Skip to main content

POSICIONAMIENTO PARA IOT BASADO EN 5G/6G, GNSS Y LEO PNT DE BAJA ENERGIA

PID2020-118984GB-I00

•
Funding agency name Agencia Estatal de Investigación
Funding agency acronym AEI
Program Programa Estatal de I+D+i Orientado a los Retos de la Sociedad
Call Proyectos de I+D+i (Generación de Conocimiento y Retos Investigación)
Call year 2020
State Plan 2017-2020 Plan Estatal de Investigación Científica y Técnica y de Innovación
Beneficiary centre UNIVERSIDAD AUTONOMA DE BARCELONA

Resultados relacionados

Resultados totales (Incluyendo duplicados): 15
Encontrada(s) 1 página(s)

Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Efficient Detection of Galileo SAS Sequences Using E6-B Aiding †

  • Terris Gallego, Rafael|||0000-0003-2086-508X
  • Fernandez-Hernandez, Ignacio|||0000-0002-9308-1668
  • López-Salcedo, José A.|||0000-0002-5392-6005
  • Seco-Granados, Gonzalo|||0000-0003-2494-6872
Galileo Signal Authentication Service (SAS) is an assisted signal authentication capability under development by Galileo, designed to enhance the robustness of the European Global Navigation Satellite System (GNSS) against malicious attacks like spoofing. It operates by providing information about some fragments of the unknown spreading codes in the E6-C signal. Unlike other approaches, Galileo SAS uniquely employs Timed Efficient Stream Loss-tolerant Authentication (TESLA) keys provided by Open Service Navigation Message Authentication (OSNMA) in the E1-B signal for decryption, avoiding the need for key storage in potentially compromised receivers. The encrypted fragments are made available to the receivers before the broadcast of the E6-C signal, along with their broadcast time. However, if the receiver lacks an accurate time reference, searching for these fragments-which typically last for milliseconds and have periodicities extending to several seconds-can become impractical. In such cases, the probability of detection is severely diminished due to the excessively large search space that results. To mitigate this, initial estimates for the code phase delay and Doppler frequency can be obtained from the E1-B signal. Nevertheless, the alignment between E1-B and E6-C is not perfect, largely due to the intrinsic inter-frequency biases they exhibit. To mitigate this issue, we can leverage auxiliary signals like E6-B, processed by High Accuracy Service (HAS)-compatible receivers. This is a logical choice as E6-B shares the same carrier frequency as E6-C. This could help in obtaining more precise estimates of the location of the encrypted fragments and improving the probability of detection, resulting in enhanced robustness for the SAS authentication process. This paper presents a comparison of uncertainties associated with the use of the E1-B and E6-B signals, based on real data samples obtained with a custom-built Galileo SAS evaluation platform based on Software Defined Radio (SDR) boards. The results show the benefits of including E6-B in SAS processing, with minimal implementation cost.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Performance Analysis of Spoofing and Interference Detection Techniques for Satellite-Based Augmentation System and Global Navigation Satellite System Reference Receivers

  • Alvarez Molina, Xavier|||0009-0007-7807-2572
  • Seco-Granados, Gonzalo|||0000-0003-2494-6872
  • Solé Gaset, Marc
  • Locubiche-Serra, Sergi|||0000-0001-9827-4007
  • López-Salcedo, José A.|||0000-0002-5392-6005
Global Navigation Satellite System (GNSS) reference receivers are an essential part of ground stations that make the operation of Satellite-Based Augmentation Systems (SBAS) possible. Recently, there has been increasing concern about spoofing and interference events, which may seriously hinder the operation of GNSS receivers in liability- and safety-critical applications and, in particular, SBAS ground stations. In this context, the goal of this paper is two-fold. On the one hand, a set of spoofing and interference detection techniques should be presented specifically tailored to operate with the outputs provided by a NovAtel G-III SBAS reference receiver. On the other hand, assessing these techniques with various tests conducted using a Safran Skydel GSG-8 GNSS RF simulator in order to validate their implementation and effectiveness is necessary. This work concludes with an analysis of the obtained results, providing insightful recommendations and guidelines.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Preliminary results of 5G direction of arrival estimation using in-situ calibration with USRP

