Skip to main content

Resultados relacionados

Resultados totales (Incluyendo duplicados): 4
Encontrada(s) 1 página(s)

Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Metal Propionate Solutions for High-Throughput Liquid-Assisted Manufacturing of Superconducting REBaCuO (RE = Y, Gd, Sm, and Yb) Films

  • Saltarelli, Lavinia|||0000-0001-7519-2981
  • Sanchez-Rodriguez, Daniel
  • Gupta, Kapil|||0000-0002-4826-6620
  • Kethamkuzhi, Aiswarya
  • Farjas Silva, Jordi|||0000-0002-4093-9843
  • Molins Grau, Elies|||0000-0003-1012-0551
  • Yáñez, Ramón|||0000-0002-2021-0924
  • Ricart, Susana|||0000-0003-4196-2081
  • Obradors, Xavier|||0000-0003-4592-7718
  • Puig, Teresa
The cost-effective synthesis of a series of metal propionate powders (copper, yttrium, barium, samarium, gadolinium, and ytterbium) is developed through single chemical reactions resulting in five novel crystalline forms. These complexes are valuable precursors for the preparation of epitaxial REBaCuO (REBCO) superconducting films (here, RE = Y, Sm, Gd, and Yb) through the innovative transient liquid-assisted growth (TLAG) process based on chemical solution deposition (CSD). TLAG-CSD shows impressive results with YBaCuO (YBCO), obtaining critical current densities of 2.6 MA/cm 2 (77 K) on 500 nm films at unprecedented growth rates (50-2000 nm/s), boosting unprecedented high-throughput industrial production. With a cardinal concern on designing the pyrolysis toward optimal nanocrystalline films for TLAG, an analysis of the thermal behavior of the synthesized precursors is essential. Decomposition pathways for each metal propionate are established, and compatibility with TLAG-CSD is corroborated. Metal-organic solutions for these REBCO systems are successfully prepared, and their rheological properties and thermal behavior are analyzed. This work demonstrates homogeneous nanocrystalline films through propionate-based REBCO precursor solutions, including several rare-earth ions, which display exemplary chemical and microstructural characteristics crucial for TLAG, and provides a base for a wide variety of CSD-based functional oxides.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Metal Propionate Solutions for High-Throughput Liquid-Assisted Manufacturing of Superconducting REBa2Cu3O7-δ (RE = Y, Gd, Sm, and Yb) Films

  • Saltarelli, Lavinia
  • Sanchez Rodríguez, Daniel
  • Gupta, Kapil
  • Kethamkuzhi, Aiswarya
  • Farjas, Jordi
  • Molins, Elies
  • Yáñez, Ramón
  • Ricart, Susagna
  • Obradors, Xavier
  • Puig Molina, Teresa
The cost-effective synthesis of a series of metal propionate powders (copper, yttrium, barium, samarium, gadolinium, and ytterbium) is developed through single chemical reactions resulting in five novel crystalline forms. These complexes are valuable precursors for the preparation of epitaxial REBa2Cu3O7-δ (REBCO) superconducting films (here, RE = Y, Sm, Gd, and Yb) through the innovative transient liquid-assisted growth (TLAG) process based on chemical solution deposition (CSD). TLAG-CSD shows impressive results with YBa2Cu3O7-δ (YBCO), obtaining critical current densities of 2.6 MA/cm2 (77 K) on 500 nm films at unprecedented growth rates (50-2000 nm/s), boosting unprecedented high-throughput industrial production. With a cardinal concern on designing the pyrolysis toward optimal nanocrystalline films for TLAG, an analysis of the thermal behavior of the synthesized precursors is essential. Decomposition pathways for each metal propionate are established, and compatibility with TLAG-CSD is corroborated. Metal-organic solutions for these REBCO systems are successfully prepared, and their rheological properties and thermal behavior are analyzed. This work demonstrates homogeneous nanocrystalline films through propionate-based REBCO precursor solutions, including several rare-earth ions, which display exemplary chemical and microstructural characteristics crucial for TLAG, and provides a base for a wide variety of CSD-based functional oxides., Authors acknowledge the European Research Council for the ULTRASUPERTAPE project (ERC-2014-ADG-669504), IMPACT project (ERC-2019-PoC-8749), SMS-INKS (ERC-2022-PoC-101081998), and EU COST actions OPERA (CA20116) and SUPERQUMAP (CA-21144). Also acknowledged is the financial support from the Spanish Ministry of Science and Innovation and the European Regional Development Fund, MCIU/AEI/FEDER for SUPERENERTECH (PID2021-127297OB-C21), “Severo Ochoa” Programs for Centers of Excellence in R&D (FUNFUTURE CEX2019-000917-S and Matrans42 CEX2023-001263-S), and HTS-JOINTS (PDC2022-133208-I00), PTI+ TransEner CSIC program for Spanish NGEU (Regulation (EU) 2020/2094). They also thank the Catalan Government for 2021 SGR 00440. L.S. and A.K. acknowledge financial support from the Spanish Ministry of Science, Innovation, and Universities through the FPI grant PRE2019-090621 and PRE2020-091817, respectively. D.S.R. acknowledges the support received from the Beatriu de Pinós Programme and the Ministry of Research and Universities of the Government of Catalonia (Fellowship BP00069). Authors thank the Scientific Services at ICMAB, ICN2 Electron Microscopy Division, and Scientific Services at the University of Girona. Authors acknowledge the use of instrumentation as well as the technical advice provided by the Joint Electron Microscopy Center at ALBA (JEMCA) and funding from Grant IU16-014206 (METCAM-FIB) to ICN2 funded by the European Union through the European Regional Development Fund (ERDF), with the support of the Ministry of Research and Universities, Generalitat de Catalunya. Part of the content of this manuscript is object of a European patent, application no. PCT/EP2023/070988 filed on 28/07/2023., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2019-000917-S). With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2023-001263-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Role of Liquid Composition in the Transient Liquid Assisted Growth of Superconducting YBa2Cu3O7-δ Films

