Skip to main content

Resultados relacionados

Resultados totales (Incluyendo duplicados): 5
Encontrada(s) 1 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Studying the influence of surface properties on the cell attachment and anti-fouling capacity of Ag/SiO2 superhydrophobic coatings for building materials

  • Zarzuela, Rafael
  • Carbú, María
  • Moreno-Garrido, Ignacio
  • Diaz, Ana
  • Cantoral, Jesús M.
  • Almoraima Gil, M.L.
  • Mosquera, María J.
  • Domínguez-Rodríguez, Marcia|||0000-0002-0635-0699
[EN] Anti-fouling coatings are a common solution for the protection of porous building materials from the effects of microbial colonization over their functionality and durability. Usually, this is achieved through the incorporation of biocides or the passive control by reducing bioreceptivity. Superhydrophobic surfaces are considered a promising strategy due to their reported capacity for reducing cell adhesion, but their affinity to non-polar substances may decrease their effectiveness under the right circumstances (e.g. organic contamination, cell walls with hydrophobic domains). The combination of these surfaces with active biocides may compensate these drawbacks, however, a close contact with the microorganisms is necessary to promote their effect.This work studies the factors that determine the anti-fouling capacity of a coating, tested on porous building materials, that combines superhydrophobic surface with a nanostructured Ag/SiO2 biocide agent. Special attention is paid to understanding to which extent the cell-surface interactions modulate the initial cell attachment to the surface and the biocidal effect. To this end, the electrostatic forces and surface energy balance were considered using different reference bacteria and a yeast. The results indicate that the hydrophobic character of the surface favors the cell attachment and the biocide agent may be unable to fully compensate this effect for all microorganisms. In addition, changes in micro and nano roughness seem to play an equally significant role. Overall, this study aims to provide a theoretical and experimental insight to assist in the future design of anti-fouling coatings tailored to the organisms responsible of fouling processes., This work has been financed by the Spanish State Research Agency (MCIN/AEI/ 10.13039/501100011033) R&D programs 2020 2021 (Project references: PID2020-115843RB-I00 and PDC2021-121652-I00); This work has been co-financed by the European Union under the 2014 2020 ERDF Operational Programme and by the Department of Economic Transformation, Industry, Knowledge, and Universities of the Regional Government of Andalusia (Project reference: FEDER- UCA18-106613)
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Studying the influence of surface properties on the cell attachment and anti-fouling capacity of Ag/SiO2 superhydrophobic coatings for building materials

  • Zarzuela, Rafael
  • Domínguez, Marcia
  • Carbú, María
  • Moreno-Garrido, Ignacio
  • Diaz, Ana
  • Cantoral, Jesús M.
  • Almoraima Gil, M. L.
  • Mosquera, María J.
Anti-fouling coatings are a common solution for the protection of porous building materials from the effects of microbial colonization over their functionality and durability. Usually, this is achieved through the incorporation of biocides or the passive control by reducing bioreceptivity. Superhydrophobic surfaces are considered a promising strategy due to their reported capacity for reducing cell adhesion, but their affinity to non-polar substances may decrease their effectiveness under the right circumstances (e.g. organic contamination, cell walls with hydrophobic domains). The combination of these surfaces with active biocides may compensate these drawbacks, however, a close contact with the microorganisms is necessary to promote their effect. This work studies the factors that determine the anti-fouling capacity of a coating, tested on porous building materials, that combines superhydrophobic surface with a nanostructured Ag/SiO2 biocide agent. Special attention is paid to understanding to which extent the cell-surface interactions modulate the initial cell attachment to the surface and the biocidal effect. To this end, the electrostatic forces and surface energy balance were considered using different reference bacteria and a yeast. The results indicate that the hydrophobic character of the surface favors the cell attachment and the biocide agent may be unable to fully compensate this effect for all microorganisms. In addition, changes in micro and nano roughness seem to play an equally significant role. Overall, this study aims to provide a theoretical and experimental insight to assist in the future design of anti-fouling coatings tailored to the organisms responsible of fouling processes., This work has been financed by the Spanish State Research Agency (MCIN/AEI/ 10.13039/501100011033) R&D programs 2020–2021 (Project references: PID2020-115843RB-I00 and PDC2021-121652-I00); This work has been co-financed by the European Union under the 2014–2020 ERDF Operational Programme and by the Department of Economic Transformation, Industry, Knowledge, and Universities of the Regional Government of Andalusia (Project reference: FEDER- UCA18-106613), Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Validation of alkoxysilane-based protective treatments for increasing service life of cementitious materials under different weathering conditions

