Skip to main content

Resultados relacionados

Resultados totales (Incluyendo duplicados): 3
Encontrada(s) 1 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Influence of Zn(NO3)2 concentration during the ZnO electrodeposition on TiO2 nanosponges used in photoelectrochemical applications

  • Navarro-Gázquez, Pedro José
  • Solsona-Espriu, Benjamín
  • Fernández-Domene, Ramón Manuel
  • Sánchez Tovar, Rita
  • Garcia-Anton, Jose
  • Blasco-Tamarit, E.|||0000-0001-7314-082X
  • Muñoz-Portero, María-José|||0000-0002-7407-2598
[EN] TiO2/ZnO hybrid nanostructures were formed by electrochemical anodization of titanium and subsequently ZnO electrodeposition. Different Zn(NO3)(2) concentrations were used for electrodeposition (10-60 mM). A structural, morphological, and compositional characterisation was performed using FE-SEM, TEM, AFM, XRD, UV-Visible spectroscopy, and band gap measurements. It was reported that the morphology of the nanostructures changed with the Zn(NO3)2 concentration. Nanosponges were observed for concentrations from 10 mM to 30 mM whereas at 40 mM the morphology changed to well-defined ZnO hexagonal nanorods. At 50 mM a surface covered by ZnO with undefined rods could be seen and, at 60 mM, a morphology of nanoplatelets was observed. Besides, as Zn (NO3)2 concentration increased, the ZnO amount, the roughness, and the ZnO crystalline size also increased, while the band gap decreased. Electrochemical characterisation of nanostructures was performed by water splitting, stability to photocorrosion, EIS, and Mott-Schottky tests. The optimal samples were TiO2/ZnO hybrid nanostructures electrodeposited with 30 mM Zn(NO3)(2), since they were stable against photocorrosion and, compared to TiO2 nanosponges, showed an increase in photoelectrochemical activity of 204%, a lower resistance to charge transfer, and a higher donor density. Overall, the most efficient samples presented an intermediate Znloading because of a maximization of the TiO2-ZnO interaction and the prevention of the formation of non interacting ZnO structures., The authors would like to thank the financial support to the "Agencia Estatal de Investigacion" (PID2019-105844RB-I00/MCIN/AEI/10.13039/501100011033) and the co-finance by the "European Social Fund". The authors also thank the "Generalitat Valenciana" for its help in the Atomic Force Microscope acquisition (IDIFEDER/2018/044). Pedro Jose Navarro Gazquez wants to show his gratitude for the GRANT PEJ2018-003596-A-AR funded by MCIN/AEI/10.13039/501100011033 and by "ESF Investing in your future". Authors from UV also thank MINECO (MAT2017-84118-C2-1-R project) and FEDER for funding. SCSIE from UV is also acknowledged for TEM and XRD measurements.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Characterization and Comparison of WO3/WO3-MoO3 and TiO2/TiO2-ZnO Nanostructures for Photoelectrocatalytic Degradation of the Pesticide Imazalil

  • Cifre-Herrando, Mireia|||0000-0002-8800-3585
  • Muñoz-Portero, María-José|||0000-0002-7407-2598
  • Blasco-Tamarit, E.|||0000-0001-7314-082X
  • Garcia-Anton, Jose|||0000-0002-0289-1324
  • Roselló-Márquez, Gemma
  • Navarro Gázquez, Pedro José
[EN] Tungsten oxide (WO3) and zinc oxide (ZnO) are n-type semiconductors with numerous applications in photocatalysis. The objective of this study was to synthesize and characterize different types of nanostructures (WO3, WO3-Mo, TiO2, and TiO2-ZnO) for a comparison of hybrid and pure nanostructures to use them as a photoanodes for photoelectrocatalytic degradation of emerging contaminants. With the aim of comparing the properties of both samples, field emission scanning electron microscopy (FE-SEM) and confocal laser-Raman spectroscopy were used to study the morphology, composition, and crystallinity, respectively. Electrochemical impedances, Mott-Schottky, and water splitting measurements were performed to compare the photoelectrochemical properties of photoanodes. Finally, the photoelectrocatalytic degradation of the pesticide Imazalil was carried out with the best optimized nanostructure (TiO2-ZnO)., This research was funded by AEI (PID2019-105844RB-I00/AEI/10.13039/501100011033) and the project co-funded by FEDER operational program 2014¿2020 of Comunitat Valenciana (IDIFEDER/18/044). M.C.-H. received financial support from Ministerio de Universidades of the predoctoral grant (FPU19/02466). G.R.-M. received financial support from the UPV of a post-doctoral grant (PAID-10-21). P.J.N.-G. received support thanks the grant PEJ2018-003596-A-AR funded by MCIN/AEI/10.13039/501100011033. Finally, project co-funded by FEDER operational programme 2014-2020 of Comunitat Valenciana (IDIFEDER/18/044) is acknowledged.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Original Approach to Synthesize TiO2/ZnO Hybrid nanosponges used as photoanodes for photoelectrochemical applications

  • Navarro-Gázquez, Pedro José
  • Sánchez-Tovar, Rita
  • Fernández-Domene, Ramón Manuel
  • Muñoz-Portero, María-José|||0000-0002-7407-2598
  • Blasco-Tamarit, E.|||0000-0001-7314-082X
  • Garcia-Anton, Jose|||0000-0002-0289-1324
[EN] In the present work, TiO2/ZnO hybrid nanosponges have been synthesized for the first time. First, TiO2 nanosponges were obtained by anodization under hydrodynamic conditions in a glycerol/water/NH4F electrolyte. Next, in order to achieve the anatase phase of TiO2 and improve its photocatalytic behaviour, the samples were annealed at 450 degrees C for 1 h. Once the TiO2 nanosponges were synthesized, TiO2/ZnO hybrid nanosponges were obtained by electrodeposition of ZnO on TiO2 nanosponges using different temperatures, times, and concentrations of zinc nitrate (Zn(NO3)(2)). TiO2/ZnO hybrid nanosponges were used as photoanodes in photoelectrochemical water splitting tests. The results indicate that the photoelectrochemical response improves, in the studied range, by increasing the temperature and the Zn(NO3)(2) concentration during the electrodeposition process, obtaining an increase in the photoelectrochemical response of 141% for the TiO2/ZnO hybrid nanosponges electrodeposited at 75 degrees C with 10 mM Zn(NO3)(2) for 15 min. Furthermore, morphological, chemical, and structural characterization was performed by Field Emission Scanning Electron Microscopy (FE-SEM) with Energy Dispersive X-Ray spectroscopy (EDX), Raman Confocal Laser Spectroscopy, X-Ray Photoelectron Spectroscopy (XPS), and Grazing Incidence X-Ray Diffraction (GIXRD)., The authors would like to express their gratitude for the financial support of the Agencia Estatal de Investigación (PID2019-105844RB-I00/MCIN/AEI/10.13039/501100011033), for the co-finance by the European Social Fund, and for its help in the Laser Raman Microscope acquisition (UPOV08-3E-012). Pedro José Navarro Gázquez also thanks the Grant PEJ2018-003596-A-AR funded by MCIN/AEI/10.13039/501100011033 and by ESF Investing in your future.