Skip to main content

NUEVAS APROXIMACIONES A LA CARACTERIZACION DE FUENTES SISMICAS Y SU INTEGRACION EN MODELOS DE PELIGROSIDAD SISMICA BASADAS EN FALLAS. ESTUDIO DE CASOS EN EL ESTE DE IBERIA

PID2020-119772RB-I00

•
Funding agency name Agencia Estatal de Investigación
Funding agency acronym AEI
Program Programa Estatal de I+D+i Orientado a los Retos de la Sociedad
Call Proyectos de I+D+i (Generación de Conocimiento y Retos Investigación)
Call year 2020
State Plan 2017-2020 Plan Estatal de Investigación Científica y Técnica y de Innovación
Beneficiary centre UNIVERSIDAD DE BARCELONA

Resultados relacionados

Resultados totales (Incluyendo duplicados): 6
Encontrada(s) 1 página(s)

DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Exploring the Connection of XVI-Century Major Historical Earthquakes in the Eastern Betic Cordillera, Spain: Insights From Viscoelastic Relaxation of the Lithosphere

  • Yazdi, Pouye
  • García Mayordomo, Julián
  • Álvarez Gómez, José Antonio
  • Gaspar Escribano, Jorge
  • Masana, Eulàlia
[EN] Understanding the crustal fault interaction and connection between earthquakes in areas with slow tectonic deformation, such as Betic Cordillera (South Spain), is challenging. When seismic rates are low and large destructive earthquakes happen less frequently, it is necessary to resort to historical or paleoseismic records. This study investigates the postseismic viscoelastic relaxation mechanism as a potential explanation for the occurrence of three historical earthquakes (IEMSVIII-IX) in the Eastern Betic Shear Zone during the XVI-century, all of which occurred within a span of 13 years: 1518 Vera Mw6.2, 1522 Alhama de Almeria Mw6.5, and 1531 Baza Mw6.2 associated with the Palomares, Carboneras, and Baza faults, respectively. The results strongly suggest a sequential stress-triggering connection between the three events. The northern NS-oriented section of the Baza fault is found to have experienced a larger positive ΔCFS and, indeed, more prone to rupture in 1531. The study also examines whether the cumulative ΔCFS had influenced the occurrence of further significant earthquakes (≥Mw6.0) in the region. A triggering connection between the cascade and the 1658 Almeria Mw6.2 earthquake is suggested, whereas no indications of similar linkage to the 1674 Lorca Mw6.0 or the 1804 Dalias Mw6.4 events are found. The stress triggering impact of the cascade over nearby active faults is noteworthy. It is expected that this analysis could have future applications for studying other important historical events, and improving seismic hazard analysis in complex fault settings of the Betic Cordillera., This research has the financial support of Project NSources, Grant PID2020-119772RB-I00 funded by MCIN/AEI/ 10.13039/501100011033., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

New Insights on the Crustal Deformation in the Eastern Betics From Densified GNSS Data

  • Portela, J. J.
  • Staller, Alejandra
  • Béjar Pizarro, Marta
  • Martínez Díaz, J. J.
  • Álvarez Gómez, José Antonio
  • Khazaradze, Giorgi
[EN] The Eastern Betic cordillera, southeastern Spain, is characterized by slow tectonic deformation rates and moderate seismicity. Great uncertainties persist regarding the precise kinematics of the main fault system within the region, the Eastern Betic Shear Zone (EBSZ). We present a new GNSS (Global Navigation Satellite System) velocity field in the Eastern Betics, including new episodic and continuous stations belonging to the GeoActiva network, as well as all available continuous stations in southern Iberia. We use this data to build kinematic models with elastic blocks, obtaining slip rates and locking ratios in the main faults of the EBSZ. Our model suggests that the central EBSZ is dominated by reverse and sinistral motion, accommodated by two fault branches closing the Guadalentín and Segura valleys. For the first time, we use geodetic data to quantify how slip is distributed between these branches in the central EBSZ: the Alhama de Murcia fault (western branch) accommodates up to 1.3 mm/yr sinistral and 0.6 mm/yr reverse slip, while the Palomares fault (eastern branch) is slower (0.5 mm/yr sinistral and 0.3 mm/yr reverse slip). Although slip rates are higher in the south Palomares and Carboneras faults, data scarcity limits their constraint. The deformation in the northern limit of the Eastern Betics appears to be distributed between the Jumilla and Crevillente faults. On a regional scale, our data suggest that the Nubia-Eurasia plate convergence is distributed radially from the Eastern Betics, consistent with the escape of multiple blocks driven by indentation and rollback tectonics in the Alboran Sea., This work is part of the PhD thesis of J.P. and was supported by Grant FPU19/03929, funded by MCIN/AEI/10.13039/501100011033 and by “FSE invests in your future”; by (GeoActiva) Project CGL2017-83931-C3-3-P, funded by MCIN/AEI/10.13039/501100011033 and by “ERDF A way of making Europe”; as well as by projects SARAI (PID2020-116540RB-C22) and NSOURCES (PID2020-119772RB-I00), funded by MCIN/AEI/10.13039/501100011033., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Improved Geological Slip Rate Estimations in the Complex Alhama de Murcia Fault Zone (SE Iberia) and Its Implications for Fault Behavior

