains of the PEDOT backbone, which is eventually responsible for the electron transfer to the protein., We gratefully acknowledge financial support from the Spanish Ministerio de Economia y Competitividad and FEDER funds (MAT2016-76595-R) and the Generalitat Valenciana (PROM-ET02013/038).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

An Electrochemical Study on the Copolymer Formed from Piperazine and Aniline Monomers

  • Dkhili, Samiha
  • López-Bernabeu, Sara
  • Kedir, Chahineze Nawel
  • Huerta, Francisco
  • Montilla, Francisco
  • Besbes-Hentati, Salma
  • Morallon, Emilia
[EN] A study on the electrochemical oxidation of piperazine and its electrochemical copolymerization with aniline in acidic medium is presented. It was found that the homopolymerization of piperazine cannot be achieved under electrochemical conditions. A combination of electrochemistry, in situ Fourier transform infrared (FTIR), and ex situ X-ray photoelectron spectroscopy (XPS) spectroscopies was used to characterize both the chemical structure and the redox behavior of an electrochemically synthesized piperazine¿aniline copolymer. The electrochemical sensing properties of the deposited material were also tested against ascorbic acid and dopamine as redox probes., This research was funded by the Spanish Ministerio de Economia y Competitividad and FEDER funds, grant MAT2016-76595-R. The stay of S. Dkhili at the University of Alicante was funded by the Ministry of Higher Education and Scientific Research of Tunisia.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Electro-oxidation of cyanide on active and non-active anodes: Designing the electrocatalytic response of cobalt spinels

  • Berenguer, R.
  • La Rosa-Toro, A.
  • Morallón, E.
  • Quijada, César|||0000-0002-9965-9651
[EN] The feasibility of the electrochemical technologies for wastewater treatment greatly relies on the design of efficient but inexpensive electrocatalysts. It is generally accepted that the so-called ¿non-active¿ anodes (like the boron-doped diamond (BDD) or SnO2-based anodes), producing highly oxidizing hydroxyl radicals, are the most promising candidates for pollutants abatement. In this work, the electrocatalytic performance of various cobalt oxides, pure and doped with Cu or Au, for CN¿ oxidation has been studied and compared with that of conventional graphite, BDD, SnO2-Sb and SnO2-Sb-Pt. The metal oxide electrodes were prepared by thermal decomposition of the salt precursors onto Ti. For the M-doped Co3O4 electrodes, the nominal M/Co ratios were Cu/ Co=0.07¿1.00; and Au/Co=0.05¿0.20. The electrodes were characterized by different techniques (XRD, SEM, EDX, XPS) and their electrocatalytic response was studied by cyclic voltammetry and galvanostatic electrolysis in a H-type cell in aqueous 0.1M NaOH. The obtained results show that the nature of the dopant plays a key role on the electrocatalytic behavior of cobalt spinels. Thus, while Cu catalyzes the CN¿ electro-oxidation, Au declines it. This is explained by the fact that, unlike Au (which segregates as Au-rich particles), Cu is effectively incorporated into the spinel structure by forming a solid solution (CuxCo3-xO4). In this solid solution, atomic scale Cu(spinel)-CN¿ specific interactions occur to catalyze the reaction, whereas in segregated Au particles the oxidation is hindered probably by a too-strong adsorption of cyanide and/or its inaccessibility to oxide active sites. Electrolysis runs have revealed that ¿active¿ over-saturated Cu-doped spinels (Cu/Co=1.00) exhibit higher current efficiencies than conventional graphite and ¿non-active¿ BDD and SnO2-based anodes. Hence, we hereby demonstrate that an inexpensive ¿active¿ electrocatalyst can show even higher efficiency than the most powerful BDD anode. These results highlight the significance of anode design in the application of the electrochemical technique for wastewater treatment., Financial support from the Spanish Ministerio de Economia y Competitividad and FEDER funds (MAT2016-76595-R, IJCI-2014-20012) is gratefully acknowledged
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Synthesis of Phosphorus-Containing Polyanilines by Electrochemical Copolymerization

