Skip to main content

NUEVOS REGISTROS EVAPORITICOS DEL MEDITERRANEO ORIENTAL Y OCCIDENTAL: CONTRIBUCION A LA EVOLUCION DEL ULTIMO GIGANTE SALINO Y OPORTUNIDADES PARA LA TRANSICION ENERGETICA

PID2020-118999GB-I00

•
Funding agency name Agencia Estatal de Investigación
Funding agency acronym AEI
Program Programa Estatal de I+D+i Orientado a los Retos de la Sociedad
Call Proyectos de I+D+i (Generación de Conocimiento y Retos Investigación)
Call year 2020
State Plan 2017-2020 Plan Estatal de Investigación Científica y Técnica y de Innovación
Beneficiary centre UNIVERSIDAD DE BARCELONA

Resultados relacionados

Resultados totales (Incluyendo duplicados): 24
Encontrada(s) 1 página(s)

Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Fracture-related dolostones replacing Upper Jurassic-lowermost Cretaceous syn-rift deposits in the eastern Iberian Chain (eastern Spain)

  • Travé i Herrero, Anna|||0000-0002-2735-3733
  • Salas, Ramon|||0000-0002-9509-5473
  • Cantarero, Irene|||0000-0001-5744-6773
  • Baqués, Vinyet|||0000-0002-7779-4297
  • Cruset, David
  • Gomez-Rivas, Enrique|||0000-0002-1317-6289
  • Martín Martín, Juan Diego|||0000-0002-6530-6196
  • Nadal, Judit
  • Playà, Elisabet|||0000-0002-5298-8300
Upper Jurassic and Lower Cretaceous limestones and dolostones serve as hydrocarbon reservoirs in the offshore area of NE Spain. Since similar dolomitized rocks crop out in the adjacent onshore Maestrat Basin in the SE Iberian Range, understanding the dolomitization and other diagenetic processes is key to assessing reservoir properties. The Maestrat Basin dolostones crop out as elongated, asymmetric bodies, ranging from tens of centimetres to kilometres in length and up to 150m thick, with a wedge-shaped geometry closely associated with fractures. These dolostones are calcium-rich with low concentrations of Mn, Sr, and Na, but variable Fe, indicating that the replacement of the host limestone was followed by dolomite cement precipitation. Fluid inclusion data suggest that dolomitization took place at temperatures ranging between 70 and 120ºC. Such temperatures, together with the high 87Sr/86Sr ratio and fluid salinity (16 to 23% wt. NaCl equivalent), reveal that the dolomitization process took place in burial conditions, from fluids that were infiltrated and likely interacted with Triassic, Liassic, and basement rocks. Although the exact age of dolomitization is not fully constrained, it is thought to coincide with fault-related dolomitization events of the same type previously described in the Maestrat Basin, likely during the latest Early Cretaceous and/or during the Late Cretaceous, in relation to the post-rift basin stage. Geochemical differences between the depocenters and structural highs may reflect the controls of the Maestrat Basin basin architecture on the composition and distribution of fluids., Upper Jurassic and Lower Cretaceous limestones and dolostones serve as hydrocarbon reservoirs in the offshore area of NE Spain. Since similar dolomitized rocks crop out in the adjacent onshore Maestrat Basin in the SE Iberian Range, understanding the dolomitization and other diagenetic processes is key to assessing reservoir properties. The Maestrat Basin dolostones crop out as elongated, asymmetric bodies, ranging from tens of centimetres to kilometres in length and up to 150m thick, with a wedge-shaped geometry closely associated with fractures. These dolostones are calcium-rich with low concentrations of Mn, Sr, and Na, but variable Fe, indicating that the replacement of the host limestone was followed by dolomite cement precipitation. Fluid inclusion data suggestthat dolomitization took place at temperatures ranging between 70 and 120ºC. Such temperatures, together with the high 87Sr/86Sr ratio and fluid salinity (16 to 23% wt. NaCl equivalent), reveal that the dolomitization process took place in burial conditions, from fluids that were infiltrated and likely interacted with Triassic, Liassic, and basement rocks. Although the exact age of dolomitization is not fully constrained, it is thought to coincide with fault-related dolomitization events of the same type previously described in the Maestrat Basin, likely during the latest Early Cretaceous and/or during the Late Cretaceous, in relation to the post-rift basin stage. Geochemical differences between the depocenters and structural highs may reflect the controls of the Maestrat Basin basinarchitecture on the composition and distribution of fluids.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Origin of the Coloured Karst Fills in the Neogene Extensional System of NE Iberia (Spain)

  • Travé, A.
  • Rodríguez-Morillas, Noelia
  • Baqués, Vinyet
  • Playà, E.
  • Casas, Lluís
  • Cantarero, Irene
  • Martín-Martín, J. D.
  • Gómez-Rivas, Enrique
  • Moragas, Mar
  • Cruset, David
Karst fills from the onshore Penedès Basin and offshore València Trough display red, pink, orange and ochre colours. Their Mössbauer spectra indicate that Fe3+ contained in goethite is the dominant species in reddish-pink fills, whereas Fe2+ contained in dolomite and clays is more dominant in the orange and ochre ones. The lower δ13C values and higher 87Sr/86Sr ratios of the karst fills with respect to their host carbonates can reflect the input of soil-derived CO2 and an external radiogenic source into the karst system. This geochemical composition, together with the non-carbonate fraction of the fills, consists of authigenic and transported illite, illite-smectite interlayers, as well as kaolinite, chlorite, pyrite, quartz, ilmenite, magnetite, apatite and feldspar, account for a mixed residual-detrital origin of fills. This polygenic origin agrees with that of the terra rossa sediments described worldwide. The different colours of karst fills are attributed to fluctuations in the water table, which control the Eh/pH conditions in the karst system. Thus, reddish colours reflect low water table levels and oxidising episodes, and orange and ochre ones reflect high water table levels and more reducing episodes. The greenish colours of fills could be related to fluctuations in the Fe3+/Fe2+ ratio, This research was performed within the framework of DGICYT Spanish Projects PGC2018-093903-B-C22 and PID2020-118999GB-I00 funded by the Ministerio de Ciencia, Innovación y Universidades/Agencia Estatal de Investigación/Fondo Europeo de Desarrollo Regional. EGR acknowledges the funding provided by the Spanish Ministry of Science, Innovation and Universities (“Ramón y Cajal” fellowship RYC2018-026335-I). The isotopic, electron microprobe and XRD analyses and the SEM and TEM observations were carried out at “Centres Científics i Tecnològics” of the Universitat de Barcelona. Mössbauer spectroscopy analyses were carried out at Institut de Ciència de Materials de Barcelona. Strontium isotope analyses were carried out at “CAI de Geocronología y Geoquímica Isotópica” of the Universidad Complutense de Madrid., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Origin and distribution of calcite cements in a folded fluvial succession: The Puig-reig anticline (south-eastern Pyrenees)

  • Sun, Xiaolong
  • Gómez-Rivas, Enrique
  • Cruset, David
  • Alcalde, Juan
  • Muñoz-López, D.
  • Cantarero, I.
  • Martín-Martín, J. D.
  • John, Cédric M.
  • Travé, A.
As one of the predominant diagenetic products in clastic rocks, calcite cements are typical fingerprints of cement-forming fluids and are key controls on reservoir quality. The Puig-reig anticline, in the south-eastern Pyrenees (Spain), exposes excellent outcrops of conglomerates, sandstones and claystones, which were deposited from a proximal to medial fluvial system and underwent folding, fracturing and cementation. This anticline constitutes an appropriate case study to investigate the origin and distribution of calcite cements during folding evolution and how they affect reservoir quality. Based on structural, petrographic and geochemical analyses (carbon, oxygen, strontium and clumped isotopes and elemental composition), five generations of calcite cements (Cc0 to Cc4) have been identified, filling intergranular porosity of host rocks, faults and four fracture sets (F1 to F4). Calcite cement Cc0 precipitated in intergranular porosity from meteoric fluids in the phreatic zone during the early diagenetic stage. During the most intense phase of thrusting and folding, Cc1 precipitated in intergranular porosity, faults and F1 to F4 fracture sets from hydrothermal fluids that migrated from deeper areas of the Pyrenean chain. During the late stage of fold growth, Cc2 precipitated in faults and their associated fractures in the anticline crest from hydrothermal fluids but at shallower burial depths than that of Cc1. Calcite cement Cc3 mainly precipitated in fractures with the same strike as F1 and F4 fracture sets in the north-western part of the anticline, from formation fluids that probably migrated through the frontal thrust of the south-eastern Pyrenees. During the continuous fold denudation, Cc4 precipitated from meteoric fluids in F1 to F4 fracture sets across the anticline. Results indicate that at foreland basin margins, external fluids coeval with compressional deformation and/or alteration of detrital carbonates contribute to intensive calcite cementation. This can result in an overall occlusion of porosity and significantly damaged reservoir quality., was provided by the Catalan Council to the Grup Consolidat de Recerca “Geologia Sedimentària” (2017SGR-824) and research projects PGC2018-093903-B-C22 and PID2020-118999GB-I00, funded by the Spanish Ministry of Science and Innovation (MCIN) / State Research Agency of Spain (AEI) /10.13039/501100011033. XS acknowledges funding by the China Scholarship Council for a PhD scholarship (201806450043). EGR acknowledges the Ramón y Cajal fellowship RYC2018-026335-I and JA the Juan de la Cierva-Incorporación fellowship IJC2018-036074-I, both funded by the Spanish Ministry of Science and Innovation (MCIN) / State Research Agency of Spain (AEI) / European Regional Development Fund (ERDF) /10.13039/501100011033., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Stylolites and stylolite networks as primary controls on the geometry and distribution of carbonate diagenetic alterations

