Skip to main content

ACCESO RADIO INTELIGENTE CON INTEGRACION DE DISPOSITIVOS DE USUARIO

PID2020-115104RB-I00

•
Funding agency name Agencia Estatal de Investigación
Funding agency acronym AEI
Program Programa Estatal de I+D+i Orientado a los Retos de la Sociedad
Call Proyectos de I+D+i (Generación de Conocimiento y Retos Investigación)
Call year 2020
State Plan 2017-2020 Plan Estatal de Investigación Científica y Técnica y de Innovación
Beneficiary centre UNIVERSITAT POLITECNICA DE CATALUNYA

Resultados relacionados

Resultados totales (Incluyendo duplicados): 14
Encontrada(s) 1 página(s)

UPCommons. Portal del coneixement obert de la UPC
Publication Artículo científico (JournalArticle)

Relay-empowered beyond 5G radio access networks with edge computing capabilities

  • Vilà Muñoz, Irene|||0000-0002-7086-9591
  • Sallent Roig, Oriol|||0000-0002-2114-1406
  • Pérez Romero, Jordi|||0000-0001-9131-5013
Relevant services envisaged for beyond 5G (B5G) systems, such as extended reality and holographic communications, have extremely demanding user experience requirements with significant computational and communication demands. While edge computing aims to address the computation requirements by offloading the computational tasks to edge servers near the user, the communication will take advantage of the technologies developed for 5G New Radio jointly with an never-before-seen degree of network densification. This paper proposes the use of relays with edge computing capabilities. The approach's potential for B5G are identified, and a system model is defined to characterize both computational and communications viewpoints. Based on this, results are provided to highlight the gains and limitations of the proposed approach from a system-level perspective. Finally, the main challenges for enabling relays with computing capabilities in B5G deployments are discussed., This work is part of VERGE project, which has received funding from the Smart Networks and Services Joint Undertaking under the European Union’s Horizon Europe research and innovation programme under Grant Agreement 101096034. Views and opinions expressed are however those of the authors only and do not necessarily reflect those of the European Union. Neither the European Union nor the granting authority can be held responsible for them. This paper has also been partly funded by the Spanish Ministry of Science and Innovation MCIN/AEI/ 10.13039/501100011033 under ARTIST project (ref. PID2020- 115104RB-I00). The work of Irene Vila ` has been funded by the European Union-NextGenerationEU, the Spanish Ministry of Universities and the Plan for Recovery, Transformation and Resilience, through the call for Margarita Salas Grants of the Universitat Politècnica de Catalunya (ref. 2022UPC-MSC- 94079)., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publication Artículo científico (JournalArticle)

On exploiting user equipment relaying capabilities in beyond 5G networks: opportunities, challenges, and road map

  • Pérez Romero, Jordi|||0000-0001-9131-5013
  • Sallent Roig, Oriol|||0000-0002-2114-1406
  • Ruiz García, Olga
Mobile Network Operators are facing significant expenditures in deploying 5G Radio Access Network (RAN) infrastructure to achieve the level of densification required for meeting the new services demands. This will be exacerbated in Beyond 5G scenarios, which envisage the operation in high frequency bands with poor propagation. Therefore, operators need to find new and cost-efficient ways of managing and deploying their infrastructure. In this context, sustained on the technological evolution of the User Equipment (UE) and on recent standardization initiatives, this paper proposes an upgraded Beyond 5G system based on augmenting the RAN through the exploitation of UE-to-network relaying capabilities for optimizing the coverage footprint and for bringing edge computing capabilities closer to the users. The paper presents the baseline enabling technologies for realizing this concept. discusses the key architectural requirements and challenges for each one and presents a possible implementation roadmap, supported by some evaluation results, which reflect that relaying can improve the throughput in a factor 6 and reduce outage probability in around 80%., This article is part of the ARTIST project (Reference PID2020-115104RB-I00), funded by the Spanish Ministry of Science and Innovation, under Grant MCIN/AEI/10.13039/501100011033. The article is also part of the VERGE project, which has received funding from the Smart Networks and Services Joint Undertaking, under the European Union’s Horizon Europe research and innovation program, under Grant 101096034., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publication Artículo científico (JournalArticle)

