Skip to main content

EVAPORACION NATURAL ASISTIDA CON MATERIALES ABSORBENTES DE BAJO COSTE PARA EL TRATAMIENTO DE EFLUENTES CONCENTRADOS DE GESTION COMPLEJA

PID2020-119142RA-I00

•
Funding agency name Agencia Estatal de Investigación
Funding agency acronym AEI
Program Programa Estatal de I+D+i Orientado a los Retos de la Sociedad
Call Proyectos de I+D+i (Generación de Conocimiento y Retos Investigación)
Call year 2020
State Plan 2017-2020 Plan Estatal de Investigación Científica y Técnica y de Innovación
Beneficiary centre UNIVERSITAT POLITÈCNICA DE VALÈNCIA

Resultados relacionados

Resultados totales (Incluyendo duplicados): 11
Encontrada(s) 1 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Efficient single-step reactive compatibilization of hemp flour-reinforced PLA/TPS blends: Exploring eco-friendly alternatives and bio-based compatibilizers from maleinized hemp oil

  • Lerma-Canto, Alejandro
  • Domínguez-Candela, Iván|||0000-0003-3288-1079
  • Gómez-Caturla, Jaume|||0000-0001-8680-4509
  • Fombuena, Vicent|||0000-0001-7266-6205
  • Garcia-Garcia, Daniel|||0000-0002-2520-0186
[EN] In a blend of poly(lactic acid) (PLA) and thermoplastic starch (TPS), a 15% load of hemp seed lignocellulosic filler (HF) was incorporated. Additionally, separate petrochemical-based compatibilizers, such as dicumyl peroxide (DCM) and benzoyl peroxide (LRL), as well as a bio-based compatibilizer, maleinized hemp seed oil (MHO), were introduced. Adding HF to the PLA/TPS blend reduced tensile mechanical properties due to the stress concentration phenomenon arising from the lack of interaction between components, yielding a more brittle material. This issue was mitigated by adding compatibilizers, notably the incorporation of MHO into the PLA/TPS/HF blend this increased elongation at break by enhancing compatibility among the blend components and providing a plasticizing effect. Moreover, regarding thermal properties, it was observed that the inclusion of HF led to a decrease in the glass transition temperature (Tg), cold crystallization temperature (Tcc), and melting temperature (Tm). Conversely, adding MHO to this blend increased all these values compared to the PLA/TPS/HF mixture, attributed to the plasticizing effect imparted by the modified oil. Additionally, following fracture in Charpy impact testing, the samples were subjected to field emission scanning electron microscopy (FESEM) analysis to examine the fractured surface of the various samples., This research work was funded by the Ministry of Science and Innovation through Retos de la Sociedad , project reference PID2020-119142RA-I00 and is part of the grant PID2020-116496RB-C22, funded by MCIN/AEI/10.13039/ 501100011033 and the grant TED2021-131762A-I00, funded by MCIN/AEI/10.13039/501100011033 and by the European Union NextGenerationEU /PRTR. The authors also thank Generalitat Valenciana-GVA for funding this research through the grant numbers AICO/2021/025 and CIGE/2021/ 094. Funded with Aid for First Research Projects (PAID-06- 22), Vice-rectorate for Research of the Universitat Politècnica de València (UPV). J. Gomez-Caturla wants to thank FPU20/01732 grant funded by MCIN/AEI/10.13039/ 501100011033 and by ESF Investing in your future.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Novel compatibilizers and plasticizers developed from epoxidized and maleinized chia oil in composites based on PLA and chia seed flour