  • Gómez-Rivas, Enrique
  • Martín-Martín, Juan Diego
  • Bons, Paul Dirk
  • Koehn, Daniel
  • Griera, Albert
  • Travé, Anna
  • Llorens, Maria-Gema
  • Humphrey, Elliot
  • Neilson, Joyce
There is ongoing debate on whether stylolites act as barriers, conduits, or play no role in fluid transport. This problem can be tackled by examining the spatial and temporal relationships between stylolites and other diagenetic products at multiple scales. Using the well-known Lower Cretaceous Benicàssim case study area (Maestrat Basin, E. Spain), we provide new field and petrographic observations of how bedding-parallel stylolites can influence different diagenetic processes during basin evolution. The results reveal that stylolites can serve as baffles or inhibitors for different carbonate diagenetic reactions, and act as fronts for dolomitization, dolomite recrystallization and dolomite calcitization processes. Anastomosing stylolites that pre-date burial dolomitization probably acted as a collective baffle for dolomitization fluids in the study area, resulting in stratabound replacement geometries at the metre-to-kilometre scale. The dolomitization front coincides with stylolites, and can be traced along consecutive anastomosing ones. Such anastomosing stylolites are typical of mud-dominated facies that characterize limestone-dolostone transition zones. Conversely, dolostone bodies tend to correspond to more grain-dominated facies characterized by parallel (non-anastomosing) stylolites. Stylolites subsequently acted as fluid flow conduits and barriers when the burial and stress conditions changed. Stylolitic porosity enhanced by dissolution within dolostones close to faults appears filled with saddle dolomite riming the stylolite pore, and high-temperature blocky calcite cements filling the remaining porosity. The fluids responsible for these reactions were likely released from below at high pressure, causing hydraulic brecciation, and were channelised through stylolites, which acted as fluid conduits. Stylolites are also found acting as baffles for subsequent dolomite calcitization reactions during meteoric diagenesis and occasionally appear filled with iron oxides likely released by calcitization. This example demonstrates how the same type of stylolites (bedding-parallel) can act as barriers/inhibitors and/or conduits for different types of diagenetic reactions through time, and how important it is to consider their collective role when they form networks., This research was carried out within the framework of the Spanish Ministry of Science and Innovation Projects PGC2018-093903-B-C22 and PID2020-118999GB-I00, the Grup Consolidat de Recerca “Geologia Sedimentària” (2017-SGR- 824, funded by the Agency for Management of University and Research Grants, Catalan government, Spain) and the DGMK (German Society for Petroleum and Coal Science and Technology) project 718, funded by the companies ExxonMobil Production Deutschland GmbH, GDF SUEZ E&P Deutschland GmbH, RWE Dea AG, and Wintershall Holding GmbH. EGR acknowledges funding by the Spanish Ministry of Science, Innovation and Universities (“Ramón y Cajal” fellowship RYC2018-026335-I), and the Geological Society of London Elspeth Matthews Fund 2015 grant. MGL acknowledges funding by the Spanish Ministry of Science, Innovation and Universities (“Juan de la Cierva-Incorporación” fellowship IJC2018-036826-I)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Advances in the modeling of the Iberian thermal lithosphere and perspectives on deep geothermal studies

  • Torné, Montserrat
  • Jimenez-Munt, Ivone
  • Negredo, Ana M.
  • Fullea, J.
  • Vergés Masip, Jaume
  • Marzán, Ignacio
  • Alcalde, Juan
  • Gómez-Rivas, Enrique
  • García de la Noceda, C.
Renewable energy sources are key to achieve the transition toward clean energy system. Among them, the geothermal energy has a production whose effectiveness requires sufficient understanding of the temperature distribution and fluid circulation at depth, as well as of the lithological and petrophysical properties of the crust. The focus of this paper is twofold: first, we summarize the main advances in the development of new methodologies and numerical codes to characterize the properties of the thermal lithosphere in terms of its, temperature, density and composition; second, based on the compilation of available thermal modelling results, we present the depth of the thermal Lithosphere–Asthenosphere Boundary (LAB) of the Iberian Peninsula and the temperature distribution at crustal depths of 5, 10, and 20 km, in addition to at Moho level. At 5 km depth, the temperature is above 110 °C with local anomalies (> 130 °C) located in the Iberian Massif and Cenozoic volcanic provinces. A similar pattern is observed at 10 and 20 km depth, where temperatures are above 190 °C and 350 °C, respectively. At 20 km depth, anomalies above > 500 °C, delineate the SE and NE Cenozoic volcanic provinces. At Moho depths, temperature ranges from 450 to 800 °C with hot regions mainly located along the Iberian Massif and the SE and NE volcanic provinces. The compiled results do not show any lithospheric anomaly that could give rise to high temperatures at shallow depths, but they do show an acceptable exploitation potential at intermediate depths. With regard to the direct use of district and greenhouse heating and for industrial processes, the potential is great throughout the Peninsula, the main challenges being the availability of groundwater and drilling costs., This work has been supported by EVAMED (PID2020-118999GB-I00) and GEOCAM (PGC2018-095154-B-100) funded by the Spanish Ministry of Science and Innovation/State Research Agency of Spain (AEI)/https://doi.org/10.13039/501100011033.e). JA is funded by Grant IJC2018-036074-I and EGR by the Ramón y Cajal Fellowship RYC2018-026335-I, both funded by the Spanish Ministry of Science and Innovation (MCIN)/State Research Agency of Spain (AEI). Additional funding comes from the European Regional Development Fund (ERDF)/https://doi.org/10.13039/501100011033.e., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Effects of fluvial sedimentary heterogeneity on CO2 geological storage: Integrating storage capacity, injectivity, distribution and CO2 phases

