Skip to main content

MODELOS NUMERICOS DE ALTA PRECISION PARA EL DESARROLLO DE UNA NUEVA GENERACION DE PARQUES OFFSHORE DE ENERGIA RENOVABLE

PID2021-125447OB-I00

•
Funding agency name Agencia Estatal de Investigación
Funding agency acronym AEI
Program Programa Estatal para Impulsar la Investigación Científico-Técnica y su Transferencia
Subprogram Subprograma Estatal de Generación de Conocimiento
Call Proyectos de I+D+i (Generación de Conocimiento y Retos Investigación)
Call year 2021
State Plan 2021-2023 Plan Estatal de Investigación Científica y Técnica y de Innovación
Beneficiary centre UNIVERSIDADE DA CORUÑA

Resultados relacionados

Resultados totales (Incluyendo duplicados): 19
Encontrada(s) 1 página(s)

RUC. Repositorio da Universidade da Coruña
Publication Artículo científico (JournalArticle)

A very fast high-order flux reconstruction for Finite Volume schemes for Computational Aeroacoustics

  • Ramírez, Luis
  • Fernández-Fidalgo, Javier
  • París, José
  • Deligant, Michaël
  • Khelladi, Sofiane
  • Nogueira, Xesús
Financiado para publicación en acceso aberto: Universidade da Coruña/CISUG, [Abstract:] Given the small wavelengths and wide range of frequencies of the acoustic waves involved in Aeroacoustics problems, the use of very accurate, low-dissipative numerical schemes is the only valid option to accurately capture these phenomena. However, as the order of the scheme increases, the computational time also increases. In this work, we propose a new high-order flux reconstruction in the framework of finite volume (FV) schemes for linear problems. In particular, it is applied to solve the Linearized Euler Equations, which are widely used in the field of Computational Aeroacoustics. This new reconstruction is very efficient and well suited in the context of very high-order FV schemes, where the computation of high-order flux integrals are needed at cell edges/faces. Different benchmark test cases are carried out to analyze the accuracy and the efficiency of the proposed flux reconstruction. The proposed methodology preserves the accuracy while the computational time relatively reduces drastically as the order increases., L. Ramírez and X. Nogueira acknowledge the support provided by the [Grant PID2021-125447OB-I00] funded by MCIN/AEI/ 10.13039/501100011033 and by “ERDF A way of making Europe”, and the funds by [Grant TED2021-129805B-I00] funded by MCIN/AEI/ 10.13039/501100011033 and by the “European Union NextGenerationEU/PRTR”. They also acknowledge the funding provided by the Xunta de Galicia (Grant #ED431C 2022/06)., Xunta de Galicia; ED431C 2022/06
RUC. Repositorio da Universidade da Coruña
Publication Artículo científico (JournalArticle)

A first order FEM-based formulation for the analysis of molecular structures with bonded interactions

  • Fernández San Miguel, Andrés
  • Ramírez, Luis
  • Couceiro, Iván
  • Navarrina, Fermín
[Abstract] In this paper we present a formulation, denoted as the Molecular Element Method, that allows, given a certain force field, the possibility of performing a first order analysis as is common in structural mechanics. The stiffness matrices have been obtained in an exact way, without the need to resort to any assumptions other than those used to define the force field. Obtaining these matrices analytically allows the exploitation of algorithms and techniques typical of finite elements, being able to perform both static and vibration mode analysis independently of the molecular geometry. In this aspect, the formulation has been validated by studying the frequencies and vibration modes of several molecules, comparing with both theoretical and experimental results. Values of the modulus of elasticity of both graphene sheets and carbon nanotubes have also been obtained in accordance with the values present in the literature. Finally, the formulation shows its potential allowing to obtain the flexural wave dispersion in nanotubes compared to results using Tersoff-Brenner potentials and non-local elasticity models., The authors acknowledge the support provided by the [Grant PID2021-125447OB-I00] funded by MCIN/AEI/ 10.13039/501100011033 and by “ERDF A way of making Europe”, and the funds by [Grant TED2021-129805B-I00] funded by MCIN/AEI/ 10.13039/501100011033 and by the “European Union NextGenerationEU/PRTR”. They also acknowledge the funding provided by the Xunta de Galicia (grant #ED431C 2022/06). Andrés Fernández-San Miguel also acknowledges the FPI grant PRE2022-102024 and the help provided by Strachan Group during his stay at Purdue University., Xunta de Galicia; ED431C 2022/06
RUC. Repositorio da Universidade da Coruña
Publication Artículo científico (JournalArticle)

Optimal Bounds and Practical Insights: Cantelli’s Inequality Revisited

  • Egozcue, Martin
  • Fuentes García, Luis
Versión aceptada de: https://doi.org/10.1007/s42519-024-00410-6, [Abstract:] In this paper, we establish three upper bounds of Cantelli’s inequality type, out of which two are optimal, improving upon previous results, including those derived from Cantelli’s and Hoeffding’s inequalities. We demonstrate the practical relevance of our research by analyzing exchange-rate risk in the real estate market. Specifically, we develop an effective hedging strategy that enables firms to safeguard their profits in the case of currency mismatches between revenue and costs. By effectively modeling the dependence structure of revenue and costs, we enhance the precision of our bounds, as demonstrated through simulation data., We would like to express our sincere gratitude to the Editor and the two anonymous referees for their insightful comments and constructive feedback, which have significantly improved the quality of this paper. The first author acknowledges financial support by Agencia Nacional de Innovación e Investigación (ANII). This work has been partially supported by the Grant PID2021-125447OB-I00 funded by MCIN/AEI/ 10.13039/501100011033 and by the Grant #ED431C2022/06 funded by Xunta de Galicia., Xunta de Galicia; ED431C2022/06
RUC. Repositorio da Universidade da Coruña
Publication Artículo científico (JournalArticle)