  • Domínguez-Candela, Iván|||0000-0003-3288-1079
  • Gómez-Caturla, Jaume|||0000-0001-8680-4509
  • Cardona, S. C.|||0000-0002-2882-3098
  • Lora-García, Jaime|||0000-0003-1699-5404
  • Fombuena, Vicent|||0000-0001-7266-6205
[EN] Novel compatibilizers and plasticizers derived from epoxidized chia seed oil (ECO) and maleinized chia seed oil (MCO) have been applied in composites based on poly(lactic acid) (PLA) and 15 wt% chia seed flour (CSF). Results obtained have been compared to conventional silane coupling agent, (3-glycidyloxypropyl) trimethoxysilane (GPS), and a petroleum-based compatibilizer, poly(styrene-co-glycidyl methacrylate) copolymer (Xibond, (R)). The compatibilization effect of green composites were assessed by FTIR. The addition of all four compatibilizers improved the ductile mechanical and thermal properties of the composites. The morphology analysis revealed an improvement of interfacial adhesion of the CSF particles into the PLA matrix. In particular, ECO and MCO composites showed a roughness with long filaments in their morphology which plays a crucial role in improving the ductile properties highly. The elongation at break was 10 and 8 times higher using ECO and MCO, respectively, compared to uncompatibilized composite. Moreover, the composites manufactured showed low values (<9%) in the water uptake assay and a negligible compostability delay. The use of novel compatibilizers based on modified vegetable oils could mean an interesting proposal to obtain an entirely environmentally friendly composite with a remarkable ductile property., This research work was funded by the Ministry of Science and Innovation-¿Retos de la Sociedad¿. Project references: PID2020-119142RA-I00. I. Dominguez-Candela wants to thank Universitat Politècnica de València for his FPI grant (PAID-2019-SP20190013) and Generalitat Valenciana-GVA (ACIF/2020/233). J. Gomez-Caturla wants to thank Generalitat Valenciana-GVA, for his FPI grant (ACIF/2021/185) and grant FPU20/01732 funded by MCIN/AEI/10.13039/ 501100011033.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Optimizing rheological performance of unsaturated polyester resin with biobased reactive diluents: A comprehensive analysis of viscosity and thermomechanical properties

  • Grimalt, J.
  • Frattini, L.
  • Carreras, P.
  • Fombuena, Vicent|||0000-0001-7266-6205
[EN] Bio-based reactive diluents (RD) have been explored as alternative to styrene (STY) in unsaturated polyester resin (UPR). Among the different candidates, acrylated epoxidized soybean oil (AESO) and epoxidized linseed oil (ELO) stand out as triglyceride derivatives. Aditionally, methyl methacrylate (MMA), trimethylolpropane triacrylate (TMPTA) with acrylic functionality, limonene (LIM), and cinnamates (CINN), has been tested in different percentages. Firstly, their efficiency in viscosity reduction has been studied. Best results were obtained after the addition of MMA, LIM, and CINN at 5 wt%. These RD achieve a viscosity reduction of 48.9 %, 76.7 %, and 22.9 %, respectively, compared to the reference sample. The industrial utilization of CINN as RD is impeded by its reactivity, as has been evidenced by its prolonged reaction time (24 min) and low reaction enthalpy. The thermo-mechanical properties studied through flexural tests, Shore D hardness, Charpy¿s Impact test, and heat deflection temperature (HDT), show that the developed UPRs exhibit a decrease in resistant mechanical properties while doubling their ductility by using LIM and MMA as bio-based RD (1.88 and 2.15 kJ m¿ 2 , respectively). The HDT study results demonstrate a certain level of thermal stability when MMA is employed (56 ¿C), which is 15 % lower in the case of LIM. Therefore, it is observed that UPRs with bio-based RD exhibit balanced and improved thermo-mechanical properties in terms of ductility and strength, especially with the use of a 5 wt % of LIM and MMA., This work has been developed in the context of EOCENE project (Circular Economy in the Thermostable Composites Industry) supported by the Ministry of Science and Innovation of Spain through the Misiones Ciencia e Innovacion" ¿ program in its 2019 call. The program Misiones is managed by the Center for Industrial Technological Development (CDTI), and is co-founded with FEDER funds through the Plurirregional Operational Program of Spain 2014 2020 (POPE). On the other hand, the UPV would like to thank the funding received by Ministry of Science and Innovation of Spain through the Retos de la Sociedad . Project references: PID2020- 119142RA-I00.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Novel Epoxidized Brazil Nut Oil as a Promising Plasticizing Agent for PLA