  • Zarzuela, Rafael
  • Luna, Manuel
  • Gemelli, Giada
  • Gonzalez-Coneo, Jorge
  • García-Lodeiro, Inés
  • Blanco-Varela, María Teresa
  • Mosquera, Maria Jesus
Gradual degradation of cementitious materials by exposure to the environment decreases the lifespan of buildings, increasing maintenance andrepair costs. Surface treatments based on alkoxysilanes may prevent weathering effects and repair onset damages, though little attention is paid to how the physical-chemical alterations caused by weathering affect their performance. This work reports a comprehensive characterization/validation of an alkoxysilane-based protective treatment on a mortar subjected to different artificial aging processes (freeze-thaw, thermal cycles, carbonation and chlorides), including measurements of water transport, mechanical properties, reaction products and durability under freeze-thaw and sulfate exposure cycles. Formation of compact silica and C-S-H gel structures decreases porosity and water absorption rate with minimal effect on vapor permeability. Bulk mechanical reinforcement and waterproofing are substantially limited on freeze-thaw aged mortars, whereas surface hardness is barely increased for carbonated mortars. These properties were found to effectively increase the mortar resistance against sulfate and freeze-thaw induced damages., Peer reviewed
RODIN. Repositorio de Objetos de Docencia e Investigación de la Universidad de Cádiz
Publication Artículo científico (JournalArticle)

Studying the influence of surface properties on the cell attachment and anti-fouling capacity of Ag/SiO2 superhydrophobic coatings for building materials

  • Zarzuela Sánchez, Rafael
  • Domínguez, Marcia
  • Carbú Espinosa de los Monteros, María
  • Moreno-Garrido, Ignacio
  • Díaz Sánchez, Ana Belén
  • Cantoral Fernández, Jesús Manuel
  • Gil Montero, María Luisa Almoraima
  • Mosquera Díaz, María Jesús
Anti-fouling coatings are a common solution for the protection of porous building materials from the effects of microbial colonization over their functionality and durability. Usually, this is achieved through the incorporation of biocides or the passive control by reducing bioreceptivity. Superhydrophobic surfaces are considered a promising strategy due to their reported capacity for reducing cell adhesion, but their affinity to non-polar substances may decrease their effectiveness under the right circumstances (e.g. organic contamination, cell walls with hydrophobic domains). The combination of these surfaces with active biocides may compensate these drawbacks, however, a close contact with the microorganisms is necessary to promote their effect. This work studies the factors that determine the anti-fouling capacity of a coating, tested on porous building materials, that combines superhydrophobic surface with a nanostructured Ag/SiO2 biocide agent. Special attention is paid to understanding to which extent the cell-surface interactions modulate the initial cell attachment to the surface and the biocidal effect. To this end, the electrostatic forces and surface energy balance were considered using different reference bacteria and a yeast. The results indicate that the hydrophobic character of the surface favors the cell attachment and the biocide agent may be unable to fully compensate this effect for all microorganisms. In addition, changes in micro and nano roughness seem to play an equally significant role. Overall, this study aims to provide a theoretical and experimental insight to assist in the future design of anti-fouling coatings tailored to the organisms responsible of fouling processes.
RODIN. Repositorio de Objetos de Docencia e Investigación de la Universidad de Cádiz
Publication Artículo científico (JournalArticle)

Water-soluble fluorosilane supplemented with fumed silica as admixture for producing hydrophobic concrete: Effects on cement hydration, mechanical properties and water protection properties

  • González-Coneo, Jorge
  • Zarzuela Sánchez, Rafael
  • Luna Aguilera, Manuel Jesús
  • Mosquera Díaz, María Jesús
Hydrophobic admixtures protect concrete from water-related degradation, although they may have negative effects over cement hydration, mechanical properties and have low miscibility with water. Aiming to overcome these drawbacks, this work studies the properties of concretes containing admixtures based on a water-soluble fluoroalkylsilane and fumed silica to densify the structure. The effects of the admixture were evaluated in terms of hydrophobic, mechanical and chemical properties. The admixture decreased capillary absorption by over 70% while also increasing the internal cohesion, despite an increased porosity. Raman and XRD analysis indicated it promoted the consumption of C3S and the formation of portlandite and C–S–H gels with higher silicon content, compensating the effect of porosity on the concrete resistance. Incorporation of fumed silica in the admixture delayed the early development of hydrated phases, but after full curing promoted a more compact structure of the cement matrix, decreasing water absorption rate and improving mechanical properties.