Optimizing Rank-Dependent Utility Theory Computations: Algorithm Analysis with Applications to Firm Hedging Strategies

  • Egozcue, Martin
  • Fuentes García, Luis
This version of the article has been accepted for publication, after peer review and is subject to Springer Nature’s AM terms of use (https://www.springernature.com/gp/open-research/policies/accepted-manuscript-terms), but is not the Version of Record and does not reflect post-acceptance improvements, or any corrections. The Version of Record is available online at: https://doi.org/10.1007/s10614-025-11084-y., [Abstract]: Rank-Dependent Utility Theory (RDU) provides a comprehensive alternative to Expected Utility Theory (EUT) for modeling decision-making under uncertainty. By incorporating probability weighting, RDU captures observed behavioral patterns that EUT fails to explain, offering both theoretical enhancements and empirical support. Despite its strengths, the practical application of RDU is often hindered by the complexity involved in calculating its functional values, making it less accessible for routine decision analysis. The primary challenge arises from the fact that, according to this theory, outcomes must be arranged by their magnitude, and each outcome’s weight is determined by the difference of a probability weighting function (pwf). This inherent structure makes calculating RDU values complex, even for relatively simple discrete random variables. This paper has two main objectives. First, it addresses gaps in the literature on RDU value computation and time complexity. While methods for calculating RDU exist, comprehensive algorithms and optimization techniques are lacking. We analyze the time complexity of various approaches and provide Python and R code for RDU computations and parameter optimization. Although closed-form solutions are generally unavailable for RDU, they are achievable for Yaari’s Dual Theory (DUT), a special case of RDU, using a proposed alternative algorithm. Second, we apply our findings to a practical case study, examining optimal hedging strategies for a real estate firm facing currency mismatches between revenue and costs. By considering decision-makers with varying psychological traits, such as optimism and pessimism, we explore how these traits influence the optimal hedging strategy and use sensitivity analysis to assess their impact., This work has been partially supported by the Grant PID2021-125447OB-I00 funded by MCIN/AEI/ 10.13039/501100011033.
RUC. Repositorio da Universidade da Coruña
Publication Artículo científico (JournalArticle)

Topology Optimization of Structures with Stress, Buckling and Dynamic Behaviour Constraints

  • Rey Furelos, Martín
  • Couceiro, Iván
  • París, José
  • Ramírez, Luis
  • Navarrina, Fermín
[Abstract] We can define topological optimization of structures as the branch of computational mechanics that seeks to obtain optimal material layouts in a given domain under specific boundary conditions. This discipline, pioneered by Bendsøe and Kikuchi in the late 1980s, is becoming increasingly relevant due to its direct application in various sections of applied physics such as civil, mechanical and aeronautical engineering. In recent years, the advancements in computational capacity have enabled a significant leap in the topological optimization of structures. This work aims, first, to systematize and compile the current knowledge surrounding the behaviour of structural models with intrinsic relative densities used in the SIMP method, in order to design solutions to the various physical and numerical challenges arising from the use of Galerkin interpolation methods (FEM, IGA, etc.) for solving elasticity equations with relative density. Specifically, we will attempt to address the problems arising from topological optimization processes in which dynamic structural analysis or second-order theory plays a fundamental role. Ultimately, the main objective of this work is to design topological optimization formulations for structures of isotropic materials using the SIMP method integrating advanced constraints and combining them in a way that accounts for an increasing number of physical phenomena, thereby reducing the structure’s weight to optimal level. The reduction in structural weight introduces the potential for instabilities, dynamic effects and nonlinearities, which will be addressed throughout the optimization process using well-known structural analysis techniques such as the calculation of natural vibration frequencies, linear buckling or full geometric nonlinearity., This research has been partially funded by strategic projects oriented towards the ecological transition and the digital transition of the Ministry of Science and Innovation: GREENHUGS (Grant #Ted2021-129991b-C31 and Grant #Ted2021-129991b-C32) and NEPTUNE (Grant #Ted2021-129805b-I00), by The Ministry of Science and Innovation: ATHENEA (Grant #Pid2021-125447ob-100) and TOPACIUS (Grant #Pid2023-146793ob-I00), by Department of Education and University Planning of The Xunta De Galicia (Grant #Ed431c 2022/06), and by The Group of Numerical Methods in Engineering of The Universidade Da Coruña., Xunta de Galicia; ED431C 2022/06
RUC. Repositorio da Universidade da Coruña
Publication Artículo científico (JournalArticle)