  • Perez-Nakai, Aina
  • Lerma-Canto, Alejandro
  • Domínguez-Candela, Iván|||0000-0003-3288-1079
  • Ferri, J.M|||0000-0002-1269-4973
  • Fombuena, Vicent|||0000-0001-7266-6205
[EN] This work evaluates for the first time the potential of an environmentally friendly plasticizer derived from epoxidized Brazil nut oil (EBNO) for biopolymers, such as poly(lactic acid) (PLA). EBNO was used due to its high epoxy content, reaching an oxirane oxygen content of 4.22% after 8 h of epoxidation for a peroxide/oil ratio of 2:1. Melt extrusion was used to plasticize PLA formulations with different EBNO contents in the range of 0-10 phr. The effects of different amounts of EBNO in the PLA matrix were studied by performing mechanical, thermal, thermomechanical, and morphological characterizations. The tensile test demonstrated the feasibility of EBNO as a plasticizer for PLA by increasing the elongation at break by 70.9% for the plasticized PLA with 7.5 phr of EBNO content in comparison to the unplasticized PLA. The field-emission scanning electron microscopy (FESEM) of the fractured surfaces from the impact tests showed an increase in porosity and roughness in the areas with EBNO addition, which was characteristic of ductile failure. In addition, a disintegration test was performed, and no influence on the PLA biodegradation process was observed. The overall results demonstrate the ability of EBNO to compete with other commercial plasticizers in improving the ductile properties of PLA., This research work was funded by the Ministry of Science and Innovation, ¿Retos de la Sociedad¿, project references: PID2020-119142RA-I00. I.D.-C. would like to thank the Universitat Politècnica de València for his FPI grant (PAID-2019-SP20190013) and the Generalitat Valenciana (GVA) for his FPI grant (ACIF/2020/233).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Development of a novel epoxy resin based on epoxidized chia oil as matrix and maleinized chia oil as bio-renewable crosslinker

  • Domínguez-Candela, Iván|||0000-0003-3288-1079
  • Lora-García, Jaime|||0000-0003-1699-5404
  • Fombuena, Vicent|||0000-0001-7266-6205
  • Perez-Nakai, Aina
  • Torres-Roca, Elena
[EN] In this work novel thermosetting resins with high bio-based content have been developed derived from chia seed oil (CO). Epoxidized chia seed oil (ECO) was used as bio-based epoxy matrix with different mixtures of crosslinker agents, that is, methyl nadic anhydride (MNA) as petroleum-derived and maleinized chia seed oil (MCO) as bio-based crosslinker. The chemically modified oils from CO, that is, ECO and MCO, and MNA were analyzed by titration and FT-IR. Additional 1H NMR analysis was performed to characterize MCO structure. Two different behaviors were observed using the mixtures of crosslinkers. On one hand, MNA increases the rigidity with bio-based content of 54.2%. On the other hand, the addition of MCO provides higher ductility with bio-based content up to 98%. The same trend was observed by DMTA analysis. The novel cured resins were successfully crosslinked as demonstrated by the mechanical properties, FT-IR analyses, and gel content. Based on the results, it is concluded that MCO presents higher reactivity than MNA, decreasing curing time with possible energy saving at industrial level. In general, the results showed that adding the appropriate amount of MCO, green thermosetting resins with the desired thermal and mechanical properties can be manufactured with high bio-based content., Ministry of Science and Innovation,Grant/Award Number: PID2020-119142RA-I00; Universitat Politecnica de Valencia, Grant/Award Number: PAID-2019-SP20190013; Generalitat Valenciana,Grant/Award Number: ACIF/2020/233. This research work was funded by the Ministry of Science and Innovation-¿Retos de la Sociedad¿. Project references: PID2020-119142RA-I00. I. Dominguez-Candela wants to thank Universitat Politècnica de València for his FPI grant (PAID-2019-SP20190013) and Generalitat Valenciana-GVA (ACIF/2020/233). Funding for open access charge: CRUE-Universitat Politècnica de València.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Experimental Study and Mathematical Modeling of a Nanofiltration Membrane System for the Recovery of Polyphenols from Wine Lees