  • Xhafa, Alda|||0000-0001-8724-3432
  • López-Salcedo, José A.|||0000-0002-5392-6005
  • Seco-Granados, Gonzalo|||0000-0003-2494-6872
The demand for high-precision location information in indoor positioning systems such as logistics, security, emergency etc., has increased the use of 5G systems as an alternative technology solution to the satellite-based positioning technologies. The 5G mobile networks provide more accurate and reliable positioning location in conditions of obstacles and changes. In this paper, the direction of arrival has been used for these localization approach. A description of In-Situ calibration of linear array antennas to enable direction of arrival estimation with 5G signals is provided. Despite the widely employed antenna arrays in 5G to facilitate the measurement of the direction of arrival (DOA), its performance is often degraded by array errors. Therefore, having coherent phases, accurate array manifold response, and delay and frequency offset OFDM waveform correction is a mandatory requirement to perform direction of arrival estimation. We provide an experimental validation of the calibration process and evaluate the DoA estimation performance using measurement data. In addition, we present a comparison among the performance of DoA estimation without calibration, when only the calibration of RF channel error is performed and when the full calibration including the antenna error calibration is done. It is then demonstrated via real test with commercial hardware equipment that an average reduction of 40% for DOA estimation error can be achieved by the proposed In-Situ calibration.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Boundary conditions for snapshot-based spoofing detection using OSNMA unpredictable symbols

  • Shahid, Husnain
  • Egea-Roca, Daniel|||0000-0002-5586-2199
  • Canzian, Luca
  • Sarto, Carlo
  • Pozzobon, Oscar
  • Reyes-González, J.
  • Seco-Granados, Gonzalo|||0000-0003-2494-6872
  • López-Salcedo, José A.|||0000-0002-5392-6005
Anti-spoofing techniques for Global Navigation Satellite System (GNSS) receivers are garnering growing interest as crucial facilitators for the deployment of GNSS-based applications and services. To this end, Galileo is providing the Galileo Open Service Navigation Message Authentication (OSNMA), which conveys a set of cryptographic data with the purpose of authenticating the content of the Galileo I/NAV message. Some of these data are unpredictable to the users, and therefore cannot be known in advance and used to generate a counterfeit signal, thus introducing an additional protection level against potential spoofers. The purpose of this paper is to discuss the boundary conditions that make possible the use of such unpredictable symbols for spoofing detection. The proposed technique is referred to as snapshot OSNMA and it is envisaged as a client-server architecture whereby the user gathers a snapshot of the Galileo E1-B signal, extracts a few unpredictable symbols and sends them to a remote server where their authenticity is analyzed and reported back to the user. The problem is formulated using an equivalent binary symmetric channel (BSC), and results show that spoofing detection is possible provided that certain boundary conditions are fulfilled. The proposed technique thus becomes a valuable candidate for the exploitation of OSNMA in snapshot GNSS receivers where neither continuous processing of the GNSS signal nor OSNMA-enabled capabilities are implemented.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Hybrid GNSS + 5G Position and Rotation Estimation Algorithm Based on TOA and Unit Vector of Arrival in Urban Environment

  • Liu, Qi|||0000-0002-5183-1125
  • Gao, Chengfa|||0000-0002-7827-9844
  • Shang, Rui
  • Gao, Wang|||0000-0002-4856-2454
  • López-Salcedo, José A.|||0000-0002-5392-6005
  • Seco-Granados, Gonzalo|||0000-0003-2494-6872
Positioning methods that rely solely on global satellite navigation system (GNSS) measurements have significantly decreased reliability in urban environments and cannot meet the needs of industries, such as autonomous driving. This article introduces a novel fifth-generation (5G) joint time of arrival (TOA) and unit vector observation model that takes rotation into account, and evaluates its performance through multiple sets of simulated data. The results show that compared with the traditional joint TOA and angle of arrival (AOA) observation model, the proposed model can notably improve the positioning accuracy, and the effect is better after iteration. Furthermore, we conduct a new stochastic model for 5G measurements and investigate the impact of model coefficients on performance. The results reveal that inappropriate coefficients will lead to loss of observational information, highlighting the importance of stochastic models. In urban environments, the proposed 5G joint observation model can effectively assist GNSS and provide more accurate navigation services and rotation estimation, providing valuable insights for the future development of smart transportation.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Evaluation of 5g positioning performance based on utdoa, aoa and base-station selective exclusion