Data-driven Riemann solvers: A neural network approach and a hybrid solver

  • Nogueira, Xesús
  • Ramos, Lucía
  • Seijo Conchado, Sonia
  • Couceiro, Iván
  • Khelladi, Sofiane
  • Ramírez, Luis
[Abstract] The accurate and efficient numerical solution of the Riemann problem is the basis of Godunov-type schemes. Approximate Riemann solvers are widely used for their efficiency, although they exhibit inaccuracies and instabilities in challenging regimes such as strong rarefactions or near-vacuum conditions. This work explores the use of deep neural networks (NNs) to address these limitations. We present two distinct data-driven frameworks: first, a NN-based solver trained to predict the exact solution of the Riemann problem, and second, a high-performance hybrid scheme. The hybrid approach uses the standard Harten–Lax–van Leer-contact (HLLC) Riemann solver as the main solver, enhanced with a computationally inexpensive, physics-based detector that identifies interfaces where the HLLC solution is likely to be inaccurate or to fail. At these interfaces, the scheme selectively uses the pretrained NN to ensure a more accurate solution. Through a series of benchmark tests, we show that the NN solver accurately reproduces the exact solution of the Riemann problem, but at a significant computational cost. In contrast, the proposed hybrid solver achieves a comparable level of accuracy to the NN solver, while it requires nearly the same computational cost as the standard HLLC solver., X. Nogueira and L. Ramírez acknowledge the support provided by the [Grant PID2021- 125447OB-I00] funded by MCIN/AEI/ 10.13039/501100011033 and by “ERDF A way of making Europe” and the funds by [Grant TED2021-129805B-I00] funded by MCIN/AEI/ 10.13039/501100011033 and by the “European Union NextGenerationEU/PRTR”. L. Ram´ırez and I. Couceiro acknowledge the funds by MCIU/AEI [Grant PID2024-160181OB-I00]. They also acknowledge the funding provided by the Xunta de Galicia (grant #ED431C 2022/06). L. Ramos acknowledges the support from the Xunta de Galicia through (grant #ED431C 2024/33)., Xunta de Galicia; ED431C 2022/06, Xunta de Galicia; ED431C 2024/33
RUC. Repositorio da Universidade da Coruña
Publication Artículo científico (JournalArticle)

Pore-scale simulation of multiphase flows using equations of state that preserve the correct surface tension

  • Fernández-Fidalgo, Javier
  • Cueto-Felgueroso Landeira, Luis
  • Ramírez, Luis
  • Martínez, Abel
  • Nogueira, Xesús
[Abstract:] Surface tension plays a crucial role in determining the interfacial behavior between partially miscible fluid systems, and affects the overall dynamics of phase transition processes. Accurate modeling of surface tension is crucial for understanding and predicting various phase transition phenomena, such as capillary-driven flows, droplet formation, and interfacial dynamics. Cubic equations of state (EoS), such as the van der Waals (vdW) model, incorporate two corrective terms to account for intermolecular interactions. These terms improve the predictions of the equation of state at high pressures and low temperatures, where intermolecular forces become significant; however they also affect to the effective surface tension when the EoS is used in combination with diffuse-interface models of multiphase systems. The ability to capture the correct surface tension is essential in pore-scale models flow through permeable media, particularly in capillary-dominated flow regimes. For typical geological or industrial pore sizes the effective surface tension obtained using standard equations of state may be several orders of magnitude larger than the physical value, which greatly affects the accuracy and physical fidelity of the simulations. In this work we present a methodology that allows diffuse-interface numerical methods to reproduce the physical surface tension in pore-scale simulations of multiphase flow. The proposed methodology is applied to the simulation of interfacial processes at arbitrary length scales while honoring the physical surface tension driving capillary phenomena., J. Fernández-Fidalgo acknowledges the support provided by “Ayudas para la recualificación del sistema universitario español para 2021–2023. Modalidad Margarita Salas RSU.UDC.MS20” by the Ministerio de Universidades of the Spanish Government and European Union through the NextGenerationEU funds. L. Cueto-Felgueroso acknowledges the support provided by Spanish Agencia Estatal de Investigación and the Ministerio de Ciencia e Innovación (10.13039/501100011033) through grant HydroPore PID2019-106887GB-C33. L. Ramírez and X. Nogueira acknowledge the support provided by [Grant PID2021-125447OB-I00] funded by MCIN/AEI/ 10.13039/501100011033 and by “ERDF A way of making Europe”, and the funds by [Grant TED2021-129805B-I00] funded by MCIN/AEI/ 10.13039/501100011033 and by the “European Union NextGenerationEU/PRTR” . They also acknowledge the funding provided by the Xunta de Galicia (grant #ED431C 2022/06)., Ministerio de Universidades; RSU.UDC.MS20, Xunta de Galicia; ED431C 2022/06
RUC. Repositorio da Universidade da Coruña
Publication Artículo científico (JournalArticle)