  • Gómez Novell, Octavi
  • Ortuño, María
  • García Mayordomo, Julián
  • Insúa Arévalo, Juan Miguel
  • Rockwell, Thomas
  • Baize, Stéphane
  • Martínez-Díaz, J. J.
  • Pallàs, Raimon
  • Masana, Eulàlia
30 p., [EN] Fault slip rate is one of the most crucial parameters to characterize earthquake occurrence in fault-based seismic hazard assessments (SHA). Accordingly, paleoseismic studies have increasingly focused on constraining this parameter in active faults worldwide. We present a comprehensive paleoseismic study in the Alhama de Murcia Fault (AMF), one of the most active faults in SE Spain and source of destructing earthquakes such as the 2011 M<inf>w</inf> 5.2 Lorca event. Contrasting with previous studies, we integrate paleoseismic data from four fault strands in the AMF and, based on trench slip analysis and numerical dates, we derive slip rate estimates of each strand over the whole transect and assess their time variability. The AMF has a minimum net slip rate between 1.35+0.16−0.10 and 1.64+0.16−0.11 mm/yr for the past 18 ± 1 to 15.2 ± 1.1 ka. These results prove the importance of accounting for the complete sections of a geological structure as they are almost twice the previous estimates for a single fault branch. Slip rate variability is identified in the AMF, with cyclic acceleration-quiescence patterns that could be related to stress field changes driven by fault interaction or synchronicity with neighboring faults (e.g., Carrascoy). We hope that the data presented here motivates their inclusion into forthcoming fault-based SHAs. In this regard, limitations related to the lack of paleoseismic data for one fault strand, along with poor characterization of the strike component of slip and insufficient age control of the units for another strand are highlighted and need to be accounted for by modelers., This work has been supported by the “PREVENT” project (ref. CGL2015-66263-R) funded by the former Spanish of Economy, Industry and Competitiveness as well as by the “NSOURCES” project (ref. PID2020-119772RB-I00) funded by the Spanish Ministry of Science and Innovation. The work is part of the doctoral thesis of Octavi Gómez-Novell (Formación de Personal Investigador grant by the former Spanish of Economy, Industry and Competitiveness: ref. BES-2016-077048)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Active Fault Interaction in the Eastern Betic Cordillera: A Model of Coseismic and Postseismic Stress Transfer Following Historical Earthquakes in SE Spain

  • Yazdi, Pouye
  • García Mayordomo, Julián
21 p., [EN] The Spanish historical earthquake catalog reveals a significant number of destructive earthquakes ((Formula presented.) Mw 6.0) that have occurred along the Eastern Betic Shear Zone (EBSZ), a major active fault system at the Eastern Betic Cordillera. However, during the last century, seismic activity in this region has been characterized by the absence of large-magnitude events, complicating yet underlining the importance of understanding active fault interaction in the EBSZ. In this work, we focus on the northeastern half of the EBSZ and apply a similar method to Yazdi et al. (2023, https://doi.org/10.1029/2023tc007917). We model a series of consecutive earthquakes ((Formula presented.) (Formula presented.) VII; (Formula presented.) Mw 5.0) between the (Formula presented.) and (Formula presented.) centuries occurring along the Alhama de Murcia, Carrascoy and Bajo Segura faults, and assess their coseismic impact as well as explore the evolution of Coulomb stress changes due to the postseismic viscoelastic relaxation on the surrounding faults. Our results support a stress-triggering connection between subsequent events and shed light on identifying the responsible faults for some. Our findings indicate that 1673 Mw 6.0 Orihuela and 1674 Mw 6.2 Lorca earthquakes, seemingly unrelated, could have both contributed to the forthcoming (Formula presented.) Mw 5.0 earthquake clustering along the Carrascoy fault. We show that attributing the 1829 Mw 6.6 Torrevieja earthquake to the Bajo Segura fault better describes the occurrence of earthquake sequences between the mid- (Formula presented.) and early (Formula presented.) centuries. Finally, we propose the Alhama de Murcia and the Carrascoy faults as responsible initiators for the early (Formula presented.) -century earthquake sequence in the Segura Medio valley. These findings provide valuable insights for seismic hazard modeling in the region., This research has the financial support of Project NSources, grant PID2020-119772RB-I00 funded by MCIN/AEI/10.13039/501100011033., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Digital surface models derived from historical aerial imagery in highly anthropized areas applied to active fault studies (eastern Betics, Spain)

