Skip to main content

Resultados relacionados

Resultados totales (Incluyendo duplicados): 3
Encontrada(s) 1 página(s)

DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

LitMod2D_2.0: An Improved Integrated Geophysical-Petrological Modeling Tool for the Physical Interpretation of Upper Mantle Anomalies

  • Kumar, Ajay
  • Fernández Ortiga, Manel
  • Jimenez-Munt, Ivone
  • Torné, Montserrat
  • Vergés Masip, Jaume
  • Afonso, Juan Carlos
LitMod2D_2.0 can be downloaded from https://doi.org/10.20350/digitalCSIC/9063 or GitHub https://github.com/ajay6763/LitMod2D_2.0_package_dist_users., LitMod2D integrates geophysical and petrological data sets to produce the thermal, density, and seismic velocity structure of the lithosphere and upper mantle. We present a new LitMod2D_2.0 package with improvements focused on (i) updated anelastic attenuation correction for anharmonic seismic velocities, (ii) chemical composition in the sublithospheric mantle, and (iii) incorporation of sublithospheric mantle anomalies. Sublithospheric mantle anomalies can be defined with different chemical composition, temperature, seismic velocities, and a combination of them, allowing the application of LitMod2D_2.0 to regions affected by mantle upwelling, subduction, delamination, and metasomatism. We demonstrate the potential application of LitMod2D_2.0 to such regions and the sensitivity of thermal and compositional anomalies on density and seismic velocities through synthetic models. Results show nonlinearity between the sign of thermal and seismic velocity anomalies, and that S wave velocities are more sensitive to temperature whereas P wave velocities are to composition. In a synthetic example of subduction, we show the sensitivity of sublithospheric mantle anomalies associated with the slab and the corner flow on surface observables (elevation, geoid height, and gravity anomalies). A new open-source graphic user interface is incorporated in the new package. The output of the code is simplified by writing only the relevant physical parameters (temperature, pressure, material type, density, and seismic velocities) to allow the user using predefined post-processing codes from a toolbox (flexure, mineral assemblages, synthetic passive seismological data, and tomography) or designing new ones. We demonstrate a post-processing example calculating synthetic seismic tomography, Rayleigh surface-wave dispersion curves, and P wave receiver functions from the output file of LitMod2D_2.0. © 2020. The Authors., This work has been supported by EU Marie Curie Initial Training Network (SUBITOP) (674899-SUBITOP-H2020-MSCA-ITN-2015), the Agencia Estatal de Investigación through projects MITE (CGL2014-59516) and GeoCAM (PGC2018-095154-B-100), and the Agency for Management of University and Research Grants of Catalonia (AGAUR-2017-SGR-847). Thermodynamic databases used can be found in cited references (Afonso & Zlotnik,?2011; Stixrude & Lithgow-Bertelloni,; Xu et al.,). We thank two anonymous reviwers for insightful comments and suggestions on an earlier version of this manuscript. We also thank F. Salajeghegh for sharing his GUI matlab routines. This work has been done using the facilities of the Laboratory of Geodynamic Modeling from ICTJA-CSIC. JCA's work is supported by ARC Linkage Project LP170100233 and ARC Discovery Project DP190102940. LitMod2D_2.0 can be downloaded from https://doi.org/10.20350/digitalCSIC/9063 or GitHub https://github.com/ajay6763/LitMod2D_2.0_package_dist_users., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Flexural-isostatic reconstruction of the Western Mediterranean during the Messinian Salinity Crisis: Implications for water level and basin connectivity