  • Sun, X.
  • Cao, Y.
  • Liu, K.
  • Alcalde, Juan
  • Cabello, P.
  • Traveset, Anna
  • Cruset, David
  • Gómez-Rivas, Enrique
Fluvial system deposits often form suitable reservoirs for CO geological storage (CGS). These potential storage sites usually present heterogeneous fluvial architectures at multiple scales. This heterogeneity can exert varied effects on different aspects of CGS, resulting in significant storage efficiency variability. Here, we investigate the effects of variable fluvial lithofacies associations on CO storage, using the Puig-reig anticline in the SE Pyrenees (Spain) as a reservoir analog. To test this, we employ a multidisciplinary approach that integrates field sedimentology, reservoir modeling, and numerical simulation of CO injection to produce models akin to different fluvial lithofacies associations. The storage volume and injectivity of CO are found to decrease in reservoirs with decreasing fractions and sizes of high-permeable facies from the proximal to the medial-distal lithofacies associations. The flow barriers created by low-permeable facies can hinder the vertical migration of the CO plume and prevent it from reaching the reservoir top, hence reducing the direct contact between the CO plume and the overlying caprock. Furthermore, an optimal amount of low-permeable layers (around 30% in this study) can increase the swept area of CO and reduce the proportions of free CO phase. These aspects can collectively increase the amount of permanently trapped CO and reduce the leakage risks of the injected CO. Based on the characteristics of the resulting models (i.e., storage volume, injectivity, distribution and phases of CO), a multi-criteria decision-making method has been used to quantitatively rank the different lithofacies associations according to their suitability for CO storage. In this analysis, the proximal-medial fluvial lithofacies associations are assessed to be the most suitable ones because they feature low proportions of the injected CO reaching the reservoir top and in free phase while maintaining the high storage volume and injectivity. This study reveals that heterogeneous reservoir architectures have mixed effects on CO storage, and that reservoirs featuring moderately heterogeneous architectures (i.e., fractions of low-permeable facies ranging from 30% to 40%) are beneficial to keeping the balance among different aspects of CO storage. This provides new insights for the screening and selection of potential geological sites for CO storage., Funding was provided by the China University of Petroleum (East China) to the Independent Innovation Research Project 22CX06004A and by the Catalan Council to the Grup Consolidat de Recerca “Geologia Sedimentària” (2017SGR-824) and the DGICYT Spanish Projects PGC2018-093903-B-C22, PID2020-118999GB-I00 and PID2021-122467NB-C22 (MCIN/AEI/10.13039/501100011033/FEDER, Unión Europea). JA acknowledges funding from MICINN (Juan de la Cierva fellowship - IJC2018-036074-I)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Full-Field Numerical Simulation of Halite Dynamic Recrystallization From Subgrain Rotation to Grain Boundary Migration

  • Hao, B.
  • Llorens, Maria-Gema
  • Griera, Albert
  • Bons, Paul Dirk
  • Lebensohn, Ricardo A.
  • Yu, Y.
  • Gómez-Rivas, Enrique
Full-field numerical modeling is a useful method to gain understanding of rock salt deformation at multiple scales, but it is quite challenging due to the anisotropic and complex plastic behavior of halite, together with dynamic recrystallization processes. This contribution presents novel results of full-field numerical simulations of coupled dislocation glide and dynamic recrystallization of halite polycrystalline aggregates during simple shear deformation, including both subgrain rotation and grain boundary migration (GBM) recrystallization. The results demonstrate that the numerical approach successfully replicates the evolution of pure halite microstructures from laboratory torsion deformation experiments at 100–300°C. Temperature determines the competition between (a) grain size reduction controlled by dislocation glide and subgrain rotation recrystallization (at low temperature) and (b) grain growth associated with GBM (at higher temperature), while the resulting crystallographic preferred orientations are similar for all cases. The relationship between subgrain misorientation and strain follows a power law relationship with a universal exponent of 2/3 at low strain. However, dynamic recrystallization causes a progressive deviation from this relationship when strain increases, as revealed by the skewness of the subgrain misorientation distribution. A systematic investigation of the subgrain misorientation evolution shows that strain or temperature prediction from microstructures requires careful calibration., This study has been funded by DGICYT Spanish Projects PID-2020-118999GB-I00 (Ministerio de Ciencia e Innovación/Agencia Estatal de Investigación/10.13039/501100011033) and PID-2021-122467NB-C21 (Ministerio de Ciencia e Innovación/Agencia Estatal de Investigación/10.13039/501100011033/FEDER), and 2021 SGR 00349 “Geologia Sedimentària” and 2021 SGR 00410 “Modelització Geodinàmica de la Litosfera” (Agència de Gestió d’Ajuts Universitaris i de Recerca). MG-L acknowledges the “Consolidación Investigadora” Grant CNS2022-135819 funded by Ministerio de Ciencia e Innovación/Agencia Estatal de Investigación/10.13039/501100011033 and EU NextGenerationEU/PRTR. Baoqin Hao acknowledges funding by the China Scholarship Council for a PhD scholarship (CSC-202006930010). EG-R acknowledges the “Ramón y Cajal” Fellowship RyC-2018-026335-I, funded by the Ministerio de Ciencia e Innovación/Agencia Estatal de Investigación/10.13039/501100011033. We are grateful to Marina Armann for communication regarding her PhD thesis, and to Till Sachau for helping to create ELLE software containers., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

“In-plane” site-specific FIB lamella extraction from deformed magnetite and the investigation of low angle grain boundaries under TEM

  • Mamtani, M. A.
  • Wenzel, O.
  • Kontny, A.
  • Hilgers, C.
  • Müller, E.
  • Renjith, A. R.
  • Llorens, Maria-Gema
  • Gómez-Rivas, Enrique
In this study a modus operandi to investigate site-specific nanostructures in thin films (lamellae) excavated “in-plane” across (sub)grain boundaries is presented. This is done by discussing the case of a magnetite grain hosted in a thin section of banded iron formation (Norway) that is prepared parallel to the kinematic reference frame (XZ section of the strain ellipsoid). SEM-EBSD analysis reveal that the magnetite grains do not develop a strong crystallographic preferred orientation, although individual grains are strained and show evidence of intracrystalline deformation in form of low angle grain boundaries (LAGB's). Two “in-plane” lamellae using focused ion beam (FIB) technique are excavated from a magnetite grain in the kinematic reference frame, and nanostructures are studied along three LAGB's using high resolution transmission electron microscopy imaging followed by Fourier transformation (FT), inverse FT and estimation of dislocation densities. Our data establish an empirical relationship for the studied LAGBs, namely, the smaller the angle between LAGB and X-direction, the larger are the shear strain and dislocation density. This relationship is validated from numerical simulations of viscoplastic deformation and dynamic recrystallisation of polycrystalline aggregates of halite, which is also a cubic mineral analogous to magnetite. In addition to the site-specific “in-plane” FIB lamella information, this study also shows that in a deformed mineral the different orientations of the LAGB compared to the principal strain axes show a different dislocation density. This approach of full tracking of the extension direction (X) from the macroscopic to the nano-scale could play an important role in forward modelling of microstructure evolution in future studies., This study is an outcome of a collaborative research project funded by the Alexander von Humboldt Foundation (Germany) under its Research Group Linkage Program awarded to MAM, AK and CH. Amarnath Dandapat (Department of Geology and Geophysics, IIT Kharagpur, India) is thanked for preparing well-polished samples for EBSD analysis. Thanks to B. Priesemann (Helgeland Museum, Norway) for kindly providing the magnetite ore sample. Thanks are due to Niloy Bhowmik for helping with SEM-EBSD analysis at the Central Research Facility (IIT Kharagpur, India). We are grateful to Heike Störmer for helping with TEM analysis at the Laboratory for Electron Microscopy, Karlsruhe Institute of Technology (Karlsruhe, Germany). EGR acknowledges the Ramón y Cajal fellowship ( RYC 2018-026335-I ), funded by the Spanish Ministry of Science and Innovation (MCIN)/State Research Agency of Spain (AEI)/European Social Fund ( 10.13039/501100011033 ), and the research project PID 2020-118999 GB-I00, also funded by the MCIN/AEI/10.13039/501100011033., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

New 40Ar/39Ar radiometric ages of lamproites indicate latest Tortonian marine restriction of the Fortuna Basin, Eastern Betics, southern Spain

  • Gibert, Luis
  • Deino, Alan
  • Carrazana, A.
  • Cruset, David
  • Playà, E.
  • Ibáñez Insa, Jordi
  • Gimeno, Domingo
  • García-Veigas, J.
  • Leria, Maria
  • Pineda, Victoriano
Exposures of lamproitic volcanic rocks have been used to constrain the age of the evaporitic basin-fill in the Fortuna Basin of southern Spain. K/Ar dates initially suggested a Messinian age assignment for these deposits; however, subsequent 40Ar/39Ar dates indicated a Tortonian age, implying the early onset of evaporite formation in the eastern Betic Cordillera, in an event termed the ¿Tortonian Salinity Crisis¿. In this paper, we critically review the published chronology of the key igneous outcrops and provide new 40Ar/39Ar ages, which show that the Cabezos Negros lamproites lie close to the Tortonian-Messinian boundary (c. 7.25 ¿Ma). We also provide new paleomagnetic measurements from each of the three lamproitic outcrops (Cabezos Negros, Derramadores, and El Tale), which demonstrate normal magnetic polarity coincident with episodes of volcanic and subvolcanic activity. The presence of peperites and pillow structures indicate that volcanism at Cabezos Negros was coeval with deposition of the lower part of Rambla Salada Gypsum Member. Therefore, the normal polarity identified in this unit should be equivalent to the normal polarity on the Cabezos Negros lamproites. These results indicate that the initial marine restriction and evaporitic deposition of Fortuna Basin occurred more than a million years before the Messinian Salinity Crisis., Funding was provided by grants CGL-2016-79458, PID2020-118999 GB-I00 [Spanish Ministry of Science and Innovation (MCIN)-State Research agency of Spain (AEI)/10.13039/501100011033 and Juan de la Cierva fellowship FJC2020-043488-I from the European Union Next Generation EU/PRTR ], and the Catalonian Government Action 2021-SGR-349., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

