Skip to main content

HACIA EL BIOSENSADO HOLOGRAFICO AVANZADO

PID2019-110713RB-I00

•
Funding agency name Agencia Estatal de Investigación
Funding agency acronym AEI
Program Programa Estatal de I+D+i Orientado a los Retos de la Sociedad
Call Proyectos de I+D+i (Generación de Conocimiento y Retos Investigación)
Call year 2019
State Plan 2017-2020 Plan Estatal de Investigación Científica y Técnica y de Innovación
Beneficiary centre UNIVERSITAT POLITÈCNICA DE VALÈNCIA

Resultados relacionados

Resultados totales (Incluyendo duplicados): 33
Encontrada(s) 1 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Highly sensitive homogeneous-heterogeneous nanogold-based microimmunoassays for multi-residue screening of pesticides in drinking water

  • Dobosz, P.
  • Puchades, Rosa|||0000-0002-9329-1593
  • Morais, Sergi|||0000-0002-3722-2358
  • Maquieira, Angel|||0000-0003-4641-4957
[EN] A homogeneous-heterogeneous immunoassay based on the use of antibody modified gold nanoparticles, 5 and 50 nm in diameter, is developed with and without signal amplification. The assays involve the capture of the target analytes in the homogeneous phase and subsequent detection of the immunoreaction product, following a heterogeneous scheme performed on a regular DVD. The analytical approach was evaluated developing multiplexed competitive immunoassays for the determination of residues of the pesticides chlorpyrifos and azoxystrobin as model targets. The results revealed that homogeneous immunocapture strategy improves considerably the assay performance, giving better assay sensitivity when compared to the standard heterogeneous immunoassay format. Under the best conditions, the least detectable level for chlorpyrifos and azoxystrobin were 0.1 ¿g/L. The immunoassays were also highly selective, showing little or no cross-reactivity with other structurally similar compounds. The immunocapture approach was assessed by the analysis of water. The analytical sensitivity was compared with that of reference chromatographic methods, and recovery results agreed. The good recoveries obtained (mean values ranging between 80% and 125%) make this strategy a suitable screening biosensing methodology for either environmental monitoring or laboratory quantification of pesticide residues without sample treatment in a maximum time of 65 min at lower cost., S.M awards grants PID2019-110713RB-I00 funded by MCIN/AEI/ 10.13039/501100011033 and by ERDF A way of making Europe. PROMETEO/2020/094, Proyecto 88/2021 Nominativa Accion 2021-12. Dr. A. Abad-Fuentes kindly provided the anti-azoxystrobin antibody and the corresponding coating conjuagte.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

DNA -based hydrogels for high-performance optical biosensing application

  • Zezza, Paola
  • Lucío, María Isabel|||0000-0001-7404-352X
  • Maquieira, Angel|||0000-0003-4641-4957
  • Bañuls Polo, María-José|||0000-0002-2422-7731
[EN] Analyte-sensitive DNA-based hydrogels find multiple applications in the field of biosensors due to their adaptable nature. Here, the design of DNA-based hydrogel and its application as sensing platform for the detection of a specific target sequence are presented. DNA-functionalized hydrogel structures were formed via a free radical co-polymerization process. A simple one-step probe immobilization procedure is reported: DNA probe molecules are added to the photoactive polymer mixture, dispensed onto a solid support, or a mold, and covalently attached while the hydrogel is formed through UV light exposure. Such hydrogels can be synthesized with desired recognition ability through the selection of a certain nucleotide sequence. Here we show the application of DNA -based hydrogel to detect the target with high performance in fluorescence microarray format and, additionally, to fabricate holographic surface relief gratings for label-free sensing assays., This work was financially supported by the E.U. FEDER, the Spanish Ministry of Economy and Competitiveness MINECO (ADBIHOLPID2019-110713RB-I00) and Generalitat Valenciana (PROMETEO/2020/094). M. I. Lucio acknowledges MINECO for her Juan de la Cierva Formacion and Incorporacion grants (FJCI-2016-29593, IJC 2018035355-I). Also, P. Zezza acknowledges Generalitat Valenciana for her Grisolia fellowship grant. The authors acknowledge the assistance and advice of the Electron Microscopy Service of the Universitat Politecnica de Valencia.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Patterned Biolayers of Protein Antigens for Label-Free Biosensing in Cow Milk Allergy

  • Juste-Dolz, Augusto Miguel|||0000-0003-4889-6419
  • Puchades, Rosa|||0000-0002-9329-1593
  • Avella-Oliver, Miquel|||0000-0002-7293-6989
  • Maquieira, Angel|||0000-0003-4641-4957
  • Fernández-Sánchez, María Estrella
[EN] This paper focuses on creating one-dimensional diffractive grooved structures of antigen proteins on glass substrates for the label-free detection of antibodies to dairy allergens. In particular, the fabrication of protein structures is carried out by combining microcontact printing with physisorption, imines coupling, and thiol-ene click chemistry. The work first sets up these patterning methods and discusses and compares the main aspects involved in them (structure, biolayer thickness, functionality, stability). Homogeneous periodic submicron structures of proteins are created and characterized by diffractive measurements, AFM, FESEM, and fluorescence scanning. Then, this patterning method is applied to proteins involved in cow milk allergy, and the resulting structures are implemented as optical transducers to sense specific immunoglobulins G. In particular, gratings of bovine serum albumin, casein, and ß-lactoglobulin are created and assessed, reaching limits of detection in the range of 30¿45 ng·mL¿1 of unlabeled antibodies by diffractive biosensing., Grant PID2019-110713RB-I00 funded by MCIN/AEI/10.13039/501100011033 and cofunded by "ERDF A way of making Europe", Generalitat Valenciana (PROMETEO/2020/094), and Universitat Politecnica de Valencia (PAID-06-22).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

An all-in-one point-of-care testing device for multiplexed detection of respiratory infections

  • Teixeira, William|||0000-0002-6729-9508
  • Pallás-Tamarit, Yeray|||0000-0002-1167-5631
  • Juste-Dolz, Augusto Miguel|||0000-0003-4889-6419
  • Carrascosa Rubio, Javier|||0009-0003-4615-5278
  • Maquieira, Angel|||0000-0003-4641-4957
  • Morais, Sergi|||0000-0002-3722-2358
  • Sena-Torralba, Amadeo
  • Gozalbo-Rovira, Roberto
  • Rodríguez-Díaz, Jesús
  • Navarro, David
  • Giménez-Romero, David
[EN] The impact of the COVID-19 pandemic has reinforced the need for rapid, cost-effective, and reliable point-of-care testing (POCT) devices for massive population screening. The co-circulation of SARS-CoV-2 with several seasonal respiratory viruses highlights the need for multiplexed biosensing approaches. Herein, we present a fast and robust all-in-one POCT device for parallel viral antigen and serological analysis. The biosensing approach consists of a functionalized polycarbonate disc-shaped surface with microfluidic structures, where specific bioreagents are immobilized in microarray format, and a portable optoelectronic analyzer. The biosensor quantifies the concentration of viral antigens and specific immunoglobulins G and M for SARS-CoV-2, influenza A/B, adenovirus, and respiratory syncytial virus, using 30¿¿L of a sample. The semi-automated analysis of 6 samples is performed in 30¿min. Validation studies performed with 135 serum samples and 147 nasopharyngeal specimens reveal high diagnostic sensitivity (98¿100%) and specificity (84¿98%), achieving an excellent agreement (¿¿=¿0.937) with commercial immunoassays, which complies with the World Health Organization criteria for POC COVID-19 diagnostic tests. The versatility of the POCT device paves the way for the detection of other pathogens and analytes in the incoming post-pandemic world, integrating specific bioreagents against different variants of concerns and interests., W. T and A. J-D acknowledge the financial support for the Ph.D. studies (PAID-19-01-06 and FPI-UPV 2017 grants, respectively). S.M awards grant PID2019-110713RB-I00 funded by MCIN/AEI/10.13039/501100011033 and by "ERDF A way of making Europe." A.M awards grant DOGV no. 8815, May 19, 2020, pp. 16712-16726. The research was also supported by the Generalitat Valenciana (PROMETEO/2020/094, Proyecto "88/2021"). The authors gratefully acknowledge the outstanding contribution of Alicia Parra, Violeta Espada, Roberto Renuncio, and Jose A. Marzal for collecting the nasopharyngeal swab samples from the Health Centre of the Universitat Politecnica de Valencia. We also gratefully thank Dr. L. Mira and G. Rios for carefully reading this manuscript and the four anonymous reviewers for their insightful comments and suggestions.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Study of the composition of the incubator solutions used for the storage of unslanted transmission holograms in photohydrogels