A spatio-temporal prediction methodology based on deep learning and real Wi-Fi measurements

  • Shaabanzadeh, Seyedeh Soheila
  • Sánchez González, Juan|||0000-0002-2415-9628
The rapid development of Wi-Fi technologies in recent years has caused a significant increase in the traffic usage. Hence, knowledge obtained from Wi-Fi network measurements can be helpful for a more efficient network management. In this paper, we propose a methodology to predict future values of some specific network metrics (e.g. traffic load, transmission failures, etc.). These predictions may be useful for improving the network performance. After data collection and preprocessing, the correlation between each target access point (AP) and its neighbouring APs is estimated. According to these correlations, either an only-temporal or a spatio-temporal based prediction is done. To evaluate the proposed methodology, real measurements are collected from 100 APs deployed in different university buildings for 3 months. Deep Learning (DL) methods (i.e. Convolutional Neural Network (CNN), Simple Recurrent Neural Network (SRNN), Gated Recurrent Unit (GRU), Long Short-Term Memory (LSTM), Transformer) are evaluated and compared for both temporal and spatio-temporal based predictions. Moreover, a hybrid prediction methodology is proposed using a spatial processing based on CNN and a temporal prediction based on RNN. The proposed hybrid methodology provides an improvement in the prediction accuracy at expenses of a slight increase in the Training Computational Time (TCT) and negligible in Prediction Computational Time (PCT)., This paper has been funded by the Spanish Ministry of Science and Innovation MCIN/AEI/10.13039/501100011033 under ARTIST project (ref. PID2020-115104RB-I00)., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publication Artículo científico (JournalArticle)

Virtual reality traffic prioritization for Wi-Fi quality of service improvement using machine learning classification techniques

  • Shaabanzadeh, Seyedeh Soheila
  • Carrascosa Zamacois, Marc
  • Sánchez González, Juan|||0000-0002-2415-9628
  • Michaelides, Costas
  • Bellalta Jiménez, Boris|||0000-0002-7826-3703
The increase in the demand for eXtended Reality (XR)/Virtual Reality (VR) services in the recent years, poses a great challenge for Wi-Fi networks to maintain the strict latency requirements. In VR over Wi-Fi, latency is a significant issue. In fact, VR users expect instantaneous responses to their interactions, and any noticeable delay can disrupt user experience. Such disruptions can cause motion sickness, and users might end up quitting the service. Differentiating interactive VR traffic from Non-VR traffic within a Wi-Fi network can aim to decrease latency for VR users and improve Wi-Fi Quality of Service (QoS) with giving priority to VR users in the access point (AP) and efficiently handle VR traffic. In this paper, we propose a machine learning-based approach for identifying interactive VR traffic in a Cloud-Edge VR scenario. The correlation between downlink and uplink is crucial in our study. First, we extract features from single-user traffic characteristics and then, we compare six common classification techniques (i.e., Logistic Regression, Support Vector Machines, k-Nearest Neighbors, Decision Trees, Random Forest, and Naive Bayes). For each classifier, a process of hyperparameter tuning and feature selection, namely permutation importance is applied. The model created is evaluated using datasets generated by different VR applications, including both single and multi-user cases. Then, a Wi-Fi network simulator is used to analyze the VR traffic identification and prioritization QoS improvements. Our simulation results show that we successfully reduce VR traffic delays by a factor of 4.2x compared to scenarios without prioritization, while incurring only a 2.3x increase in delay for background (BG) traffic related to Non-VR services., This work is partially funded by Wi-XR PID2021-123995NB-I00 (MCIU/AEI/FEDER,UE), MAX-R ( 101070072 ) EU, SGR 00955-2021 AGAUR, and by MCIN/AEI under the Maria de Maeztu Units of Excellence Programme ( CEX2021-001195-M ). This paper has also been partially funded by the Spanish Ministry of Science and Innovation MCIN/AEI/10.13039/501100011033 under ARTIST project (ref. PID2020- 115104RB-I00 )., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publication Artículo científico (JournalArticle)