Machine learning-based WENO5 scheme

  • Nogueira, Xesús
  • Fernández-Fidalgo, Javier
  • Ramos, Lucía
  • Couceiro, Iván
  • Ramírez, Luis
Financiado para publicación en acceso aberto: Universidade da Coruña/CISUG, [Abstract]: Machine learning (ML) is becoming a powerful tool in Computational Fluid Dynamics (CFD) to enhance the accuracy, efficiency, and automation of simulations. Currently, in the design of shock-capturing methods, there is still a heavy reliance on the expertise and scientific knowledge of each author, particularly in nonlinear components such as smoothness indicators and weighting functions. ML has the potential to reduce this dependency, since by leveraging large datasets, they can learn intricate patterns and make accurate predictions of these functions. In this work we present a neural network that compute the weighting functions in the WENO5 scheme. The proposed WENO5-NN scheme generalizes well for different resolutions, and in most of the cases tested, it outperforms the classical WENO5-JS scheme., X. Nogueira and L. Ramírez acknowledge the support provided by the [Grant PID2021-125447OB-I00] funded by MCIN/AEI/ 10.13039/501100011033 and by “ERDF A way of making Europe”, and the funds by [Grant TED2021-129805B-I00] funded by MCIN/AEI/ 10.13039/501100011033 and by the “European Union NextGenerationEU/PRTR”. They also acknowledge the funding provided by the Xunta de Galicia (grant #ED431C 2022/06)., Xunta de Galicia; ED431C 2022/06
RUC. Repositorio da Universidade da Coruña
Publication Artículo científico (JournalArticle)

Selecting Among Equivalent Options: A Superior Rule to Coin Tossing in Pairwise Comparisons

  • Egozcue, Martin
  • Fuentes García, Luis
This version of the article has been accepted for publication, after peer review and is subject to Springer Nature’s AM terms of use (https://www.springernature.com/gp/open-research/policies/accepted-manuscript-terms), but is not the Version of Record and does not reflect post-acceptance improvements, or any corrections. The Version of Record is available online at: https://doi.org/10.1007/s11238-025-10117-0 ., [Abstract]: In traditional decision-making, when faced with a choice between two seemingly equivalent options, a common approach is to resort to a random decision, such as a coin toss. However, this paper proposes deterministic rules that outperform such stochastic methods by achieving the same expected value while minimizing variance. Furthermore, we demonstrate numerically that, for a reasonable number of choices, our proposed rule second-order stochastically dominates the coin-tossing approach. Consequently, risk-averse decision-makers may prefer our deterministic method over traditional coin tossing., This work has been partially supported by the Grant PID2021–125447OB-I00 funded by MCIN/AEI/ 10.13039/501100011033.
RUC. Repositorio da Universidade da Coruña
Publication Artículo científico (JournalArticle)

Isogeometric topology optimization of structures using the overweight approach

  • Villalba Rama, Diego
  • París, José
  • Couceiro, Iván
  • Navarrina, Fermín
Financiado para publicación en acceso aberto: Universidade da Coruña/CISUG, [Abstract] In this paper, a 2D isogeometric formulation of the material distribution for structural topology optimization considering minimum weight and local stress constraints using the overweight approach is proposed. The aim of this isogeometric formulation is to provide solutions with high spatial definition using a lower number of design variables in comparison with the formulations previously developed to define the material layout. Despite of this, an important number of local stress constraints has to be considered in the solution of the problem. For this purpose, an Overweight Constraint is used to consider all of them. The structural analysis is performed by means of the Isogeometric Analysis (IGA) and the distribution of material is modeled by means of quadratic B-splines. Moreover, the optimization is addressed by means of the Sequential Linear Programming algorithm (SLP) that is driven by the information provided by a full first-order sensitivity analysis extension of the IGA formulation. Finally, the proposed formulation is tested by means of some benchmark problems, and the results show that the isogeometric formulation provides solutions with high spatial definition. A comparison with a Finite Element Method (FEM) topology optimization formulation is included., Open Access funding provided thanks to the CRUE-CSIC agreement with Springer Nature. This work has been partially supported by the “Xunta de Galicia (Secretaría Xeral de Universidades)” and the European Union (European Social Fund—ESF) through grant ED481A-2016/387, by the Spanish Government “(Ministerio de Universidades)” through “Margarita Salas grants for the training of new PhD-2022” [RSU.UDC.MS25], by Feder funds of the European Union to the Spanish Government (“Ministerio de Economía y Competitividad”) through grants DPI2015-68341-R and RTI2018-093366-B-I00, by the Spanish Government “(Ministerio de Ciencia e Innovación)” through “Knowledge generation projects” [PID2021-125447OB-I00] and through “Strategic projects oriented to the ecological and digital transition” of the “Plan de recuperación, transformación y resiliencia” [TED2021-129991B-C31] and [TED2021-129805B-100] with FEDER and EU Next-Generation funds, by the “Xunta de Galicia” (“Consellería de Educación, Universidade e Formación Profesional”) through grants GRC2014/039 and GRC2018/41, by the “Xunta de Galicia” “(Consellería de Cultura, Educación, Formación Profesional y Universidades)” through “Grants for the consolidation and structuring of competitive research units of the Galician University System: Competitive reference group” [ED431C 2022/06], and by research fellowships of the University of A Coruña and the “Fundación de la Ingeniería Civil de Galicia”., Xunta de Galicia; ED481A-2016/387, Xunta de Galicia; GRC2014/039, Xunta de Galicia; GRC2018/41, Xunta de Galicia; ED431C 2022/06
RUC. Repositorio da Universidade da Coruña
Publication Artículo científico (JournalArticle)