IESDB ¿ the Iberian Evaporite Structure Database

  • González-Esvertit, Eloi
  • Alcalde, Juan
  • Gómez-Rivas, Enrique
Evaporites flow in the solid state under relatively low differential stress and have unique mechanical properties compared to other sedimentary rocks. Worldwide, they control the structural and stratigraphical architecture of many basins and orogens in ancient and active tectonic settings. Moreover, they host mineral deposits and play a key role in petroleum systems because they typically act as seals due to their low permeability, and their ability to flow results in the formation of structural hydrocarbon traps such as folds and faults in their encasing rocks. Additionally, evaporite structures can be used as subsurface storage sites for geo-energy applications and nuclear waste. The systematic characterisation of subsurface evaporite structures is thus key for the development of geoscience-based technologies to address societal challenges. Owing to their value, massive amounts of surface and subsurface information about (among others) the stratigraphy, structure, geochemistry, and petrophysical properties of evaporite structures and their surrounding rocks have been acquired by Earth scientists, petroleum and mining exploration companies, and geological surveys. However, the data often appear segregated (i.e. in the form of database fragments, scientific articles, and unpublished reports), are not systematically organised, and are sometimes not fully accessible. This contribution presents the Iberian Evaporite Structure Database (IESDB), the first comprehensive assessment that focuses on evaporite structures carried out in any region of the world. The IESDB includes information and figures for 150 evaporite structures and their surrounding rocks inventoried in Spain and Portugal and is sourced from other six thematic databases and more than 1500 published and unpublished scientific documents. The database targets undeformed to slightly deformed evaporite successions, outcropping and buried diapirs, evaporite-cored anticlines, evaporite-detached thrusts, and allochthonous evaporite bodies. Collated data include information about the structure, stratigraphy, event chronology, surface and subsurface data availability, mining activity, and key bibliographic references. The IESDB follows the FAIR principles of database management (Findable, Accessible, Interoperable, and Reusable) and is presented as an interactive web page and an open-access database, where indexed structures can easily be selected from a map or browser and filtered by a search engine. The IESDB intends to be a useful resource for teaching (i.e. pointing out examples of exceptional evaporite outcrops), academic and industry research (i.e. identifying knowledge deficits on specific structures or tectonic settings), and for the sustainable exploration and appraisal of mineral resources and geo-energy applications (i.e. representing a terminus a quo for site selection and suitability assessment). The framework provided by the IESDB is an opportunity to enhance the scientific research on Iberian evaporite structures in Spain and Portugal and to take advantage of their scientific and economic potential to tackle important societal challenges faced by these countries. The IESDB is freely available at https://iesdb.eu (last access: 15 June 2023) and the datasets can be downloaded from https://doi.org/10.20350/digitalCSIC/14586 (González-Esvertit et al., 2022)., This research has been funded by the Ramón y Cajal fellowship RyC-2018-026335-I to Enrique Gomez-Rivas (MCIN/AEI/10.13039/501100011033 and the European Social Fund – Investing in Your Future) and the DGICYT Spanish Project PID2020-118999GB-I00 (MCIN/AEI/10.13039/501100011033). This work is a contribution to the 2021 SGR 00349 Geologia Sedimentària consolidated research group (Agència de Gestió d’Ajuts Universitaris i de Recerca). Juan Alcalde has been funded by MCIN/AEI/10.13039/501100011033 and the European Union NextGenerationEU/PRTR for the Ramón y Cajal fellowship (grant no. RYC2021-033872-I), Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Isotope composition (δ34S, δ18O) of the Middle Triassic-Early Jurassic sulfates in eastern Iberia

  • Ortí, F.
  • Pérez-López, Alberto
  • Pérez-Valera, Fernando
  • Benedicto, Constantino
This study combines published isotope data (223 samples) with new data (153 samples) on the δS and δO composition of Ca-sulfate rocks (anhydrite and secondary gypsum) accumulated in eastern Iberia during the Middle Triassic to Early Jurassic. The δS mean values of the evaporite units reveal the following trends: a decrease from the lower Anisian (~18‰) to the Carnian-Norian interval (~15‰); an increase at the Rhaetian (~16‰); a decrease in the Hettangian-Sinemurian interval (~14‰); and finally an increasing trend from the Sinemurian-Pliensbachian (~16‰) to the Pliensbachian-Toarcian (~19‰). This δS isotope assemblage together with the generalized low standard deviations observed for the different evaporite units is consistent, and suggests that the isotope composition of these Ca-sulfates are primary signatures related to feeding marine water sulfate. Depending on the evaporite units, these δS mean values are, nevertheless, ~1‰ to ~3‰ lower than those reported for coeval Triassic evaporites of the Germanic basin and the Alp-Apennine domains. In eastern Iberia, the δO values are more variable and also display wider scatters than the corresponding δS values. Of particular interest in our study are: (i) the low δS values for the Anisian in comparison with those in the Germanic basin; (ii) the shift to heavier values in the Rhaetian, recorded for first time in the evaporites of eastern Iberia; (iii) the low values observed for the Hettangian, which suggest that the change to the heavier values of the Jurassic (~19‰) occurred after the end-Hettangian in eastern Iberia; and (iv) the affinity of the δS values recorded for the Hettangian-Sinemurian interval to those known for the Canadian domain., This study was supported by the following research projects: 2017SGR-824 (SEDIMENTARY GEOLOGY), Departament d'Innovació, Universitats i Empreses of the Catalan Government; CGL2016-79458-P (Ministerio de Economía y Competitividad), PGC2018-098272-B-I00, PID2019-104625RB-I00 and PID2020-118999GB-I00 (Secretaría Estado I+D+I; Ministerio de Ciencia e Innovación) of the Spanish Government; and B-RNM-072-UGR18 (FEDER Andalucía), P18-RT-4074, and RNM-208 (Junta de Andalucía).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Chlorite chemical refinement during giant quartz vein formation

  • González-Esvertit, Eloi
  • Canals, Ángels
  • Bons, Paul Dirk
  • Nieto, Fernando
  • Gomez-Rivas, Enrique
The major elemental composition of chlorite is widely used for petrogenetic investigations on low-temperature geological processes. However, compositional variations of chlorite within a given tectonic environment are common and, when overlooked, can lead to erroneous petrological interpretations. We thoroughly investigate chlorites occurring within giant quartz veins (GQVs) in the basement rocks of the Pyrenees. These structures have widths of up to tens of meters and lengths of kilometers and form in both mid-crustal ductile and upper-crustal seismogenic domains. Texturally constrained chlorite analyses and spatially resolved whole-rock elemental analyses reveal a progressive chemical evolution of chlorite coupled to GQV formation. Six chlorite generations that were distinguished according to their texture show consistent chemical variations at the microscale. Host rock– and quartz vein–related chlorites are the textural and compositional endmembers. Between them, a progressive chemical refinement occurred in transitional chlorite compositions linked to host rock, vein quartz, and pressure-solution microstructures, in accordance with significant fluid-rock interactions leading to GQV formation. This rock alteration process is further confirmed at the macroscale by the progressive depletion of all major and trace elements but silica, with decreasing distance toward GQVs. We demonstrate that (1) inferring the temperature conditions of chlorite crystallization is not as straightforward as generally assumed and that (2) GQVs can be formed under rock-buffered conditions, at lower temperatures than previously thought. These results have implications for the practice commonly used in chlorite-based geothermometry, as well as for the modes of fluid, heat, and mass transport within Earth’s crust., This work was funded by Dirección General de Investigación Científica y Técnica projects PID2021-122467NB-C22 and PID2021-125585NB-I00 (MCIU/AEI/FEDER-UE/10.13039/501100011033) and PID2020-118999GBI00 (MCIN/AEI/10.13039/501100011033), and by the Sedimentary Geology Research Group (2021 SGR 00349). E. González-Esvertit was funded by the Geological Society of London, Ph.D. grant 2022 FI_B1 00043 (Generalitat de Catalunya; European Social Fund), and the \u201CConsolidaci\u00F3n Investigadora\u201D grant CNS2022-135819 funded by MCIN/AEI/10.13039/50110001103. E. Gomez-Rivas was funded by the MCIU/AEI/ESF/10.13039/501100011033 \u201CRamón y Cajal\u201D fellowship (RYC2018-026335-I).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Dynamic Recrystallization of Olivine During Simple Shear: Evolution of Microstructure and Crystallographic Preferred Orientation From Full-Field Numerical Simulations