A deep Q-network-based algorithm for multi-connectivity optimization in heterogeneous cellular-networks †

  • Hernández Carlón, Juan Jesús
  • Pérez Romero, Jordi|||0000-0001-9131-5013
  • Sallent Roig, Oriol|||0000-0002-2114-1406
  • Vilà Muñoz, Irene|||0000-0002-7086-9591
  • Casadevall Palacio, Fernando José|||0000-0001-5385-872X
The use of multi-connectivity has become a useful tool to manage the traffic in heterogeneous cellular network deployments, since it allows a device to be simultaneously connected to multiple cells. The proper exploitation of this technique requires to adequately configure the traffic sent through each cell depending on the experienced conditions. This motivates this work, which tackles the problem of how to optimally split the traffic among the cells when the multi-connectivity feature is used. To this end, the paper proposes the use of a deep reinforcement learning solution based on a Deep Q-Network (DQN) in order to determine the amount of traffic of a device that needs to be delivered through each cell, making the decision as a function of the current traffic and radio conditions. The obtained results show a near-optimal performance of the DQN-based solution with an average difference of only 3.9% in terms of reward with respect to the optimum strategy. Moreover, the solution clearly outperforms a reference scheme based on Signal to Interference Noise Ratio (SINR) with differences of up to 50% in terms of reward and up to 166% in terms of throughput for certain situations. Overall, the presented results show the promising performance of the DQN-based approach that establishes a basis for further research in the topic of multi-connectivity and for the application of this type of techniques in other problems of the radio access network, This paper is part of ARTIST project (ref. PID2020-115104RB-I00) funded by MCIN/AEI/10.13039/501100011033. The work is also funded by the Spanish Ministry of Science and Innovation under grant ref. PRE2018-084691., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publication Artículo científico (JournalArticle)

A tutorial on the characterisation and modelling of low layer functional splits for flexible radio access networks in 5G and beyond

  • Pérez Romero, Jordi|||0000-0001-9131-5013
  • Sallent Roig, Oriol|||0000-0002-2114-1406
  • Gelonch Bosch, Antonio José|||0000-0001-9216-1140
  • Gelabert Doran, Xavier
  • Klaiqi, Bleron
  • Kahn, Marcus
  • Campoy García, David|||0009-0004-3135-3834
The centralization of baseband (BB) functions in a radio access network (RAN) towards data processing centres is receiving increasing interest as it enables the exploitation of resource pooling and statistical multiplexing gains among multiple cells, facilitates the introduction of collaborative techniques for different functions (e.g., interference coordination), and more efficiently handles the complex requirements of advanced features of the fifth generation (5G) new radio (NR) physical layer, such as the use of massive multiple input multiple output (MIMO). However, deciding the functional split (i.e., which BB functions are kept close to the radio units and which BB functions are centralized) embraces a trade-off between the centralization benefits and the fronthaul costs for carrying data between distributed antennas and data processing centres. Substantial research efforts have been made in standardization fora, research projects and studies to resolve this trade-off, which becomes more complicated when the choice of functional splits is dynamically achieved depending on the current conditions in the RAN. This paper presents a comprehensive tutorial on the characterisation, modelling and assessment of functional splits in a flexible RAN to establish a solid basis for the future development of algorithmic solutions of dynamic functional split optimisation in 5G and beyond systems. First, the paper explores the functional split approaches considered by different industrial fora, analysing their equivalences and differences in terminology. Second, the paper presents a harmonized analysis of the different BB functions at the physical layer and associated algorithmic solutions presented in the literature, assessing both the computational complexity and the associated performance. Based on this analysis, the paper presents a model for assessing the computational requirements and fronthaul bandwidth requirements of different functional splits. Last, the model is used to derive illustrative results that identify the major trade-offs that arise when selecting a functional split and the key elements that impact the requirements., This work has been partially funded by Huawei Technologies. Work by X. Gelabert and B. Klaiqi is partially funded by the European Union's Horizon Europe research and innovation programme (HORIZON-MSCA-2021-DN-0) under the Marie Skłodowska-Curie grant agreement No 101073265. Work by J. Perez-Romero and O. Sallent is also partially funded by the Smart Networks and Services Joint Undertaking (SNS JU) under the European Union’s Horizon Europe research and innovation programme under Grant Agreements No. 101096034 (VERGE project) and No. 101097083 (BeGREEN project) and by the Spanish Ministry of Science and Innovation MCIN/AEI/10.13039/501100011033 under ARTIST project (ref. PID2020-115104RB-I00). This last project has also funded the work by D. Campoy., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publication Artículo científico (JournalArticle)