  • Xhafa, Alda
  • Peral-Rosado, José A.
  • López-Salcedo, José A.
  • Seco-Granados, Gonzalo
Accurate and reliable positioning solution is an important requirement for many applications, for instance, emergency services and vehicular-related use cases. Positioning using cellular signals has emerged as a promising solution in Global Navigation Satellite System (GNSS) challenging environments, such as deep urban canyons. However, harsh working conditions of urban scenarios, such as with dense multipath and Non-Line of Sight (NLoS), remain as one of the key factors causing the detriment of the positioning estimation accuracy. This paper demonstrates that the use of joint Uplink Time Difference of Arrival (UTDoA) and Angle of Arrival (AoA) gives a significant improvement in the position accuracy thanks to the use of antenna arrays. The new advances of this technology enable more accurate user locations by exploiting angular domains of propagation channel in combination with time measurements. Moreover, it is shown that a better localization is achieved by combining the joined UTDoA and AoA with a base-station selective exclusion method that is able to detect and eliminate measurements affected by NLoS. The proposed approach has been tested through simulations based on a deep urban deployment map, which comes with an experimental data file of the user’s position. A sounding reference signal of 5G new radio operating in the centimeter-wave band is used. The obtained results add value to the use of advance antennas in 5G positioning. In addition, they contribute towards the fulfillment of high-accuracy positioning requirements in challenging environments when using cellular networks., This work was partially supported by the Spanish Ministry of Science and Innovation project PID2020-118984GB-I00, predoctoral fellowship PRE2018-083748, and by the Catalan ICREA Academia Program.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

A GNSS meta-signal SAGE-based multipath-mitigating loop design

  • Chang, Ning
  • Hong, Xi
  • Wang, Wenjie
  • Seco-Granados, Gonzalo
A major challenge suffered by Global Navigation Satellite System (GNSS) receivers is the multipath interference, which results in serious tracking performance degradation and increased positioning errors. Growing evidence suggests that wide-bandwidth signals and multi-antenna technology are set to become two vital factors to improve the GNSS multipath mitigation, leading to the concept of meta-GNSS signal and multi-dimensional processing. To estimate the time delay of line-of-sight (LOS) ray in a multipath environment, we propose a meta-signal Space Alternating Generalized Expectation (SAGE) based locked loop (SAGELL) design, which exploits the high-resolution of the meta-signal together with the characteristics from spatial and temporal domains. The SAGELL design comprises two main setups: the SAGE-based discriminator and combinational loops. Benefiting from the multi-dimensional processing and meta-signal bandwidth, the SAGE-based discriminator first estimates the LOS ray and the multipath rays in single side-band components and achieves the global estimates of the dual side-band components coherently. Aiming to accurately track each ray of the meta-signal, we further close the SAGELL via angle, code phase, and carrier phase locked loops to filter and predict the estimates. The proposed GNSS meta-signal multipath-mitigating loop design allows for GNSS high-precision discrimination and tracking in multipath scenarios, even in the presence of highly correlated rays, as confirmed by the numerical results., This study is funded in part by the Spanish Ministry of Science and Innovation Projects under Grant PID2020-118984GB-I00, and in part by the Catalan Catalan ICREA Academia Programme under Grant IC-Academia 2019., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Beamforming techniques for resilient navigation with small antenna arrays

  • Pallarés-Rodríguez, Lucía
  • Locubiche-Serra, Sergi
  • Foreman-Campins, Guillem
  • Seco-Granados, Gonzalo
  • López-Salcedo, José A.
This article belongs to the Proceedings of European Navigation Conference ENC 2023., This paper presents a comparative benchmarking of different beamforming techniques for robust multipath and spoofing mitigation in handheld receivers equipped with a small number of antenna elements. In the field of Global Navigation Satellite Systems (GNSSs), multipath and spoofing have become major sources of signal degradation, whereby the presence of closely spaced replicas of the signal of interest hampers the receiver’s performance. Spatial filtering through the use of antenna arrays is one appealing approach to combat these effects. However, the upward trend in device miniaturization poses a serious concern for spatial filtering in handheld devices such as tablets or smartphones, particularly for the case of decimeter-wave signals such as in GNSSs. The terminal size constraints lead to deploying arrays with very few antennas, thus degrading the mitigation performance of the above impairments. This work explores the feasibility of performing robust multipath and spoofing mitigation in GNSS receivers with antenna arrays of very small sizes. Simulation results on four-antenna rectangular and two-antenna linear array distributions are provided, showing that the reduction in array size can be counteracted by the use of advanced beamformers., This work has been supported in part by the Spanish Agency of Research (AEI) under the Research and Development projects PID2020-118984GB-I00/AEI/10.13039/501100011033 and PDC2021-121362-I00/AEI/10.13039/501100011033., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

