Skip to main content

CIRCULARIDAD Y DESCARBONIZACION DEL CEMENTO Y PRODUCTOS DERIVADOS INVESTIGANDO TECNICAS AVANZADAS DE CABONATACION DE RESIDUOS ALCALINOS (SIDECAR)

PID2021-122390OB-C21

•
Funding agency name Agencia Estatal de Investigación
Funding agency acronym AEI
Program Programa Estatal para Impulsar la Investigación Científico-Técnica y su Transferencia
Subprogram Subprograma Estatal de Generación de Conocimiento
Call Proyectos de I+D+i (Generación de Conocimiento y Retos Investigación)
Call year 2021
State Plan 2021-2023 Plan Estatal de Investigación Científica y Técnica y de Innovación
Beneficiary centre AGENCIA ESTATAL CONSEJO SUPERIOR DE INVESTIGACIONES CIENTIFICAS (CSIC)

Resultados relacionados

Resultados totales (Incluyendo duplicados): 8
Encontrada(s) 1 página(s)

DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Physical and Mechanical Behavior of New Ternary and Hybrid Eco-Cements Made from Construction and Demolition Waste

  • Frías, Moisés
  • Monasterio, Manuel
  • Moreno-Juez, Jaime
Construction and demolition waste (CDW) currently constitutes a waste stream with growing potential use as a secondary raw material in the manufacture of eco-cements that offer smaller carbon footprints and less clinker content than conventional cements. This study analyzes the physical and mechanical properties of two different cement types, ordinary Portland cement (OPC) and calcium sulfoaluminate (CSA) cement, and the synergy between them. These cements are manufactured with different types of CDW (fine fractions of concrete, glass and gypsum) and are intended for new technological applications in the construction sector. This paper addresses the chemical, physical, and mineralogical characterization of the starting materials, as well as the physical (water demand, setting time, soundness, water absorption by capillary action, heat of hydration, and microporosity) and mechanical behavior of the 11 cements selected, including the two reference cements (OPC and commercial CSA). From the analyses obtained, it should be noted that the addition of CDW to the cement matrix does not modify the amount of water by capillarity with respect to OPC cement, except for Labo CSA cement which increases by 15.7%, the calorimetric behavior of the mortars is different depending on the type of ternary and hybrid cement, and the mechanical resistance of the analysed mortars decreases. The results obtained show the favorable behavior of the ternary and hybrid cements made with this CDW. Despite the variations observed in the different types of cement, they all comply with the current standards applicable to commercial cements and open up a new opportunity to improve sustainability in the construction sector., This research was funded by the Spanish Ministry of Science, Innovation and Universities (MICIU), the Spanish National Research Agency (AEI) and the European Regional Development Fund (ERDF), Ref.: RTI2018-097074-B-C21/C22 (CUCEM 3D) and PID2021-122390OB-C21 (CIDECAR)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Advances in the understanding of alkaline waste materials as potential eco-pozzolans: Characterisation, reactivityand behaviour

  • Frías, Moisés
  • Moreno de los Reyes, A.M.
  • Vigil de la Villa, R.
  • García, Rosario
  • Martínez-Ramírez, S.
  • Moreno, Jaime
  • Oleaga, Asier
21 pags., 15 figs., 12 tabs., This paper explores the potential of three industrial alkaline waste materials ¿ concrete construction and demolition waste (CDW-C), white ladle furnace slag (LFS) and biomass ash (BA) ¿ for use as secondary raw materials in the manufacture of future eco-cements with a reduced carbon footprint. Circularity is one of the key strategies behind the circular economy, the cement industry roadmap and the climate neutrality targets set for 2050. The three materials were characterised using various instrumental techniques (XRF, laser, BET, XRD¿Rietveld, SEM/EDX, FTIR, TG/DTA and NMR) and their chemical reactivity, the changes in their mineralogical phases and the thermodynamic stability within the pozzolan/lime system were determined. Finally, their physical and mechanical behaviour in binary cement pastes at replacement proportions of 7 % and 20 % over 90 days of curing were analysed. The results obtained show that these alkaline waste materials are different in nature and composition to standard pozzolans, with the LFS containing fluorine and the BA containing sulphates, potash and chlorides. The standard combined water test showed different levels of chemical reactivity (BA > LFS > CDW-C). Analysis of the materials¿ composition, mineralogical phases and thermodynamic stability over 90 days of reaction in the pozzolan/Ca(OH)2 system revealed that hydrogarnet was the stable phase in the LFS cement paste, while in the BA and CDW-C pastes ettringite and CSH and C-(A)-SH gels, among others, were the stable phases. All the blended cement pastes with 7 % and 20 % replacement content met the physical requirements and maintained the strength category of the starting cement., This research was funded by the Spanish Ministry of Science and Innovation (MICINN), the Spanish National Research Agency (AEI) and the European Regional Development Fund (ERDF), Ref.: PID2021-122390OB-C21 (CIDECAR). Additional information : Grant PID2021-122390OB-C21 (CIDECAR) funded by MICIU/AEI/10.13039/501100011033 and, ERDF/ EU.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Scientific advances regarding the effect of carbonated alkaline waste materials on pozzolanic reactivity