  • Heida, Hanneke
  • Raad, Fadl
  • García-Castellanos, Daniel
  • Jimenez-Munt, Ivone
  • Maillard, Agnès
  • Lofi, J.
During the Messinian Salinity Crisis (MSC, 5.97–5.33 Ma), thick evaporites were deposited in the Mediterranean Sea associated with major margin erosion. This has been interpreted by most authors as resulting from water level drop by evaporation but its timing, amplitude and variations between subbasins are poorly constrained due to uncertainty in post-Messinian vertical motions and lack of a clear time-correlation between the marginal basin and offshore records. The Balearic Promontory and surrounding basins exemplify a range of responses to this event, from margin erosion to up to a kilometre thick Messinian units in the abyssal areas containing the majority of the MSC halite. The Balearic Promontory contains unique patches of halite with thickness up to 325 m at intermediate depths that provide valuable information on water level during the stage of halite deposition. We compile seismic markers potentially indicating ancient shorelines during the drawdown phase: the first is marked by the transition from the MES to UU based on seismic data. The second is the limit between the bottom erosion surface (BES) and abyssal halite deposits. We restore these shorelines to their original depth accounting for flexural isostasy and sediment compaction. The best-fitting scenario involves a water level drop of ca. 1,100 ± 100 m for the Upper unit level and 1,500 ± 100 m for the BES level. According to our results, halite deposition began in the Central Mallorca Depression at 1,300–1,500 m depth, perched hundreds of metres above the deep basins, which were at 1,500–1,800 m (Valencia Basin) and >2,900 m (Algerian Basin). The hypothesis that erosion surfaces were formed subaerially during the drawdown phase is consistent with a model of halite deposition before/during the water level drop of at least 1,000 m, followed by the deposition of the Upper unit until the MSC is terminated by the reinstatement of normal marine conditions., Funding was provided by the European Commission through ITN SaltGiant (Horizon2020-765256) and partly by GeoCAM (PGC2018-095154-B-100), Spanish Government. This work was done using the facilities of the Laboratory of Geodynamic Modelling at Geo3BCN-CSIC., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Four decades of geophysical research on Iberia and adjacent margins

  • Diaz, J.
  • Torné, Montserrat
  • Vergés Masip, Jaume
  • Jimenez-Munt, Ivone
  • Martí Molist, Joan
  • Carbonell, Ramón
  • Schimmel, Martin
  • Geyer, Adelina
  • Ruiz Fernández, Mario
  • García-Castellanos, Daniel
  • Alvarez-Marrón, Joaquina
  • Brown, Dennis
  • Villaseñor, Antonio
  • Ayala, C.
  • Palomeras, Imma
  • Fernández Ortiga, Manel
  • Gallart Muset, Josep
The dimensions, the geographical position and the complex geological history of the Iberian Peninsula makes it a unique and singular target to study its crustal and upper mantle structure and geodynamical evolution using geophysical methods. The lithospheric structure beneath Iberia has been investigated since the 1970’s using deep multichannel seismic reflection and refraction/wide-angle reflection profiling. Gravimetric and magnetic data were acquired following the deployment of permanent and temporary stations, mostly during the 1990’s. Beginning in the late 1990’s, the progressive use of Global Navigation Satellite Systems (GNSS) instruments contributed to monitor the present-day motions. During the last decades, numerous geological and geophysical surveys have investigated the Iberian lithosphere and upper mantle in the onshore and offshore regions, the most recent ones related to the TopoIberia project. The approach developed in this contribution is twofold. Firstly, we summarize the available geophysical information over Iberia, from focusing on the upper crust to the lithosphere-asthenosphere boundary and the transition zone marking the bottom of the upper mantle. Results of GNSS data, potential fields, controlled source seismic profiles, magnetotelluric data, body and surface wave tomography, receiver functions and 2D and 3D lithospheric modeling are reviewed and compared. Secondly, we focus on the areas of greater geodynamic interest and the regions where inconsistencies within the geophysical results, or contradictions in their tectonic interpretation exist, identifying the major questions that are still under debate. Besides shedding light to the state of knowledge and pointing out present-day research challenges, this review provides a tool for the integration of the diverse geophysical datasets with the surface geology and geodynamical processes that are interpreted to have built the complex geology of the Iberian Peninsula., The authors acknowledge funding from the Generalitat de Catalunya, grant/awards number AGAUR 2017SGR1022, and AGAUR 2017SGR847, the Spanish Ministry of Science, Innovation, and Universities grant numbers RTI2018-095594-B-I00, PGC2018-095154-B-100 and PGC2018-094227-B-I00 and the Spanish Ministry of Economy and Competitiveness grant numbers CGL2017-84901-C2 and PIE-CSIC-201830E039. IP is funded by the Spanish Ministry of Science, Innovation, and Universities and University of Salamanca grant BEAGAL18/00090. AV acknowledges funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2019-000928-S)., Peer reviewed