  • Saltarelli, Lavinia
  • García Franco, Diana
  • Soler, Laia
  • Pach, Elzbieta
  • Gupta, Kapil
  • Sánchez Rodríguez, Daniel
  • Aguilar, Jordi
  • Fuentes, Víctor
  • Solano, Eduardo
  • Mocuta, Cristian
  • Farjas, Jordi
  • Obradors, Xavier
  • Puig Molina, Teresa
The unparalleled loss-less electrical current conduction of high-temperature superconducting (HTS) materials encourages research on YBa2Cu3O7-𝛿 (YBCO) to unravel opportunities toward numerous applications. Nonetheless, production costs and throughput of the commercialized HTS Coated Conductors (CCs) are still limiting a worldwide spread. Transient liquid assisted growth (TLAG) is a non-equilibrium process displaying ultrafast growth rate which, when combined with chemical solution deposition (CSD), is emerging as a strong candidate to reduce the cost/performance ratio of YBCO superconductors. This study explores the influence of the (Ba:Cu) molar ratio of the transient liquid composition on the nucleation and growth mechanisms of TLAG. This enables an in-depth analysis of the critical role of the yttrium supersaturation in the transient liquids considering the out-of-equilibrium kinetic character of TLAG. Advanced characterization techniques, including in situ synchrotron X-ray diffraction, coupled to a multi-parameter analysis of the contributions to the physical performance, elucidate the influence of transient liquid supersaturation as driving force toward YBCO nucleation and growth. Understanding the fundamental role played by the initial ink composition allows to disentangle how to reach high superconducting performance. The fabrication of high-performance YBCO films through this novel, high-throughput growth methodology promotes the use of HTS materials in large scale power applications., Authors acknowledge the European Research Council for the ULTRASUPERTAPE project (ERC-2014-ADG-669504), IMPACT project (ERC-2019-PoC-8749), SMS-INKS (ERC-2022-PoC-101081998), and EU COST actions OPERA (CA20116) and SUPERQUMAP (CA-21144). Also acknowledged is the financial support from the Spanish Ministry of Science and Innovation and the European Regional Development Fund, MCIU/AEI/FEDER for SUPERENERTECH (PID2021-127297OB-C21), “Severo Ochoa” Programs for Centers of Excellence in R&D (FUNFUTURE CEX2019-000917-S and Matrans42 CEX2023-001263-S), and HTS-JOINTS (PDC2022-133208-I00), PTI+ TransEner CSIC program for Spanish NGEU (Regulation (EU) 2020/2094) and REBCOTLAG (PID2021-127297OB-C22). They also thank the Catalan Government for 2021 SGR 00440. L.S. and D.G. acknowledge financial support from Spanish Ministry of Science, Innovation, and Universities through the FPI grant PRE2019-090621 and PRE2018-084537, respectively. D.S.R. acknowledges the support received from the Beatriu de Pinós Programme and the Ministry of Research and Universities of the Government of Catalonia (Fellowship BP00069). E.P. acknowledges the Juan de la Cierva Incorporación Grant IJC2020-045520-I funded by MCIN/AEI/10.13039/501100011033 and by “European Union NextGenerationEU/PRTR”. Authors thank the Scientific Services at ICMAB, ICN2 Electron Microscopy Division, and Scientific Services at the University of Girona. Authors acknowledge the use of instrumentation as well as the technical advice provided by the Joint Electron Microscopy Center at ALBA (JEMCA) and funding from Grant IU16-014206 (METCAM-FIB) to ICN2 funded by the European Union through the European Regional Development Fund (ERDF), with the support of the Ministry of Research and Universities, Generalitat de Catalunya. Moreover, authors acknowledge SOLEIL Synchrotron and ALBA Synchrotron for the provision of radiation facilities and are grateful for the assistance received when conducting experiments at DiffAbs and NCD-SWEET Beamlines., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2019-000917-S)., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2023-001263-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Exploring the overdoping effects in Transient Liquid Assisted Grown YBa[Formula: see text]Cu[Formula: see text]O[Formula: see text] superconducting films