  • Nieto-Rodríguez, Belén
  • Gutiérrez-Ramírez, Manuel
  • Morales-Vidal, Marta
  • García-Vázquez, José Carlos
  • Pascual, Inmaculada
  • Esquerdo Lloret, Tomás Vicente
  • Lucío, María Isabel|||0000-0001-7404-352X
  • Bañuls Polo, María-José|||0000-0002-2422-7731
  • Maquieira, Angel|||0000-0003-4641-4957
[EN] The development of new holographic materials represents a field of research in continuous evolution. The design and synthesis strategy of these materials must respond to the desirable characteristics of the photonic devices that need to be manufactured. Hydrogels are used as binders in applications in which the material must retain its structural integrity in liquid media. In applications where it is required to store volume holograms in hydrogels, it is necessary to carry out a first incubation process in solutions containing the necessary components. The general aim of this work has been to optimize the composition of incubator solutions composed of acrylamide as monomer, N,N¿-methylenebis(acrylamide) as crosslinker, triethanolamine and yellow eosin as photoinitiator system and DMSO/water as solvent. The effect of varying the monomer and crosslinker on the diffraction efficiency of stored holograms has been investigated., This research was developed under project PID2019-106601RB-I00, AdBiHol-PID2019-110713RB-I00, and PID2021- 1231240B-I00 funded by MICIU/AEI/10.13039/501100011033 and by ERDF A way of making Europe ; under projects CIDEXG/2022/60, GRISOLIAP/2019/143, PROMETEO/2021/006, PROMETEO/2020/094 and IDIFEDER/2021/014 (co-funded by European Union through the FEDER Program) funded by Generalitat Valenciana, Spain; and under project UAFPU20-23 funded by Universidad de Alicante.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Surface Bragg gratings of proteins patterned on integrated waveguides for (bio)chemical analysis

  • Juste-Dolz, Augusto Miguel|||0000-0003-4889-6419
  • Mico-Cabanes, Gloria|||0000-0003-1812-5883
  • Avella-Oliver, Miquel|||0000-0002-7293-6989
  • P. Muñoz|||0000-0001-6026-1649
  • Pastor Abellán, Daniel|||0000-0002-5297-3918
  • Maquieira, Angel|||0000-0003-4641-4957
  • Fernández-Sánchez, María Estrella
  • Bru-Orgiles, Luis Alberto
[EN] The incorporation of biomacromolecules onto silicon waveguiding microstructures constitutes a growing trend that pushes towards compact and miniaturized biosensing systems. This paper presents the integration of one-dimensional periodic nanostructures of proteins on the surface of micrometric silicon waveguides for transducing binding events between biomacromolecules. The study demonstrates this new bioanalytical principle by experimental results and theoretical calculations, and proves that rib waveguides (1-¿1.6-µm width) together with protein gratings (495-¿515-nm period) display suitable spectral responses for this optical biosensing system. Protein assemblies of bovine serum albumin are fabricated on the surface of silicon nitride waveguides, characterized by electron microscopy, and their response is measured by optical frequency domain reflectometry along the fabrication process and the subsequent stages of the biorecognition assays. Detection and quantification limits of 0.3 and 3.7 µg·mL¿1, respectively, of specific antibodies are inferred from experimental dose¿response curves. Among other interesting features, the results of this study point towards new miniaturized and integrated sensors for label-free bioanalysis., Funding was provided by grants PID2019-110713RB-I00, TED2021-132584B-C21, and PID2019-110877GB-I00 funded by MCIN/ AEI/https://doi.org/10.13039/501100011033 and co-funded by ERDF A way of making Europe , Ministerio de Economía y Competitividad (TEC2016-80385-P), Generalitat Valenciana (PROMETEO/2020/094, PROMETEO/2021/015, IDIFEDER/2021/046), and Universitat Politècnica de València (PAID-06 22).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Holographic Recording of Unslanted Volume Transmission Gratings in Acrylamide/Propargyl Acrylate Hydrogel Layers: Towards Nucleic Acids Biosensing

  • Zezza, Paola
  • Naydenova, Izabela
  • Lucío, María Isabel|||0000-0001-7404-352X
  • Bañuls Polo, María-José|||0000-0002-2422-7731
  • Maquieira, Angel|||0000-0003-4641-4957
[EN] The role of volume hydrogel holographic gratings as optical transducers in sensor devices for point-of-care applications is increasing due to their ability to be functionalized for achieving enhanced selectivity. The first step in the development of these transducers is the optimization of the holographic recording process. The optimization aims at achieving gratings with reproducible diffraction efficiency, which remains stable after reiterative washings, typically required when working with analytes of a biological nature or several step tests. The recording process of volume phase transmission gratings within Acrylamide/Propargyl Acrylate hydrogel layers reported in this work was successfully performed, and the obtained diffraction gratings were optically characterized. Unslanted volume transmission gratings were recorded in the hydrogel layers diffraction efficiencies; up to 80% were achieved. Additionally, the recorded gratings demonstrated stability in water after multiple washing steps. The hydrogels, after functionalization with oligonucleotide probes, yields a specific hybridization response, recognizing the complementary strand as demonstrated by fluorescence. Analyte-sensitive hydrogel layers with holographic structures are a promising candidate for the next generation of in vitro diagnostic tests., This work was financially supported by the E.U. FEDER, the Spanish Ministry of Science and Innovation (ADBIHOL-PID2019-110713RB-I00/AEI/10.13039/501100011033) and Generalitat Valenciana (PROMETEO/2020/094). M. I. Lucio acknowledges MINECO for her Juan de la Cierva-Incorporacion grants (IJC 2018-035355-I). P. Zezza acknowledges the Generalitat Valenciana for her S. Grisolia grant and the UPV for the mobility grant (BEFPI 2022). Funding was also received from Aid for First Research Projects (PAID-06-22) and the Vice-rectorate for Research of the Universitat Politecnica de Valencia (UPV). Partially funded by the European Space Agency, through PEA4000129503 collaborative project: Wound Healing In Space: Key challenges towards Intelligent and Enabling Sensing platforms.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Water-assisted synthesis of stable and multicolored CsPbX3@SiO2 core shell nanoparticles as fluorescent probes for biosensing

  • Collantes-Pablo, Cynthia
  • Teixeira, William|||0000-0002-6729-9508
  • González-Pedro, Victoria|||0000-0002-8133-5958
  • Bañuls Polo, María-José|||0000-0002-2422-7731
  • Quintero-Campos, Pedro|||0000-0002-9398-5077
  • Morais, Sergi|||0000-0002-3722-2358
  • Maquieira, Angel|||0000-0003-4641-4957
[EN] Colloidal lead halide perovskite nanocrystals are highly luminescent materials with great promise as fluorescent probes in biosensing as long as their intrinsic instability in aqueous media is effectively addressed. In this study, we successfully prepared stable and multicolored CsPbX3@SiO2 (X = Cl/Br, Br and I) core¿ shell nanoparticles through a simple method based on the water-induced transformation of Cs4PbX6 into CsPbX3, combined with sol¿gel procedures. We observed that the concentration of the Cs4PbX6 precursor plays a crucial role in the formation of isolated nanospheres with uniform silica coating and in controlling the number of core-free particles. Furthermore, our research expands this approach to other halide compositions, resulting in multicolored core¿shell nanoparticles with emission wavelengths ranging from 490 to 700 nm, average sizes below 30 nm, and photoluminescence quantum yields close to 60%. Unlike in previous reports, the silica coating boosts the photoluminescence quantum yields compared to uncoated counterparts and provides increased structural stability for more than four days. Moreover, a controlled thermal treatment confers water stability to the as-synthesized nanoparticles. To establish the feasibility of the developed materials as fluorescent probes, we successfully demonstrated their specific recognition of a humanized antibody (omalizumab) used in treating patients with severe allergic asthma. This work paves the way to develop in vitro tests using CsPbX3@SiO2 core¿shell nanoparticles as fluorogenic probes., This work was financially supported by the E.U FEDER project ADBIHOL/AEI/10.13039/501100011033 from MCIN/AEI and PROMETEO/2020/094 from Generalitat Valenciana. C. C. thanks the Spanish Ministry of Economy and Competitiveness for her predoctoral contract (BES-2017-080242). W. T. acknowledges the financial support from Universitat Politécnica de Valéncia for the Ph.D. studies (PAID-01-19-06).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Synthesis of skeletally diverse ß-lactam haptens for the in vitro diagnosis of IgE-mediated drug allergy

