Skip to main content

MULTIFUNCTIONAL SILICON INTEGRATED NOEMS FOR BROADBAND ACCESS NETWORKS

PCI2022-135003-2

•
Funding agency name Agencia Estatal de Investigación
Funding agency acronym AEI
Program Programa Estatal para Afrontar las Prioridades de Nuestro Entorno
Subprogram Subprograma Estatal de Internacionalización
Call Proyectos Programación Conjunta Internacional
Call year 2022
State Plan 2021-2023 Plan Estatal de Investigación Científica y Técnica y de Innovación
Beneficiary centre UNIVERSITAT POLITÈCNICA DE VALÈNCIA

Resultados relacionados

Resultados totales (Incluyendo duplicados): 4
Encontrada(s) 1 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Dual-mode phonon dynamics and lasing in optomechanical cavities

  • Ortiz-Fernández, Raúl|||0000-0002-4998-0201
  • Martínez, Alejandro|||0000-0001-5448-0140
  • Mas-Arabi, Carlos|||0000-0001-5564-5365
  • Milián Enrique, Carles|||0000-0001-8492-366X
[EN] We use the full nonlinear bifurcation theory as a powerful methodology to thoroughly classify and predict the phonon lasing dynamics in optomechanical cavities. We exemplify its scope in the very relevant and so far vaguely explored dynamics of dual-mode phonon lasing when two independent mechanical modes are directly coupled to one optical field. We uncover a plethora of different lasing regimes in a fixed and realistic cavity geometry, including single- and dual-mode lasing, and an example of chaos. All dynamical regimes are unambiguously associated with bifurcations of different natures, which may exhibit both super- and subcritical natures characterizing the often hysteretic behavior of the systems when they are externally driven by a time-varying laser source. Our results, generalizable to any other optomechanical system, open unprecedented pathways to understand and control the formation and dynamics of optomechanical frequency combs., The authors acknowledge funding from Generalitat Valenciana (GVA, CIACIF/2021/006), HORIZON EUROPE Framework Programme (MAGNIFIC 101091968), Generalitat Valenciana (CIGE/2023/126), and Agencia Estatal de Investigación (ALLEGRO PID2021-124618NB-C21 and MUSICIAN PCI2022-135003-2, CHISTERA IV Cofund 2021). C.M.A. acknowledges funding from the Ministerio de Universidades through the Beatriz Galindo program (BG22/00025).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Influence of thermal effects on the optomechanical coupling rate in acousto-optic cavities

  • Ortiz-Fernández, Raúl|||0000-0002-4998-0201
  • Mercadé, Laura|||0000-0002-4994-7727
  • Grau-Martínez, Alberto|||0000-0002-2411-1317
  • Martínez, Alejandro|||0000-0001-5448-0140
  • Navarro-Urrios, Daniel
[EN] Optomechanical (OM) cavities simultaneously localize photons and phonons, thus enhancing their mutual interaction through radiation-pressure force. This acousto-optic interaction can be quantified by means of the optical-frequency shift per mechanical displacement G . The aforesaid frequency shift can also be related to the vacuum OM coupling rate g 0 , where only photoelastic and moving-boundary effects are commonly taken into account. However, the thermo-optic and thermal-expansion effects may also play a role since the material forming the OM cavity could be heated by the presence of photons, which should naturally affect the mechanical properties of the cavity. In this work, we introduce a theoretical approach to determine how thermal effects change the canonical OM coupling rate. To test the model, a complete set of optical-thermal-mechanical simulations was performed in two OM crystal cavities fabricated from two different materials: silicon and diamond. Our results lead us to conclude that there is a non-negligible thermal correction that is always present as a negative shift to the OM coupling rate that should be considered in order to predict more accurately the strength of the OM interaction., The authors thank J. Maire, N. Capuj, C. Milian, and E. Verhagen for useful discussions. The authors acknowledge funding from Generalitat Valenciana (GVA, CIACIF/2021/006), the European Union ( NextGenerationEU /PRTR and ERDF A way of making Europe ), and the Spanish Ministry of Science and Innovation (MCIN/AEI/10.13039/501100011033) under project Grants No. PID2021-124618NB-C21 (ALLEGRO) and No. PCI2022-135003-2 (MUSICIAN).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Phase-noise and stability comparison of fiber-loop and integrated-waveguide coupling in optomechanical crystal oscillators