  • Molins-Vigatà, J.
  • Blanch, Xabier
  • Martín Banda, Raquel
  • García Sellés, David
  • Gómez Novell, Octavi
  • García Mayordomo, Julián
  • Insúa Arévalo, Juan Miguel
  • Ortuño, María
22 p., [EN] Landform recognition and surface analysis are critical in geomorphological and morphotectonic studies. In particular, the detailed study of the surface expression of active faults is essential for their characterization as seismic sources in fault-based seismic hazard models. However, increasing anthropogenic action has profoundly altered the natural landscape, degrading or erasing tectonic landforms, and limiting the accurate characterization of active faults in many regions worldwide. A paradigmatic example is the southeastern Iberian Peninsula, where extensive agricultural development over last decades has completely transformed the natural landscape. To address this limitation, we produced three historical Digital Surface Models (DSMs) using historical aerial imagery across two active faults in the Betic Cordillera: the Palomares and Llano del Águila faults. Two DSMs were generated for the Palomares Fault (one from the American B-series Flight, 1956–1957, and one from the Interministerial Flight, 1973–1986), and one DSM was generated for the Llano del Águila Fault from the Interministerial Flight, all with a spatial resolution of 2× 2 m. We introduce Surface Roughness as a new diagnostic metric to assess quality and to identify model artifacts, while DEM of Difference analyses were used to quantify elevation changes and assess the consistency of the reconstructed surfaces. Rather than focusing solely on absolute geolocation accuracy, our approach emphasizes evaluating the reliability of the historical surface reconstruction. This methodology highlights the potential of historical aerial imagery to enhance active fault characterization and near-fault morphotectonic analyses in landscapes heavily modified by anthropogenic activity., [ES] El reconocimiento de formas del relieve y el análisis de la superficie son fundamentales en los estudios geomorfológicos y morfotectónicos. En particular, el estudio detallado de la expresión superficial de las fallas activas es esencial para su caracterización como fuentes sísmicas en modelos de peligrosidad sísmica basados en fallas. Sin embargo, la creciente acción antropogénica ha alterado de manera profunda el paisaje natural, degradando o eliminando las formas tectónicas y limitando la caracterización precisa de las fallas activas en muchas regiones del mundo. Un ejemplo paradigmático lo constituye el sureste de la Península Ibérica, donde el intenso desarrollo agrícola de las últimas décadas ha transformado completamente el paisaje natural. Para abordar esta limitación, se han generado tres modelos digitales de superficie (MDS) históricos mediante fotogrametría a partir de imágenes aéreas históricas en dos fallas activas de la Cordillera Bética: las fallas de Palomares y del Llano del Águila. Se elaboraron dos MDS para la Falla de Palomares, uno a partir del vuelo americano serie B, 1956–1957, y otro del Vuelo Interministerial, 1973–1986), y un MDS para la Falla del Llano del Águila a partir del Vuelo Interministerial, todos con una resolución espacial de 2 × 2 m. Se introduce la rugosidad superficial como una nueva métrica diagnóstica para evaluar la calidad de los modelos e identificar artefactos, mientras que los análisis de diferencias entre modelos digitales de elevación (MDE) se utilizaron para cuantificar los cambios de elevación y evaluar la consistencia de las superficies reconstruidas. En lugar de centrarse únicamente en la precisión absoluta de la geolocalización, el enfoque propuesto pone el énfasis en la evaluación de la fiabilidad de la reconstrucción de la superficie histórica. Esta metodología pone de relieve el potencial de las imágenes aéreas históricas para mejorar la caracterización de fallas activas y los análisis morfotectónicos en las proximidades de las fallas en paisajes fuertemente modificados por la actividad antropogénica., [CAT] El reconeixement de les formes del relleu i l’anàlisi de la superfície terrestre són elements clau en els estudis geomorfològics i morfotectònics. En particular, l’estudi detallat de l’expressió superficial de les falles actives és essencial per caracteritzar-les com a generadores de sismicitat dins dels models d’avaluació de perillositat sísmica. Tanmateix, l’augment de l’activitat antropogènica ha alterat profundament el paisatge natural, degradant o esborrant les formes tectòniques i limitant la caracterització acurada de les falles actives en moltes regions del món. Un exemple paradigmàtic és el sud-est de la Península Ibèrica, on l’intens desenvolupament agrícola de les darreres dècades ha transformat completament el paisatge natural. Per afrontar aquesta limitació, hem generat tres models digitals de superfície (MDS) històrics mitjançant fotogrametria d’imatges aèries històriques en dues falles actives de la Serralada Bètica: les falles de Palomares i del Llano del Águila. Hem generat dos MDS per a la Falla de Palomares, un a partir del vol americà sèrie B, 1956–1957, i un del vol interministerial, 1973–1986, i un MDS per a la Falla del Llano del Águila a partir del vol interministerial, tots amb una resolució espacial de 2 × 2 m. Hem introduït la rugositat superficial com una nova mètrica diagnòstica per avaluar la qualitat dels models i identificar-hi els artefactes, mentre que l’anàlisi del model digital de elevacions obtingut de les diferències entre models digitals del terreny s’han utilitzat per quantificar els canvis d’elevació i avaluar la consistència de les superfícies reconstruïdes. En comptes de centrar-nos exclusivament en la precisió absoluta de la geolocalització, el nostre enfocament posa l’èmfasi en l’avaluació de la fiabilitat de la reconstrucció de la superfície històrica. Aquesta metodologia mostra el potencial de les imatges aèries històriques per millorar la caracterització de falles actives i les anàlisis morfotectòniques prop de les falles en paisatges fortament modificats per l’activitat humana., This research has the financial support of Project NSOURCES, grant PID2020-119772RB-I00 funded by MCIN/AEI/10.13039/501100011033. It was conducted in the frame of the predoctoral grant of Júlia Molins-Vigatà (PRE2021-097203) funded by MICIU/AEI/10.13039/501100011033., Peer reviewed
UPCommons. Portal del coneixement obert de la UPC
Publication Artículo científico (JournalArticle)