  • Martínez-Sánchez, Beatriz
  • Quintero-Jaime, Andrés Felipe
  • Cazorla-Amorós, Diego
  • Morallón, Emilia
  • Huerta, Francisco|||0000-0002-9791-0355
[EN] In this study, the phosphonation of a polyaniline (PANI) backbone was achieved in an acid medium by electrochemical methods using aminophenylphosphonic (APPA) monomers. This was done through the electrochemical copolymerization of aniline with either 2- or 4-aminophenylphosphonic acid. Stable, electroactive polymers were obtained after the oxidation of the monomers up to 1.35 V (reversible hydrogen electrode, RHE). X-ray photoelectron spectroscopy (XPS) results revealed that the position of the phosphonic group in the aromatic ring of the monomer affected the amount of phosphorus incorporated into the copolymer. In addition, the redox transitions of the copolymers were examined by in situ Fourier-transform infrared (FTIR) spectroscopy, and it was concluded that their electroactive structures were analogous to those of PANI. From the APPA monomers it was possible to synthesize, in a controlled manner, polymeric materials with significant amounts of phosphorus in their structure through copolymerization with PANI., The authors would like to thank MINECO, FEDER (MAT2016-76595-R) for financial support. A.F.Q.-J. gratefully acknowledges the Generalitat Valenciana for the financial support through the Santiago Grisolia grant (GRISOLIA/2016/084). B.M.-S. acknowledges the Vice-rectorate for Research and Knowledge Transfer of University of Alicante for financial support (AII2018-16), as well as the Spanish Ministry of Science, Innovation and Universities for the FPU grant (FPU18/05127).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

A self-doped polyaniline derivative obtained by electrochemical copolymerization of aminoterephthalic acid and aniline

  • Dkhili, S.
  • López-Bernabeu, Sara
  • Huerta, Francisco
  • Montilla-Jiménez, Francisco
  • Besbes-Hentati, S.
  • Morallón, Emilia
[EN] The electrochemical copolymerization of aminoterephthalic acid and aniline can be achieved to yield a self-doped material showing electroactivity at physiological pH. The present study focusses on the management of the synthesis conditions to obtain a true copolymerization product and to control the relative amount of both comonomers eventually incorporated to the copolymer chain. Both, in situ FTIR spectroscopy and ex situ XPS techniques proved the successful incorporation of aminoterephthalic acid and, in parallel to other polyaniline parent derivatives, revealed the existence of redox transformations involving leucoemeraldine-emeraldine-pernigraniline transitions. The use of a high inversion potential (1.4¿V/RHE) during electro-copolymerization resulted in a material enriched in aminoterephthalic acid fraction with respect to aniline, while this last component is favored at lower potentials. The pH behavior of copolymers in combination with in situ FTIR results strongly suggested that a larger content of aminoterephthalic acid (such as that obtained after deposition at 1.4¿V) do not ensure an extensive self-doping process because a significant fraction of those carboxylic moieties remain inactive during the redox transformation. Instead, low inversion potentials are preferred to obtain a material with less defects and thoroughly electroactive at physiological pH., Financial support from the Spanish Ministerio de Economia y Competitividad and FEDER funds (MAT2016-76595-R) is gratefully acknowledged. S. Dhkili thanks the Ministry of Higher Education and Scientific Research of Tunisia for funding her stay at the University of Alicante.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Copper-doped cobalt spinel electrocatalysts supported on activated carbon for hydrogen evolution reaction

  • Flores-Lasluisa, Jhony X.
  • Quilez-Bermejo, Javier
  • Ramirez-Perez, Ana C.
  • Huerta, Francisco
  • Cazorla-Amorós, Diego
  • Morallón, Emilia
[EN] The development of electrocatalysts based on the doping of copper over cobalt spinel supported on a microporous activated carbon has been studied. Both copper-cobalt and cobalt spinel nanoparticles were synthesized using a silica-template method. Hybrid materials consisting of an activated carbon (AC), cobalt oxide (Co3O4), and copper-doped cobalt oxide (CuCo2O4) nanoparticles, were obtained by dry mixing technique and evaluated as electrocatalysts in alkaline media for hydrogen evolution reaction. Physical mixtures containing 5, 10, and 20 wt.% of Co3O4 or CuCo2O4 with a highly microporous activated carbon were prepared and characterized by XRD, TEM, XPS, physical adsorption of gases, and electrochemical techniques. The electrochemical tests revealed that the electrodes containing copper as the dopant cation result in a lower overpotential and higher current density for the hydrogen evolution reaction., This research was funded by MINECO and FEDER (MAT2016-76595-R).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