  • Yu, Y.
  • Griera, Albert
  • Gómez-Rivas, Enrique
  • Bons, Paul Dirk
  • García-Castellanos, Daniel
  • Hao, B.
  • Lebensohn, Ricardo A.
  • Llorens, Maria-Gema
Upper mantle deformation is mainly controlled by the mechanical behavior of olivine. Crystallographic preferred orientations (CPOs) develop in olivine due to crystal-plastic deformation during mantle flow, where the a-axes of olivine polycrystalline aggregates are aligned with the flow direction. Therefore, the observed CPO in olivine-rich rocks is used as an indicator of the mantle flow direction. Experimental data show that olivine rheology is strongly controlled by the microstructure. While the influence of plastic deformation is in general well characterized, the role of dynamic recrystallization during deformation is not totally understood, limiting our ability to interpret the deformation history of naturally deformed rocks. This contribution presents microdynamic numerical simulations of olivine polycrystalline aggregates with different iron content (i.e., fayalite content) with the aim of exploring the CPO and grain size response to dynamic recrystallization. We use a full-field approach with an explicit simulation of viscoplastic deformation and dynamic recrystallization processes under simple shear boundary conditions up to high strain. The simulations show that the CPOs are similar and practically reach the same maximum regardless of the iron content. CPOs are characterized by a single cluster of a-axis and two-clusters of b-axis, reveling a joint activity of the easy glide [100](010) and the moderate strength [100](010) slip systems. High-strain domains of our models are consistent with experimental results, showing an A-type fabric with double maxima, and where the CPO is aligned with the shear direction. The model provides a deeper understanding of the dynamic recrystallization influence on olivine CPOs resulting from plastic deformation., Ministerio de Ciencia e Innovación. Grant Numbers: PID-2021-122467NB-C21, PID2022-139943NB-I00, PID2020-118999GB-I00, CNS2022-135819, CNS2023-145382; China Scholarship Council. Grant Number: CSC-202008130104
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

A review of experimental investigations on salt precipitation during CO2 geological storage

  • Sun, Xiaolong
  • Liu, Keyu
  • An, Senyou
  • Hellevang, Helge
  • Cao, Yingchang
  • Alcalde, Juan
  • Travé, Anna
  • Yuan, G.
  • Deng, Chenguang
  • Gómez Rivas, Enrique
Salt precipitation due to formation drying is a critical secondary alteration process that significantly impairs reservoir injectivity in the context of CO2 geological storage. In this work, salt precipitation during CO2 injection is reviewed primarily through various experimental studies. First, the experimental systems for salt precipitation studies, namely core-flooding, microfluidic-chip, static batch, and surface drying experimental systems, have been described to present their respective experimental procedures and merits, as well as corresponding applications. Subsequently, following the general description of the formation mechanisms of salt precipitation, the macro and micro salt distribution patterns at the reservoir and pore scales have been summarized. Finally, and most importantly, this study provides a comprehensive analysis of the controlling factors for salt precipitation, categorized into four different groups, according to the brine, rock, gas, and injection scenario aspects. Among all these factors, brine salinity, CO2 injection rate and initial reservoir properties are considered the most critical in determining the amount and distribution of precipitated salts and the degree of injectivity impairment. The effects of multi-scale reservoir heterogeneity and rock wettability on salt precipitation are attracting growing consideration, while the brine and gas composition studies are receiving less attention due to their relatively minor influences on reservoir alteration. Due to the limited specimen sizes, the ex-situ brine replenishment may be underestimated in core-flooding and microfluidic-chip experiments. This may result in a potentially significant underestimation of the volume of local salts and the potentially inaccurate prediction of the drying process during CO2 injection in many such experiments., Funding was provided by China University of Petroleum (East China) to the Independent Innovation Research Project 22CX06004A, by the Qingdao Municipal Bureau of Science and Technology to the Natural Science Project 23-2-1-55-zyyd-jch, by the Department of Science & Technology of Shandong Province to the Natural Science Project ZR2023QD093, and by the National Natural Science Foundation of China to the Natural Science Project 42402140. SA acknowledges the Open Research Project SKLDOG2024-KFYB-02 funded by the State Key Laboratory of Deep Oil and Gas and the Research Team Cultivation Program 2023QNT004 funded by Shenzhen University. HH acknowledges funding from Norway Grants (UMO2019/34/H/ST10/00564) and EEA and Norway Grants (NOR/POLNORCCS/AGaStor/0008/2019-00). JA acknowledges funding from MICIU/AEI/10.13039/501100011033 and “ERDF/EU” (PID2022-140850OB-C22). AT acknowledges Grant PID2021-12246NB-C22 funded by MICIU/AEI/10.13039/501100011033, FEDER, EU, and the Catalan Council to the Grup Consolidat de Recerca Reconegut Geologia Sedimentària (2021 SGR-Cat 00349). EGR acknowledges funding from the DGICYT Spanish Project PID-2020-118999GB-I00 funded by MCIN/AEI/10.13039/501100011033) and the “Consolidación Investigadora” Grant CNS2023-145382 funded by MCIN/AEI/10.13039/50110001103 and European Union NextGeneration EU/PRTR., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Characterization of the Miocene Castellón Sandstones Formation in the Western Mediterranean as a potential geological carbon storage site

  • Gil-Ortiz, M.
  • Gómez-Rivas, Enrique
  • Alcalde, Juan
  • Cabello, Patricia
  • Yeste, L. M.
  • Zamora, G.
  • Carrasco, Ángel
  • García Fernández-Valderrama, David
  • Martín-Monge, Antonio
  • Mañas, Marta
  • Olgado Azpiazu, María Victoria
  • Ron Martín, Manuel
  • Lukito, Pujianto
  • Pángaro, Francisco
In response to the growing interest in decarbonizing Europe's industrial hubs, this study examines the potential of the Miocene Castellón Sandstones Formation in the Valencia Trough for geological carbon storage. The proposed storage unit is represented by a siliciclastic succession formed mainly by sandstones and sandy heterolithics, in the Ebro Delta offshore area of the Valencia Trough. The sedimentological characterization of this succession, based on the study of a cored section from Amposta Marino C-2 well, has allowed to identify up to eleven lithofacies, comprising sandstones, heterolithics, calcarenites and carbonate breccias. These lithofacies can be grouped in six facies associations, including: 1) fluvial channel, 2) delta front proximal mouth bar, 3) delta front distal mouth bar, 4) proximal prodelta, 5) distal prodelta and 6) shelfal lag. The seismic stratigraphic analysis carried out throughout the study area points out to the additional presence of delta plain deposits in the northeastern sector of the study area, approximately at 30 km from the present-day Ebro delta shoreline. Based on the interpretation of these facies and seismic facies associations, the proposed depositional model consists of a river dominated, wave-influenced delta for the proto-Ebro deltaic system during the Late Miocene in the Valencia Trough. This study proposes that this sand-prone succession is presented as a good candidate for geological carbon storage in the study area, considering its proximity to the onshore Tarragona's industrial complex and its optimal reservoir characteristics. Additionally, the thick succession of the Ebro Shales also shows great potential as a vertical and lateral seal of the underlying Castellón Sandstones Formation., We acknowledge support from grant PID2020-118999 GB-I00 funded by MCIN/AEI/10.13039/501100011033, grants PID2022-140850OB-C21 and PID2022-140850OB-C22 funded by MICIU/AEI/10.13039/501100011033 and by “ERDF/EU”, the “Consolidación Investigadora” grants CNS2023-145382 (to Enrique Gomez-Rivas) funded by MCIN/AEI/10.13039/50110001103 and European Union NextGenerationEU/PRTR, and projects 2021 SGR 00349 “Geologia Sedimentària” and 2021 SGR 00076 “Geodinàmica i Anàlisi de Conques” funded by AGAUR are gratefully acknowledged., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Granitoid Metasomatism and Giant Quartz Vein Formation by Mineral Replacement: Insights from the Canigó Massif, Eastern Pyrenees