Deep Learning-based algorithm for optimizing relay user equipment activation in 5G cellular networks

  • Hernández Carlón, Juan Jesús
  • Pérez Romero, Jordi|||0000-0001-9131-5013
  • Sallent Roig, Oriol|||0000-0002-2114-1406
  • Vilà Muñoz, Irene|||0000-0002-7086-9591
  • Casadevall Palacio, Fernando José|||0000-0001-5385-872X
This paper addresses the problem of optimally using the relay capabilities of user equipment (UE) to augment the radio access network (RAN) in 5G deployments and beyond. This can be particularly useful in coverage constrained scenarios, such as those using millimeter waves, due to the difficulty radio signals penetrate some structures. This can lead to signal blockages and high penetration losses when providing outdoor-to-indoor coverage. To overcome these limitations, the use of relay UEs (RUEs) is seen as a possible solution to effectively extend the coverage of a cellular network. In this context, this paper proposes a deep learning-based algorithm to optimize the decision regarding when RUEs should be activated and deactivated in accordance with the benefits they can provide for increasing the spectral efficiency and decreasing outage probability for the network users. The obtained results reveal a promising capability of the proposed solution to activate the most beneficial RUEs given the network conditions being experienced, leading to improvements of average spectral efficiency of 12.3% and reductions of outage probability of 89% with respect to the case without relays., FUNDING: This work was supported in part by the Smart Networks and Services Joint Undertaking (SNS JU) under the European Union’s Horizon Europe research and innovation programme under Grant Agreements No. 101096034 (VERGE project) and No. 101097083 (BeGREEN project) and in part by the Spanish Ministry of Science and Innovation MCIN/AEI/10.13039/501100011033 under ARTIST project (ref. PID2020-115104RB-I00). The work of J.J. Hernández-Carlón was supported by the Spanish Ministry of Science and Innovation under grant ref. PRE2018-084691. The work of I. Vilà was supported by the European Union-NextGenerationEU, Spanish Ministry of Universities and the Plan for Recovery,, Peer Reviewed
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

Deep Learning-based algorithm for optimizing relay user equipment activation in 5G cellular networks

  • Hernández Carlón, Juan Jesús
  • Pérez Romero, Jordi
  • Sallent Roig, Oriol
  • Vilà Muñoz, Irene
  • Casadevall Palacio, Fernando José
This paper addresses the problem of optimally using the relay capabilities of user equipment (UE) to augment the radio access network (RAN) in 5G deployments and beyond. This can be particularly useful in coverage constrained scenarios, such as those using millimeter waves, due to the difficulty radio signals penetrate some structures. This can lead to signal blockages and high penetration losses when providing outdoor-to-indoor coverage. To overcome these limitations, the use of relay UEs (RUEs) is seen as a possible solution to effectively extend the coverage of a cellular network. In this context, this paper proposes a deep learning-based algorithm to optimize the decision regarding when RUEs should be activated and deactivated in accordance with the benefits they can provide for increasing the spectral efficiency and decreasing outage probability for the network users. The obtained results reveal a promising capability of the proposed solution to activate the most beneficial RUEs given the network conditions being experienced, leading to improvements of average spectral efficiency of 12.3% and reductions of outage probability of 89% with respect to the case without relays., FUNDING: This work was supported in part by the Smart Networks and Services Joint Undertaking (SNS JU) under the European Union’s Horizon Europe research and innovation programme under Grant Agreements No. 101096034 (VERGE project) and No. 101097083 (BeGREEN project) and in part by the Spanish Ministry of Science and Innovation MCIN/AEI/10.13039/501100011033 under ARTIST project (ref. PID2020-115104RB-I00). The work of J.J. Hernández-Carlón was supported by the Spanish Ministry of Science and Innovation under grant ref. PRE2018-084691. The work of I. Vilà was supported by the European Union-NextGenerationEU, Spanish Ministry of Universities and the Plan for Recovery,, Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

