Skip to main content

CARTOGRAFIADO ESPECTRAL Y ESTRUCTURAL 3D DE COMBUSTIBLE MEDITERRANEO PARA LA MODELIZACION DEL COMPORTAMIENTO DEL FUEGO

PID2020-117808RB-C21

•
Funding agency name Agencia Estatal de Investigación
Funding agency acronym AEI
Program Programa Estatal de I+D+i Orientado a los Retos de la Sociedad
Call Proyectos de I+D+i (Generación de Conocimiento y Retos Investigación)
Call year 2020
State Plan 2017-2020 Plan Estatal de Investigación Científica y Técnica y de Innovación
Beneficiary centre UNIVERSITAT POLITÈCNICA DE VALÈNCIA

Resultados relacionados

Resultados totales (Incluyendo duplicados): 9
Encontrada(s) 1 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Analyzing TLS Scan Distribution and Point Density for the Estimation of Forest Stand Structural Parameters

  • Torralba, Jesús|||0000-0001-8644-8604
  • Carbonell-Rivera, Juan Pedro|||0000-0002-6724-6780
  • Ruiz Fernández, Luis Ángel|||0000-0003-0073-7259
  • Crespo-Peremarch, Pablo|||0000-0003-2241-4493
[EN] In recent decades, the feasibility of using terrestrial laser scanning (TLS) in forest inventories was investigated as a replacement for time-consuming traditional field measurements. However, the optimal acquisition of point clouds requires the definition of the minimum point density, as well as the sensor positions within the plot. This paper analyzes the effect of (i) the number and distribution of scans, and (ii) the point density on the estimation of seven forest parameters: above-ground biomass, basal area, canopy base height, dominant height, stocking density, quadratic mean diameter, and stand density index. For this purpose, 31 combinations of TLS scan positions, from a single scan in the center of the plot to nine scans, were analyzed in 28 circular plots in a Mediterranean forest. Afterwards, multiple linear regression models using height metrics extracted from the TLS point clouds were generated for each combination. In order to study the influence of terrain slope on the estimation of forest parameters, the analysis was performed by using all the plots and by creating two categories of plots according to their terrain slope (slight or steep). Results indicate that the use of multiple scans improves the estimation of forest parameters compared to using a single one, although using more than three to five scans does not necessarily improves the accuracy. Moreover, it is also shown that lower accuracies are obtained in plots with steep slope. In addition, it was observed that each forest parameter has a strategic distribution depending on the field of view of the TLS. Regarding the point density analysis, the use of 1% to 0.1% (¿136 points·m¿2) of the initial point cloud density (¿37,240.86 points·m¿2) generates an R2adj difference of less than 0.01. These findings are useful for planning more efficient forest inventories, reducing acquisition and processing time as well as costs., This research has been funded by the project PID2020-117808RB-C21 MCIN/AEI/10.13039/501100011033 and by the grant PEJ2018-002924-A Fondo de Garantia Juvenil en I+D+i ESF Investing in your future.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Towards in-field live fuel moisture content estimation using multi-wavelength terrestrial laser scanning