The nature of the electro-catalytic response of mixed metal oxides: Pt- and Ru-doped SnO2 anodes

  • Berenguer Betrián, Raúl
  • Morallón, Emilia
  • Quijada, César|||0000-0002-9965-9651
[EN] The catalytic behavior of metal oxides for oxidative reactions is generally classified into active or non-active, depending on whether surface redox species participate or not. In the case of mixed metal oxides, however, this simplified scenario may be more complex. Non-active oxides containing electroactive metal species, like Pt- and/or Ru-doped SnO2 electrodes, are promising anode materials for the electrochemical treatment of waste-waters. This work analyzes the effect of Pt and Ru species on the nature of the electro-oxidative catalytic response of Ti/SnO2 anodes. For this purpose, the electro-oxidation of phenol and the competing oxygen evolution reaction (OER) in NaOH have been chosen as model reactions. The different electrodes and reactions were characterized by cyclic voltammetry, electro- chemical impedance spectroscopy, and Tafel measurements. The obtained results reveal that both Pt and Ru introduce solid-state redox processes and catalyze the OER and the phenol oxidation onto Ti/SnO2-based electrodes. Nevertheless, the dopants induce quite different active behaviors in the mixed oxides. Pt practically does not affect the OER mechanism, but enhances its kinetics, so its electrocatalytic activity is associated with a specific adsorption of hydroxyl anions or phenolate on Pt sites, without participation of the irreversible Pt/PtOx couple (i.e. a "non-redox-active" behavior). On the contrary, Ru species involve various and highly reversible redox processes that accelerate and modify the rate-determining step of the OER, and that actively mediate in the phenol oxidation., Financial support from the Spanish Ministerio de Economia y Competitividad and FEDER funds (MAT2016-76595-R, IJCI-201420012) is gratefully acknowledged.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Structural and morphological alterations induced by cobalt substitution in LaMnO3 perovskites

  • Flores-Lasluisa, Jhony X.
  • Cazorla-Amoros, Diego
  • Morallón, Emilia
  • Huerta, Francisco|||0000-0002-9791-0355
[EN] The chemical composition of a LaMnO3 perovskite was modified sequentially by an improved sol-gel method to include cobalt centers in some B sites formerly occupied by Mn. In this way, a representative set of materials of general formula LaMn1-xCoxO3 was obtained whose composition extends from LaMnO3 to LaCoO3. These perovskites, as promising materials for oxygen reduction or oxygen evolution reactions, were characterized by several imaging (SEM), spectroscopic (XPS, EDX) and diffraction (XRD) techniques to elucidate their structure and to demonstrate the existence of composition differences between the catalytic surface and the bulk material. Specifically, it was found that lanthanum ions prevail at the surface of the catalyst but high cobalt-substitution levels stimulate the surface enrichment in B cations in their respective higher oxidation states (Mn4+ and Co3+ against Mn3+ and Co2+). This phenomenon opens the possibility of tuning their electrocatalytic properties and to synthesize suitable materials for electrochemical reactions involving molecular oxygen. (C) 2019 Elsevier Inc. All rights reserved., The authors thank MINECO and FEDER (MAT2016-76595-R) for the financial support. J.X.F.-L. gratefully acknowledges MINECO for the financial support through FPI contract (BES-2017-081598).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Enhancement of the direct electron transfer to encapsulated cytochrome c by electrochemical functionalization with a conducting polymer

  • López-Bernabeu, Sara
  • Gamero-Quijano, Alonso
  • Huerta, Francisco
  • Morallón, Emilia
  • Montilla, Francisco
[EN] The present work deals with the direct electrochemistry of cytochrome c (cyt c) encapsulated within a methyl-modified silica film prepared by the sol-gel method. It was observed that the voltammetric currents of the redox processes grow in proportion to the protein amount inserted within the gel up to a limiting value. From that point, recorded currents remain independent of the amount of protein loaded. Such a behavior indicates that a portion of cytochrome c molecules is located in non-accessible sites of the silica matrix. The electrochemical insertion of poly(3,4-ethylenedioxythiophene) (PEDOT) through silica pores was carried out to connect those electrically isolated protein molecules and in situ UV¿vis spectroscopy was used to gain information on the redox process of encapsulated cyt c. It was observed that the presence of conducting polymer gives rise to a 3-fold enhancement in cyt c electrochemical reduction rate at the initial stages of the treatment, irrespective of the amount of inserted polymer. The faster electrochemical reduction rate was obtained after the insertion of 6.45 ¿g PEDOT within a silica gel containing 0.5 mg protein. The presence of low conductivity domains in the conducting polymer or the hindrance to the protein free movement could explain that higher amounts of inserted PEDOT cannot improve the electrochemical reduction rate., Financial support from the Spanish Ministerio de Economia y Competitividad and FEDER funds (MAT2013-42007-P and MAT2016-76595-R) and from the Generalitat Valenciana (PROMETEO2013/038) is gratefully acknowledged.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Affinity of electrochemically deposited sol-gel silica films towards catecholamine neurotransmitters