A deep Q-network-based algorithm for multi-connectivity optimization in heterogeneous cellular-networks †

  • Hernández Carlón, Juan Jesús
  • Pérez Romero, Jordi
  • Sallent Roig, Oriol
  • Vilà Muñoz, Irene
  • Casadevall Palacio, Fernando José
The use of multi-connectivity has become a useful tool to manage the traffic in heterogeneous cellular network deployments, since it allows a device to be simultaneously connected to multiple cells. The proper exploitation of this technique requires to adequately configure the traffic sent through each cell depending on the experienced conditions. This motivates this work, which tackles the problem of how to optimally split the traffic among the cells when the multi-connectivity feature is used. To this end, the paper proposes the use of a deep reinforcement learning solution based on a Deep Q-Network (DQN) in order to determine the amount of traffic of a device that needs to be delivered through each cell, making the decision as a function of the current traffic and radio conditions. The obtained results show a near-optimal performance of the DQN-based solution with an average difference of only 3.9% in terms of reward with respect to the optimum strategy. Moreover, the solution clearly outperforms a reference scheme based on Signal to Interference Noise Ratio (SINR) with differences of up to 50% in terms of reward and up to 166% in terms of throughput for certain situations. Overall, the presented results show the promising performance of the DQN-based approach that establishes a basis for further research in the topic of multi-connectivity and for the application of this type of techniques in other problems of the radio access network, This paper is part of ARTIST project (ref. PID2020-115104RB-I00) funded by MCIN/AEI/10.13039/501100011033. The work is also funded by the Spanish Ministry of Science and Innovation under grant ref. PRE2018-084691., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

A spatio-temporal prediction methodology based on deep learning and real Wi-Fi measurements

  • Shaabanzadeh, Seyedeh Soheila
  • Sánchez González, Juan
The rapid development of Wi-Fi technologies in recent years has caused a significant increase in the traffic usage. Hence, knowledge obtained from Wi-Fi network measurements can be helpful for a more efficient network management. In this paper, we propose a methodology to predict future values of some specific network metrics (e.g. traffic load, transmission failures, etc.). These predictions may be useful for improving the network performance. After data collection and preprocessing, the correlation between each target access point (AP) and its neighbouring APs is estimated. According to these correlations, either an only-temporal or a spatio-temporal based prediction is done. To evaluate the proposed methodology, real measurements are collected from 100 APs deployed in different university buildings for 3 months. Deep Learning (DL) methods (i.e. Convolutional Neural Network (CNN), Simple Recurrent Neural Network (SRNN), Gated Recurrent Unit (GRU), Long Short-Term Memory (LSTM), Transformer) are evaluated and compared for both temporal and spatio-temporal based predictions. Moreover, a hybrid prediction methodology is proposed using a spatial processing based on CNN and a temporal prediction based on RNN. The proposed hybrid methodology provides an improvement in the prediction accuracy at expenses of a slight increase in the Training Computational Time (TCT) and negligible in Prediction Computational Time (PCT)., This paper has been funded by the Spanish Ministry of Science and Innovation MCIN/AEI/10.13039/501100011033 under ARTIST project (ref. PID2020-115104RB-I00)., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

A tutorial on the characterisation and modelling of low layer functional splits for flexible radio access networks in 5G and beyond