  • Torralba, Jesús|||0000-0001-8644-8604
  • Ruiz Fernández, Luis Ángel|||0000-0003-0073-7259
  • Crespo-Peremarch, Pablo|||0000-0003-2241-4493
  • Carbonell-Rivera, Juan Pedro|||0000-0002-6724-6780
  • Danson, F. Mark
  • Almonacid-Caballer, Jaime
[EN] The impact of climate change on vegetation dynamics and wildfire risk has been a subject of considerable research interest. Live fuel moisture content (LFMC) is a critical factor in assessing fire risk and influencing fire ignition and behaviour. Satellite remote sensing techniques provide information on LMFC dynamics, but spatial and temporal resolution hinder understanding in structurally complex forests with interconnected tree and shrub layers. Multi-wavelength terrestrial laser scanning (TLS) sensors can measure the structural and spectral properties of forests and have demonstrated their potential for monitoring LFMC. However, studies of LFMC in shrubs are scarce despite their key role in fire spread. In this study, we investigated the capacity of a dual-wavelength SALCA (Salford Advanced Laser Canopy Analyser) TLS (1063 and 1545 nm) and the single-wavelength Trimble X6 (1500 nm) to estimate LFMC in six Mediterranean forest plots (135 individual plants, 18 species). Analysis at different separate plots and individual-species levels identified key factors affecting LFMC prediction using TLS. At plot level, linking spectral indices and LFMC is challenging due to species diversity in crown structures, ages, sizes and leaf types. Our results suggest that detector heating by solar radiation could alter the sensor calibration and reduce model accuracy. Nevertheless, in some areas the multiple linear regression models achieved an R2adj up to 0.82 and an RMSE of 7.66%. At the species level, models showed stronger relationships with LFMC (R2adj ranging from 0.43 to 0.88) and a relatively low RMSE (RMSE from 1.92 to 3.97%). Overall, univariate relationships between LFMC and individual-wavelength reflectance were not consistent across species or most plots. Considering these results, combining the capacity of dual TLS devices to estimate LFMC with the structural information that they provide, open a potential to improve field work sampling for wildfire risk assessment. Extending the research to cover a wider range of tree, shrub and herbaceous species in the future will advance our understanding of LFMC dynamics and contribute to more accurate fire behaviour modelling., The author(s) declared that financial support was received for this work and/or its publication. This research is part of the grants PID2020-117808RB-C21 and PID2024-158591OB-I00, funded by MICIU/AEI/10.13039/501100011033 and the European Social Fund Plus (ESF+). Funding for open access charge: Universitat Politècnica de València (PAID-12-25).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Species-specific aboveground biomass estimation using semantic segmentation of UAV photogrammetric point clouds

  • Carbonell-Rivera, Juan Pedro|||0000-0002-6724-6780
  • Ruiz Fernández, Luis Ángel|||0000-0003-0073-7259
  • Estornell Cremades, Javier|||0000-0003-0854-5358
  • Torralba, Jesús|||0000-0001-8644-8604
[EN] Accurate, species-specific estimation of aboveground biomass (AGB) at the individual plant level is essential for characterizing forest structure, supporting ecological and wildfire modelling, and enabling fine-scale carbon accounting. This study presents a methodological framework for estimating species-specific AGB at individual plant level in Mediterranean ecosystems using UAV-based digital aerial photogrammetry (UAV-DAP). High-resolution point clouds were processed through a multi-step workflow including object-based segmentation, thirteen species classification and AGB regression modeling. The overall accuracy of species classification across six study areas was 81.6%, with a maximum of 89.9%. The regression models for AGB estimation yielded an average R2 of 0.69 across all species, highlighting species such as Anthyllis cytisoides (R2 = 0.83, RMSE = 0.07 kg, n = 47), Juniperus oxycedrus (R2 = 0.83, RMSE = 3.17 kg, n = 32); or Pinus halepensis (R2 = 0.77, RMSE = 11.79 kg, n = 20). These findings demonstrate the potential of UAV-DAP for practical estimates of AGB. The study underscores UAV-DAP as a cost-effective tool for forest management, ecological monitoring, and biomass assessments, paving the way for broader applications in environmental science and resource management., This research has been supported by the grants BES-2017-081920 and PID2020-117808RB-C21 funded by MCIN/AEI/10.13039/501100011033 and by ESF Investing in your future.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Classification of Mediterranean Shrub Species from UAV Point Clouds

