Skip to main content

Resultados relacionados

Resultados totales (Incluyendo duplicados): 2
Encontrada(s) 1 página(s)

Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publication Artículo científico (JournalArticle)

Aging behavior of commercial 18650 sodium-ion cells revealed by non-destructive impedance-derived parameters and post-mortem analysis

  • Irujo Izcue, Elisa
  • Berrueta Irigoyen, Alberto
  • Schütte, Moritz Fabian
  • Ditler, Heinrich
  • Rahe, Christiane
  • Sauer, Dirk Uwe
  • Sanchis Gúrpide, Pablo
  • Ursúa Rubio, Alfredo
The rapid expansion of energy storage needs and concerns over lithium availability have renewed interest in sodium-ion batteries (SIBs) as a complementary technology to lithium-ion systems. Yet, systematic studies on their aging analysis strategies with the aim of detecting aging indicators remain limited. In this study, we present a comprehensive aging analysis, combining non-destructive electrochemical impedance spectroscopy (EIS) with equivalent circuit model (ECM) parameter tracking and post-mortem analysis. Tracking the longitudinal evolution of ECM-derived parameters demonstrates their utility as aging indicators. Post-mortem and elemental mapping analysis provides mechanistic support for the impedance trends, focusing on characterizing aging mechanisms from a morphological perspective. The methodology is applied to a commercial 1.3 Ah 18650 SIB with a layered-oxide cathode and hard carbon anode at an early-stage development showing a short life cycle of 500 cycles to reach a SOH of 50%, but slower capacity fade under calendar remaining over a SOH of 90% after more than 600 days. ECM parameters show consistent evolution with SOH and aging mechanisms occurring inside the battery observing correlations valuable for potential aging indicators. Post-mortem and elemental mapping confirm sodium plating on the anode surface even in pristine cells. The study clarifies their compositional and morphological evolution through aging. Notably, the study investigates cells down to <[jls-end-space/]60% SOH, a range rarely reported in the literature. The methodology proposed here establishes a replicable framework for monitoring degradation and evaluating aging indicators in sodium-ion batteries, facilitating comparative studies across early-stage cells and supporting the design of improved future generations., This work was supported by grants PID2022-139914OB-I00 funded by MICIU/AEI/10.13039/501100011033/ (Spain) and by ERDF/EU (European Union) , and by PRIDEBAT ( PC24-PRIDEBAT-014-002 ) funded by the Department of University, Innovation and Digital Transformation of the Government of Navarre (Spain) . It was also supported by the Federal Ministry for Economic Affairs and Energy (BMWE) of Germany under grant number 03EI6106 (WINTER) and by the Federal Ministry of Research, Technology and Space (BMFTR) of Germany under grant number 03XP0627I (SIB:DE). Elisa Irujo was supported by a predoctoral contract from the Public University of Navarre (Spain) .
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publication Artículo científico (JournalArticle)

A novel aging modeling approach for second-life lithium-ion batteries

  • Pérez Ibarrola, Ane
  • San Martín Biurrun, Idoia
  • Sanchis Gúrpide, Pablo
  • Ursúa Rubio, Alfredo
The electric mobility industry is booming. In order to reduce the environmental impact of this boom, there is the potential to reuse the batteries from electric vehicles. However, the technical and economic feasibility of the second-life of lithium-ion batteries remains in question. This is due to the intricate non-linear mechanisms that occur during battery degradation, leading to capacity and power loss. Ongoing research aims to create models that can predict the state of battery degradation. However, most studies have focused on the battery's first life, operating within a limited state of health range and requiring constant monitoring of the battery's exposure conditions. While these models provide satisfactory results for the battery's performance in vehicles, they cannot be directly applied to second-life scenarios. In response to this issue, this article proposes a degradation modeling method for second-life batteries based on identifying and linearizing different degradation trends within the battery. This approach allows the application of the model without prior knowledge of the battery's history. It has been validated for a state of health range of 95% to 20%, through both conventional charge-discharge tests and a real-world scenario involving a smart charging station for urban buses. The results obtained with the developed model are overall satisfactory, achieving a MAPE below 3% for capacity and 1.4% for internal resistance in the real-world scenario., This work was supported by grants PID2022-139914OB-I00 funded by MICIU/AEI/10.13039/501100011033/ (Spain) and by ERDF/EU (European Union), TED2021-132457B-I00 funded by MICIU/AEI/10.13039/501100011033/ (Spain) and by the NextGenerationEU/PRTR (European Union), HYBPLANT (0011-1411-2022-000039) and PRIDEBAT (PC24-PRIDEBAT-014-002) funded by the Departamento de Universidad, Innovación y Transformación Digital (Department of University, Innovation and Digital Transformation) of the Goverment of Navarre (Spain), and Lion2H2 (PJUPNA2023-11380) funded by the Public University of Navarre (Spain).