  • López-Borrell, Alexis
  • López Pérez, Maria Fernanda|||0000-0002-5815-9212
  • Cardona, S. C.|||0000-0002-2882-3098
  • Lora-García, Jaime|||0000-0003-1699-5404
[EN] The winemaking process in Spain generates a significant amount of wastes such as wine lees. Currently, the nanofiltration process is a viable technique for the revalorization of compounds from wastes. In this aspect, this technique can be used for the recovery of compounds, such as polyphenols, as well as active principles widely used in industries, such as pharmaceuticals or cosmetics. Polyphenols are found in acceptable amounts in wine lees wastes and it is interesting to study the nanofiltration process viability to recover them. In order to study this possibility, it is necessary to determine the choice of the best membrane to use and the effect of operational parameters such as pressure, temperature, cross-flow rates, and concentration. In addition, it is important to be able to develop a mathematical model that can help in the future design of lees treatment plants. The treatment of red wine lees to concentrate polyphenols has been studied in a laboratory plant using different membranes (RO and NF) at different pressures (4.5, 9.5, and 14.5 bar), different temperatures (293, 303, and 308 K), and two concentrations (2100 and 1100 mg tyrosol eq center dot L-1). The results have been encouraging to consider nanofiltration as a viable technique for the treatment and revalorization of this waste. The most suitable membrane has been the NF270, in which 96% rejection rates have been obtained, with a flux of 30 L center dot h(-1)center dot m(-2). Moreover, in this study, the Spiegler-Kedem model (SKM) was used to calculate mass transfer constants and permeabilities. Suitable adjustments of these parameters were obtained to validate this mathematical model. For this reason, the SKM might be used in future studies to continue in the research work of the treatment of wine lees wastes., This research work was funded by the Ministry of Science and Innovation, "Retos de la Sociedad". Project reference: PID2020-119142RA-I00.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Epoxidized and Maleinized Hemp Oil to Develop Fully Bio-Based Epoxy Resin Based on Anhydride Hardeners

  • Lerma-Canto, Alejandro
  • Samper, María-Dolores|||0000-0002-5102-8412
  • Domínguez-Candela, Iván|||0000-0003-3288-1079
  • Garcia-Garcia, Daniel|||0000-0002-2520-0186
  • Fombuena, Vicent|||0000-0001-7266-6205
[EN] The present work aims to develop thermosetting resins using epoxidized hemp oil (EHO) as a bio-based epoxy matrix and a mixture of methyl nadic anhydride (MNA) and maleinized hemp oil (MHO) in different ratios as hardeners. The results show that the mixture with only MNA as a hardener is characterized by high stiffness and brittleness. In addition, this material is characterized by a high curing time of around 170 min. On the other hand, as the MHO content in the resin increases, the mechanical strength properties decrease and the ductile properties increase. Therefore, it can be stated that the presence of MHO confers flexible properties to the mixtures. In this case, it was determined that the thermosetting resin with balanced properties and high bio-based content contains 25% MHO and 75% MNA. Specifically, this mixture obtained a 180% higher impact energy absorption and a 195% lower Young's modulus than the sample with 100% MNA. Also, it has been observed that this mixture has significantly shorter times than the mixture containing 100% MNA (around 78 min), which is of great concern at an industrial level. Therefore, thermosetting resins with different mechanical and thermal properties can be obtained by varying the MHO and MNA content., This research was funded by MCIN/AEI/ 10.13039/501100011033 through the PID-AEI Project (grants PID2020-119142RA-I00 and PID2021-123753NA-C33) and the TED-AEI Project (grants TED2021-129920A-C43 and TED2021-131762A-100) and, as appropriate, by ¿ERDF A way of making Europe¿, by the ¿European Union¿ or by the ¿European Union NextGenerationEU/PRTR¿. Dominguez-Candela wants to thank Universitat Politècnica de València for his FPI grant (PAID-2019-SP20190013) and Generalitat Valenciana (GVA) for his FPI grant (ACIF/2020/233).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Assessing novel thermoset materials from Brazil nut oil: Curing, thermal and mechanical properties