Very High Order Finite Volume Solver for Multi Component Two-Phase Flow with Phase Change Using a Posteriori Multi-Dimensional Optimal Order Detection

  • Deligant, Michaël
  • Romero-Casado, Carlos-Jesús
  • Nogueira, Xesús
  • Ramírez, Luis
  • Specklin, Mathieu
  • Bakir, Farid
  • Khelladi, Sofiane
[Abstract]: In this work we propose a very high-order compressible finite volume scheme with a posteriori stabilization for the computation of multi-component two-phase flow with phase change. It is based on finite volume approach using moving least squares (MLS) reproducing kernels for high order reconstruction of the Riemann states. Increased robustness is achieved by using the multi-dimensional optimal order detection (MOOD) method to get a high-accurate and low dissipation scheme while maintaining boundedness and preventing numerical oscillations at interfaces and strong gradient zones. The properties of the proposed framework are demonstrated on classical test problems starting with convergence order verification on simple scalar advection test cases. More complex shock and more stringent tube tests with various water, steam and air concentration are then simulated and compared with available references in the literature. Finally, the ability of the proposed approach to compute multi-component flows with phase change is illustrated with the simulation of a liquid oxygen jet in gaseous hydrogen., Xesús Nogueira and Luis Ramírez acknowledge the support provided by the [Grant PID2021-125447OB-I00] funded by MCIN/AEI/ 10.13039/501100011033 and by “ERDF A way of making Europe”, and the funds by [Grant TED2021-129805B-I00] funded by MCIN/AEI / 10.13039/501100011033 and by the “European Union NextGenerationEU/PRTR”. They also acknowledge the funding provided by the Xunta de Galicia, Spain (grant #ED431C 2022/06). LIFSE laboratory gratefully acknowledges the funding of the PhD work of Carlos-Jesús Romero-Casado from the Ariane Group and the Agence Nationale de la Recherche Technologique (ANRT-CIFRE N°2014/1493)., Xunta de Galicia; ED431C 2022/06, France. Agence Nationale de la Recherche Technologique; ANRT-CIFRE N°2014/1493
RUC. Repositorio da Universidade da Coruña
Publication Artículo científico (JournalArticle)

A Comparative Review of FEM Like Techniques Applied to the Linear Analysis of Molecular Structures

  • Fernández San Miguel, Andrés
  • Ramírez, Luis
  • Couceiro, Iván
  • Navarrina, Fermín
Financiado para publicación en acceso aberto: Universidade da Coruña/CISUG, [Abstract] In this study, a historical review of the Finite Element Method (FEM) and Molecular Dynamics (MD), widely used at the macro and nanoscale respectively is presented, emphasizing the actual parallelisms between their development and applications. After this historical introduction, where certain similarities between both methods are pointed out, different FEM-like methods are analyzed and compared as for first order analysis of structures at the nanoscale. Firstly, the Structural Mechanics (SM) approach is analyzed, where it is assumed that the use of Euler Bernoulli beam elements is equivalent to working directly from the force field. On the other hand, the Molecular Element Method (MEM), which provides the stiffness matrices directly from the potentials, is analyzed. Several analytical static cases are studied for the validation and comparison of both methods. Finally, it is shown that, other branch of methods such as Elastic Network Models (ENM) can be viewed as a particular sub-case of the MEM, or as truss-type finite elements. As an example, the analysis of SARS-CoV2 spikes vibrations is included, comparing with both experimental results and continuous models., The authors acknowledge the support provided by the [Grant PID2021-125447OB-I00] funded by MCIN/AEI/ 10.13039/501100011033 and by “ERDF A way of making Europe”, and the funds by [Grant TED2021-129805B-I00] funded by MCIN/AEI/ 10.13039/501100011033 and by the “European Union NextGenerationEU/PRTR”. They also acknowledge the funding provided by the Xunta de Galicia (grant ED431C 2022/06) and the project "Virionbreak" funded by the Instituto de Salud Carlos III. Andrés Fernández-San Miguel also acknowledges the FPI grant PRE2022-102024 and the help provided by Strachan Group during his stay at Purdue University. Funding for open access charge: Universidade da Coruña/CISUG., Xunta de Galicia; ED431C 2022/06
RUC. Repositorio da Universidade da Coruña
Publication Artículo científico (JournalArticle)

Structural Optimization and Comparison Study of Different Configurations of Offshore Wind Turbine Jacket Substructures