  • Frías, Moisés
  • Moreno de los Reyes, A.M.
  • Vigil de la Villa, Raquel
  • García, Rosario
  • Villar-Cociña, Ernesto
  • Vegas, Iñigo
  • Oleaga, Asier
Using alkaline waste materials as biomass ash (BA), Recycled Concrete Fines (RCF) from constructions and demolition waste (CDW) and ladle furnace slags (LFS), as CO2 massive sinks worldwide through the generation of new potential SCM by Accelerated Carbonation Technologies to reduce the cement industry’s carbon footprint is increasingly attracting attention for its environmental benefits and the materials’ improved performance in blended cement matrices. This paper employs characterization and identification techniques (XRF, XRD–Rietveld, SEM/EDX, BET, TG/DTG, FTIR, NMR) to analyse the effect of accelerated carbonation of white ladle furnace slag, siliceous construction and demolition waste and biomass ash on those materials’ physical and mineralogical properties, their chemical reactivity and their pozzolan/lime systems’ mineralogical phases. The results show that although behaviour differs depending on the carbonated waste materials’ alkalinity, all three present notable increases in BET surface area (7–17.5 m2/g) and substantially altered potentially carbonatable mineralogical phases (e.g. portlandite, Ca-olivine, periclase, hydrated cement phases), which mostly transition towards calcite, due to the CO2 uptake. Thermodynamic modelling of the pozzolanic reaction indicates that CSH/C(A)SH) gels are the most stable phases, followed by ettringite, C4AH13 and C4AcH12., This research was funded by the Spanish Ministry of Science and Innovation (MICINN), the Spanish National Research Agency (AEI) and the European Regional Development Fund (ERDF), Ref.: PID2021-122390OB-C21 (CIDECAR), Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Valorization of Fine-Fraction CDW in Binary Pozzolanic CDW/Bamboo Leaf Ash Mixtures for the Elaboration of NewTernary Low-Carbon Cement

  • Villar, J.
  • Villar-Cociña, Ernesto
  • Savastano, Holmer
  • Frías, Moisés
This paper presents the characterization of a binary mixture of construction and demolition waste (CDW) and bamboo leaf ash (BLAsh) calcined at 600 °C (novel mixture) and the study of its pozzolanic behavior. Different dosages in a pozzolan/Ca(OH)2 system were employed. The aim is the valorization of fine-fraction CDW that achieves a more reactive binary mixture and allows an adequate use of CDW as waste, as CDW is a material of limited use due to its low pozzolanic activity. The pozzolanic behavior of the mixture was analyzed using the conductometric method, which measures the electrical conductivity in the CDW + BLAsh/CH solution versus reaction time. With the application of a kinetic¿diffusive mathematical model, the kinetic parameters of the pozzolanic reaction were quantified. This allowed a quantitative evaluation of the pozzolanic activity based on the values of these parameters. To validate these results, other experimental techniques were used:X-ray diffraction, thermogravimetry and scanning electron microscopy. Also, mechanical compressive strength assays were carried out. The results show an increase in the pozzolanic activity of binary mixes of CDW + BLAsh for all the dosages used in comparison to the pozzolanic activity of CDW alone. The quantitative assessment (kinetic parameters) shows that the binary mixture CDW50 + BLAsh50 is the most reactive (reaction rate constant of 7.88 × 10¿1 h¿1) and is superior to the mixtures CDW60 + BLAsh40 and CDW70 + BLAs30. Compressive strength tests show higher strength values for the ternary mixes (OPC + CDW + BLAsh) compared to the binary mixes (OPC + CDW). In view of the results, the binary blend of pozzolans CDW + BLAsh is suitable for the manufacture of future low-carbon ternary cements., This research was funded by FAPESP (process No. 2022/11967-9), CAPES, Coordination for the Improvement of Higher Education Personnel-Brazil-Finance Code 001, CPG/FZEA selective process 03/2022, CNPq (Brazil) (401704/2013-0 and 306386/2013-5). The authors also gratefully acknowledge the Framework Collaboration Agreement between the IETcc-CSIC and the University of Sao Paulo (BDC20195702) and thank the Spanish Ministry of Science and Innovation, the Spanish National Research Agency (AEI) and the European Regional Development Fund (ERDF), Ref. PID2021-122390OB-C21 (CIDECAR). The APC was funded by the authors., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