  • Pérez Romero, Jordi
  • Sallent Roig, Oriol
  • Gelonch Bosch, Antonio José
  • Gelabert Doran, Xavier
  • Klaiqi, Bleron
  • Kahn, Marcus
  • Campoy García, David
The centralization of baseband (BB) functions in a radio access network (RAN) towards data processing centres is receiving increasing interest as it enables the exploitation of resource pooling and statistical multiplexing gains among multiple cells, facilitates the introduction of collaborative techniques for different functions (e.g., interference coordination), and more efficiently handles the complex requirements of advanced features of the fifth generation (5G) new radio (NR) physical layer, such as the use of massive multiple input multiple output (MIMO). However, deciding the functional split (i.e., which BB functions are kept close to the radio units and which BB functions are centralized) embraces a trade-off between the centralization benefits and the fronthaul costs for carrying data between distributed antennas and data processing centres. Substantial research efforts have been made in standardization fora, research projects and studies to resolve this trade-off, which becomes more complicated when the choice of functional splits is dynamically achieved depending on the current conditions in the RAN. This paper presents a comprehensive tutorial on the characterisation, modelling and assessment of functional splits in a flexible RAN to establish a solid basis for the future development of algorithmic solutions of dynamic functional split optimisation in 5G and beyond systems. First, the paper explores the functional split approaches considered by different industrial fora, analysing their equivalences and differences in terminology. Second, the paper presents a harmonized analysis of the different BB functions at the physical layer and associated algorithmic solutions presented in the literature, assessing both the computational complexity and the associated performance. Based on this analysis, the paper presents a model for assessing the computational requirements and fronthaul bandwidth requirements of different functional splits. Last, the model is used to derive illustrative results that identify the major trade-offs that arise when selecting a functional split and the key elements that impact the requirements., This work has been partially funded by Huawei Technologies. Work by X. Gelabert and B. Klaiqi is partially funded by the European Union's Horizon Europe research and innovation programme (HORIZON-MSCA-2021-DN-0) under the Marie Skłodowska-Curie grant agreement No 101073265. Work by J. Perez-Romero and O. Sallent is also partially funded by the Smart Networks and Services Joint Undertaking (SNS JU) under the European Union’s Horizon Europe research and innovation programme under Grant Agreements No. 101096034 (VERGE project) and No. 101097083 (BeGREEN project) and by the Spanish Ministry of Science and Innovation MCIN/AEI/10.13039/501100011033 under ARTIST project (ref. PID2020-115104RB-I00). This last project has also funded the work by D. Campoy., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

Virtual reality traffic prioritization for Wi-Fi quality of service improvement using machine learning classification techniques

  • Shaabanzadeh, Seyedeh Soheila
  • Carrascosa Zamacois, Marc
  • Sánchez González, Juan
  • Michaelides, Costas
  • Bellalta Jiménez, Boris
The increase in the demand for eXtended Reality (XR)/Virtual Reality (VR) services in the recent years, poses a great challenge for Wi-Fi networks to maintain the strict latency requirements. In VR over Wi-Fi, latency is a significant issue. In fact, VR users expect instantaneous responses to their interactions, and any noticeable delay can disrupt user experience. Such disruptions can cause motion sickness, and users might end up quitting the service. Differentiating interactive VR traffic from Non-VR traffic within a Wi-Fi network can aim to decrease latency for VR users and improve Wi-Fi Quality of Service (QoS) with giving priority to VR users in the access point (AP) and efficiently handle VR traffic. In this paper, we propose a machine learning-based approach for identifying interactive VR traffic in a Cloud-Edge VR scenario. The correlation between downlink and uplink is crucial in our study. First, we extract features from single-user traffic characteristics and then, we compare six common classification techniques (i.e., Logistic Regression, Support Vector Machines, k-Nearest Neighbors, Decision Trees, Random Forest, and Naive Bayes). For each classifier, a process of hyperparameter tuning and feature selection, namely permutation importance is applied. The model created is evaluated using datasets generated by different VR applications, including both single and multi-user cases. Then, a Wi-Fi network simulator is used to analyze the VR traffic identification and prioritization QoS improvements. Our simulation results show that we successfully reduce VR traffic delays by a factor of 4.2x compared to scenarios without prioritization, while incurring only a 2.3x increase in delay for background (BG) traffic related to Non-VR services., This work is partially funded by Wi-XR PID2021-123995NB-I00 (MCIU/AEI/FEDER,UE), MAX-R ( 101070072 ) EU, SGR 00955-2021 AGAUR, and by MCIN/AEI under the Maria de Maeztu Units of Excellence Programme ( CEX2021-001195-M ). This paper has also been partially funded by the Spanish Ministry of Science and Innovation MCIN/AEI/10.13039/501100011033 under ARTIST project (ref. PID2020- 115104RB-I00 )., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