  • Peña-Mendizábal, Edurne
  • Hua, Bruce K.
  • Ibáñez-Echevarría, Ethel
  • Hernández-Fernández de Rojas, Dolores
  • Schreiber, Stuart L.
  • Maquieira, Angel|||0000-0003-4641-4957
  • Morais, Sergi|||0000-0002-3722-2358
[EN] We present the first synthesis of beta-lactam-derived haptens, leveraging the principles of diversity-oriented synthesis to discover compounds for drug allergy in vitro testing. We designed, synthesised, and performed in vitro immunological evaluation on 18 structurally diverse haptens derived from beta-lactam antibiotics. The antigens obtained with the synthesised haptens allow for the detection of specific anti-beta-lactam immunoglobulins G and E. Excellent diagnostic sensitivity (83%) and specificity (100%) were achieved when the panel of antigens was tested against a cohort of 31 human serum samples using a multiplexed compact disc-based in vitro testing tool. We posit that adopting this strategy could aid beta-lactam delabeling initiatives., This work was supported by the H2020 program (project COBIOPHAD, grant agreement No. 688448), Agencia Estatal de Investigacion (PID2019-110713RB-I00, FEDER awarded to S.M.); Generalitat Valenciana (PROMETEO/2020/094 awarded S.M.); and the National Institute of General Medical Sciences (GM- 1R35GM127045 awarded to S.L.S.). E.P.M. was supported by an FPU fellowship from the Ministerio de Educacio¿n, Cultura y Deporte (FPU15/01738 and EST18/00360). B.K.H. was supported by a fellowship from the National Science Foundation (DGE1144152 and DGE1745303).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Nucleotide-selective amplification and array-based detection for identifying multiple somatic mutations

  • Tortajada-Genaro, Luis Antonio|||0000-0003-4021-5607
  • Martorell-Tejedor, Sara
  • Maquieira, Angel|||0000-0003-4641-4957
  • Lazaro, Ana
[EN] In the context of personalized and cost-effective treatment, knowledge of the mutational status of specific genes is advantageous to predict which patients are responsive to therapies. As an alternative to one-by-one detection or massive sequencing, the presented genotyping tool determines multiple polymorphic sequences that vary a single nucleotide. The biosensing method includes an effective enrichment of mutant variants and selective recognition by colorimetric DNA arrays. The proposed approach is the hybridization between sequence-tailored probes and products from PCR with SuperSelective primers to discriminate specific variants in a single locus. A fluorescence scanner, a documental scanner, or a smartphone captured the chip images to obtain spot intensities. Hence, specific recognition patterns identified any single-nucleotide change in the wild-type sequence over- coming qPCR methods and other array-based approaches. Studied mutational analyses applied to human cell lines provided high discrimination factors, the precision was 95%, and the sensitivity was 1% mutant of total DNA. Also, the methods showed a selective genotyping of the KRAS gene from tumorous samples (tissue and liquid biopsy), corroborating results by NGS. The developed technology supported on low-cost robust chips and optical reading provides an attractive pathway toward implementing fast, cheap, reproducible discrimination of oncological patients., Financial support received from EU FEDER, MINECO Project PID2019-110713RB-I00, and Generalitat Valenciana GVA PROMETEO/2020/094.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Holographic Surface Relief Diffraction gratings made of hydrogels for direct label-free biosensing of IgGs

  • Cubells-Gómez, Aitor|||0000-0001-6844-3439
  • Lucío, María Isabel|||0000-0001-7404-352X
  • Bañuls Polo, María-José|||0000-0002-2422-7731
  • Maquieira, Angel|||0000-0003-4641-4957
[EN] This work describes the development of a label-free (LF) biosensing platform for the direct detection of targets based on diffractive structures fabricated with acrylamide-based hydrogels biofunctionalized with proteins and antibodies. Hydrogels containing Bovine Serum Albumin protein (BSA) with different crosslinking degrees were synthesized and characterized to find the optimal conditions for the suitable fabrication of surface relief gratings (SRGs). The bioavailability of BSA-functionalized hydrogels for the specific recognition of anti-BSA antibodies was verified by fluorescence detection. After the hydrogel-based SRG fabrication, diffraction efficiency measures at two different laser wavelengths were used for the direct LF detection of anti-BSA antibodies. The limit of detection in the sub mg L-1 range was read. Additionally, SRGs were prepared with hydrogels biofunctionalized with anti-rabbit antibodies for the direct detection of IgGs from rabbit serum, obtaining similar analytical performance without the necessity of labeling or applying amplification strategies., This work was supported by project ADBIHOL PID2019-110713RB-I00 funded by MICIU/AEI/10.13039/501100011033, project WEAR-OPSENS PID2022-140653OB-I00 funded by MICIU/AEI/10.13039/501100011033 and by "ERDF/EU", and PROMETEO/2020/094 from Generalitat Valenciana. M. I. Lucio acknowledges MINECO for her Juan de la Cierva Incorporacion grant (IJC 2018-035355-I) . A. Cubells-Gomez acknowledges the FPI-UPV 2022 grant program (PAID-01-22) . The authors acknowledge the assistance and advice from the Electron Microscopy Service of the Universitat Politecnica de Valencia.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Designing stable lead halide perovskite nanocrystals: From a single particle to nanocomposites

  • Collantes-Pablo, Cynthia
  • Teixeira, William|||0000-0002-6729-9508
  • González-Pedro, Victoria|||0000-0002-8133-5958
  • Bañuls Polo, María-José|||0000-0002-2422-7731
  • Maquieira, Angel|||0000-0003-4641-4957
[EN] Metal halide perovskite nanocrystals have attracted substantial interest given their easy manufacturing, superior Photoluminiscence Quantum Yield and striking optical properties. Despite the huge potential of such materials, their practical implementation and future technological applications need to overcome stability drawbacks: spontaneous degradation, which is accelerated by external stressors (i.e., moisture, oxygen, heat, light, and their combinations), poor phase stability and loss of their colloidal stability due to ligand lability. Within this framework, the understanding of their surface chemistry features and ligand-binding patterns plays a key role in improving the robustness and stability of perovskite nanocrystals. This review presents a comprehensive study of state-of-the-art and current challenges in surface chemistry, interface engineering and encapsulation methodologies for stabilizing lead halide perovskite nanoparticles. We first introduced lead halide perovskite structural and optical properties and a brief discussion of synthesis methods. Next, we explored recent developments in encapsulation methods in different protective matrices comprising from core-shell to macroscale nanocomposites. We also analyzed the advantages and shortcomings of each approach according to their final applications. Finally, we concluded with a discussion of open research challenges and future directions in the aforementioned aspects., This work was financially supported by EU FEDER Project ADBIHOL/AEI/10.13039/501100011033 from MCIN/AEI and PROMETEO/2020/094 from the Generalitat Valenciana. C.C. thanks the Spanish Ministry of Economy and Competitiveness for her predoctoral contract (FPI/17 Scholarship) . W.T acknowledges financial support for Ph.D studies (FPI-UPV 2019 grants).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

A 3D-printed hollow microneedle-based electrochemical sensing device for in situ plant health monitoring

  • Parrilla, Marc
  • Sena-Torralba, Amadeo
  • Steijlen, Annemarijn
  • De Wael, Karolien
  • Morais, Sergi|||0000-0002-3722-2358
  • Maquieira, Angel|||0000-0003-4641-4957
[EN] Plant health monitoring is devised as a new concept to elucidate in situ physiological processes. The need for increased food production to nourish the growing global population is inconsistent with the dramatic impact of climate change, which hinders crop health and exacerbates plant stress. In this context, wearable sensors play a crucial role in assessing plant stress. Herein, we present a low-cost 3D-printed hollow microneedle array (HMA) patch as a sampling device coupled with biosensors based on screen-printing technology, leading to affordable analysis of biomarkers in the plant fluid of a leaf. First, a refinement of the 3D-printing method showed a tip diameter of 25.9 +/- 3.7 mu m with a side hole diameter on the microneedle of 228.2 +/- 18.6 mu m using an affordable 3D printer (<500 EUR). Notably, the HMA patch withstanded the forces exerted by thumb pressing (i.e. 20-40 N). Subsequently, the holes of the HMA enabled the fluid extraction tested in vitro and in vivo in plant leaves (i.e. 13.5 +/- 1.1 mu L). A paper-based sampling strategy adapted to the HMA allowed the collection of plant fluid. Finally, integrating the sampling device onto biosensors facilitated the in situ electrochemical analysis of plant health biomarkers (i.e. H2O2, glucose, and pH) and the electrochemical profiling of plants in five plant species. Overall, this electrochemical platform advances precise and versatile sensors for plant health monitoring. The wearable device can potentially improve precision farming practices, addressing the critical need for sustainable and resilient agriculture in changing environmental conditions., M.P. acknowledges the support of the Fund for Scientific Research (FWO) in Flanders (1265223N), Belgium. A.S.T. acknowledges Generalitat Valenciana and the European Social Fund for the CIAPOS fellowship (CIAPOS/2022/7) and the Fund for Scientific Reseach (FWO) in Flanders (V510323N). A.S recognizes support through a Rubicon fellowship from the Dutch Research Council (019.223EN.003). S.M. awards grant PID2019-110713RB-I00 funded by MCIN/AEI/10.13039/ 501100011033 and by "ERDF A way of making Europe". The research was financed by the AGROALNEXT/2022/054 grant from Conselleria d'Innovacio, Universitats, Ciencia i Societat Digital (Generalitat Valenciana, Spain), and MCIN, Next Generation EU (PRTR-C17.I1) funds. The authors acknowledge BOF-UAntwerp and FWO infrastructure funding.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Monodispersed CsPb2Br5@SiO2 Core-Shell Nanoparticles as Luminescent Labels for Biosensing

