Skip to main content

SISTEMAS DE ANTENAS PARA COMUNICACIONES INTEGRADAS

PID2022-136869NB-C31

•
Funding agency name Agencia Estatal de Investigación
Funding agency acronym AEI
Program Programa Estatal para Impulsar la Investigación Científico-Técnica y su Transferencia
Subprogram Subprograma Estatal de Generación de Conocimiento
Call Proyectos de I+D+i (Generación de Conocimiento y Retos Investigación)
Call year 2022
State Plan 2021-2023 Plan Estatal de Investigación Científica y Técnica y de Innovación
Beneficiary centre UNIVERSITAT POLITECNICA DE CATALUNYA

Resultados relacionados

Resultados totales (Incluyendo duplicados): 26
Encontrada(s) 1 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Multimodal planar monopole filtenna for 5G applications

  • Ribó, Miquel
  • Pradell, Lluís
  • Blanch, Sebastián
  • Cabedo Fabres, Marta|||0000-0002-3370-1802
  • Ferrando Bataller, Miguel|||0000-0003-3561-5112
[EN] This paper presents a novel planar filtering antenna (filtenna) with simple layout based on tightly -coupled different -length monopoles. Its design methodology is based on an even-mode/odd-mode decomposition of the monopole currents, and the combination of both modes in a multimodal circuit model that facilitates the design and tuning of the antenna and the accompanying feeding network, since most of the process is performed using fast circuit simulations. The circuit model casts light into the interaction between conducting and radiating modes in the bulk of the antenna, and on how this interaction can be used to propose feedback loops that increase and define the radiation band. Using these modal tools, a filtenna was designed and fabricated to fully cover the new 5G frequency bands (n77, n78 and n79) from 3 to 5 GHz that are currently being adopted by many countries for high -capacity data transmission. It features a 62.9% FWB, dipole -like radiation patterns, good out -of -band rejection up to 10 GHz, and a very good trade-off between design/structural-simplicity and bandwidth., This work was supported in part by Ministerio de Ciencia, Innovacion y Universidades, Spain under Grant PID2022-136869NB-C31 financed by MCIN/AEI/10.13039/501100011033/FEDER, UE and PID2022-136869NB-C33 financed by MCIN/AEI/10.13039/501100 011033/FEDER, UE.
UPCommons. Portal del coneixement obert de la UPC
Publication Artículo científico (JournalArticle)

UWB microwave functional brain activity extraction for Parkinson's disease monitoring

  • Akazzim, Youness|||0000-0002-7957-4044
  • Palacios Arias, César Augusto|||0000-0003-1298-8434
  • Jofre Cruanyes, Marc|||0000-0002-8912-6595
  • El Mrabet, Otman
  • Romeu Robert, Jordi|||0000-0003-0197-5961
  • Jofre Roca, Lluís|||0000-0002-0547-901X
Microwaves have proven their imaging capabilities to visualize the body composition for medical applications, thanks to their penetration inside biological structures. In this context, this article presents a novel methodology that aims to extract not just the internal morphology, but also the brain’s functional activity using the UWB pulse amplitude modulation (PAM) technique to have simultaneously functional monitoring and imaging capability and apply it to monitor the Parkinson’s disease (PD). The radio-frequency system is composed of two orthogonal sets of double UWB probes operating in the frequency range of 0.5–1.5 GHz. An experimental setup has been devised that avoids complex in vivo testing, albeit allows a system proof-of-concept validation. A bio-tag (BT) consisting of an optically modulated photodiode is used to emulate local medium changes associated with cell activity. The proposed system is used to first extract the modeled brain action potential (AP) to validate the performance of the BT and then to monitor the PD based on the beta frequency band character within basal ganglia–thalamocortical (BGTC) which is a key marker for the PD. The results show a good capability of locating and differentiating the signals generated within the phantom by the BT, alternatively emulating the healthy and PD’s state, based on the frequency. The obtained results of the functional monitoring technique on distinguishing the healthy from nonhealthy brain model activity, as well as in the phantom mimicking the average proprieties of a human head, will serve as a basis for detecting functional diseases in the future., This work was supported in part by Comision Interministerial de Ciencia y Tecnologia (CICYT) PID2019-107885GB-C31, PID2022-136869NB-C31, Catalan Research Group 2021 SGR 01415, Metropolis PLEC2021-007609, (FI-SDUR) under Grant 2021 FISDU 00195; in part by the PDR-2014-2022/56-30157-2021-2A grant of the Generalitat de Catalunya; and in part by the Prueba de Concepto PDC2022-133091-I00 grants of the Ministerio de Ciencia, Innovación y Universidades (Spain)., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publication Artículo científico (JournalArticle)