  • Fernández Rodríguez, Noelia
  • Couceiro, Iván
  • Nogueira, Xesús
  • Colominas, Ignasi
Financiado para publicación en acceso aberto: Universidade da Coruña/CISUG, [Abstract] In this work, the design of a three-legged jacket is presented, taking into account the susceptibility to the directionality of the loads in comparison with a four-legged jacket. For this purpose, two jackets with different orientations with respect to the incoming environmental loads were modelled: the G30, which has two legs facing the main incoming environmental actions, and the G90 jacket, which only has one. In addition, mathematical optimization is proposed to minimize the weight of the structure using a combination of size and shape optimization techniques. The solution to the proposed optimization problem is based on the application of sequential linear programming, which is then solved using the simplex method. In this study, a first-order sensitivity analysis was reformulated to extend its applicability to a three-legged configuration. This sensitivity analysis provides the derivatives of the coordinates of the structure nodes with respect to the design variables required for the shape optimization. The proposed formulation allows optimized designs with a weight reduction of around 40% relative to the UpWind jacket. In the G30 jacket, there was an increase in fatigue damage from the cyclic loads. The G90 jacket and optimal four-legged jacket present design limitations conditioned by the effects of compression stresses and buckling. The differences between the G30 and G90 models highlight the sensitivity of the structural response to the directionality of the loads, which can constitute a limiting factor in the cost reduction of three-legged jackets. An interesting result of this research is that the added shape design variables for the jacket footprint allowed a significant improvement of the optimized designs., The authors gratefully acknowledge the support provided by the Grant PID2021-125447OB-I00 funded by MCIN/AEI/10.13039/501100011033 and by “ERDF A way of making Europe” and the funds by Grant TED2021-129805B-I00 funded by MCIN/AEI/10.13039/501100011033 and by the “European Union NextGenerationEU/PRTR.” They also acknowledge the funding provided by the Xunta de Galicia (Grant # ED431C 2022/06). Funding for open access charge: Universidade da Coruña/CISUG.
RUC. Repositorio da Universidade da Coruña
Publication Artículo científico (JournalArticle)

Multipatch IGA for stress-constrained minimum weight structural topology optimization

  • Villalba Rama, Diego
  • París, José
  • Couceiro, Iván
  • Navarrina, Fermín
This is an Accepted Manuscript of an article published by Taylor & Francis in Engineering Optimization published online: 24 Jan 2025 , available at: https://doi.org/10.1080/0305215X.2024.2436994., [Abstract]: In this article, an isogeometric analysis (IGA) formulation with various patches (multipatch approach) is proposed to solve the structural topology optimization (STO) problem. The multipatch formulation enables the solution of STO problems with geometries not equivalent to rectangles by using IGA. For this purpose, a minimum weight with stress constraints (MWSC) problem is stated. A quadratic B-splines basis defined for each patch is used to model the material distribution. The structural analysis is computed with IGA. The introduction of all of the stress constraints in the formulation of the problem is made with an overweight constraint (OC). Finally, the multipatch approach is validated with the solution of some benchmark problems., This work was partially supported by the Xunta de Galicia (Secretaría Xeral de Universidades) and the European Union (European Social Fund) through ‘Grants for Supporting the Predoctoral Stage in Universities of the Galician University System, in Research Public Organisms of Galicia and in Other Entities of the R&D system of the Galician Government–2016’ (ED481A-2016/387); by the Spanish Government (Ministerio de Universidades) through ‘Margarita Salas Grants for the Training of New PhD–2022’ ([)RSU.UDC.MS25); by the Spanish Government (Ministerio de Ciencia e Innovación) through ‘Knowledge Generation Projects’ (PID2021-125447OB-I00) and through ‘Strategic Projects Oriented to the Ecological and Digital Transition’ of the Plan de recuperación, transformación y resiliencia (TED2021-129991B-C31 and TED2021-129805B-100) with FEDER and EU Next Generation funds by the Xunta de Galicia (Consellería de Cultura, Educación, Formación Profesional y Universidades) through ‘Grants for the Consolidation and Structuring of Competitive Research Units of the Galician University System: Competitive Reference Group’ (ED431C 2022/06); and by research fellowships of the University of A Coruña and the Fundación de la Ingeniería Civil de Galicia.
RUC. Repositorio da Universidade da Coruña
Publication Artículo científico (JournalArticle)

Optimizing hedonic editing for multiple outcomes: an algorithm

  • Egozcue, Martin
  • Fuentes García, Luis
Versión aceptada de: https://doi.org/10.1007/s10287-024-00521-2, [Abstract:] We study hedonic editing principles that aim to find individuals’ maximum utility when confronted with multiple outcomes Thaler (Mark Sci 4:199–214, 1985). These principles have been primarily defined and studied for only two outcomes. However, when dealing with more than two outcomes, the principles become more ambiguous, and some of them may not continue to be valid. To address this, we present an algorithm designed to find the best solution over a partition set of a given vector of n outcomes. We demonstrate that this algorithm identifies the best-majorized vector for up to four outcomes and establish the conditions under which this vector is optimal for n outcomes. Our algorithm is fast since it requires at most n−1 steps. We provide a detailed analysis of the algorithm’s performance, characterizing the conditions that guarantee the optimal solution and identifying cases where the algorithm may not converge to the optimal solution. Nevertheless, in these cases, we demonstrate through numerical analysis that it can find the optimal solution with a high accuracy rate in most ’practical’ instances, making it a reliable tool for solving hedonic editing problems., We express our gratitude to the Editor and an anonymous referee for their constructive comments, which significantly enhanced this paper. The first author acknowledges financial support from the Agencia Nacional de Innovación e Investigación (ANII). The topic for this paper was initially inspired by Juan Dubra during informal discussions. This work has been partially supported by the Grant PID2021-125447OB-I00 funded by MCIN/AEI/10.13039/501100011033
RUC. Repositorio da Universidade da Coruña
Publication Artículo científico (JournalArticle)

Arbitrary-Order Unstructured Finite-Volume Methods for Implicit Large Eddy Simulation of Turbulent Flows with Adaptive Dissipation/Dispersion Adjustment (ADDA)