  • Collantes-Pablo, Cynthia
  • González-Pedro, Victoria|||0000-0002-8133-5958
  • Bañuls Polo, María-José|||0000-0002-2422-7731
  • Maquieira, Angel|||0000-0003-4641-4957
[EN] Despite the rising advances in the field of metal halide perovskite nanocrystals (NCs), the exploitation of such nanoparticles as luminescent labels for ex vivo imaging and biosensing is still unclear and in the early stages of investigation. One of the major challenges toward the implementation of metal halide perovskite NCs in biosensing applications is to produce monodispersed nanoparticles with desired surface characteristics and compatible with aqueous environments. Here, we report the synthesis of monodispersed spherical CsPb2Br5@SiO2 core-shell nanoparticles by post-synthetic chemical transformation of 3D CsPbBr3 NCs in the presence of tetraethyl orthosilicate and a critical water/ammonia ratio. This method involves an ammoniamediated and ammonia-induced "top-down" transformation of as-synthesized 3D CsPbBr3 NCs to smaller CsPb2Br5 nanoclusters (ca. 2-3 nm), which trigger a seed-mediated silica growth, yielding monodispersed spherical blue luminescent (lambda(emission) = 432 nm) CsPb2Br5@SiO2 perovskite nanoparticles. By adjusting the reaction conditions, core-shell nanoparticles of a 36.1 +/- 4.5 nm diameter, which preserve their optical properties in water, were obtained. Besides that, the viability of the developed nanoparticles as a luminescent label for biosensing has been proven by specific biorecognition of the IgG protein in a direct immunoassay. Our work sheds light on the chemical processes and transformations involved in the silica nucleation mechanism in the presence of perovskite nanoparticles and opens the way for the future rational design of the next generation of semiconductor NC luminescent biological labels, This work was financially supported by the E.U FEDER projects BiHolog CTQ2016-75749-R and ADBIHOL (PID2019110713RB-I00) from MINECO and PROMETEO/2020/094 from Generalitat Valenciana. C.C. thanks the Spanish Ministry of Economy and Competitiveness for her predoctoral contract (FPI/17 Scholarship). V.G-P. thanks Universitat Polite`cnica de Vale`ncia for her postdoctoral fellowship (Grant-PAID-10-14) and for financial support from the project PAID/16/18 (VIITUPV)
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Multiple recombinase polymerase amplification and low-cost array technology for the screening of genetically modified organisms

  • Tortajada-Genaro, Luis Antonio|||0000-0003-4021-5607
  • Maquieira, Angel|||0000-0003-4641-4957
[EN] The identification of different transgenic products that are potentially present in foods is a priority given their impact on environmental safeness and health care. In this context, reliable, fast and inexpensive detection methods are demanded to screen the compliance of product labelling and traceability regulations. We herein developed a method that combines recombinase polymerase amplification (RPA) in a multiple format and a hybridisation assay. This system was optimised for the simultaneous amplification/detection of the 35S promoter, the NOS terminator and taxa, soya (Glycine max), corn (Zea mays) and potato (Solanum tuberosum), to denote the transgenic ingredients present in samples and to help to identify their source. As proof-of-concept, compact disc technology automated the optical sensing of RPA products. Discs worked as an analytical platform in the microarray format, and the reader/recorder as a detector. The analysis of the food mixtures containing genetically modified organisms up to 0.2 % showed excellent selectivity (no false-positives), reproducibility (relative error <20 %) and sensitivity (0.04 ng). The isothermal method was validated using certified reference materials and successfully compared to PCR-ELISA. The results of food products also confirmed it as an effective high-throughput tool for supporting simple, low-cost food safety controls, which makes it ideal for laboratories with limited resources., MINECO Project PID2019-110713RB-I00 and GVAPROMETEO/2020/094.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Smartphone-based lateral flow immunoassay for sensitive determination of Lactate Dehydrogenase at the point of care

  • Banguera-Ordoñez, Yulieth Deifan
  • Quintero-Campos, Pedro|||0000-0002-9398-5077
  • Maquieira, Angel|||0000-0003-4641-4957
  • Morais, Sergi|||0000-0002-3722-2358
  • Sena-Torralba, Amadeo
[EN] Lactate dehydrogenase (LDH), a prevalent enzyme involved in anaerobic glycolysis, is released into body fluids following cell damage and has long been a general marker of tissue injury. However, due to its lack of selectivity and the advent of more accurate biomarkers, the clinical utility of LDH has been largely limited to confirming hemolysis. LDH has been recognized as a valuable prognostic biomarker for various cancers, making its monitoring crucial during cancer management. Traditional LDH methods include spectrophotometric analysis of NADH at 340 nm, native electrophoresis, or enzyme-linked immunosorbent assay. This study presents the first lateral flow immunoassay (LFIA) for the smartphone-based quantification of serum LDH levels at the point of care. Highly-affinity and specific antibodies have been produced, with 5 nM equilibrium dissociation constant and no cross-reactivity with human serum albumin and human immunoglobulin G. Utilizing carbon nanoparticles as signal transducers significantly enhanced the quantification limit 55-fold, compared to the conventional gold nanoparticles-based LFIA, achieving a quantification limit of 1.5 ng mL¿ 1 . The developed assay demonstrated a mean recovery rate of 115 ± 21 % when evaluating LDH-spiked serum samples. This method can be an interesting home-testing tool for monitoring cancer progression or therapy effectiveness., Y.D.B.O. acknowledges the financial support of the Ministerio de Ciencia Tecnología e Innovacion Scholarship Program No. 8852 of Colombia. A.S. acknowledges Generalitat Valenciana and the European Social Fund for the CIAPOS fellowship (CIAPOS/2022/7). S.M. awards grant PID2019-110713RB-I00 funded by MCIN/AEI/10.13039/501100011033 and by "ERDF A way of making Europe .
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Multiplexed analytical approaches to beta-lactam allergy in vitro testing standardization

  • Juárez-Rodríguez, María José
  • Ibáñez-Echevarría, Ethel
  • Hernández-Fernández de Rojas, Dolores
  • Maquieira, Angel|||0000-0003-4641-4957
  • Morais, Sergi|||0000-0002-3722-2358
[EN] The suspicion of beta-lactam allergy directly contributes to the prescription of antibiotics that diverge from the guidelines, increasing antimicrobial resistance, one of the biggest threats to global health. In vitro quantification of specific IgE is very useful for monitoring allergy, as it confirms or rules out immediate beta-lactam drug allergy and helps find safe alternative antibiotic stewardship. However, reliable in vitro quantification of specific IgE to beta-lactam antibiotics by immunoassay is challenging because of the difficulty of having selective immunoreagents, mainly beta-lactam antigens, and its low concentration levels in serum. Thus, reliable and sensitive in vitro tests for multiplex detection of allergy to different beta-lactam antibiotics is currently essential for clinical diagnosis. Nevertheless, the lack of standardization of quantitative in vitro methods makes the comparison and interpretation of the results difficult. Here, as proof of concept, we report an improved multiplex microimmunoassay for beta-lactam allergy in vitro testing standardization. The results revealed that homologous calibration allows reliable quantification of specific IgE in human serum at very low concentrations (144 ng L-1). Moreover, the reproducibility of the results increases 2-fold using an internal standard, achieving accurate quantitative information: 93% and 106% recovery for penicillin and amoxicillin, respectively. We simultaneously evaluated the reliability of the improved multiplexed in vitro method in a cohort of 40 human serum samples and achieved excellent agreement (0.99) with a currently used in vitro test., M.J.J acknowledges financial support from the FPIprogram from Universitat Politecnica de Valencia. This research was supported by the H2020 program (project COBIOPHAD, grant agreement No. 688448) , being an initiative of the Photonics Public Private Partnership; Agencia Estatal de Investigacian (PID2019-110713RB-I0 0, FEDER) ; program UPVLa FE 2019 (P105 VALBIOAL).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Biogratings: nanoestructuras de biomoléculas para análisis químico mediante difracción de luz