  • Ortiz-Fernández, Raúl|||0000-0002-4998-0201
  • Martínez, Alejandro|||0000-0001-5448-0140
  • Mercadé, Laura|||0000-0002-4994-7727
  • Yang, Xinyan
[EN] Optomechanical crystal cavities (OMCCs) display appealing features to function as on-chip photonic microwave oscillators (PMOs) when operated in the phonon lasing regime. Silicon OMCCs have so far demonstrated the best performance in terms of phase noise in a free-running configuration. Some preliminary experiments have also demonstrated that the generated microwave tone can be used for mixing wireless signals compliant with 5G standards. Still, more research is needed to identify the primary noise sources and determine the path towards improvement. Here, we report experiments on the realization of optomechanical PMOs operating at 4 GHz under two different driving conditions of the cavity: light coupling via a tapered fiber loop versus using an adjacent integrated waveguide illuminated by a lensed fiber. We performed measurements of the phase noise and the frequency stability in time of the detected tone for both cases and observed an improvement when the light is coupled by an adjacent integrated waveguide. This can be explained by the fact that the ambientinduced motion and changes due to perturbations in the refractive index of the medium surrounding the fiber loop result in variations of the coupling, which in turn affect the stability of the PMO. These results emphasize the relevance of a mechanically stable coupling technique when using such optomechanical devices in real applications, which can be of particular importance in environments where large vibrations are expected., The authors acknowledge funding from the Spanish State Research Agency under projects ALLEGRO, MUSICIAN, and SLOMO (Grants No. PID2021-124618NB-C21, PCI2022-135003-2, and No. PDC2022-133267-C21). We also acknowledge support from the European Commission under the project MAGNIFIC (Grant 101091968).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Performance Evaluation of Dual-Drive Mach-Zehnder Modulator and Optomechanical Crystal Cavity Comb Generation for All-Optical Band Conversion in 5G-Advanced Cellular Systems

  • Fito-Estevan, Vicente
  • Ortiz-Fernández, Raúl|||0000-0002-4998-0201
  • Maria Morant|||0000-0001-5565-7788
  • Mercadé, Laura|||0000-0002-4994-7727
  • Martínez, Alejandro|||0000-0001-5448-0140
  • Roberto Llorente|||0000-0003-4799-2564
[EN] Multiband operation is a key aspect of emerging 5GAdvanced cellular systems, also named 5.5G, which target seamless provision of multi-gigabit per second connectivity employing sub-6 GHz and mm-wave overlapping coverage. All-optical frequency conversion gives flexibility due to the feasible high-speed reconfiguration in broad bands and large radio signal bandwidth. Optical frequency combs, featuring a spectrum of discrete, equally spaced coherent frequency lines, are crucial for high-precision metrology, spectroscopy, and telecommunications. Their effectiveness in all-optical frequency conversion depends on their stability in terms of frequency drift, phase noise, and power distribution across the comb lines. This paper evaluates experimentally the generation of optical frequency combs employing two distinct technologies: a dual-driven Mach-Zehnder modulator (DD-MZM) and an optomechanical crystal cavity (OMCC), and experimentally compares their performance for all-optical frequency conversion of 5G data streams. The DD-MZM implementation generates a comb with flexible line spacing and comprising several spectrum-flat lines with low phase noise (¿88.5 dBc/Hz at 1 kHz offset and ¿108.3 dBc/Hz at 100 kHz offset). The OMCC implementation provides a reduced footprint (182 µm2) since it is implemented on a silicon chip and has the extra advantage of generating an optical comb without an external local oscillator, which reduces its power requirements (under 1 mW) while providing a phase noise of ¿38.3 dBc/Hz at 1 kHz offset and ¿97.1 dBc/Hz at 100 kHz offset. The polarization stability and jitter of both implementations are also evaluated. The experimental demonstration evaluates the error vector magnitude (EVM) of frequency-converted 3GPP 5G NR signals using both implementations, confirming the successful transmission with EVM smaller than 12.01% for DD-MZM up to, The work of Vicente Fito was supported by UPV under Grant PAID-01-20. The work of Raúl Ortiz was supported by GVA under Grant CIACIF/2021/006. The work of Laura Mercadé was supported in part by Generalitat Valenciana under Grant CIGE/2023/126 and in part by UPV under Grant PAID-06-22. This work was supported in part by Generalitat Valenciana under Grant CIAICO/2021/201 TERAFLEX project and Grant IDIFEDER/2021/061, in part by the Spanish Ministry of Science and Innovation under Grant iPHOEBE PID2023-152410OB-I00, Grant ALLEGRO PID2021-124618NB-C21, and Grant MUSICIAN CHISTERA IV Cofund 2021, and in part by the European Commission under Grant MAGNIFIC HORIZON-CL4-2022-RESILIENCE-01-10101091968. Funding for open access charge provided by Universitat Politècnica de València.