  • Tsoutsanis, Panagiotis
  • Nogueira, Xesús
Data relating to the results in this manuscript are available at the Cranfield Online Research Data Repository https://doi.org/10.57996/cran.ceres-2638., [Abstract]: Implicit Large Eddy simulation (iLES) has gained substantial popularity for modelling high-Reynolds-number turbulent flows, found across several engineering and scientific fields. iLES on a first read represents a simple, computationally efficient, and straightforward way to model turbulent flows. The numerical dissipation/dispersion errors of high-resolution high-order numerical schemes employed in this context, can mimic the effects of the unresolved flow scales, and therefore acting like a subgrid-scale model, most often successfully. The numerical dissipation and dispersion of high-resolution methods are intertwined and controlling them to obtain physically meaningful results in under-resolved grid settings of compressible flows is challenging due to the presence of discontinuities and smooth flow features simultaneously. A numerical method should have the right amount of dissipation/dispersion, such that it can avoid the unphysical “build-up” of energy in the high modes or excessive diffusion, since this will render the method unsuitable for iLES. Several elegant approaches to master this delicate balance have been presented in the literature, including polynomial de-aliasing, Riemann solver dissipation adjustment, and adaptive blending of central and upwind schemes. This work presents an adaptive dissipation/dispersion adjustment (ADDA) algorithm that determines a well resolved and under-resolved region and adjusts the numerical dissipation/dispersion of a high-order CWENOZ scheme, followed by further adjusting the flux-dissipation term depending on the presence of discontinuities. Implemented within an arbitrary-order finite-volume framework for unstructured meshes in compressible flows, the ADDA algorithm is put to the test across a range of under-resolved iLES simulations encompassing subsonic, transonic, and supersonic regimes. The developed framework exhibits enhanced robustness and scale-resolving capabilities, all while achieving physically meaningful results in a computationally efficient manner. All the methods have been implemented and have been made available to the research community in the open-source UCNS3D CFD solver to accelerate the improvement of the methods., P.T. acknowledges the computing time on ARCHER2 through EPSRC UK Turbulence Consortium [EP/X035484/1] and the support provided by the EPSRC grant for “Adaptively Tuned High-Order Unstructured Finite-Volume Methods for Turbulent Flows” [EP/W037092/1]. X.N. acknowledges the support provided by the [Grant PID2021-125447OB-I00] funded by MCIN/AEI/ 10.13039/ 501100011033 and by “ERDF A way of making Europe”, the funds by [Grant TED2021-129805B-I00] funded by MCIN/AEI/10.13039/501100011033 and by the “European Union NextGenerationEU/PRTR”, and the funding provided by the Xunta de Galicia [Grant #ED431C 2022/06]., Xunta de Galicia; ED431C 2022/06, United Kingdom. Engineering and Physical Sciences Research Council; EP/W037092/1, United Kingdom. Engineering and Physical Sciences Research Council; EP/X035484/1, https://doi.org/10.57996/cran.ceres-2638
RUC. Repositorio da Universidade da Coruña
Publication Artículo científico (JournalArticle)

High thermal Rayleigh number with double-diffusive finger convection: Effect of nonlinear equation of state

  • Ouzani, Riadh
  • Khelladi, Sofiane
  • Nogueira, Xesús
©2024. This manuscript version is made available under the CC-BY-NC-ND 4.0 license https://creativecommons.org/licenses/by-nc-nd/4.0/(opens in new tab/window)  https://www.elsevier.com/about/policies-and-standards/sharing . This is an accepted version of the following published document: https://doi.org/10.1016/j.icheatmasstransfer.2024.107861, [Abstract] In this study, we numerically investigate the effects of the nonlinearity in the equation of state on the structure of fingers and the transport mechanisms of salt and heat in double-diffusive finger convection, utilizing the finite volume approach with high-accuracy schemes to solve the two-dimensional Navier–Stokes equations. Our system is characterized by a low buoyancy ratio and a high thermal Rayleigh number, with density variation modeled as quadratic in temperature and linear in salinity. Three cases of nonlinear parameters were examined: the linear case ( ε = 0), weak nonlinear case ( ε = 1), and highly nonlinear case ( ε = 3). It is shown that increasing the nonlinear parameter enhances the buoyancy force acting on descending fingers more than on ascending ones, resulting in narrower and faster-growing descending fingers. Conversely, ascending fingers are appreciably damped, growing more slowly but with greater width. This asymmetry in finger development gives rise to distinct convective patterns between the upper and lower layers, significantly influencing the formation of mixed layers. The mixing process was also examined by analyzing the probability density function of salinity PDF(S*). Our findings reveal that as the nonlinear parameter increases, the amount of salt transported by descending fingers from the upper to the lower layer decreases. This reduction in salt transport indicates a corresponding decline in mixing efficiency with higher values of the nonlinear parameter., Xesús Nogueira acknowledges the support provided by the [Grant PID2021-125447OB-I00] funded by MCIN/AEI/10.13039/501100011033 and by "ERDF A way of making Europe", and the funds by [Grant TED2021-129805B-I00] funded by MCIN/AEI/10.13039/501100011033 and by the "European Union NextGenerationEU/PRTR". They also acknowledge the funding provided by the Xunta de Galicia (grant \#ED431C 2022/06)., Xunta de Galicia; ED431C 2022/06
RUC. Repositorio da Universidade da Coruña
Publication Artículo científico (JournalArticle)