  • Avella-Oliver, Miquel|||0000-0002-7293-6989
  • Juste-Dolz, Augusto Miguel|||0000-0003-4889-6419
  • Maquieira, Angel|||0000-0003-4641-4957
  • Fernández-Sánchez, María Estrella
[ES] La química analítica es una ciencia dinámica que integra multitud de disciplinas. Desde hace algún tiempo, parte del progreso de la química analítica es fruto de la convergencia entre diferentes campos. Entre otros, el uso de biomacromoléculas con fines analíticos proporciona una selectividad excelente, y la implementación de nanomateriales permite utilizar fenómenos fotónicos de transducción que favorecen el desarrollo de biosensores. 1,2 En los últimos años parte de las actividades de nuestro grupo de investigación se enmarcan en este contexto.3¿6 En particular, esta comunicación se centra en una estrategia especialmente interesante que hemos denominado con el término biogratings. Llamamos biograting a una capa de biomacromoléculas (proteínas, ácidos nucleicos, etc.) inmovilizadas sobre una superficie sólida y estructurada según un patrón periódico diseñado para difractar la luz incidente. En otras palabras, son nanoestructuras difractivas de biomoléculas sobre sustratos sólidos. La Figura 1 muestra una configuración típica de biograting constituido por un patrón de líneas de proteínas inmovilizadas (strips) y líneas vacías (gaps) dispuestas de forma periódica. El interés analítico de estas nanoestructuras reside en que son capaces de aprovechar la difracción de la luz para transformar interacciones biorreceptoranalito en señales ópticas fácilmente medibles. Entre otras capacidades que se discutirán a continuación, cabe destacar el poder realizar ensayos de biorreconocimiento sin marcaje y a tiempo real, para el análisis directo de muestras complejas. Esta comunicación expone las características de los biogratings y los aspectos clave en su desarrollo: fabricación, estrategias de transducción posibles, y su aplicación en biosensado., Esta publicación es parte del proyecto de I+D+i PID2019-110713RB-I00 financiado por MCIN/AEI/10.13039/501100011033 y FEDER Una manera de hacer Europa , y del proyecto PROMETEO/2020/094 financiado por la Generalitat Valenciana. Financiado con Ayuda a Primeros Proyectos de Investigación (PAID-06-22), Vicerrectorado de Investigación de la Universitat Politècnica de València (UPV).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Denaturing for Nanoarchitectonics: Local and Periodic UV-Laser Photodeactivation of Protein Biolayers to Create Functional Patterns for Biosensing

  • Juste-Dolz, Augusto Miguel|||0000-0003-4889-6419
  • Avella-Oliver, Miquel|||0000-0002-7293-6989
  • Maquieira, Angel|||0000-0003-4641-4957
  • Delgado-Pinar, Martina
  • Fernández-Sánchez, María Estrella
  • Cruz, José Luis
  • Andrés, Miguel V.
[EN] The nanostructuration of biolayers has become a paradigm for exploiting nanoscopic light-matter phenomena for biosensing, among other biomedical purposes. In this work, we present a photopatterning method to create periodic structures of biomacromolecules based on a local and periodic mild denaturation of protein biolayers mediated by UV-laser irradiation. These nanostructures are constituted by a periodic modulation of the protein activity, so they are free of topographic and compositional changes along the pattern. Herein, we introduce the approach, explore the patterning parameters, characterize the resulting structures, and assess their overall homogeneity. This UV-based patterning principle has proven to be an easy, cost-effective, and fast way to fabricate large areas of homogeneous one-dimensional protein patterns (2 min, 15 x 1.2 mm, relative standard deviation ? 16%). This work also investigates the implementation of these protein patterns as transducers for diffractive biosensing. Using a model immunoassay, these patterns have demonstrated negligible signal contributions from non-specific bindings and comparable experimental limits of detection in buffer media and in human serum (53 and 36 ng & BULL;mL-1 of unlabeled IgG, respectively)., This work was financially supported by the Ministerio de Ciencia e Innovacion/Agencia Estatal de Investigacion (MCIN/AEI/10.13039/501100011033) , co-funded by the European Union "ERDF A way of making Europe", under grants PID2019-110713RB-I00 and PDI2019-104276RB-I00, and Generalitat Valenciana (PROMETEO/2020/094 and PROMETEO/2019/048) . A.J.-D. acknowledges the FPI-UPV 2017 grant program. The authors thank Angel Lopez Munoz for the construction of the scanning system.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Surface coupling of oligo-functionalized dendrimers to detect DNA mutations after blocked isothermal amplification

  • Martorell-Tejedor, Sara
  • Tortajada-Genaro, Luis Antonio|||0000-0003-4021-5607
  • González Martínez, Miguel Ángel|||0000-0002-5104-1262
  • Maquieira, Angel|||0000-0003-4641-4957
[EN] This study presents a useful strategy for the bioconjugation of probes for developing high-performance versatile chips applied to fast-response, low-cost DNA biosensing. We herein demonstrate that the high-density immobilization of dendrimer-oligonucleotide hybrids promotes the reliable sensitive sensing of single-nucleotide variants despite their low concentration. Carboxyl-terminated poly(amidoamine) dendrimers directly coupled to amine-derivatized oligonucleotides were anchored to the activated surfaces of thermoplastics (polycarbonate and cycloolefin polymer). Surface characterization techniques and hybridization assays reported that the multiple functional sites of the oligofunctionalized dendrimer facilitated the efficient immobilization of probes and the sensitive capture of DNA targets (5 pM detection limit). Array performance was better than that of the surfaces functionalized with linear crosslinkers, such as vinyltriethoxysilane or 3-(triethoxysilyl)propyl isocyanate, as well films with unconjugated dendrimer molecules. Based on oligo-dendrimers hybrids, disposable DNA-based biosensing platforms were developed for point-ofcare diagnostics. A selective high-sensitive hybridization assay was performed that included amplification products of blocked PCR and recombinase polymerase amplification (RPA) as an isothermal reaction. The chip results indicated that the single-nucleotide mutant variant of the BRAF oncogene was correctly discriminated in colorectal tissues from cancer patients., The authors acknowledge the financial support received from EU FEDER, the Spanish Ministry of Economy and Competitiveness (PID2019-110713RB-I00 and Technical Support Personnel PTA-2016) and Generalitat Valenciana (PROMETEO/2020/094).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Bispecific Single-Domain Antibodies as Highly Standardized Synthetic Calibrators for Immunodiagnosis

  • Segovia-de los Santos, Paula
  • Echaides, Cesar
  • Lassabe, Gabriel
  • Gonzalez-Sapienza, Gualberto
  • Quintero-Campos, Pedro|||0000-0002-9398-5077
  • Morais, Sergi|||0000-0002-3722-2358
  • Maquieira, Angel|||0000-0003-4641-4957
[EN] Commonly, serological immunoassays and diagnostic kits include reference standard reagents (calibrators) that contain specific antibodies to be measured, which are used for the quantification of unknown antibodies present in the sample. However, in some cases, such as the diagnosis of allergies or autoimmune diseases, it is often difficult to have sufficient quantities of these reference standards, and there are limitations to their lot-to-lot reproducibility and standardization over time. To overcome this difficulty, this study introduces the use of surrogate recombinant calibrators formulated on the basis of two single-domain antibodies (nanobodies) combined through a short peptide linker to produce a recombinant bispecific construct. One of the nanobodies binds to the cognate analyte of the target antibody and the second is specific for the paratope of the secondary detecting antibody. The bispecific nanobody inherits the outstanding properties of stability and low-cost production by bacterial fermentation of the parent nanobodies, and once calibrated against the biological reference standard, it can be reproduced indefinitely from its sequence in a highly standardized manner. As a proof of concept, we present the generation and characterization of two bispecific calibrators with potential application for the diagnosis of allergy against the antibiotics aztreonam and amoxicillin in humans., This work was supported by CSIC 2007-348, ANII FMV 2019_156321, and ANII FMV 2018_148245. P.S. is a recipient of a scholarship from ANII-Uruguay. P.Q.-C. acknowledges financial support from Generalitat Valenciana through the research staff training program (GVA ACIF/2018/173) . This research was also funded by Agencia Estatal de Investigacion (PID2019-110713RB-I00, FEDER) , program UPV-La FE 2019 (P105 VALBIOAL) , and PROMETEO/2020/094.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