  • Perez-Nakai, Aina
  • Lerma-Canto, Alejandro
  • Trejo-Machín, Acerina
  • Domínguez-Candela, Iván|||0000-0003-3288-1079
  • Ferri, J.M|||0000-0002-1269-4973
  • Fombuena, Vicent|||0000-0001-7266-6205
[EN] The present work describes, for the first time, the chemical modification and characterization of epoxy resins derived from Brazil nut oil (BNO). The development of a bio-based resin has been carried out by chemically modifying BNO, resulting in epoxidized Brazil nut oil (EBNO). Moreover, through a maleinization process, a crosslinker based on maleinized Brazil nut oil (MBNO) has been employed.Analysis using techniques like iodine value (IV) and oxirane oxygen content (Oo) indicate successful chemical modification. FTIR analysis confirms the presence of reactive functional groups in both EBNO and MBNO, which are responsible for resin crosslinking. Mechanical testing of the different bio-resins developed shows that, in the cured resins, flexural strength and modulus decrease with increasing MBNO content, indicating improved flexibility due to the introduction of MBNO as a crosslinker. Thermal analysis using differential scanning calorimetry (DSC) reveals exothermic peaks corresponding to resin curing appearing at progressively lower temperatures. Therefore, this study successfully modifies BNO and demonstrates its effectiveness as a precursor to develop bio-based epoxy resins. The resulting resins exhibit improved ductile and thermal properties, making them suitable for various applications requiring low mechanical stresses., This research work was funded by the Ministry of Science and Innovation Retos de la Sociedad . Project references: PID2020-119142RA-I00.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Physicochemical Characterization of Novel Epoxidized Vegetable Oil from Chia Seed Oil

  • Domínguez-Candela, Iván|||0000-0003-3288-1079
  • Cardona, S. C.|||0000-0002-2882-3098
  • Lora-García, Jaime|||0000-0003-1699-5404
  • Fombuena, Vicent|||0000-0001-7266-6205
  • Lerma-Canto, Alejandro
[EN] In this study, a novel epoxidized vegetable oil (EVO) from chia seed oil (CSO) has been obtained, with the aim to be employed in a great variety of green products related to the polymeric industry, as plasticizers and compatibilizers. Previous to the epoxidation process characterization, the fatty acid (FA) composition of CSO was analyzed using gas chromatography (GC). Epoxidation of CSO has been performed using peracetic acid formed in situ with hydrogen peroxide and acetic acid, applying sulfuric acid as catalyst. The effects of key parameters as temperature (60, 70, and 75 degrees C), the molar ratio of hydrogen peroxide:double bond (H2O2:DB) (0.75:1.0 and 1.50:1.0), and reaction time (0-8 h) were evaluated to obtain the highest relative oxirane oxygen yield (Y-oo). The evaluation of the epoxidation process was carried out through iodine value (IV), oxirane oxygen content (O-o), epoxy equivalent weight (EEW), and selectivity (S). The main functional groups were identified by means of FTIR and H-1 NMR spectroscopy. Physical properties were compared in the different assays. The study of different parameters showed that the best epoxidation conditions were carried out at 75 degrees C and H2O2:DB (1.50:1), obtaining an O-o value of 8.26% and an EEW of 193 (g center dot eq(-1)). These high values, even higher than those obtained for commercial epoxidized oils such as soybean or linseed oil, show the potential of the chemical modification of chia seed oil to be used in the development of biopolymers., This research work was funded by the Ministry of Science and Innovation-"Retos de la Sociedad". Project reference: PID2020-119142RA-I00. I. Dominguez-Candela wants to thank Universitat Politecnica de Valencia for his FPI grant (PAID-2019-SP20190013) and Generalitat Valenciana (GVA) for his FPI grant (ACIF/2020/233).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Characterization of Natural and Synthetic Fabrics for the Treatment of Complex Wastes