New insights into the effect of carbonated waste materials on the properties of low-carbon cement pastes

  • Moreno de los Reyes, A.M.
  • Frías, Moisés
  • Vigil, R.
  • García, R.
  • Moreno-Juez, Jaime
  • Oleaga, Asier
This paper presents the analysis of the influence of previously carbonated alkaline waste materials when employed as pozzolanic additions in eco-cement pastes made with 7 % and 20 % replacement content, one of the cement industry's priority lines of action in its drive to achieve climate neutrality by 2050. The studies conducted focus on three different waste materials: construction and demolition waste (CDW), white ladle furnace slag (LFS) and biomass ash (BA). These are subjected to accelerated carbonation in a static reactor at 100 % CO2 for 90 min. Solid moisture levels differ according to the nature of the waste material. The results show that CO2-induced mineralization of these waste materials increases their surface area and chemical reactivity, as demonstrated by calorimetric assay. The primary hydration phases identified in the hydrated pastes are CSH gels, C4AH13 and C4AcH12. Furthermore, when compared with the same pastes without carbonated content, the carbonated waste materials present greater compressive strength and greater pore structure refinement. These findings confirm the viability of using this emerging technology to improve cement sector sustainability., This research was supported by the following funding sources: PID2021-122390OB-C21/CIDECAR., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Assessment of CO2 effects on the durability of blended cement eco-mortars containing alkaline waste with different carbonation conditions

  • Moreno de los Reyes, A.M.
  • Paredes, María Victoria
  • Guerrero Bustos, Ana María
  • Sánchez-Montero, Javier
  • Torres Martín, Julio Emilio
  • Frías, Moisés
In exploring ways of achieving climate neutrality by 2050, the cement industry is trialling carbonation of alkaline waste materials for use as supplementary cementitious materials in low-carbon eco-cement manufacture. This paper analyses the durability of mortars with 7 % and 20 % cement replacement by carbonated wastes (CLFS, CBA, CCDW-C) were tested under natural and accelerated carbonation. The mortars were prepared and water-cured for 28 d, then conditioned for carbonation testing in natural and accelerated (3 %) environments. The results show that in mortars containing carbonated waste, natural carbonation depths in outdoor and indoor environments reached 1.5 mm after 90 d, lower than in OPC mortar. Deconvoluted FTIR analyses identified bands (1300–900 cm−1) corresponding to Si–O bonds in the C-S-H gel and the SiO2-rich gel generated by C-S-H gel decalcification. Under accelerated carbonation, carbonation depths reached 12.3 mm after 70 d. 100-year projection indicates that mortars containing carbonated alkaline waste meet the durability criteria necessary to prevent steel reinforcement depassivation. The findings confirm that prior carbonation makes these materials’ use as SCMs viable since they offer greater reactivity and stability than their non-carbonated counterparts and equal or superior chemical resistance to CO2., This research was supported by Spanish national project PID2021-122390OB-C21 /CIDECAR financed by the MICIU/ AEI /10.13039/501100011033 and the ERDF / EU and the pre-doctoral contract referenced as PRE2022-105386 (10.13039/501100011033). This work was (partially) supported by Programa Iberoamericano de Ciencia y Tecnolog\u00EDa para el Desarrollo ( CYTED ) (through Red RINCIMCI \u2013 324RT0154)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Effective dose from external radiation and 222Rn exhalation of construction materials manufactured with carbonated alkaline waste materials

