Skip to main content

ELECTRO-ELECTRODIALISIS APLICADA A LA INDUSTRIA DE PROCESAMIENTO DE MINERALES DE COBRE PARA LA RECUPERACION DE ANTIMONIO DE LAVADOS DE MINAS Y RECICLAJE DE LA DISOLUCION

PCI2019-103535

•
Funding agency name Agencia Estatal de Investigación
Funding agency acronym AEI
Program Programa Estatal de I+D+i Orientado a los Retos de la Sociedad
Call Proyectos Programación Conjunta Internacional
Call year 2019
State Plan 2017-2020 Plan Estatal de Investigación Científica y Técnica y de Innovación
Beneficiary centre UNIVERSITAT POLITÈCNICA DE VALÈNCIA

Resultados relacionados

Resultados totales (Incluyendo duplicados): 6
Encontrada(s) 1 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Increasing the sustainability of copper electrorefining: Selective electrodeposition of antimony in the presence of bismuth from highly concentrated hydrochloric acid effluents

  • Hernández-Pérez, Lorena
  • Muñoz-Perez, Alejandro
  • Ortega Navarro, Emma María|||0000-0001-6902-018X
  • Pérez-Herranz, Valentín|||0000-0002-4010-0888
  • Montañés, Maria-Teresa|||0000-0002-2620-6926
  • Martí Calatayud, Manuel César|||0000-0002-0745-1918
[EN] Recovering critical materials from effluents of the copper electrorefining would improve the circularity and sustainability of this industry. In this task, selectivity is crucial to separate metals present in multi-component electrolytes and obtain added value products. Electrodeposition can be used to recover metals individually when their reduction takes place at different potentials. Moreover, the preferential deposition of a specific element can also be modulated under galvanostatic control. In this study, the recovery and separation of antimony and bismuth from highly concentrated hydrochloric acid solutions is investigated by means of voltammetry and electrodeposition. In potentiostatic mode, the preferential deposition of antimony takes place at -0.25 VAg/AgCl, although a moderate selectivity is achieved. Under galvanostatic mode, at current densities below the limiting value (i_L), the deposition of bismuth is almost prevented, and the selectivity factor for antimony reaches the highest values. These results prove the feasibility of a highly selective antimony recovery by electrodeposition. When the i_L is exceeded, the selectivity towards antimony drops because more cathodic potentials are reached, which activate the deposition of bismuth and hydrogen evolution, thus decreasing the overall electrodeposition current efficiency. Upon an increase in the proportion of bismuth in the mixtures, high current densities also favor the deposition of this metal but decrease the contribution of hydrogen evolution reaction as compared to solutions with a higher proportion of antimony. Thus, the process can also be conducted at high electrodeposition current densities, yet at the cost of obtaining the product in the form of an alloy., The authors thank the financial support from the Agencia Estatal de Investigacion (AEI/10.13039/501100011033) (Spain) under the project PCI2019-103535 and by FEDER A way of making Europe. Funding for open access charge: CRUE-Universitat Politecnica de Valencia.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Effluents from the copper electrorefining as a secondary source of antimony: Role of mass transfer on the recovery by electrodeposition

  • Hernández-Pérez, Lorena
  • Carrillo-Abad, Jordi
  • Pérez-Herranz, Valentín|||0000-0002-4010-0888
  • Montañés, Maria-Teresa|||0000-0002-2620-6926
  • Martí Calatayud, Manuel César|||0000-0002-0745-1918
[EN] The limited availability of antimony has increased the need for exploiting alternative sources to its direct extraction from stibnite deposits. Furthermore, introducing recovery techniques in industries where antimony is released in wastewaters leads to more responsible production routes. In this work, electrodeposition is employed to recover the antimony present in a secondary waste effluent of the copper electrorefining that is highly concentrated in hydrochloric acid. The electrochemical characterization of the system was conducted by voltammetry to identify a range of suitable operating conditions for the potentiostatic and galvanostatic electro-recovery of antimony. In potentiostatic mode, the progress of the secondary electrode reactions of hydrogen and chlorine evolution at potentials more cathodic than ¿0.38 V vs. Ag/AgCl causes the detachment and redissolution of the deposited antimony. Operating under galvanostatic control, similar effects were observed when the limiting current density is exceeded. Current efficiency and specific energy consumption values above 50 % and below 65 kW·h·kg¿1, were achieved below the limiting current density (1.265 mA·cm¿2). The operational range where electrodeposition of antimony is accelerated at increasing current densities can be broadened at intensified hydrodynamic conditions and higher concentrations of antimony. The detrimental effect of the hydrogen evolution reaction on the recovery of antimony decreases at high HCl concentrations., The authors thank the financial support from the Agencia Estatal de Investigacion (AEI/10.13039/501100011033) (Spain) under the project PCI2019-103535 and by FEDER A way of making Europe. Funding for open access charge: CRUE-Universitat Politecnica de Valencia.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Voltammetric and electrodeposition study for the recovery of antimony from effluents generated in the copper electrorefining process