  • Carbonell-Rivera, Juan Pedro|||0000-0002-6724-6780
  • Torralba, Jesús|||0000-0001-8644-8604
  • Estornell Cremades, Javier|||0000-0003-0854-5358
  • Ruiz Fernández, Luis Ángel|||0000-0003-0073-7259
  • Crespo-Peremarch, Pablo|||0000-0003-2241-4493
[EN] Modelling fire behaviour in forest fires is based on meteorological, topographical, and vegetation data, including species¿ type. To accurately parameterise these models, an inventory of the area of analysis with the maximum spatial and temporal resolution is required. This study investigated the use of UAV-based digital aerial photogrammetry (UAV-DAP) point clouds to classify tree and shrub species in Mediterranean forests, and this information is key for the correct generation of wildfire models. In July 2020, two test sites located in the Natural Park of Sierra Calderona (eastern Spain) were analysed, registering 1036 vegetation individuals as reference data, corresponding to 11 shrub and one tree species. Meanwhile, photogrammetric flights were carried out over the test sites, using a UAV DJI Inspire 2 equipped with a Micasense RedEdge multispectral camera. Geometrical, spectral, and neighbour-based features were obtained from the resulting point cloud generated. Using these features, points belonging to tree and shrub species were classified using several machine learning methods, i.e., Decision Trees, Extra Trees, Gradient Boosting, Random Forest, and MultiLayer Perceptron. The best results were obtained using Gradient Boosting, with a mean cross-validation accuracy of 81.7% and 91.5% for test sites 1 and 2, respectively. Once the best classifier was selected, classified points were clustered based on their geometry and tested with evaluation data, and overall accuracies of 81.9% and 96.4% were obtained for test sites 1 and 2, respectively. Results showed that the use of UAV-DAP allows the classification of Mediterranean tree and shrub species. This technique opens a wide range of possibilities, including the identification of species as a first step for further extraction of structure and fuel variables as input for wildfire behaviour models., Grants BES-2017-081920 and PID2020-117808RB-C21 funded by MCIN/AEI/10.13039/5011 00011033 and by ESF Investing in your future.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Class3Dp: A supervised classifier of vegetation species from point clouds

  • Carbonell-Rivera, Juan Pedro|||0000-0002-6724-6780
  • Estornell Cremades, Javier|||0000-0003-0854-5358
  • Ruiz Fernández, Luis Ángel|||0000-0003-0073-7259
  • Crespo-Peremarch, Pablo|||0000-0003-2241-4493
  • Torralba, Jesús|||0000-0001-8644-8604
  • Almonacid-Caballer, Jaime
[EN] Recognizing the species composition of an ecosystem is essential for conservation and land management. This study presents the software Class3Dp, a supervised classifier of vegetation species for coloured point clouds. Class3Dp is run through a graphical user interface (GUI) that allows for the selection of training samples from RGB or MS (multispectral) clouds and their classification based on geometric, spectral and neighbourhood features, along with different machine learning methods, obtaining the point cloud classified according to the classes (species) introduced. A case study is shown where a classification of ground and vegetation is carried out, obtaining an overall accuracy (OA) of 0.94 in the RGB classification and 0.95 in the MS. Points classified as vegetation were re-classified in the species Anthyllis cytisoides L., Chamaerops humilis L., Cistus monspeliensis L., Pistacia lentiscus L. and Quercus coccifera L., obtaining an OA of 0.86 in the RGB classification and 0.87 in the MS., This research has been supported by the grants BES-2017-081920 and PID2020-117808RB-C21 funded by MCIN/AEI/10.13039/501100011033 and by ESF Investing in your future. Funding for open access charge: Universitat Politècnica de València.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Evaluating the performance of spectral indices and meteorological variables as indicators of live fuel moisture content in Mediterranean shrublands