  • Kethamkuzhi, Aiswarya
  • Saltarelli, Lavinia
  • Gupta, Kapil
  • Torres, Carla
  • García, Diana
  • Gutiérrez, Joffre
  • Obradors, Xavier
  • Puig Molina, Teresa
The data that support the findings of this study will be made available at the institutional repository “digital.csic” upon reasonable request., The enhancement of the current-carrying capabilities of cuprate materials depends highly on the knowledge of how to tweak their doping state. The recent efforts on overdoping YBa[Formula: see text]Cu[Formula: see text]O[Formula: see text] (YBCO) to push the limit of critical current density towards the depairing critical current density are also based on the study of their doping state. We present the overdoping study of Transient Liquid Assisted Grown YBCO films through various oxygenation strategies, including oxygen-ozone mixtures and Ag surface-decoration layers. We systematically analyze how the key kinetic parameters, such as temperature, dwell time, ozone concentration, and surface modification, influence the oxygen content and superconducting properties of the films. Our results provide insights into achieving the overdoped regime in TLAG YBCO and offer a comparison with films grown via the Pulsed Laser Deposition (PLD) method. This study of overdoping on the TLAG YBCO films, which compares three distinct oxygenation methods and conducts an unprecedented analysis of the ozone-assisted process, promises a substantial enhancement in REBa[Formula: see text]Cu[Formula: see text]O[Formula: see text] (REBCO, RE = rare earth elements) fabrication., Open Access funding provided thanks to the CRUE-CSIC agreement with Springer Nature. Authors acknowledge the European Research Council for the ULTRASUPERTAPE project (ERC-2014-ADG-669504), IMPACT project (ERC-2019-PoC-8749), SMS-INKS (ERC-2022-PoC-101081998), and EU COST actions OPERA (CA20116) and SUPERQUMAP (CA-21144). Also acknowledged is the financial support from the Spanish Ministry of Science and Innovation and the European Regional Development Fund, MCIU/AEI/FEDER for SUPERENERTECH (PID2021-127297OB-C21), “Severo Ochoa” Programs for Centers of Excellence in R&D (FUNFUTURE CEX2019-000917-S and Matrans42 CEX2023-001263-S), and HTS-JOINTS (PDC2022-133208-I00), PTI+ TransEner CSIC program for Spanish NGEU (Regulation (EU) 2020/2094). We also acknowledge the funding from Grant IU16-014206 (METCAM-FIB) to ICN2 funded by the European Union through the European Regional Development Fund (ERDF), with the support of the Ministry of Research and Universities, Generalitat de Catalunya. We also thank the Catalan Government for 2021 SGR 00440. A.K, L.S, D.G, and C.T would like to acknowledge the financial support from the Spanish Ministry of Science, Innovation and Universities through the FPI grants PRE2020-091817, PRE2019-090621, PRE2018-084537, and PRE2022-102078, respectively., With funding from the Spanish government through the "Severo Ochoa Centre of Excelence" accreditation (CEX2019-000917-S), With funding from the Spanish government through the "Severo Ochoa Centre of Excelence" accreditation (CEX2023-001263-S), Peer reviewed