  • Porcel-Valenzuela, M.
  • Huerta, Francisco
  • Morallón, Emilia
  • Montilla-Jiménez, Francisco
[EN] Dopamine, norepinephrine, and epinephrine neurotransmitters can be detected by electrochemical oxidation in conventional electrodes. However, their similar chemical structure and electrochemical behavior makes a difficult selective analysis. In the present work, glassy carbon electrodes have been modified with silica layers, which were prepared by electroassisted deposition of sol¿gel precursors. These layers were morphologically and compositionally characterized using different techniques, such as field emission scanning electron microscopy (FESEM), TEM, FTIR, or thermogravimetric analysis¿mass spectrometry (TG-MS). The affinity of silica for neurotransmitters was evaluated, exclusively, by means of electrochemical methods. It was demonstrated that silica adsorbs dopamine, norepinephrine, and epinephrine, showing different interaction with silica pores. The adsorption process is dominated by a hydrogen bond between silanol groups located at the silica surface and the amine groups of neurotransmitters. Because of the different interaction with neurotransmitters, electrodes modified with silica films could be used in electrochemical sensors for the selective detection of such molecules., This research was funded by the Ministerio de Ciencia, Innovación y Universidades (MAT2016-76595-R) and Conselleria de Educación, Investigación, Cultura y Deporte, Generalitat Valenciana (PROMETEO/2018/087).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Efficient Pt electrocatalysts supported onto flavin mononucleotide–exfoliated pristine graphene for the methanol oxidation reaction

  • Ayán-Varela, Miguel
  • Ruiz-Rosas, R.
  • Villar Rodil, Silvia
  • Paredes Nachón, Juan Ignacio
  • Cazorla-Amorós, D.
  • Morallón, E.
  • Martínez Alonso, Amelia
  • Díez Tascón, Juan Manuel
Due to its large surface area, high electrical conductivity as well as mechanical and thermal stability, pristine graphene has the potential to be an excellent support for metal nanoparticles (NPs), but the scarce amount of intrinsic chemical groups/defects in its structure that could act as anchoring sites for the NPs hinders this type of use. Here, a simple strategy based on the stabilization of pristine graphene in aqueous dispersion with the assistance of a low amount of flavin mononucleotide (FMN) is shown to yield a material that combines high electrical conductivity and abundance of extrinsic anchoring sites, so that pristine graphene–metal (Pd and Pt) NP hybrids with good dispersion and metal loading can be obtained from FMN–stabilized graphene. The activity of these hybrids towards the methanol oxidation reaction (MOR) both in acidic and alkaline media is studied by cyclic voltammetry (CV) and their stability investigated by chronoamperometry. The pristine graphene–Pt NP hybrid prepared by this simple, eco–friendly protocol is demonstrated to outperform most previously reported pristine graphene– and reduced graphene oxide–metal NP hybrids as electrocatalyst for the MOR, both in terms of catalytic activity and stability, avoiding at the same time the use of harsh chemicals or complex synthetic routes., Financial support from the Spanish Ministerio de Economía y Competitividad (MINECO) and the European Regional Development Fund (FEDER) through projects MAT2015-69844-R and MAT2016-76595-R is gratefully acknowledged. We also acknowledge partial funding by Plan de Ciencia, Tecnología e Innovación 2013-2017 del Principado de Asturias and FEDER through grant GRUPIN14-056. M.A-V. is thankful to MINECO and for his pre-doctoral contract. R.R.R acknowledges financial support from MINECO through “Juan de la Cierva” program (JCI-2012-12664)., Peer reviewed