E1-E6 SDR platform based on bladeRF for testing Galileo-assisted commercial authentication service

  • Terris-Gallego, Rafael
  • Fernández-Hernández, Ignacio
  • López-Salcedo, José A.
  • Seco-Granados, Gonzalo
This article belongs to the Proceedings of European Navigation Conference ENC 2023., To enhance the robustness of the Global Navigation Satellite System (GNSS) against malicious attacks (e.g., spoofing), the European Galileo is working on new services, like Open Service Navigation Message Authentication (OSNMA), which provides authentication on the navigation bits, or Commercial Authentication Service (CAS), which aims to encrypt the spreading code chips. An assisted mode of the latter, named Assisted Commercial Authentication Service (ACAS), is currently under definition by the Galileo program. It uses the Timed Efficient Stream Loss-tolerant Authentication (TESLA) keys provided by OSNMA on the E1-B signal to re-encrypt some fragments of the encrypted E6-C signal, known as Re-Encrypted Code Sequences (RECSs), that are made available in the GNSS Service Centre (GSC). Once downloaded by a compatible receiver, they can be decrypted using the corresponding key and used to perform the correlation with the broadcasted E6-C signal. If that results in a correlation peak, the signal can be authenticated under certain circumstances. However, the probability of detecting this peak depends on the length of these fragments and their periodicity, since they are only provided for certain predefined instants. Indeed, if the receiver relies solely on E6-C signal and has no accurate time reference, this probability is severely degraded. This is why the nominal operating mode proposed for ACAS is to use the estimates provided by E1-B to reduce the uncertainty on the E6-C signal, so that the receiver can know precisely where these fragments are located. In the context of the PAULA project, we have developed a low-cost hardware platform based on bladeRF that allows acquiring both E1-B and E6-C samples synchronously. In this paper, we describe how to set up this platform and we characterise the alignment between the E1-B and E6-C estimates (code phase and Doppler frequency) using the real datasets obtained with such a platform, which is of key importance for the ACAS nominal mode. The results confirm the convenience of using the estimates from the E1-B signal for ACAS, This work was supported, in part, by the European Commission Defence Industry and Space Satellite Navigation (DEFIS) contract DEFIS/2020/OP/0002 and, in part, by the Spanish Agency of Research project PID2020-118984GB-I00 and by the Catalan ICREA Academia Programme. The views expressed herein can in no way be taken to reflect the official opinion of the European Commission., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Boundary conditions for snapshot-based spoofing detection using OSNMA unpredictable symbols