  • Arcos-Villacís, María Alicia
  • Balaguer-Beser, Ángel|||0000-0003-0039-2641
  • Ruiz Fernández, Luis Ángel|||0000-0003-0073-7259
[EN] This article presents a methodology to estimate the live fuel moisture content (LFMC), a critical factor in the spread of forest fires, through machine learning tools. Random forest models were trained using field LFMC samples collected bi-weekly for 18 consecutive months in 43 shrubland plots in the Valencian region, a Mediterranean zone in eastern Spain. LFMC predictions were obtained for the weighted average of LFMC values, calculated using the Fraction of Canopy Cover (FCC) of dominant species as weights. Furthermore, a specific model was defined for predicting LFMC for the Rosmarinus officinalis species. A Forward Feature Selection (FFS) with a Leave-Location-Out Cross Validation (LLOCV) method was used to select predictors extracted from a spatiotemporal data set, which includes different spectral indices obtained from Sentinel-2 imagery and meteorological variables obtained from measurements at weather stations, along with other seasonal, geographical or topographic variables. Model predictions were validated with a LLOCV procedure, and also using independent field measurements of LFMC in another period with changes in the precipitation regime and average temperatures. Variables selected by FFS for the two LFMC models were: the cumulative precipitation in the previous 60 days (p60), the average of the daily mean temperature in the previous 60 days (t60), together with the Y-UTM coordinate and the sine and cosine of the day of the year. LFMC predictions for the weighted average of LFMC values also introduced the Transformed Chlorophyll Absorption Ratio Index (TCARI), resulting in an R2 of 68.1%. However, LFMC for the Rosmarinus officinalis species used the ratio between TCARI and the Optimized SoilAdjusted Vegetation Index (OSAVI), in addition to the average daily minimum relative humidity in the 15 days prior to the date considered (R2 = 74.9 %). LFMC time series analysis showed that the general trend of LFMC measures is satisfactorily captured by the predictions. Spatial and temporal variations in LFMC were analyzed throughout thematic maps in the studied area during the wildfire season., Ma Alicia Arcos gives thanks for the help received by the Universitat Politecnica de Valencia through a pre-doctoral contract financed in the call, PAID-01-19, subprogram 1, and the open access charge: Universitat Politecnica de Valencia (PAID-12-23) . This research was funded by through a collaboration agreement between the company Red Electrica de Espana S.A.U. and the Universitat Politecnica de Valencia (2020-2023) , as well as the research project PID2020-117808RB-C21 funded by MCIN/AEI/10.13039/501100011033 and by ESF Investing in your future.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Integrating TLS-derived forest scenarios in FDS and sensitivity analysis of wind and fuel moisture on fire behavior

  • Simo-Marti, Marina|||0000-0001-9605-9645
  • Crespo-Peremarch, Pablo|||0000-0003-2241-4493
  • Torralba, Jesús|||0000-0001-8644-8604
  • Ruiz Fernández, Luis Ángel|||0000-0003-0073-7259
  • Mell, William
[EN] Incorporating explicit spatial heterogeneity in fuel characterization will reduce uncertainty in fire modelling, especially in Mediterranean forests which are characterized by complex structures. We provide a reproducible workflow to integrate bulk density estimates derived from terrestrial laser scanner (TLS) data into Fire Dynamics Simulator (FDS), and evaluate fire behavior sensitivity to wind speed and fuel moisture content (FMC) in two Mediterranean forest plots. The methodology incorporates the 3D fuel distribution into FDS derived from point clouds. 210 simulations were conducted by modifying wind speed and vegetation FMC. Results confirm the strong negative effect of FMC on fire behavior, the positive effect of wind on fire propagation, and evidencing the importance of their combined effect. Fire behavior sensitivity proved to be strongly scenario-dependent, demonstrating that structural heterogeneity plays a critical role with direct implications for assessing fire propagation probability under varying moisture and wind regimes in real forest stands., This research was funded by grant PRE2021-099526 and projects I+D+I PID2020-117808RB-C21 and PID2024-158591OB-I00, funded by MCIN/AEI/ 10.13039/ 501100011033 and FSE+. Funding for open access charge: Universitat Politecnica de Valencia.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Analyzing Independent LFMC Empirical Models in the Mid-Mediterranean Region of Spain Attending to Vegetation Types and Bioclimatic Zones