3D pain face expression recognition using a ML-MIMO radar profiler

  • López Montero, María José|||0000-0002-2286-7479
  • Palacios Arias, César Augusto|||0000-0003-1298-8434
  • Romeu Robert, Jordi|||0000-0003-0197-5961
  • Jofre Roca, Lluís|||0000-0002-0547-901X
This study proposes a new method for the detection of facial expressions of pain using a 3D profiler that combines a multiple-input-multiple-output (MIMO) radar system with a machine learning (ML) model (ML-MIMO radar profiler). It offers a solution for pain detection of facial expressions in a non-invasive, non-intrusive, and cost-effective manner. The ML-MIMO radar profiler employs six radars behind a lens to monitor changes in six facial regions and build a 3D facial profile with real-time facial activity information. A dielectric lens was used to ensure an optimal beam size to effectively illuminate each facial region. Signal processing is performed using dynamic time deformation to determine the longitudinal distance and a discrete stationary wavelet transform to filter the signal and improve accuracy. The information from the 3D profiler was compared with the facial action coding system (FACS) to determine actual facial expressions. A machine learning algorithm was trained to learn action units from the FACS and compare them with the information provided by the ML-MIMO radar profiler, thereby performing facial expression classification. In this study, we analyzed four facial expressions: hapiness, sadness, anger, and pain. Identification and classification were performed using a machine-learning model based on multilayer perceptrons. The results revealed 92% accuracy of the system for pain expression, whereas expressions of happiness, sadness, and anger were detected with 88, 86, and 87% accuracy, respectively., This work was supported in part by the Spanish ‘‘Comision Interministerial de Ciencia y Tecnologia’’ (CICYT) under Project PID2019-107885GB-C31, Project PID2022-136869NB-C31, and Project MDM2016-0600; in part by Metropolis under Grant PLEC2021-007609; in part by the Catalan Research Group, Centre Específic de Recerca en Comunicació i Detecció-UPC (CommSensLab-UPC), under Grant 2021 SGR 01415; and in part by the ‘‘Secretaría Nacional de Educación Superior, Ciencia, Tecnología e Innovación’’ (SENESCYT) from the Ecuadorian Government., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publication Artículo científico (JournalArticle)

Accurate and time-efficient electromagnetic scattering analysis of thick impenetrable planar structures