An ultra-sensitive homologous chemiluminescence immunoassay to tackle penicillin allergy

  • Quintero-Campos, Pedro|||0000-0002-9398-5077
  • Maquieira, Angel|||0000-0003-4641-4957
  • Morais, Sergi|||0000-0002-3722-2358
  • Segovia-de los Santos, Paula
  • Ibáñez-Echevarría, Ethel
  • Hernández-Fernández de Rojas, Dolores
  • Casino, Patricia
  • Lassabe, Gabriel
  • Gonzalez-Sapienza, Gualberto
[EN] Penicillin is one of the most widely used antibiotics to treat bacterial infections in clinical practice. The antibiotic undergoes degradation under physiological conditions to produce reactive compounds that in vivo bind self- proteins. These conjugates might elicit an immune response and trigger allergic reactions challenging to di- agnose due to the complex immunogenicity. Penicillin allergy delabeling initiatives are now part of antibiotic stewardship programs and include the use of invasive and risky in vivo tests. Instead, the in vitro quantification of specific IgE is highly useful to confirm immediate allergy to penicillins. However, discrepant results associated with the low sensitivity and accuracy of penicillin allergy in vitro tests have limited their routine diagnostic use for delabeling purposes. We aimed to develop a homologous chemiluminescence-based immunochemical method for the reliable determination of specific IgE to penicillin G, using unprecedented synthetic human-like Analytica Chimica Acta 1214 (2022) 339940 2standards. The synthetic standard targets the major antigenic determinant of penicillin G and the paratope of Omalizumab, acting as human-like specific IgE. It is a potent calibrator, highly stable, easy, and inexpensive to produce, overcoming the limitations of the pooled human serum preparations. The developed method achieved a good agreement and strong positive relationship, reaching a detection limit below 0.1 IU mL, P.Q-C acknowledges financial support from Generalitat Valenciana through the research staff-training program (GVA ACIF/2018/173). P.C. awards grants Ramon y Cajal and PID2019-110630 GB-I00 funded by MCIN/AEI/10.13039/501100011033 and by ERDF A way of making Europe¿. S.M awards grants PID2019-110713RB-I00 funded by MCIN/ AEI/10.13039/501100011033 and by ERDF A way of making Europe. PROMETEO/2020/094 funded by Generalitat Valenciana, and program UPV-La FE 2019 (P105 VALBIOAL), FMV-ANII 148245, FMV-ANIII 156321 funded by Agencia Nacional de Investigacion and CSIC 2007- 348 UdelaR, Uruguay, are also acknowledged.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Processing of Holographic Hydrogels in Liquid Media: A Study by High-Performance Liquid Chromatography and Diffraction Efficiency

  • Berramdane, Kheloud
  • Ramírez, Manuel G.
  • Zezza, Paola
  • Morales-Vidal, Marta
  • Beléndez, Augusto
  • Pascual, Inmaculada
  • Lucío, María Isabel|||0000-0001-7404-352X
  • Bañuls Polo, María-José|||0000-0002-2422-7731
  • Maquieira, Angel|||0000-0003-4641-4957
[EN] The storage of time-stable holographic gratings in hydrogel matrices when the material is immersed in aqueous media is a real challenge at present. The optimization of the storage stages of the holograms must be properly investigated to identify the most suitable development processes. For this reason, this work is focused on the study of the optimization of the washing stages of the hydrogels based on acrylamide and N,N'-methylenebis(acrylamide) once unslanted transmission holograms have been stored. High-performance liquid chromatography and UV-visible measurements have been employed in our system to analyze the composition of the washing solutions. PBST and DMSO:H2O are used as solvents in the washing stages. The diffraction efficiencies are measured during the washing stages and after the storing of the holograms during several days in PBST. Maximum diffraction efficiencies of 38 and 27.6% are reached when PBST and DMSO:H2O are employed, respectively, for the washing process. Holograms show temporal stability after being stored immersed in PBST at 4 degrees C for 4 days., This research was funded by Ministerio de Ciencia, Innovacion y Universidades, Spain, under project PID2019-106601RB-I00 and AdBiHol-PID2019-110713RB-I00 funded by MCIN/AEI/10.13039/501100011033 and by "ERDF A way of making Europe"; Generalitat Valenciana, Spain, under projects CDEIGENT/2018/024, GRISOLIAP/2019/143, PROMETEO/2021/006, PROMETEO/2020/094 and IDIFEDER/2021/014 (co-funded by European Union through the FEDER Program). M. I. Lucio acknowledges her Juan de la Cierva Incorporacion grant (IJC 2018-035355-I) funded by MCIN/AEI/10.13039/501100011033. M. I. Lucio and A. Belendez acknowledge the Programa Propio para el fomento de la I + D + I del Vicerrectorado de Investigacion y Transferencia de Conocimiento of the Universidad de Alicante for the grant "Ayudas para estancias de personal investigador invitado" (INVA20-02). K. Berramdane thanks to the government of Algeria for her scholarship offered to develop her thesis in the Holography and Optical Processing Group at the University of Alicante (Spain).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Fast DNA biosensing based on isothermal amplification, unmodified gold nanoparticles, and smartphone detection

  • Tortajada-Genaro, Luis Antonio|||0000-0003-4021-5607
  • Lucío, María Isabel|||0000-0001-7404-352X
  • Maquieira, Angel|||0000-0003-4641-4957
[EN] The protection of the consumer against foodborne illnesses and fraudulent practices requires methods capable of detecting critical components. Classical instrumental and DNA-based technologies have assay time, portability, and cost limitations. Thus, food control needs alternative methodologies for massive and cost-effective screening. Herein, we report an instrument-free method based on detecting genes that encode proteins related to food allergies and ingredients associated with illegal practices. Tailed recombinase polymerase amplification (tailed-RPA) provided the selective isothermal amplification of target regions. A reproducible and fast optical detection was developed based on the salt-induced aggregation of 15 nm gold nanoparticles (AuNPs). The target presence was directly observed (naked-eye detection) and quantified using a smartphone and RGB image decomposition. The advantages arise from the effective formation of a hybrid complex between non-functionalized nanoparticles and amplification products with a single-strand tail, featuring short incubation time, simplicity, and low sample and reagent volumes. As proof of concept, two targets were determined: trnL gene and ITS region. The first sequence is located in the chloroplast genome of cereals and is valuable to control the adulteration of meat products. The second is a fragment common to the three main gluten-containing cereals, applicable to the indirect detection of this allergen. The novelty also is the integration of a low-cost assay platform and a straightforward interpretation system to foster its implementation in the industry. The RPA-AuNP assay offered a good sensitivity (genomic DNA 0.8 ng), selectivity (absence of unspecific response), reproducibility (standard deviation 2¿11%), and accuracy in marketed food products (100%). Therefore, a competitive biosensing system enables better control according to food industry/consumers demands from Farm to Fork strategy., MINECO Project PID2019-110713RB-I00 and Generalitat Valenciana PROMETEO/2020/094. Students that have supported us during the research.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Surface Micro-Patterned Biofunctionalized Hydrogel for Direct Nucleic Acid Hybridization Detection

  • Zezza, Paola
  • Fernández, Estrella
  • Lucío, María Isabel|||0000-0001-7404-352X
  • Maquieira, Angel|||0000-0003-4641-4957
  • Bañuls Polo, María-José|||0000-0002-2422-7731
[EN] The present research is focused on the development of a biofunctionalized hydrogel with a surface diffractive micropattern as a label-free biosensing platform. The biosensors described in this paper were fabricated with a holographic recording of polyethylene terephthalate (PET) surface micro-structures, which were then transferred into a hydrogel material. Acrylamide-based hydrogels were obtained with free radical polymerization, and propargyl acrylate was added as a comonomer, which allowed for covalent immobilization of thiolated oligonucleotide probes into the hydrogel network, via thiol-yne photoclick chemistry. The comonomer was shown to significantly contribute to the immobilization of the probes based on fluorescence imaging. Two different immobilization approaches were demonstrated: during or after hydrogel synthesis. The second approach showed better loading capacity of the bioreceptor groups. Diffraction efficiency measurements of hydrogel gratings at 532 nm showed a selective response reaching a limit of detection in the complementary DNA strand of 2.47 mu M. The label-free biosensor as designed could significantly contribute to direct and accurate analysis in medical diagnosis as it is cheap, easy to fabricate, and works without the need for further reagents., This work was financially supported by the E.U. FEDER, the Spanish Ministry of Science and Innovation (ADBIHOL-PID2019-110713RB-I00/AEI/10.13039/501100011033) and Generalitat Valenciana (PROMETEO/2020/094). M. I. Lucío acknowledges her Juan de la Cierva-Incorporación grant (IJC 2018-035355-I) funded by MCIN/AEI/10.13039/501100011033. P. Zezza acknowledges Generalitat Valenciana for her Grisolia fellowship grant.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Simultaneous quantification of six major allergens in commercial foods for children using a Multiplex Array on a Digital Versatile Disc