  • Arcos-Villacís, María Alicia
  • Edo-Botella, Roberto
  • Balaguer-Beser, Ángel|||0000-0003-0039-2641
  • Ruiz Fernández, Luis Ángel|||0000-0003-0073-7259
[EN] This paper presents empirical models developed through stepwise multiple linear regression to estimate the live fuel moisture content (LFMC) in a Mediterranean area. The models are based on LFMC data measured in 50 field plots, considering four groups with similar bioclimatic characteristics and vegetation types (trees and shrubs). We also applied a species-specific LFMC model for Rosmarinus officinalis in plots with this dominant species. Spectral indices extracted from Sentinel-2 images and their averages over the study time period in each plot with a spatial resolution of 10 m were used as predictors, together with interpolated meteorological, topographic, and seasonal variables. The models achieved adjusted R2 values ranging between 52.1% and 74.4%. Spatial and temporal variations of LFMC in shrub areas were represented on a map. The results highlight the feasibility of developing satellite-derived LFMC operational empirical models in areas with various vegetation types and taking into account bioclimatic zones. The adjustment of data through GAM (generalized additive models) is also addressed in this study. The different error metrics obtained reflect that these models provided a better fit (most adjusted R2 values ranged between 65% and 74.1%) than the linear models, due to GAMs being more versatile and suitable for addressing complex problems such as LFMC behavior., Ma Alicia Arcos gives thanks for the help received by the Universitat Politecnica de Valencia through a pre-doctoral contract financed in the call, PAID-01-19, subprogram 1. This research was funded by through a collaboration agreement between the company Red Electrica de Espana S.A.U. and the Universitat Politecnica de Valencia (2020-2023), as well as the research project PID2020-117808RB-C21 funded by MCIN/AEI/10.13039/501100011033 and by ESF Investing in your future.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Relationships of Fire Rate of Spread with Spectral and Geometric Features Derived from UAV-Based Photogrammetric Point Clouds

  • Carbonell-Rivera, Juan Pedro|||0000-0002-6724-6780
  • Ruiz Fernández, Luis Ángel|||0000-0003-0073-7259
  • Torralba, Jesús|||0000-0001-8644-8604
  • Estornell Cremades, Javier|||0000-0003-0854-5358
  • Moran, Christopher J.
  • Seielstad, Carl A.
  • Parsons, Russell A.
  • Hoff, Valentijn
[EN] Unmanned aerial vehicles (UAVs) equipped with RGB, multispectral, or thermal cameras have demonstrated their potential to provide high-resolution data before, during, and after wildfires and prescribed burns. Pre-burn point clouds generated through the photogrammetric processing of UAV images contain geometrical and spectral information of vegetation, while active fire imagery allows for deriving fire behavior metrics. This paper focuses on characterizing the relationship between the fire rate of spread (RoS) in prescribed burns and a set of independent geometrical, spectral, and neighborhood variables extracted from UAV-derived point clouds. For this purpose, different flights were performed before and during the prescribed burning in seven grasslands and open forest plots. Variables extracted from the point cloud were interpolated to a grid, which was sized according to the RoS semivariogram. Random Forest regressions were applied, obtaining up to 0.56 of R2 in the different plots studied. Geometric variables from the point clouds, such as planarity and the spectral normalized blue¿red difference index (NBRDI), are related to fire RoS. In analyzing the results, the minimum value of the eigenentropy (Eigenentropy_MIN), the mean value of the planarity (Planarity_MEAN), and percentile 75 of the NBRDI (NBRDI_P75) obtained the highest feature importance. Plot-specific analyses unveiled distinct combinations of geometric and spectral features, although certain features, such as Planarity_MEAN and the mean value of the grid obtained from the standard deviation of the distance between points (Dist_std_MEAN), consistently held high importance across all plots. The relationships between pre-burning UAV data and fire RoS can complement meteorological and topographic variables, enhancing wildfire and prescribed burn models., This research was primarily supported by grants BES-2017-081920 and PID2020-117808RBC21 from MCIN/AEI/10.13039/501100011033 and ESF Investing in your future. Additional support was provided by the US National Science Foundation under Grant No. OIA-2119689 and the Strategic Environmental Research and Development Program (SERDP), grant number RC20-1025.