  • Úbeda Farré, Eduard|||0000-0001-6759-0445
  • Heldring, Alexander|||0000-0003-2011-2096
  • Tapia Folch, Núria
  • Rius Casals, Juan Manuel|||0000-0003-0606-5422
© 2025 IEEE. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting/republishing this material for advertising or promotional purposes,creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other works., The scattering analysis of perfectly conducting plates, with very small electrical thickness, in the free space is normally carried out through the zero-thickness approximation, which arises from modelling the whole closed surface enclosing the plate as an open surface. The resulting accuracy, though acceptable in many practical applications, deteriorates drastically for growing plate thicknesses or under grazing-angle incidence. In this paper, we provide a thorough description of the recently proposed thick-plate approach, which, while maintaining the agile single-mesh management of the zero-thickness scheme, offers improved accuracy with restricted computational overhead for a wider range of plate thicknesses or plane wave incidences. The computed thick-plate RCS solution deviation as compared with the zero-thickness and full method-of-moment solutions is quantified for an illustrative variety of flat perfectly conducting structures with different electrical dimensions, shapes (rectangular or circular), rim contour (straight or rounded) and plane wave incidence (perpendicular or grazing)., This work is part of the R&D projects PID2020-118410RB-C21, PID2023- 146245OB-C21, PID2022-136869NB-C31, PDC2022-133091-I00 funded by MICIU/AEI/10.13039/501100011033/FEDER/UE (Agencia Estatal de Investigación, Spain and the UE), and the Research Group 2021 SGR 01415 funded by the Catalan Agency for Management of University and Research Grants (AGAUR)., Peer Reviewed, 8 - Treball Decent i Creixement Econòmic, 8.2 - Aconseguir nivells més elevats de productivitat econòmica mitjançant la diversificació, la modernització tecnològica i la innovació, entre d’altres maneres centrant l’atenció en sectors de més valor afegit i ús intensiu de mà d’obra, 8.4 - Millorar progressivament, per a 2030, la producció i el consum eficients dels recursos mundials i procurar desvincular el creixement econòmic de la degradació del medi ambient, de conformitat amb el Marc decennal de programes sobre modalitats sostenibles de consum i producció, començant pels països desenvolupats, 9 - Indústria, Innovació i Infraestructura, 9.4 - Per a 2030, modernitzar les infraestructures i reconvertir les indústries perquè siguin sostenibles, usant els recursos amb més eficàcia i promovent l’adopció de tecnologies i processos industrials nets i racionals ambientalment, i aconseguint que tots els països adoptin mesures d’acord amb les capacitats respectives, 9.5 - Augmentar la investigació científica i millorar la capacitat tecnològica dels sectors industrials de tots els països, en particular els països en desenvolupament, entre d’altres maneres fomentant la innovació i augmentant substancialment, d’aquí al 2030, el nombre de persones que treballen en el camp de la investigació i el desenvolupament per cada milió d’habitants, així com la despesa en investigació i desenvolupament dels sectors públic i privat, 12.6 - Encoratjar les empreses, en especial les grans empreses i les empreses transnacionals, a adoptar pràctiques sostenibles i a incorporar informació sobre la sostenibilitat en el seu cicle de presentació d’informes, 12 - Producció i Consum Responsables
UPCommons. Portal del coneixement obert de la UPC
Publication Artículo científico (JournalArticle)

Analog radio-over-fiber transmitter with optical frequency upconversion and optimized optical carrier-to-signal ratio

  • Vega Piña, Sara|||0000-0002-4853-7929
  • Méndez Canú, Rodrigo Otoniel|||0009-0008-9028-6386
  • Santos Blanco, M. Concepción|||0000-0002-5103-5356
The performance of an analog radio-over-fiber (A-RoF) transmitter with optical frequency conversion (OFC) is evaluated analytically and experimentally. It employs two push-pull Mach-Zehnder modulators (PP-MZM): one for intermediate frequency (IF) data modulation and another, biased at the null point (NP), for OFC. Results with RF tones and 5 G NR data in FR1 and FR2 bands using QPSK and 16-QAM up to 355 Mbps show enhanced chromatic dispersion tolerance and improved error vector magnitude (EVM). Successful transmission of 200 Mbps 5G NR data through 6 km fiber and 1 m wireless at 28 GHz was achieved with by 4 LO multiplication via MZM overmodulation., This work was funded by the European Union’s Horizon Europe research and innovation program under the Marie Skłodowska-Curie grant agreement No. [101073265 (EWOC)], by the Spanish Ministerio de Ciencia e Innovación (MICIN) under projects [PID2022-137754OB] (CONFLOC) and [PID2022-136869NB-C31] (MCIN/AEI/10.13039/501100011033/FEDER, UE), and by the Catalan Goverment University and Research Aid Management Agency (AGAUR) with Research Group grant [2021 SGR 01415] and with pre-doctoral grant [2021 FISDU 00094] to the first author (Corresponding author: Sara Vega)., Peer Reviewed, Objectius de Desenvolupament Sostenible::9 - Indústria, Innovació i Infraestructura, Objectius de Desenvolupament Sostenible::9 - Indústria, Innovació i Infraestructura::9.1 - Desenvolupar infraestructures fiables, sostenibles, resilients i de qualitat, incloent infraestructures regionals i transfrontereres, per tal de donar suport al desenvolupament econòmic i al benestar humà, amb especial atenció a l’accés assequible i equitatiu per a totes les persones
UPCommons. Portal del coneixement obert de la UPC
Publication Artículo científico (JournalArticle)