IGA-based topology optimization in the design of stress-constrained compliant mechanisms

  • Villalba Rama, Diego
  • Gonçalves, M.
  • Dias-de-Oliveira, J.
  • Andrade-Campos, A.
  • Valente, R.
[Abstract:] Topology design of compliant mechanisms has gained wide popularity among the scientific community, and their use in the mechanical engineering field is being of upmost importance. In this paper, an isogeometric analysis (IGA) formulation is used to solve the topology optimization problem of compliant mechanisms. Stress constraints are introduced in the problem to guarantee the attainment of realistic solutions. For this purpose, an overweight constraint is considered for the design process, replacing the use of local stress constraints. The material distribution in the domain is modeled with quadratic B-splines and with a uniform relative density within each element of the mesh. These strategies to define the material layout are used to compare the IGA-based formulation with the finite element (FEM) formulation. The IGA formulation provides several advantages with respect to the classical FEM-based approaches that are shown and analyzed with an input-parameters sensitivity analysis. The sensitivity analysis and the assessment of the importance of introducing of stress constraints in the problem are developed by solving two benchmark problems. Regarding the sensitivity analysis of input parameters, the results show that the ratio between the material and the springs stiffnesses is the parameter with the largest influence on the solutions of the problem. Moreover, the advantages of the IGA formulations over FEM formulations are related with the computational time, the smoothness of the structural borders, and the non-appearance of the checkerboard patterns. With respect to the stress constraints, the results show that they have to be considered in order to avoid instability and structural integrity problems., Universidades)” through “Margarita Salas grants for the training of new PhD—2022” [RSU.UDC.MS25], by Spanish Government “(Ministerio de Ciencia e Innovación)” through “Knowledge generation projects” [PID2021-125447OB-I00] and through “Strategic projects oriented to the ecological and digital transition” [TED2021-129991B-C31], by the “Xunta de Galicia “(Consellería de Cultura, Educación, Formación Profesional y Universidades)” through “Grants for the consolidation and structuring of competitive research units of the Galician University System: Competitive reference group” [ED431C 2022/06], by Portuguese Government “(Ministério da Educação e Ciência - Fundação para a Ciência e a Tecnologia (FCT) )” through projects [UIDB/00481/2020] and [UIDP/00481/ 2020] and by Portuguese Government “(Centro Portugal Regional Operational Program (Centro2020))” under the PORTUGAL 2020 Partnership Agreement, with the European Regional Development Fund through project [CENTRO-01-0145-FEDER-022083]., Xunta de Galicia; ED431C 2022/06, Portugal. Fundação para a Ciência e a Tecnologia; UIDB/00481/2020, Portugal. Fundação para a Ciência e a Tecnologia; UIDP/00481/2020, Portugal. Centro de Tecnologia Mecânica e Automação; CENTRO-01-0145-FEDER-022083
RUC. Repositorio da Universidade da Coruña
Publication Artículo científico (JournalArticle)

MLS-SPH-ALE: A Review of Meshless-FV Methods and a Unifying Formulation for Particle Discretizations

  • Eirís, Antonio
  • Ramírez, Luis
  • Couceiro, Iván
  • Fernández-Fidalgo, Javier
  • París, José
  • Nogueira, Xesús
Financiado para publicación en acceso aberto: Universidade da Coruña/CISUG, [Abstract:] Mesh-based and particle methods were conceived as two different discretization strategies to solve partial differential equations. In the last two decades computational methods have diversified and a myriad of hybrid formulations that combine elements of these two approaches have been developed to solve Computational fluid dynamics problems. In this work we present a review about the meshless-FV family of methods, an analysis is carried out showing that the MLS-SPH-ALE method can be considered as a general formulation from which a set of particle-based methods can be recovered. Moreover, we show the relations between the MLS-SPH-ALE method and the finite volume method. The MLS-SPH-ALE method is a versatile particle-based method that was developed to circumvent the consistency issues of particle methods caused by the use of the kernel approximation. The MLS-SPH-ALE method is developed from the differential equation in ALE form using the partition unity property which is automatically fulfilled by the Moving Least Squares approximation., The authors gratefully acknowledge the support provided by the [Grant PID2021-125447OB-I00] funded by MCIN/AEI/ 10.13039/501100011033 and by “ERDF A way of making Europe”, and the funds by [Grant TED2021–129805B-I00] funded by MCIN/AEI/ 10.13039/501100011033 and by the “European Union NextGenerationEU/PRTR”. They also acknowledge the funding provided by the Xunta de Galicia (Grant #ED431C 2022/06). J. Fernández-Fidalgo acknowledges the support provided by “Ayudas para la recualificación del sistema universitario español para 2021–2023. Modalidad Margarita Salas RSU.UDC.MS20" by the Ministerio de Universidades of the Spanish Government and European Union through the NextGenerationEU funds. Open Access funding provided thanks to the CRUE-CSIC agreement with Springer Nature., Xunta de Galicia; ED431C 2022/06