DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication
Artículo científico (JournalArticle)
Impact of modulating the molecular weight on the structural features and final properties of PLA aerogels
13 páginas, 13 figuras, 4 tablas, Achieving precise control over structural parameters is crucial for optimizing the performance of bio-based
aerogels in energy-related applications. In this work, we investigate the influence of molecular weight and
concentration on the development of sustainable polylactic acid (PLA)-based aerogels tailored for thermal
insulation. The effects on density, porosity, crystallinity, morphology of the porous structure, mechanical
strength, and thermal conductivity were systematically analyzed. It was observed that higher molecular weight
PLA can reduce shrinkage during the drying step, leading to lighter aerogels. The relationship between chain
mobility (governed by the solution viscosity) and molecular weight was found to be key in governing the
microstructure morphology. Sound speed measurements revealed significant variations in the structural factor
(g), which are intrinsically associated with the material's solid tortuosity, and thus in the mechanical and thermal
properties. The elastic modulus and compressive strength increased by up to 170 % and 63 % in samples with
densities of ca. 100 kg/m3 and 140 kg/m3, respectively, when the molecular weight was increased from 138 to
175 kDa. Furthermore, all aerogels maintained low thermal conductivities (~30 mW/m⋅K), and some of them
showed values clearly below 30 mW/m⋅K, owing to a reduction in various heat transfer mechanisms resulting
from modifications in key structural parameters, such as porosity and pore size. These findings provide a scalable
strategy to engineer bio-based, low-density, and mechanically robust PLA aerogels with stable thermal proper-
ties, advancing their deployment as sustainable alternatives to fossil-based insulation materials in clean energy
and environmental technologies., Financial support from Ministry of Science, Innovation and Univer-
sities of Spain and European Regional Development Fund (PID2024-
157392OB-I00), and from Ministry of Science, Innovation and Univer-
sities of Spain and European Union NextGenerationEU/PRTR
(PDC2025-165502-I00) is gratefully acknowledged, Peer reviewed