  • González-Esvertit, Eloi
  • Canals, Ángels
  • Prieto-Torrell, Claudia
  • Bons, Paul Dirk
  • Llorens, Maria-Gema
  • Casas, Josep Maria
  • Aguilar, Carmen
  • Neilson, Joyce
  • Elburg, Marlina A.
  • Gómez-Rivas, Enrique
Metasomatism is a ubiquitous process in the Earth’s crust, exerting major controls on fluid, heat and mass transfer and rock deformation, and is commonly constituted by mineral replacement reactions. Different types of metasomatism may coexist and/or successively conceal each other in a given area. Deciphering the geochemical behaviour, regional extent and mineralogical changes of multi-stage metasomatism can be difficult because of the overprinting of successive events and their frequent relationship with deformation. Here, we investigate granitoid metasomatism, namely silicification, feldspathisation and sericitisation, in the Variscan basement rocks of the Canigó Massif (Eastern Pyrenees, SW Europe), which is spatially related to Giant Quartz Veins (GQVs) tens of metres wide and several kilometres long. Unaltered and altered granitic orthogneisses derived from Ordovician intrusives and late-Variscan granitoids, as well as GQV occurrences, are studied across scales through structural and textural characterisation, whole-rock geochemistry and Electron Backscatter Diffraction (EBSD). Geochemical analyses are further compared with a new database including more than 600 unaltered granite and orthogneiss samples from the Pyrenees and the Catalan Coastal Ranges (SW European Variscan Belt). Results show that silicification, the dominant metasomatic process, was related to regional-scale shear zones and contributed to form GQVs through mineral replacement. This is confirmed at the macro- (km), meso- (m–cm) and micro-scale (μm) by relict fabrics, mineral phases and structural features of the precursor rocks within veins, by a progressive depletion of all major and trace elements, except silica, in rocks sampled along decreasing distances from GQV outcrops, and by the localisation of mylonitic deformation along GQVs. Feldspathisation and sericitisation are, in contrast, restricted to specific sectors and exposed as albitite, trondhjemite and pale green mica-rich outcrops. It is suggested that most of the exposed areas of the studied GQVs are, accordingly, not veins sensu stricto but metasomatic products where the original fabrics and features of precursor rocks were overprinted during coupled deformation and Si-metasomatism. Results presented here have major implications for the scale and geochemical behaviour of multi-metasomatic events, as well as on the kinetics of mineral replacement processes leading to changes in the physicochemical properties of crustal rocks., This research was funded by the DGICYT Projects PID2021-122467NB-C22, PID2021-125585NB-I00 and PID2022-139943NB-I00 (MCIN/AEI/FEDER-UE/10.13039/501100011033), PID2020-118999GB-I00 (MCIN/AEI/10.13039/501100011033), the ‘Modelització Geodinàmica de la Litosfera’ (Generalitat de Catalunya, 2021 SGR 00410), ‘Sedimentary Geology’ (Generalitat de Catalunya, 2021 SGR 00349) and ‘GEOXiS’ (Generalitat de Catalunya, 2021 SGR 00262) Consolidated Research Groups and the VolcPeG Research Group. EGE acknowledges the funding provided by the Geological Society of London (GSL) Student Research Grants, the PhD grants funded by Generalitat de Catalunya and the European Social Fund (2021 FI_B 00165 and 2022 FI_B1 00043). CPT acknowledges the PhD grant 2021 FISDU 00347 funded by Generalitat de Catalunya. EGR acknowledges funding provided by the Spanish Ministry of Science, Innovation and Universities (‘Ramón y Cajal’ fellowship RYC2018-026335-I). CA is grateful to the GEOXis Reseach Group (2021 SGR 00262) and the projects PID2020-117332GB-C21 (USAL) and PID2020-117332GB-C22 (UCM) funded by MCIN/AEI/10.13039/501100011033., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Fracture-related dolostones replacing Upper Jurassic–lowermost Cretaceous syn-rift deposits in the eastern Iberian Chain (eastern Spain)

  • Travé, Anna
  • Nadal, Judit
  • Playà, E.
  • Salas, Ramón
  • Cantarero, Irene
  • Baqués, Vinyet
  • Cruset, David
  • Gómez-Rivas, Enrique
  • Martín-Martín, Juan Diego
Upper Jurassic and Lower Cretaceous limestones and dolostones serve as hydrocarbon reservoirs in the offshore area of NE Spain. Since similar dolomitized rocks crop out in the adjacent onshore Maestrat Basin in the SE Iberian Range, understanding the dolomitization and other diagenetic processes is key to assessing reservoir properties. The Maestrat Basin dolostones crop out as elongated, asymmetric bodies, ranging from tens of centimetres to kilometres in length and up to 150 m thick, with a wedge-shaped geometry closely associated with fractures. These dolostones are calcium-rich with low concentrations of Mn, Sr, and Na, but variable Fe, indicating that the replacement of the host limestone was followed by dolomite cement precipitation. Fluid inclusion data suggest that dolomitization took place at temperatures ranging between 70 and 120 °C. Such temperatures, together with the high 87Sr/86Sr ratio and fluid salinity (16 to 23% wt. NaCl equivalent), reveal that the dolomitization process took place in burial conditions, from fluids that were infiltrated and likely interacted with Triassic, Liassic, and basement rocks. Although the exact age of dolomitization is not fully constrained, it is thought to coincide with fault-related dolomitization events of the same type previously described in the Maestrat Basin, likely during the latest Early Cretaceous and/or during the Late Cretaceous, in relation to the post-rift basin stage. Geochemical differences between the depocenters and structural highs may reflect the controls of the Maestrat Basin basin architecture on the composition and distribution of fluids., This work was supported by the framework of Spanish Projects DGICYT PID2021-122467NB-C22 (funded by Ministerio de Ciencia, Innovación y Universidades/Agencia Estatal de Investigación/Fondo Europeo de Desarrollo Regional, Unión Europea/10.13039/501100011033) and PID-2020-118999GB-I00 (funded by Ministerio de Ciencia, Innovación y Universidades/ Agencia Estatal de Investigación/10.13039/501100011033), and the Grup de Recerca reconegut per la Generalitat de Catalunya, 2021 SGR-Cat 00349 “Geologia Sedimentària”., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Microstructure and CPO evolution of dynamically recrystallized olivine during complex deformation conditions: a full-field numerical modeling approach

  • Yu, Yuanchao
  • Griera, Albert
  • Gómez-Rivas, Enrique
  • Bons, Paul D.
  • García-Castellanos, Daniel
  • Hao, Baoqin
  • Lebensohn, Ricardo A.
  • Seltzer, Cassandra
  • Llorens, Maria-Gema
The rheological properties of mantle rocks are strongly dependent on their crystallographic preferred orientation (CPO). Olivine CPO, defined by the orientation of seismically fast [100] axes parallel to flow direction, is also thought to be a dominant contributor to seismic anisotropy in the Earth's upper mantle. However, the amount of deformation needed to overprint a new CPO on a pre-existing fabric and the impact of the inherited CPOs on the transient microstructure evolution, remain unknown. This study employs a full-field numerical approach (VPFFT-ELLE) to explore the dynamic recrystallization and microstructural evolution of olivine polycrystalline aggregates under complex deformation conditions. We test four combinations of successive pure shear and simple shear boundary conditions. Findings indicate that inherited CPOs influence subsequent deformation in a manner dependent on the kinematic relationship between successive stages. In all cases, a minor strain increment (ε ∼0.3–0.6) is sufficient to erase the previous microstructure and CPO. However, when deformation conditions change dramatically (e.g., stretching direction changes orthogonally), the intensity of the new CPO developed is significantly lower and strain distribution are specially altered. During a transient strain stage, pre-existing microstructures undergo extensive reworking, especially when deformation conditions are changed dramatically, such as switching from simple shear to a pure shear condition with a parallel shortening direction relative to the stretching direction. We estimate the significance of these results in interpreting observations of seismic velocity anisotropy, concluding that P-wave seismic anisotropy is significantly and positively correlated with the evolution of olivine CPO with deformation history. This research underscores the transient nature of microstructural rearrangement in olivine aggregates and the necessity for caution in interpreting seismic anisotropy in regions with complex deformation histories, as inherited CPOs can influence current fabric development and induce deviation to the present deformation conditions., Yuanchao Yu acknowledges funding by the China Scholarship Council for a PhD scholarship (CSC-202008130104). This study was supported by DGICYT Spanish Projects PID-2021-122467NB-C21 and PID2022-139943NB-I00 (funded by the Ministerio de Ciencia e Innovación/Agencia Estatal de Investigación/10.13039/501100011033 and EU-FEDER), project PID2020-118999 GB-I00 (funded by the Ministerio de Ciencia e Innovación/Agencia Estatal de Investigación/10.13039/501100011033), and projects 2021 SGR 00349 “Geologia Sedimentària and 2021 SGR 00410 “GDL—Grup de Modelització Geodinàmica de la Litosfera” (funded by AGAUR). We acknowledge the “Consolidación Investigadora” Grants CNS2022-135819 (to MGL) and CNS2023-145382 (to EGR) (funded by MCIN/AEI/10.13039/50110001103 and European Union NextGenerationEU/PRTR)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