  • López-Borrell, Alexis
  • Lora-García, Jaime|||0000-0003-1699-5404
  • Fombuena, Vicent|||0000-0001-7266-6205
  • Cardona, S. C.|||0000-0002-2882-3098
  • López Pérez, Maria Fernanda|||0000-0002-5815-9212
[EN] In the present study, nine fabrics have been tested for brackish water treatment with the aim of industrial application under the concept of zero liquid discharge (ZLD). Moisture content was determined, where it was observed that the lignocellulosic fabrics had a moisture content ranging from 2.5 to 8.5%. The wetting contact angle showed that the flax with polylactic acid (LPLA) was the most hydrophobic. The determination of the liquid absorption capacity showed that, of the synthetic fabrics, the one with the highest absorption, both in distilled water and in brackish water, was the polyester (PES) fabric with an absorption of 816% compared to its initial weight. In the natural fabrics, the highest absorption capacity was shown by the wet-laid without treatment (WL-WT) fabric for both distilled water and brackish water, although it required several cycles of operation to maintain this stable absorption. Exposure to brackish water improved the absorption capacity of all samples. Mechanical and thermal characterization showed that the synthetic fabrics were more resistant than the natural fabrics, although they may compete in terms of applicability. The capillarity study showed that the most hydrophilic fabrics completed the test the fastest. Finally, the composting degradation test showed that those fabrics with polylactic acid (PLA) content degraded faster in the first 14 days and thereafter the degradation of the lignocellulosic content showed a slower degradation until 112 days. The Bam fabric did not degrade during the course of the experiment., This research work was funded by the Ministry of Science and Innovation, "Retos de la Sociedad". Project reference: PID2020-119142RA-I00.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Vapor Pressure and Evaporation Studies of Saline Solutions on Natural and Synthetic Fabrics for Industrial Water Treatment

  • López-Borrell, Alexis
  • Lora-García, Jaime|||0000-0003-1699-5404
  • Cardona, S. C.|||0000-0002-2882-3098
  • López Pérez, Maria Fernanda|||0000-0002-5815-9212
  • Fombuena, Vicent|||0000-0001-7266-6205
[EN] In the present paper, we have conducted a comprehensive analysis of vapor pressures of both saturated and unsaturated solutions, alongside a study of evaporation using synthetic and natural fabrics for industrial applications in brackish water treatment under zero liquid discharge (ZLD) philosophy. By determining the vapor pressures of saturated solutions, we obtained results consistent with those of other researchers, extending the range of tested temperatures from 1 to 50 ¿C and successfully fitting the parameters of an Antoine-type equation. Similarly, positive results were achieved for unsaturated solutions, where various parameters of different equations accounting for the salt concentration were estimated, simplifying the fitting procedure. Natural evaporation tests from water surfaces using saturated solutions revealed that salts with higher associated vapor pressures exhibit higher evaporation rates. On the other hand, hydrated salts retain water in their structure and are significantly affected by ambient humidity. Evaporation studies on natural and synthetic fabrics with saturated NaCl and CuSO4 ·5H2O solutions showed distinct behaviors. NaCl increased both the evaporation rate and salt deposition with each cycle. In contrast, CuSO4 ·5H2O reduced the absorption capacity by blocking the fabric¿s structure, decreasing the evaporation efficiency over successive cycles., This research work was funded by the Ministry of Science and Innovation, Retos de la Sociedad . Project reference: PID2020-119142RA-I00.