  • Shahid, Husnain
  • Egea-Roca, Daniel
  • Canzian, Luca
  • Sarto, Carlo
  • Pozzobon, Oscar
  • Reyes-González, J.
  • Seco-Granados, Gonzalo
  • López-Salcedo, José A.
Anti-spoofing techniques for Global Navigation Satellite System (GNSS) receivers are garnering growing interest as crucial facilitators for the deployment of GNSS-based applications and services. To this end, Galileo is providing the Galileo Open Service Navigation Message Authentication (OSNMA), which conveys a set of cryptographic data with the purpose of authenticating the content of the Galileo I/NAV message. Some of these data are unpredictable to the users, and therefore cannot be known in advance and used to generate a counterfeit signal, thus introducing an additional protection level against potential spoofers. The purpose of this paper is to discuss the boundary conditions that make possible the use of such unpredictable symbols for spoofing detection. The proposed technique is referred to as snapshot OSNMA and it is envisaged as a client–server architecture whereby the user gathers a snapshot of the Galileo E1-B signal, extracts a few unpredictable symbols and sends them to a remote server where their authenticity is analyzed and reported back to the user. The problem is formulated using an equivalent binary symmetric channel (BSC), and results show that spoofing detection is possible provided that certain boundary conditions are fulfilled. The proposed technique thus becomes a valuable candidate for the exploitation of OSNMA in snapshot GNSS receivers where neither continuous processing of the GNSS signal nor OSNMA-enabled capabilities are implemented., Open Access Funding provided by Universitat Autonoma de Barcelona. This work was supported by the OSNMAplus project funded by the European Union Agency for the Space Programme (EUSPA) under contract GSA/GRANT/03/2019/02, and in part by the Spanish Agency of Research (AEI) under the Research and Development projects with reference number PID2020-118984 GB-I00/ and PDC2021-121362-I00/AEI/https://doi.org/10.13039/501100011033., Peer reviewed
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Evaluation of 5g positioning performance based on utdoa, aoa and base-station selective exclusion

  • Xhafa, Alda|||0000-0001-8724-3432
  • Del Peral-Rosado, Jose Antonio|||0000-0002-5186-4904
  • López-Salcedo, José A.|||0000-0002-5392-6005
  • Seco-Granados, Gonzalo|||0000-0003-2494-6872
Accurate and reliable positioning solution is an important requirement for many applications, for instance, emergency services and vehicular-related use cases. Positioning using cellular signals has emerged as a promising solution in Global Navigation Satellite System (GNSS) challenging environments, such as deep urban canyons. However, harsh working conditions of urban scenarios, such as with dense multipath and Non-Line of Sight (NLoS), remain as one of the key factors causing the detriment of the positioning estimation accuracy. This paper demonstrates that the use of joint Uplink Time Difference of Arrival (UTDoA) and Angle of Arrival (AoA) gives a significant improvement in the position accuracy thanks to the use of antenna arrays. The new advances of this technology enable more accurate user locations by exploiting angular domains of propagation channel in combination with time measurements. Moreover, it is shown that a better localization is achieved by combining the joined UTDoA and AoA with a base-station selective exclusion method that is able to detect and eliminate measurements affected by NLoS. The proposed approach has been tested through simulations based on a deep urban deployment map, which comes with an experimental data file of the user's position. A sounding reference signal of 5G new radio operating in the centimeter-wave band is used. The obtained results add value to the use of advance antennas in 5G positioning. In addition, they contribute towards the fulfillment of high-accuracy positioning requirements in challenging environments when using cellular networks.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Location-Privacy Leakage and Integrated Solutions for 5G Cellular Networks and Beyond

  • Tomasin, Stefano|||0000-0003-3253-6793
  • Centenaro, Marco
  • Seco-Granados, Gonzalo|||0000-0003-2494-6872
  • Roth, Stefan|||0000-0003-4408-3306
  • Sezgin, Aydin
The fifth generation (5G) of cellular networks improves the precision of user localization and provides the means to disclose location information to over-the-top (OTT) service providers. The network data analytics function (NWDAF) can further elaborate this information at an aggregated level using artificial intelligence techniques. These powerful features may lead to the improper use of user location information by mobile network operators (MNOs) and OTT service providers. Moreover, vulnerabilities at various layers may also leak user location information to eavesdroppers. Hence, the privacy of users is likely at risk, as location is part of their sensitive data. In this paper, we first go through the evolution of localization in cellular networks and investigate their effects on location privacy. Then, we propose a location-privacy-preserving integrated solution comprising virtual private mobile networks, an independent authentication and billing authority, and functions to protect wireless signals against location information leakage. Moreover, we advocate the continuous and detailed control of localization services by the user.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

E1-E6 SDR Platform Based on BladeRF for Testing Galileo-Assisted Commercial Authentication Service †