The influence of kinematics of deformation on polycrystalline halite dynamic recrystallization: Full-field simulation of simple shear versus pure shear

  • Hao, Baoqin
  • Griera, Albert
  • Llorens, Maria-Gema
  • Bons, Paul Dirk
  • Lebensohn, Ricardo A.
  • Yu, Yuanchao
  • Gómez-Rivas, Enrique
Rock salt, composed mainly of halite, flows viscoplastically over a wide range of geological conditions, strongly impacting the dynamic evolution of sedimentary basins and orogens. Understanding how dislocation creep, which involves dislocation glide, intracrystalline recovery and dynamic recrystallization, influences the microstructure and rheology of halite under various deformation kinematics and temperatures is crucial for enhancing knowledge of salt flow dynamics. This study employs a full-field numerical simulation method to compare the viscoplastic deformation of polycrystalline halite under simple shear and pure shear conditions up to a natural strain of ε = 1.5 at temperatures ranging from 100 °C to 300 °C. The results are presented in terms of crystallographic preferred orientation (CPO), grain shape preferred orientation (SPO), subgrain boundary direction, grain size and strain rate distribution. The results indicate that the crystallographic anisotropy of individual halite crystals is transferred to the polycrystalline scale, resulting in strain localization, particularly in simple shear simulations. The kinematics of deformation affect the evolution and distribution of high strain-rate bands, determining the direction of intragranular substructures and the morphology of strain-induced grain boundaries, with minimal impact on grain size. The intensity of grain boundary migration increases with temperature, significantly influencing grain morphology and size, thereby obscuring strain localization, while having little effect on CPOs. At low strain (ε < 1.0), CPOs relative to both the maximum shortening direction and the grain SPO are similar regardless of the deformation kinematics. At high strain (ε > 1.0), simple shear CPOs exhibit three stronger {100} maxima with a monoclinic symmetry relative to the grain SPO compared to the six {100} maxima with an orthotropic symmetry relative to the grain SPO generated under pure shear. Therefore, microstructures and CPOs can serve as indicators of the strain path in polycrystalline halite under various conditions, aiding in determining the shear sense and elucidating the deformation kinematics of salt structures., This study has been funded by DGICYT Spanish Projects PID-2020-118999GB-I00 (Ministerio de Ciencia e Innovación/Agencia Estatal de Investigación/10.13039/501100011033), PID-2021-122467NB-C21 (Ministerio de Ciencia e Innovación/Agencia Estatal de Investigación/10.13039/501100011033/FEDER), the “Consolidación Investigadora” grants CNS2022-135819 (to MGL) and CNS2023-145382 (to EGR) (Ministerio de Ciencia e Innovación/Agencia Estatal de Investigación/10.13039/501100011033 and EU NextGenerationEU/PRTR), and the 2021 SGR 00349 “Geologia Sedimentària” and 2021 SGR 00410 “Modelització Geodinàmica de la Litosfera” consolidated research groups (Agència de Gestió d’Ajuts Universitaris i de Recerca). Baoqin Hao acknowledges funding by the China Scholarship Council for a PhD scholarship (CSC-202006930010). EGR acknowledges the “Ramón y Cajal” Fellowship RyC-2018-026335-I, funded by the Ministerio de Ciencia e Innovación/Agencia Estatal de Investigación/10.13039/501100011033., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Hydrolytic weakening controls Jurassic to early Cretaceous mylonitisation in the basement of the Pyrenees

  • González-Esvertit, Eloi
  • Casas, Josep Maria
  • Canals, Àngels
  • Bons, Paul Dirk
  • Konrad, Kevin
  • Llorens, Maria-Gema
  • Serrano-López, Gabriel
  • Prieto-Torrell, Claudia
  • Neilson, Joyce
  • Domínguez-Carretero, Diego
  • Beranoaguirre de Miguel, Aratz
  • Gerdes, Axel
  • Gómez-Rivas, Enrique
The age of the mylonite belts in the basement rocks of the Pyrenees is a subject of debate in the structural geology and petrology communities because of its potential implication on the regional tectonothermal history and on the tectonic evolution of SW Europe. Here we address when and how mylonitisation took place in two key areas of the Eastern Pyrenees, where shear zones are associated with Giant Quartz Veins (GQVs). We conducted zircon U-Pb and muscovite 40Ar/39Ar dating coupled with structural, textural, and crystallographic preferred orientation (CPO) analyses of mylonites from the Cap de Creus and Canigó Massifs. U-Pb zircon dating of a dacite porphyry dyke crosscut by GQVs and mylonitic bands yields a maximum shear zone and GQV formation age of ca. 292 ± 3 Ma. 40Ar/39Ar analyses of muscovite within mylonitised GQVs yield initial crystallisation ages between ca. 164 and 188 Ma, as well as younger recrystallisation ages of ca. 110–118 Ma. A qualitative assessment of the GQV history is inferred from step-heating spectra of muscovite and quartz CPOs. The results indicate that GQV formation and mylonitisation were coupled, coeval, and long-lasting processes that took place from early Jurassic to early Cretaceous times. A comparative evaluation of quartz CPOs reveals inconsistencies regarding the strain distribution, quartz slip systems activity, and deformation temperatures depending on the deformed rock type. Quartz mylonites have stronger CPOs dominated by basal <a>, prism <a>, or prism <c> slip systems, whilst phyllonites and granite mylonites show weaker fabrics mostly dominated by mixed <a> slip. This apparently suggests higher deformation temperatures in quartz mylonites than those inferred from more reliable proxies, such as mineral assemblages, brittle behaviour of K-feldspar, and fluid inclusion data. We suggest that the water-weakening effect caused by coeval formation and deformation of GQVs enabled easier dislocation glide and creep, allowing strain localisation and transitions between slip systems at lower temperatures than commonly inferred due to enhanced ductility. U-Pb zircon dating further suggests the existence of an early Carboniferous (ca. 332 ± 4 Ma; Visean) magmatic episode in the Pyrenees, in agreement with a cyclic, rather than a progressive, geodynamic history of the region during Variscan times. The present work challenges classical interpretations stating that Pyrenean mylonite belts developed during the retrograde stages of the Variscan Orogeny, highlighting that the structural evolution of this region during Mesozoic times deserves further investigation. Results have implications for interpreting deformation localisation mechanisms and conditions in crustal rocks, for the formation mechanisms of GQVs in worldwide orogenic belts, and for the tectonothermal history of the Pyrenees since late-Variscan times., This research was funded by the DGICYT Projects PID2020-118999GBI00, PID2021-122467NB-C22, PID2021-125585NB-I00, and PID2022-139943NB-I00 (MCIN/AEI/FEDER-UE/10.13039/501100011033), CNS2023-145382 (MCIN/AEI/10.13039/501100011033/EUNextGenerationEU/PRT), the “Modelitzacio Geodinamica de la Litosfera” (Generalitat de Catalunya, 2021 SGR 00410), “Sedimentary Geology” (Generalitat de Catalunya, 2021 SGR 00349) and “GEOXiS” (Generalitat de Catalunya, 2021 SGR 00262) Consolidated Research Groups, and the VolcPeG Research Group. EGE acknowledges the funding provided by the Geological Society of London (GSL) Student Research Grants and the PhD grants funded by Generalitat de Catalunya and the European Social Fund (2021 FI_B 00165 and 2022 FI_B1 00043). CPT acknowledges the PhD grant 2021 FISDU 00347 funded by Generalitat de Catalunya. FIERCE is financially supported by the Deutsche Forschungsgemeinschaft (DFG: INST 161/921-1 FUGG, INST 161/923-1 FUGG and INST 161/1073-1 FUGG), and received financial support from the Wilhelm and Else Heraeus Foundation, which is gratefully acknowledged. This is FIERCE contribution No. 220., Peer reviewed
UPCommons. Portal del coneixement obert de la UPC
Publication Artículo científico (JournalArticle)