  • Suárez Navarro, José Antonio
  • Moreno de los Reyes, A.M.
  • Expósito-Suárez, Víctor Manuel
  • Guerrero Bustos, Ana María
  • Frías, Moisés
  • Hernáiz, Guillermo
  • Benavente, José Francisco
The use of alkaline waste in construction enables dual CO2 removal, both through carbonation processes employed to enhance their properties as construction materials and by substituting them in cement production. However, despite their environmental benefits and demonstrated properties such as strength, water absorption, chemical reactivity, porosity, etc., these materials may contain natural radionuclides at elevated activity concentrations. Therefore, it is necessary to analyse these materials to ensure their safety from a radiological protection perspective for humans and the environment. The alkaline supplementary cementitious materials (SCMs) studied were a white steel slag (LFS), a biomass ash (BA), and a siliceous construction and demolition waste (CDW). This study presents the radiological characterisation via gamma spectrometry of the individual materials, hardened cement pastes fabricated with 80% ordinary Portland cement (OPC) and 20% of these alkaline SCMs, and ground hardened pastes. The alkaline residue BA exhibited high concentrations of 210Pb and 40K (around 5000 Bq kg−1), both with and without accelerated carbonation. However, the absorbed dose rates from external radiation of the final construction materials were lower than the natural background radiation level of 84 nGy h−1. On the other hand, the emanation and exhalation rates of 222Rn, both in the individual materials and in the cement pastes containing 20% of the SCMs, were equivalent to those obtained with OPC cement., Open Access funding provided thanks to the CRUE-CSIC agreement with Springer Nature. This work is supported by the MICIU/AEI/https://doi.org/10.13039/501100011033 and the ERDF/ EU to finance the Spanish National project PID2021-122390OB-C21/ CIDECAR., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Analysis and Comparison of CO2 Emission Mitigation Measures by the Cement Industry in Ibero-American Countries

  • Chaves, Jéssica Fall Nogueira
  • de Paula Vasques, Lucas
  • da Silva Rêgo, João Henrique
  • Sanjuán, Miguel Ángel
  • Flores, Elena
  • de Brito, Jorge
  • Tobón, Jorge I.
  • Irassar, Edgardo Fabian
  • Gonzalez, Viviana Letelier
  • Savastano Jr., Holmer
  • Frías, Moisés
  • Gálvez Ruiz, Jaime C.
  • Pacheco, João
According to Global Cement and Concrete Association (GCCA), the cement industry is responsible for about 7–8% of all anthropogenic CO2 emissions released into the atmosphere as reported by GCCA et al. (CCUS in the Indian Cement Industry: A Review of CO2 Hubs and Storage Facilities, 2024). Clinker production results in high energy costs and the release of CO2 due to the calcination or decarbonation of its main raw material, limestone. In addition, energy is consumed to heat and maintain the temperature inside the rotary kiln, involving another significant CO2 release. This work presents a review of mitigation processes in seven Ibero-American countries (Argentina, Brazil, Chile, Colombia, Peru, Portugal and Spain) that guide the cement industry toward carbon-neutral production by 2030 and 2050. The mitigation parameters are analysed based on the global roadmap published by GCCA (Global Cement and Concrete Association), FICEM (Inter-American Cement Federation) and CEMBUREAU (European Cement Association), as well as the national roadmaps. The six main parameters identified across the countries’ roadmaps were the reduction of total direct CO2 emissions in cement production, thermal efficiency, electrical efficiency, the clinker factor, the use of alternative fuels and (re)carbonation. The adoption of biomass as an alternative fuel and the reduction of the clinker factor through the use of SCM were identified as the main strategies for lowering CO2 emissions from Portland cement production in all seven countries analysed. Despite current efforts, CO2 mitigation in the cement industry has limits. Achieving carbon neutrality by 2050 will require substantial investment in CO2 capture, storage and utilization technologies., The authors gratefully acknowledge Ibero-American Program of Science and Technology for Development (CYTED) project code 324RT0154. This study was partially funded by the Coordination for the Improvement of Higher Education Personnel (CAPES)—Financial Code 001, National Council for Sci entific, Technological Development (CNPq), Federal District Research Support Foundation (FAPDF), Dean’s Office of Graduate Studies (DPG) of the University of Brasília, Brazil and Institute for Innovation in Eco-Efficient Cementitious Materials for Construction Decarbonization (IMCEDC) and by the financial support of the Dean of Research and Innovation (DPI), Central Library of the University of Brasília, under Notice No. 001/2026. Jorge de Brito is grateful to the Portuguese Foundation for Science and Technology’s support through funding UIDB/04625/2020 from the research unit CERIS. M. Frías thanks the Spanish National project PID2021-122390OB-C21/CIDECAR financed by the MICIU/AEI/https:// doi. org/ 10. 13039/ 50110 00110 33 and the ERDF/EU., Peer reviewed