  • Hernández-Pérez, Lorena
  • Carrillo-Abad, Jordi
  • Ortega Navarro, Emma María|||0000-0001-6902-018X
  • Pérez-Herranz, Valentín|||0000-0002-4010-0888
  • Montañés, Maria-Teresa|||0000-0002-2620-6926
  • Martí Calatayud, Manuel César|||0000-0002-0745-1918
[EN] Antimony is a metalloid with limited availability as a primary resource, but it is commonly found as an impurity in effluents generated in the copper metallurgy. Thus, the development of clean and selective processes to recover antimony from these wastewaters would improve the sustainability of the copper production. In this work, an emulated effluent of the copper electrorefining industry that contains antimony and hydrochloric acid was characterized by means of voltammetric and electrodeposition tests using two different cell configurations: a static cell, and a dynamic cell with a rotating disk electrode (RDE). Voltammograms were obtained at varying hydrochloric acid and antimony concentrations, inversion potentials, scan rates and RDE rotation rates. Two main conclusions were drawn: (a) the deposition of antimony is a mass transfer-controlled process; and (b) an increase in hydrochloric acid concentration improves the deposition of antimony. The diffusion coefficient of antimony species was obtained applying the Randles-Šev¿ík and the Levich equations; both of them providing very similar values (5.29 ± 0.20 · 10¿6 cm2 s¿1). The effective electrodeposition of antimony from highly concentrated hydrochloric acid solutions was demonstrated. The surface examination of the electrodes revealed that compact and adherent deposits of antimony could be obtained under operating conditions that minimize the hydrogen evolution reaction in both potentiostatic and galvanostatic modes. Intensified convective regimes by using the RDE improve the supply of dissolved antimony towards the electrode surface, thus leading to a notorious increase in current density and, consequently, in the rate of antimony deposition., The authors thank the financial support from the Agencia Estatal de Investigacion (AEI/10.13039/501100011033) (Spain) under the project PCI2019-103535 and by FEDER A way of making Europe. Funding for open access charge: CRUE-Universitat Politecnica de Valencia.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Membrane electrolysis for recovering Sb and Bi from elution solutions of ion-exchange resins used in copper electrorefining: A cyclic voltammetric study

  • Santana-Barros, Kayo
  • Pérez-Herranz, Valentín|||0000-0002-4010-0888
  • Machado, André Luiz Vargas
  • Vielmo, Vicente Schaeffer
  • Velizarov, Svetlozar
  • Ferreira, Jane Zoppas
  • Bernardes, Andrea Moura
[EN] Antimony (Sb) and bismuth (Bi), which have been considered critical raw materials by the European Commission, cause inconveniences to copper production when they are present as impurities in copper elec-trorefining solutions. Therefore, ion-exchange resins to extract Sb and Bi from copper-containing electrolytes have typically been applied; after the adsorption of the metals, the elution step is conducted with an HCl solu-tion to desorb them. In the present study, a novel membrane electrolysis system with a cation-exchange mem-brane was proposed to extract Sb and Bi ions from the elution solution, and a cyclic voltammetric study was carried out to evaluate the influence of the most important operating parameters on the process performance, such as Sb, Bi and HCl concentration, dilution factor of the solution, the presence of thiourea as a complexing agent, the presence of iron as an impurity, and temperature. The obtained voltammograms indicated that the simultaneous presence of the metals in solution alters considerably their electrodeposition and oxidation pat-tern when compared to the solutions with pure metals. The reactions of electrodeposition of both metals are not electrochemically reversible and the diffusion control for bismuth is greater than that for antimony. The increase in the concentration of Sb affects its electrodeposition kinetically, whereas that of Bi is affected both kinetically and thermodynamically. The increase in HCl concentration disfavors the electrodeposition of both metals. Diluting the solution reduces the energy consumption and prolongs the membrane lifespan. Increasing the temperature reduces the cathodic potential to deposit the metals but favors the hydrogen evolution reac-tion. The presence of iron as an impurity does not affect the electrodeposition of both metals, whereas the use of thiourea as a complexing agent must be avoided because it impairs their electrodeposition., The authors gratefully acknowledge the financial support given by the funding agencies Ministerio de Universidades de Espana (European Union-Next Generation EU), CNPq (Process 160320/2019-4), Cyted (Network 318RT0551), ERAMIN2 (Network Sb-RECMEMTEC, FINEP-Brazil, ANID-Chile, and Agencia Estatal de Investigacion (AEI) - Spain), Direccin de Investigacion Cientifica y Tecnologica (DICYT) of the Universidad de Santiago de Chile, UFRGS (BIC-IQR838393LRG), Agencia Estatal de Investigacion (AEI) - Spain, through the project PCI2019-103535 (Co-funded by the European Regional Development Fund (FEDER), a way to build Europe). This study was financed in part by the Coordencao de Aperfeicoamento de Pessoal de Nivel Superior-Brasil (CAPES) - Finance Code 001 (Process 88887.364537/2019-00).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Recovery of hydrochloric acid and critical raw materials from an effluent of the copper electrorefining process using electromembrane reactors