  • Sena-Torralba, Amadeo
  • Smits, Nathalie G.E.
  • Blázquez, David
  • Albero-Pérez, Clara
  • Pallás-Tamarit, Yeray|||0000-0002-1167-5631
  • Maquieira, Angel|||0000-0003-4641-4957
  • Morais, Sergi|||0000-0002-3722-2358
[EN] The hypothesis of this study is centered around the logic that an enhanced analysis of potential allergens during the food production can lead to increased accuracy and reliability of food labeling. The development of a cost-effective and straightforward optoelectrical microanalytical system for the simultaneous quantification of the six most common food allergens (peanut, hazelnut, almond, milk, wheat, and soybean) is presented. The system uses a regular versatile disc (DVD) functionalized with highly selective antibodies in a microarray format and a DVD drive as the optical detector. The multiplexed assay reliably (RSD < 20 %) determines the level of the allergenic proteins ranging from 0.1 to 143.4 ng mL-1. The analysis of food consumables (biscuits, seafood substitutes, and probiotic foods) revealed a 100 % accuracy in identifying the allergens ingredients declared on the label. The method offers potential for application as a high throughput biosensing tool for screening multiple allergens in commercial foods., The research team acknowledges financial support from Paymsa. S. M. awards grant PID2019-110713RB-I00 funded by MCIN/AEI/10.13039/501100011033 and by "ERDF A way of making Europe". The research was also supported by the Generalitat Valenciana (PROMETEO/2020/094, Proyecto "88/2021"). A. S. acknowledges MINECO for the Juan de la Cierva Formacion fellowship (FJC2020-043927-I). The researchers also gratefully thank Robbie Jennings for carefully revising the English throughout the manuscript.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

A genosensor for detecting single-point mutations in dendron chips after blocked recombinase polymerase amplification

  • Martorell-Tejedor, Sara
  • Maquieira, Angel|||0000-0003-4641-4957
  • Tortajada-Genaro, Luis Antonio|||0000-0003-4021-5607
[EN] A biosensing system was developed to accurately detect a single nucleotide change in the target organism genome, integrating a selective isothermal amplification and a sensitive dendron-mediated DNA hybridization assay in the array format. The novelty arises from the coupling reactions of the dendron and its use as a crosslinker. The allele-specific probes were oligonucleotide-dendron conjugates prepared by fast and clean click-chemistry (thiol-yne reaction) and coupled onto the photo-activated surface of polycarbonate substrates (carbodiimide reaction). The output was forest-array chips with multipoint-site crosslinkers and compatible with current microarray fabrication technologies. The products of blocked recombinase polymerase amplification (blocked RPA), formed at 37 degrees C, were hybridized with attached probes for specific nucleotide genotyping. The developed approach exhibited sensitive recognition of DNA variants compared to chips based on linear crosslinkers (10-100 fold), showing excellent analytical performances for planar chip and fluidic formats. The methodology was successfully applied to detect the H1047R mutation in the PIK3CA gene (c.3140A > G) from clinical samples of human cancer tissues, the results being consistent with sequencing techniques. The colorimetric biosensing method was reliable, versatile, low cost, sensitive (detection limit genomic DNA: 0.02 ng mu L-1), and specific (accuracy >95%)., The MINECO Project PID2019-110713RB-I00 and Generalitat Valenciana PROMETEO/2020/094 are acknowledged.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Reversed-phase allergen microarrays on optical discs for multiplexed diagnostics of food allergies

  • Tortajada-Genaro, Luis Antonio|||0000-0003-4021-5607
  • Morais, Sergi|||0000-0002-3722-2358
  • Maquieira, Angel|||0000-0003-4641-4957
  • Casañ-Raga, Natalia
  • Mas, Salva
  • Ibañez-Echevarria, Ethel
[EN] A high percentage of the population suffers from multiple food allergies justifying the importance of reliable diagnostic methods. Single-analyte solutions based on the determination of specific immunoglobulins E (sIgE) are safe and fast but are generally time-consuming and expensive. Thus sustainable microanalytical methods that provide multianalyte profiling information are highly demanded. This work presents the in vitro biosensing of specific IgE levels based on a reversed-phase allergen array. The approach consists of optical biosensing supported by direct multiplex immunoassays and on-disc technology. It identifies 12 sIgE associated with food allergies in a single analysis with a low serum sample volume (25 ¿L). After processing captured images, specific signals for each target biomarker correlate to their concentration. The assay analytically performs well with 0.3 IU/mL and 0.41 IU/mL as the detection and quantification limits in serum, respectively. This novel method achieves excellent clinical specificity (100%) and high sensitivity (91.1%), considering the diagnosis obtained by clinical history and ImmunoCAP analysis. The results demonstrate that microanalytical systems based on allergen arrays can potentially diagnose multiple food allergies and are easily implemented in primary care laboratory settings., Program UPV-La Fe 2019 (PI05 VALBIOAL) and grant PID2019-110713RB-I00 funded by MCIN/AEI/https://doi.org/10.13039/501100011033 and by "ERDF A way of making Europe." The Generalitat Valenciana also supported this research (PROME-TEO/2020/094, Proyecto "88/2021").
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Storage Optimization of Transmission Holographic Gratings in Photohydrogels

  • Berramdane, Kheloud
  • Ramírez, Manuel G.
  • Navarro-Fuster, Victor
  • Morales-Vidal, Marta
  • Beléndez, Augusto
  • Pascual, Inmaculada
  • Lucío, María Isabel|||0000-0001-7404-352X
  • Bañuls Polo, María-José|||0000-0002-2422-7731
  • Maquieira, Angel|||0000-0003-4641-4957
[EN] The development and optimization of holographic materials represent a great challenge today. These materials must be synthesized according to the characteristics that are desirable in photonic devices whose application is the object of investigation. In certain holographic sensors and biosensors, it is essential that the recording material be stable in liquid media. Furthermore, the holographic gratings stored in them must have temporal and structural stability, so that they can act as transducers of the analytical signal. Therefore, it is essential to optimize its storage in terms of the chemical composition of the material and the optical parameters of recording. This work focuses on the study of the storage optimization of unslanted transmission volume phase holograms in photohydrogels based on acrylamide and N,N¿-methylenebis(acrylamide). Hydrogel matrices, also composed of acrylamide and N,N¿-methylenebis(acrylamide), with different degrees of cross-linking were used and analyzed by scanning electron microscopy and UV¿visible spectroscopy. The best results in terms of diffraction efficiency were reached for hydrogel matrices with an acrylamide/N,N¿-methylenebis(acrylamide) molar ratio between 19.9 and 26. This relationship was also optimized in the incubator solution used to incorporate the components necessary for the formation of the holograms in the hydrogel matrices. The maximum diffraction efficiency, about 35%, was achieved when using an incubation solution with an acrylamide/N,N¿-methylenebis(acrylamide) molar ratio of 4.35. The influence of the physical thickness of the hydrogel layers, the intensity, and the exposure time on the diffraction efficiency was also investigated and optimized. In addition, the behavior of the hologram was analyzed after a washing stage with PBST. A simple model that considered the effects of bending and attenuation of holographic gratings was proposed and used to obtain the optical parameters of the holograms., This research was funded by Ministerio de Ciencia, Innovación y Universidades, Spain, under project Wearopsens-PID2022-140653OB-I00, PID2019-106601RB-I00, AdBiHol-PID2019-110713RB-I00, and PID2021-1231240B-I00 funded by MCIN/AEI/10.13039/501100011033 and by ERDF A way of making Europe ; and by Generalitat Valenciana, Spain, under projects CIDEXG/2022/60, GRISOLIAP/2019/143, PROMETEO/2021/006, PROMETEO/2020/094, and IDIFEDER/2021/014 (cofunded by the European Union through the FEDER Program). M.I.L. acknowledges her Juan de la Cierva Incorporación grant (IJC 2018-035355-I) funded by MCIN/AEI/10.13039/501100011033. K.B. thanks the government of Algeria for her scholarship offered to develop her thesis in the Holography and Optical Processing Group at the University of Alicante (Spain).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Label-free detection of C-Reactive protein using bioresponsive hydrogel-based surface relief diffraction gratings