Lithofacies and cyclicity of sulphate dominated tidal-lagoon deposits of Late Triassic age in Northeast Iberia (western Europe)

  • Salvany Duran, Josep Maria|||0000-0003-1409-707X
  • Gisbert Pinto, Guillem
  • Martínez Bofill, Joan|||0000-0001-9147-3820
Thick gypsum-carbonate sequences were deposited in different periods and basins of Europe during the westward opening of the Tethys Ocean. Although they seem to represent widespread perimarine sulphate-dominated lagoons in shallow epeiric platforms, the sedimentary characteristics and interpretation of these deposits are still poorly constrained. To advance in the knowledge of these deposits, a detailed study is presented of two distinctive sulphate dominated sequences of Late Triassic age located in NE Iberia (Western Europe), which correspond to the Canelles and Espinagosa units, found in the southern Pyrenees and the Catalan Coastal Ranges respectively. These sequences present a diverse suite of carbonate and sulphate lithofacies, which are stacked in several recurring sedimentary cycles. These cycles consistently present a carbonate base that transitions to a sulphate top, and can be correlated along several tens of kilometres. Each of the observed cycles depicts an initial sudden flooding of a tidal-lagoon system by marine water, which led to carbonate-dominated sedimentation. Progressive evaporation under dominant arid climate conditions triggered the shallowing of the lagoon and salinisation of its water. Then, a transition from carbonate to gypsum/anhydrite precipitation and the early dolomitisation of the underlying carbonate sediments by brine reflux occurred. Gypsum precipitated in the water column as cumulate crystals and deposited at the bottom of the lagoon, forming laminations or being incorporated into microbial mats. Anhydrite precipitated as early diagenetic crystals in the different subaqueous and subaerial environments of the tidal-lagoon system, leading to a variated set of lithofacies until now largely undocumented. It mainly formed as displacive lath-shaped crystals randomly oriented within carbonate muds at the bottom of the lagoon, which were mostly reworked at the lagoon margins by wave and tidal currents resulting in aligned fabrics in cross-lamination structures. Anhydrite also formed as pure massive beds by anhydritisation of subaerially exposed gypsum sediments during the main retraction stages of the lagoon, as well as typical nodular (sabkha) lithofacies. Such sulphate lithofacies are not easy recognisable due to the lack of modern analogues to compare and to their current transformation into secondary gypsum in the outcrops. These are aspects to be taken into account in future sedimentological studies on similar evaporitic materials., Peer Reviewed
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

Lithofacies and cyclicity of sulphate dominated tidal-lagoon deposits of Late Triassic age in Northeast Iberia (western Europe)

  • Salvany Duran, Josep Maria
  • Gisbert Pinto, Guillem
  • Martínez Bofill, Joan
Thick gypsum-carbonate sequences were deposited in different periods and basins of Europe during the westward opening of the Tethys Ocean. Although they seem to represent widespread perimarine sulphate-dominated lagoons in shallow epeiric platforms, the sedimentary characteristics and interpretation of these deposits are still poorly constrained. To advance in the knowledge of these deposits, a detailed study is presented of two distinctive sulphate dominated sequences of Late Triassic age located in NE Iberia (Western Europe), which correspond to the Canelles and Espinagosa units, found in the southern Pyrenees and the Catalan Coastal Ranges respectively. These sequences present a diverse suite of carbonate and sulphate lithofacies, which are stacked in several recurring sedimentary cycles. These cycles consistently present a carbonate base that transitions to a sulphate top, and can be correlated along several tens of kilometres. Each of the observed cycles depicts an initial sudden flooding of a tidal-lagoon system by marine water, which led to carbonate-dominated sedimentation. Progressive evaporation under dominant arid climate conditions triggered the shallowing of the lagoon and salinisation of its water. Then, a transition from carbonate to gypsum/anhydrite precipitation and the early dolomitisation of the underlying carbonate sediments by brine reflux occurred. Gypsum precipitated in the water column as cumulate crystals and deposited at the bottom of the lagoon, forming laminations or being incorporated into microbial mats. Anhydrite precipitated as early diagenetic crystals in the different subaqueous and subaerial environments of the tidal-lagoon system, leading to a variated set of lithofacies until now largely undocumented. It mainly formed as displacive lath-shaped crystals randomly oriented within carbonate muds at the bottom of the lagoon, which were mostly reworked at the lagoon margins by wave and tidal currents resulting in aligned fabrics in cross-lamination structures. Anhydrite also formed as pure massive beds by anhydritisation of subaerially exposed gypsum sediments during the main retraction stages of the lagoon, as well as typical nodular (sabkha) lithofacies. Such sulphate lithofacies are not easy recognisable due to the lack of modern analogues to compare and to their current transformation into secondary gypsum in the outcrops. These are aspects to be taken into account in future sedimentological studies on similar evaporitic materials., Peer Reviewed, Postprint (author's final draft)
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

3DHIP-calculator-A new tool to stochastically assess deep geothermal potential using the heat-in-place method from voxel-based 3D geological models

  • Piris Casasnovas, Guillem|||0000-0002-2554-2178
  • Herms, Ignasi
  • Griera, Albert|||0000-0003-4598-8385
  • Colomer, Montse
  • Arnó, Georgina
  • Gomez-Rivas, Enrique|||0000-0002-1317-6289
The assessment of the deep geothermal potential is an essential task during the early phases of any geothermal project. The well-known "Heat-In-Place" volumetric method is the most widely used technique to estimate the available stored heat and the recoverable heat fraction of deep geothermal reservoirs at the regional scale. Different commercial and open-source software packages have been used to date to estimate these parameters. However, these tools are either not freely available, can only consider the entire reservoir volume or a specific part as a single-voxel model, or are restricted to certain geographical areas. The 3DHIP-Calculator tool presented in this contribution is an open-source software designed for the assessment of the deep geothermal potential at the regional scale using the volumetric method based on a stochastic approach. The tool estimates the Heat-In-Place and recoverable thermal energy using 3D geological and 3D thermal voxel models as input data. The 3DHIP-Calculator includes an easy-to-use graphical user interface (GUI) for visualizing and exporting the results to files for further postprocessing, including GIS-based map generation. The use and functionalities of the 3DHIP-Calculator are demonstrated through a case study of the Reus-Valls sedimentary basin (NE, Spain).
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Origin of the coloured karst fills in the neogene extensional system of ne iberia (Spain)

  • Travé i Herrero, Anna|||0000-0002-2735-3733
  • Rodríguez Morillas, Noelia
  • Baqués, Vinyet|||0000-0002-7779-4297
  • Playà i Pous, Elisabet
  • Casas, Lluís|||0000-0003-0948-8658
  • Cantarero, Irene|||0000-0001-5744-6773
  • Martín Martín, Juan Diego|||0000-0002-6530-6196
  • Gomez-Rivas, Enrique|||0000-0002-1317-6289
  • Moragas Rodríguez, Mar
  • Cruset, David
Karst fills from the onshore Penedès Basin and offshore València Trough display red, pink, orange and ochre colours. Their Mössbauer spectra indicate that Fe contained in goethite is the dominant species in reddish-pink fills, whereas Fe contained in dolomite and clays is more dominant in the orange and ochre ones. The lower δ C values and higher Sr/ Sr ratios of the karst fills with respect to their host carbonates can reflect the input of soil-derived CO and an external radiogenic source into the karst system. This geochemical composition, together with the non-carbonate fraction of the fills, consists of authigenic and transported illite, illite-smectite interlayers, as well as kaolinite, chlorite, pyrite, quartz, ilmenite, magnetite, apatite and feldspar, account for a mixed residual-detrital origin of fills. This polygenic origin agrees with that of the terra rossa sediments described worldwide. The different colours of karst fills are attributed to fluctuations in the water table, which control the Eh/pH conditions in the karst system. Thus, reddish colours reflect low water table levels and oxidising episodes, and orange and ochre ones reflect high water table levels and more reducing episodes. The greenish colours of fills could be related to fluctuations in the Fe /Fe ratio.