Digital surface models derived from historical aerial imagery in highly anthropized areas applied to active fault studies (eastern Betics, Spain)

  • Molins Vigetà, Júlia|||0000-0001-5428-3139
  • Blanch Gorriz, Xabier|||0000-0003-2694-4475
  • Martín Banda, Raquel
  • Garcia Sellés, David
  • Gómez Novell, Octavi
  • García Mayordomo, Julián
  • Insua Arévalo, Juan Miguel
  • Ortuño, Maria
Landform recognition and surface analysis are critical in geomorphological and morphotectonic studies. In particular, the detailed study of the surface expression of active faults is essential for their characterization as seismic sources in fault-based seismic hazard models. However, increasing anthropogenic action has profoundly altered the natural landscape, degrading or erasing tectonic landforms, and limiting the accurate characterization of active faults in many regions worldwide. A paradigmatic example is the southeastern Iberian Peninsula, where extensive agricultural development over last decades has completely transformed the natural landscape. To address this limitation, we produced three historical Digital Surface Models (DSMs) using historical aerial imagery across two active faults in the Betic Cordillera: the Palomares and Llano del Águila faults. Two DSMs were generated for the Palomares Fault (one from the American B-series Flight, 1956–1957, and one from the Interministerial Flight, 1973–1986), and one DSM was generated for the Llano del Águila Fault from the Interministerial Flight, all with a spatial resolution of 2 × 2 m. We introduce Surface Roughness as a new diagnostic metric to assess quality and to identify model artifacts, while DEM of Difference analyses were used to quantify elevation changes and assess the consistency of the reconstructed surfaces. Rather than focusing solely on absolute geolocation accuracy, our approach emphasizes evaluating the reliability of the historical surface reconstruction. This methodology highlights the potential of historical aerial imagery to enhance active fault characterization and near-fault morphotectonic analyses in landscapes heavily modified by anthropogenic activity., Peer Reviewed