  • Terris Gallego, Rafael|||0000-0003-2086-508X
  • Fernandez-Hernandez, Ignacio|||0000-0002-9308-1668
  • López-Salcedo, José A.|||0000-0002-5392-6005
  • Seco-Granados, Gonzalo|||0000-0003-2494-6872
To enhance the robustness of the Global Navigation Satellite System (GNSS) against malicious attacks (e.g., spoofing), the European Galileo is working on new services, like Open Service Navigation Message Authentication (OSNMA), which provides authentication on the navigation bits, or Commercial Authentication Service (CAS), which aims to encrypt the spreading code chips. An assisted mode of the latter, named Assisted Commercial Authentication Service (ACAS), is currently under definition by the Galileo program. It uses the Timed Efficient Stream Loss-tolerant Authentication (TESLA) keys provided by OSNMA on the E1-B signal to re-encrypt some fragments of the encrypted E6-C signal, known as Re-Encrypted Code Sequences (RECSs), that are made available in the GNSS Service Centre (GSC). Once downloaded by a compatible receiver, they can be decrypted using the corresponding key and used to perform the correlation with the broadcasted E6-C signal. If that results in a correlation peak, the signal can be authenticated under certain circumstances. However, the probability of detecting this peak depends on the length of these fragments and their periodicity, since they are only provided for certain predefined instants. Indeed, if the receiver relies solely on E6-C signal and has no accurate time reference, this probability is severely degraded. This is why the nominal operating mode proposed for ACAS is to use the estimates provided by E1-B to reduce the uncertainty on the E6-C signal, so that the receiver can know precisely where these fragments are located. In the context of the PAULA project, we have developed a low-cost hardware platform based on bladeRF that allows acquiring both E1-B and E6-C samples synchronously. In this paper, we describe how to set up this platform and we characterise the alignment between the E1-B and E6-C estimates (code phase and Doppler frequency) using the real datasets obtained with such a platform, which is of key importance for the ACAS nominal mode. The results confirm the convenience of using the estimates from the E1-B signal for ACAS.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Performance Analysis of the Pilot and Data Component of a CSS Signal for LEO-PNT †

  • Egea-Roca, Daniel|||0000-0002-5586-2199
  • López-Salcedo, José A.|||0000-0002-5392-6005
  • Seco-Granados, Gonzalo|||0000-0003-2494-6872
From the analysis of chirp spread spectrum (CSS) signals in radar and communication applications, we can distinguish the cases of estimating only data or time-delay propagation or Doppler frequency when all the other parameters are known or set to zero. The case of estimating all three parameters at the same time has not been treated in the literature of radar or communications. We consider in this paper the use of a CSS signal for a LEO-PNT signal, which perfectly fits with the case of estimating the three parameters mentioned above. Specifically, the main goal of this paper is to explain the design of a CSS signal for PNT. This will include the design of the ranging component and the data component. The performance evaluation of both components will also be analyzed and linked. It is important to note that the focus of this paper will be the data component, and we link it with the pilot component through sensitivity performance. The results given in this paper show the capabilities of CSS for PNT. Previous works have shown accuracies on the level of meters with achievable data rates shown in this paper in the order of tens of kbps.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Beamforming Techniques for Resilient Navigation with Small Antenna Arrays †

  • Pallarés-Rodríguez, Lucía|||0009-0000-5070-4346
  • Locubiche-Serra, Sergi|||0000-0001-9827-4007
  • Foreman Campins, Guillem|||0000-0002-0150-4484
  • Seco-Granados, Gonzalo|||0000-0003-2494-6872
  • López-Salcedo, José A.|||0000-0002-5392-6005
This paper presents a comparative benchmarking of different beamforming techniques for robust multipath and spoofing mitigation in handheld receivers equipped with a small number of antenna elements. In the field of Global Navigation Satellite Systems (GNSSs), multipath and spoofing have become major sources of signal degradation, whereby the presence of closely spaced replicas of the signal of interest hampers the receiver's performance. Spatial filtering through the use of antenna arrays is one appealing approach to combat these effects. However, the upward trend in device miniaturization poses a serious concern for spatial filtering in handheld devices such as tablets or smartphones, particularly for the case of decimeter-wave signals such as in GNSSs. The terminal size constraints lead to deploying arrays with very few antennas, thus degrading the mitigation performance of the above impairments. This work explores the feasibility of performing robust multipath and spoofing mitigation in GNSS receivers with antenna arrays of very small sizes. Simulation results on four-antenna rectangular and two-antenna linear array distributions are provided, showing that the reduction in array size can be counteracted by the use of advanced beamformers.