Skip to main content

Resultados relacionados

Resultados totales (Incluyendo duplicados): 3
Encontrada(s) 1 página(s)

e_Buah Biblioteca Digital Universidad de Alcalá
Publication Artículo científico (JournalArticle)

Early age and hardened properties of 3D printable cement-lime mortars with microencapsulated PCM and cellulose microfibers

  • Ramallo Aznar, Laura|||0000-0003-3822-6868
  • Márquez Martín, Álvaro|||0000-0001-8554-9614
  • Palomar Herrero, Irene|||0000-0003-2743-3618
  • Barluenga Badiola, Gonzalo|||0000-0002-2996-3412
The design of sustainable functionalized materials suitable for new building technologies has become a challenge for the construction sector. In this study, 3D printable cement-lime mortars incorporating microencapsulated phase change material (PCM) and cellulose microfibers (CMF) were designed and experimentally characterized considering the requirements for architectural applications. The use of lime aims to reduce environmental impact, PCM intends to enhance thermal performance and CMF to provide early age integrity. Two reference mortars were designed, with and without CMF, and PCM was incorporated at 10, 20 and 30% into both reference mixtures. An experimental program was carried out evaluating mortars’ fresh state rheological properties, early age performance and short- and long-term hardened-state physical, thermal and mechanical properties. Long- term carbonation was also assessed. The experimental approach provided a comprehensive understanding of how these components interact across all relevant stages of material development, from fresh state to long-term performance. Lime densified mortar matrix, due to carbonation, contributing to strength gain and reducing water absorption. PCM improved thermal behavior by enhancing their energy storage capacity up to a 35 – 40%, while CMF mitigated early age setting delays in mixtures containing PCM but reduced the thermal storage enhancement at PCM contents above 20%., European Commission, Junta de Castilla-La Mancha
e_Buah Biblioteca Digital Universidad de Alcalá
Publication Artículo científico (JournalArticle)

Bio-based self-modulating thermal and moisture buffer mortars for architectural applications

  • Palomar Herrero, Irene|||0000-0003-2743-3618
  • Barluenga Badiola, Gonzalo|||0000-0002-2996-3412
  • Puentes Mojica, Javier|||0000-0001-8748-7664
  • Varela Recio, Hugo|||0000-0001-8094-6071
New construction materials for architectural applications need to face environmental impact and energy efficiency issues. Self-modulating materials are promising solutions to optimize the energy performance of buildings, by compensating climatic hygro-thermal changes. Phase-change materials (PCM) and Superabsorbent polymers (SAP) highlight among bio-based components that can be used to design self-modulating mortars. On one hand, PCM can storage and release thermal energy, modulating heat flow and reducing heating and cooling energy demand. On the other, SAP can help to achieve suitable indoor conditions as they level air humidity and contribute to an evaporative cooling effect. In addition, these polymeric materials can be made from renewable bio-resources, becoming bio-based materials. This paper presents a study reporting materials selection, mortar composition design and experimental tests and procedures used to assess thermal and moisture self-modulating properties of PCM and SAP modified mortars for architectural applications as buffer layers. A pervious cement-lime mixture was designed and different amounts and combinations of two types of SAP (spherical and irregular particle shape) and a microencapsulated PCM were evaluated. Mortars? fresh workability and setting and hardened physical and mechanical properties, microstructure, thermal (heat conductivity and storage properties) and hygric parameters (water and vapor transport and storage) and long term carbonation were studied. The preliminary results of self-modulating mortars showed that SAP and PCM can increase moisture and thermal properties, enhancing buffer capacities of architectural mortar renderings., Comunidad de Madrid, Universidad de Alcalá, Comisión Europea (Fondos Next Generation)
e_Buah Biblioteca Digital Universidad de Alcalá
Publication Artículo científico (JournalArticle)

Printability assessment of 3D printing cement-lime mortars with microencapsulated PCM

  • Márquez Martín, Álvaro|||0000-0001-8554-9614
  • Ramallo Aznar, Laura|||0000-0003-3822-6868
  • Palomar Herrero, Irene|||0000-0003-2743-3618
  • Barluenga Badiola, Gonzalo|||0000-0002-2996-3412
An experimental study was conducted to evaluate the printability of cement–lime mortars designed for 3D printing applications, incorporating a microencapsulated phase-change material (PCM) and cellulose microfibers (CMFs). The influence of both PCM and CMFs on mortars’ rheology was measured by rheometer tests (DSR) and cone penetration tests (CPT). A ram extrusion test was used to evaluate the extrudability, and an unconfined uniaxial compression test (UUCT) allowed the assessment of buildability. Finally, several lab-scale prototypes were 3D-printed. The results showed that the incorporation of PCM affected mortar’s rheology and workability due to the reduction in paste volume and the increase in superplasticizer (SP) demand. However, the spherical particle shape of microencapsulated PCM was found to ease the extrusion process. After being extruded, mortars with lower volumetric fractions of PCM exhibited increased fresh strength and stiffness, whereas larger amounts reduced both parameters. The use of CMFs considerably reduced the extrusion force and improved the extrusion quality. Lab-scale 3D-printed prototypes were successfully manufactured using mortars with a 20% volumetric fraction of PCM., European Commission, Junta de Comunidades de Castilla-La Mancha