Relay-empowered beyond 5G radio access networks with edge computing capabilities

  • Vilà Muñoz, Irene
  • Sallent Roig, Oriol
  • Pérez Romero, Jordi
Relevant services envisaged for beyond 5G (B5G) systems, such as extended reality and holographic communications, have extremely demanding user experience requirements with significant computational and communication demands. While edge computing aims to address the computation requirements by offloading the computational tasks to edge servers near the user, the communication will take advantage of the technologies developed for 5G New Radio jointly with an never-before-seen degree of network densification. This paper proposes the use of relays with edge computing capabilities. The approach's potential for B5G are identified, and a system model is defined to characterize both computational and communications viewpoints. Based on this, results are provided to highlight the gains and limitations of the proposed approach from a system-level perspective. Finally, the main challenges for enabling relays with computing capabilities in B5G deployments are discussed., This work is part of VERGE project, which has received funding from the Smart Networks and Services Joint Undertaking under the European Union’s Horizon Europe research and innovation programme under Grant Agreement 101096034. Views and opinions expressed are however those of the authors only and do not necessarily reflect those of the European Union. Neither the European Union nor the granting authority can be held responsible for them. This paper has also been partly funded by the Spanish Ministry of Science and Innovation MCIN/AEI/ 10.13039/501100011033 under ARTIST project (ref. PID2020- 115104RB-I00). The work of Irene Vila ` has been funded by the European Union-NextGenerationEU, the Spanish Ministry of Universities and the Plan for Recovery, Transformation and Resilience, through the call for Margarita Salas Grants of the Universitat Politècnica de Catalunya (ref. 2022UPC-MSC- 94079)., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

On exploiting user equipment relaying capabilities in beyond 5G networks: opportunities, challenges, and road map

  • Pérez Romero, Jordi
  • Sallent Roig, Oriol
  • Ruiz García, Olga
Mobile Network Operators are facing significant expenditures in deploying 5G Radio Access Network (RAN) infrastructure to achieve the level of densification required for meeting the new services demands. This will be exacerbated in Beyond 5G scenarios, which envisage the operation in high frequency bands with poor propagation. Therefore, operators need to find new and cost-efficient ways of managing and deploying their infrastructure. In this context, sustained on the technological evolution of the User Equipment (UE) and on recent standardization initiatives, this paper proposes an upgraded Beyond 5G system based on augmenting the RAN through the exploitation of UE-to-network relaying capabilities for optimizing the coverage footprint and for bringing edge computing capabilities closer to the users. The paper presents the baseline enabling technologies for realizing this concept. discusses the key architectural requirements and challenges for each one and presents a possible implementation roadmap, supported by some evaluation results, which reflect that relaying can improve the throughput in a factor 6 and reduce outage probability in around 80%., This article is part of the ARTIST project (Reference PID2020-115104RB-I00), funded by the Spanish Ministry of Science and Innovation, under Grant MCIN/AEI/10.13039/501100011033. The article is also part of the VERGE project, which has received funding from the Smart Networks and Services Joint Undertaking, under the European Union’s Horizon Europe research and innovation program, under Grant 101096034., Peer Reviewed, Postprint (author's final draft)