  • Hernández-Pérez, Lorena
  • Tomaskova, B.
  • Montañés, Maria-Teresa|||0000-0002-2620-6926
  • Pérez-Herranz, Valentín|||0000-0002-4010-0888
  • Martí Calatayud, Manuel César|||0000-0002-0745-1918
[EN] Highly concentrated acids are used to regenerate ion-exchange resins that are applied for the removal of metallic impurities (i.e. antimony, arsenic and bismuth) from spent copper electrorefining baths, thus generating acidic effluents. In this work, the recovery of critical raw materials and HCl from a real effluent is evaluated by electrodeposition using reactors with and without membrane separators. First, four reduction peaks were detected by cyclic voltammetry, and their correspondence to the pairs Cu(II)/Cu(I), As(III)/As, Sb(III)/Sb, Bi(III)/Bi, and Cu (I)/Cu was confirmed by potentiostatic electrodeposition and elemental analysis of the deposits. A high selectivity towards antimony deposition over arsenic and copper was achieved at the least cathodic applied potential (¿ 0.25 VAg/AgCl), obtaining a deposit with 85 wt% of antimony and bismuth as the second most deposited metal. At more cathodic potentials, deposition of copper takes place and the antimony content in the deposits decreases. Galvanostatic electrodeposition tests were carried out using a three-compartment reactor. Results showed that the transport rate of Cl- ions through the anion-exchange membrane is too slow to recover highly concentrated HCl in a separate compartment. However, electrodeposition of the main elements present in the real effluent makes possible obtaining impurity-free HCl (4.8 M) in the cathodic compartment. The complete recovery of antimony (100 %) and almost complete recovery of bismuth (95 %) and copper (90 %) were achieved after 4 h working at ¿ 100 mA¿cm¿ 2. Tests conducted with a single-compartment reactor confirmed that formation of chlorine gas at the anode causes the redissolution of the metals deposited at the cathode, thus revealing that electromembrane reactors improve the electrodeposition current efficiency, The authors thank the financial support from the Agencia Estatal de Investigacion ¿ AEI/10.13039/501100011033) (Spain) under the project PCI2019 103535 and by FEDER A way of making Europe.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Interplay between Forced Convection and Electroconvection during the Overlimiting Ion Transport through Anion-Exchange Membranes: A Fourier Transform Analysis of Membrane Voltage Drops

  • Hernández-Pérez, Lorena
  • Martí Calatayud, Manuel César|||0000-0002-0745-1918
  • Montañés, Maria-Teresa|||0000-0002-2620-6926
  • Pérez-Herranz, Valentín|||0000-0002-4010-0888
[EN] Electrodialysis (ED) applications have expanded in recent years and new modes of operation are being investigated. Operation at overlimiting currents involves the phenomenon of electroconvection, which is associated with the generation of vortices. These vortices accelerate the process of solution mixing, making it possible to increase the transport of ions across the membranes. In this work, frequency analysis is applied to investigate the interaction between different parameters on the development of electroconvection near anion-exchange membranes, which would provide a basis for the development of ED systems with favored electroconvection. Chronopotentiometric curves are registered and Fast Fourier Transform analysis is carried out to study the amplitude of the transmembrane voltage oscillations. Diverse behaviors are detected as a function of the level of forced convection and current density. The synergistic combination of forced convection and overlimiting currents leads to an increase in the signal amplitude, which is especially noticeable at frequencies around 0.1 Hz. Fast Fourier Transform analysis allows identifying, for a given system, the conditions that lead to a transition between stable and chaotic electroconvection modes., This research was funded by the Agencia Estatal de Investigacion (AEI/10.13039/501100011033) (Spain) under the project PCI2019-103535 and by FEDER A way of making Europe.