  • Lucío, María Isabel|||0000-0001-7404-352X
  • Hernández-Montoto, Andy|||0000-0001-5623-9836
  • Bañuls Polo, María-José|||0000-0002-2422-7731
  • Maquieira, Angel|||0000-0003-4641-4957
  • Fernández-Sánchez, María Estrella
  • Alamri, Sabri
  • Kunze, Tim
[EN] Responsive hydrogel-based surface relief gratings have demonstrated great performances as transducers in optical sensing. However, novel and smart designs of hydrogels are needed for the appropriate detection of analytes and biomolecules since the existing materials are very limited to specific molecules. In this work, a biosensing system based on surface relief gratings made of bioresponsive hydrogels has been developed. In particular, the hydrogel contains phosphocholine moieties to specifically recognize C-Reactive protein (CRP). The CRP-Sensing hydrogel capacity to selectively detect CRP was fully demonstrated. Using Direct Laser Interference Patterning, micro-gratings were created on CRP-Sensing hydrogel substrates and applied for the label-free sensing of CRP using a simple laser-based homemade optical setup. Limits of detection (LOD) and quantification (LOQ) in human serum dilutions of 1.07 and 8.92 mg L-1, respectively, were reached. These results demonstrate that the biosensing system allows the selective label-free detection of CRP within concentration ranges around those related to risks of cardiovascular diseases and sepsis. Besides, amplification strategies have been carried out improving the sensitivity, widening the linear range, and reaching better LOD and LOQ (0.30 mg L-1 and 4.36 mg L-1). Finally, all the approaches were tested for the quantification of CRP in certified human serum with recoveries of around 100%., This work was financially supported by the E.U. FEDER, the Spanish Ministry of Economy and Competitiveness MINECO (BiHolog-CTQ2016- 75749-R and AdBiHol-PID2019-110713RB-I00) and Generalitat Valenciana (PROMETEO/2020/094). M. I. Lucío acknowledges MINECO for her Juan de la Cierva Formacion and Incorporacion grants (FJCI-2016-29593, IJC 2018-035355-I). The authors acknowledge the assistance and advice of the Electron Microscopy Service of the Universitat Politècnica de València.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Standardizing In Vitro beta-Lactam Antibiotic Allergy Testing with Synthetic IgE

  • Quintero-Campos, Pedro|||0000-0002-9398-5077
  • Maquieira, Angel|||0000-0003-4641-4957
  • Morais, Sergi|||0000-0002-3722-2358
  • Gozalbo-Rovira, Roberto
  • Rodríguez-Díaz, Jesús
[EN] The global prevalence of ß-lactam allergy poses a major challenge in administering first-line antibiotics, such as penicillins, to a significant portion of the population. The lack of ß-lactam IgE antibody pools with defined selectivity hampers the standardization and validation of in vitro assays for ß-lactam allergy testing. To address this limitation, this study introduces a synthetic IgE specific to ß-lactam antibiotics as a valuable tool for drug allergy research and diagnostic tests. Using phage display technology, we constructed a library of human single-chain antibody fragments (scFv) to target the primary determinant of amoxicillin, a widely used ß-lactam antibiotic. Subsequently, we produced a complete human synthetic IgE molecule using the highly efficient baculovirus expression vector system. This synthetic IgE molecule served as a standard in an in vitro chemiluminescence immunoassay for ß-lactam antibiotic allergy testing. Our results demonstrated a detection limit of 0.05 IU/mL (0.63 pM), excellent specificity (100%), and a four-fold higher clinical sensitivity (73%) compared to the in vitro reference assay when testing a cohort of 150 serum samples. These findings have significant implications for reliable interlaboratory comparison studies, accurate labeling of allergic patients, and combating the global public health threat of antimicrobial resistance. Furthermore, by serving as a valuable trueness control material, the synthetic IgE facilitates the standardization of diagnostic tests for ß-lactam allergy and demonstrates the potential of utilizing this synthetic strategy as a promising approach for generating reference materials in drug allergy research and diagnostics., P.Q.-C. acknowledges financial support from Generalitat Valenciana through the research staff-training program (GVA ACIF/2018/173). S.M. acknowledges grant PID2019-110713RB-I00 funded by MCIN/AEI/10.13039/501100011033 and by ERDF A way of making Europe . PROMETEO/2020/094 funded by Generalitat Valenciana, program UPV-La FE 2019 (P105 VALBIOAL), the H2020 program (COBIOPHAD project, grant agreement No. 688448). J.R.-D. acknowledges grant PID2020-115403RBC22 funded by MICIN/AEI/10.13039/501100011033 and by ERDF A way of making Europe .
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Lateral Flow Microimmunoassay (LFIA) for the Reliable Quantification of Allergen Traces in Food Consumables

  • Sena-Torralba, Amadeo
  • Gabaldón-Atienza, Javier
  • Casino, Patricia
  • Cubells-Gómez, Aitor|||0000-0001-6844-3439
  • Maquieira, Angel|||0000-0003-4641-4957
  • Morais, Sergi|||0000-0002-3722-2358
[EN] Quality assurance and food safety are of great concern within the food industry because of unknown quantities of allergens often present in food. Therefore, there is an ongoing need to develop rapid, sensitive, and easy to use methods that serve as an alternative to mass spectrometry and enzyme-linked immunosorbent assay (ELISA) for monitoring food safety. Lateral flow immunoassay is one of the most used point-of-need devices for clinical, environmental, and food safety applications. Compared to traditional methods, it appears to be a simple and fast alternative for detecting food allergens. However, its reliability is frequently questioned due to the lack of quantitative information. In this study, a lateral flow microimmunoassay (LFuIA) is presented that integrates up to 36 spots in microarray format in a single strip, providing semi-quantitative information about the level of allergens, positive and negative controls, internal calibration, and hook effect. The LF IA has been evaluated for the on-site simultaneous and reliable quantification of almond and peanut allergens as a proof of concept, demonstrating high sensitivity (185 and 229 ug/kg, respectively), selectivity (77%), and accuracy (RSD 5¿25%) when analyzing commercial allergen-suspicious food consumables., S.M. awards grant PID2019-110713RB-I00 was funded by MCIN/AEI/10.13039/501100011033 and by ERDF A way of making Europe. P.C. awards grant PID2019-110630 GB-I00 was funded by MCIN/AEI/10.13039/501100011033 and by ERDF A way of making Europe. The Generalitat Valenciana also supported the research (PROMETEO/2020/094, Proyecto 88/2021). A.S. acknowledges MINECO for the Juan de la Cierva Formación fellowship (FJC2020-043927-I).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Discrimination of Single-Nucleotide Variants Based on an Allele-Specific Hybridization Chain Reaction and Smartphone Detection

  • Lázaro-Zaragozá, Ana
  • Maquieira, Angel|||0000-0003-4641-4957
  • Tortajada-Genaro, Luis Antonio|||0000-0003-4021-5607
[EN] Massive DNA testing requires novel technologies to support a sustainable health system. In recent years, DNA superstructures have emerged as alternative probes and transducers. We, herein, report a multiplexed and highly sensitive approach based on an allele-specific hybridization chain reaction (AS-HCR) in the array format to detect single-nucleotide variants. Fast isothermal amplification was developed before activating the HCR process on a chip to work with genomic DNA. The assay principle was demonstrated, and the variables for integrating the AS-HCR process and smartphone-based detection were also studied. The results were compared to a conventional polymerase reaction chain (PCR)-based test. The developed multiplex method enabled higher selectivity against single-base mismatch sequences at concentrations as low as 103 copies with a limit of detection of 0.7% of the mutant DNA percentage and good reproducibility (relative error: 5% for intra-assay and 17% for interassay). As proof of concept, the AS-HCR method was applied to clinical samples, including human cell cultures and biopsied tissues of cancer patients. Accurate identification of single-nucleotide mutations in KRAS and NRAS genes was validated, considering those obtained from the reference sequencing method. To conclude, AS-HCR is a rapid, simple, accurate, and cost-effective isothermal method that detects clinically relevant genetic variants and has a high potential for point-of-care demands., The authors acknowledge the financial support received from EU FEDER, the Spanish Ministry of Economy and Competitiveness (PID2019-110713RB-I00), and the Generalitat Valenciana (PROMETEO/2020/094 and GVA-FPI-2017 Ph.D. grant).