Magnetoelectric dipole antenna framework supporting orbital angular momentum modes

  • Jofre Cruanyes, Marc|||0000-0002-8912-6595
  • Akazzim, Youness|||0000-0002-7957-4044
  • Blanch Boris, Sebastián|||0000-0002-8757-583X
  • Romeu Robert, Jordi|||0000-0003-0197-5961
  • Cetiner, Bedri Artug
  • Jofre Roca, Lluís|||0000-0002-0547-901X
The ability to utilize resources to meet the need of growing diversity of communication services and user behavior marks the future of cognitive wireless communication systems. Cognitive wireless technologies for vehicular communications, in combination with Orbital Angular Momentum (OAM) modes aim at extending Non-Line-Of-Sight (NLOS) short-distance communications for smart mobility. In this regard, OAM antenna frameworks need to be developed to support these technologies. In this work, we describe a magnetoelectric dipole antenna framework supporting OAM modes. The framework is derived from moment tensors of specific vector spherical harmonic functions synthesized from dipoles. The antenna framework is discussed in terms of OAM generation, and it is validated numerically and experimentally for l = 1 OAM mode, achieving more than 500MHz operation bandwidth at the frequency of operation of 3.5GHz. Also, for l = 1 OAM mode, the null aligns precisely with the anticipated dimensions numerically computed., This work was financially supported by PDR-2014-2022/56-30157-2021-2A, 2021 SGR 01415 Q0818003F and Metropolis PLEC2021-007609 grants of the Generalitat de Catalunya and European Regional Development Fund (FEDER), by CICYT PID2019-107885GB-C31, PID2022-136869NB-C31 and Prueba de Concepto PDC2022-133091-I00 grants of the Agencia Estatal de Investigación (Spain) and Next Generation EU., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publication Artículo científico (JournalArticle)

Direct connection of uni-traveling-carrier photodiodes to antennas for frequency reconfigurable fiber-radio transmission in the Ka band

  • Vega Piña, Sara|||0000-0002-4853-7929
  • Ballesteros Sánchez, Christian|||0000-0002-4395-9057
  • Caillaud, Christophe
  • Lanteri, Delphine
  • Mekhazni, Karim
  • Santos Blanco, M. Concepción|||0000-0002-5103-5356
  • Pradell i Cara, Lluís|||0000-0003-4026-226X
  • Jofre Roca, Lluís|||0000-0002-0547-901X
A compact photonically-driven wireless emitter based on a Uni-Traveling-Carrier photodiode (UTC-PD) which directly connects to a short asymmetrical inductive dipole (SAID) antenna is presented. The design exploits the dependence of the UTC-PD output impedance with the reverse bias voltage to provide maximum power transfer via conjugate impedance matching at different operative frequencies within the Ka band (26.5–40 GHz) with 6 dB antenna directivity and 1 GHz 10 dB return loss channel width. Electro-optical transmission measurements confirm that the photodiode responsivity is maintained throughout the whole voltage swing used for reconfigurability., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publication Artículo científico (JournalArticle)

Movement tracking and false positive reduction method for microwave colonoscopy systems

  • Garrido Atienza, Alejandra|||0000-0003-1371-8962
  • Guardiola Garcia, Marta
  • Neira Steinfort, Luz Maria
  • Romeu Robert, Jordi|||0000-0003-0197-5961
  • Fhager, Andreas
This paper presents a novel computational method for addressing the challenge of uncontrolled antenna movement in microwave imaging systems for colonoscopy. The proposed method tracks the movement of the antenna array by analyzing phase shifts in S-parameters across multiple channels. By exploiting the symmetry of the probe and correlating phase changes with displacement, this technique reduces false positives due to probe movements artifacts in real-time. Simulated and experimental results in a colon phantom model show that this method can correct displacements of up to 6 mm, reducing the artifacts in reconstructed images notably., This work was supported by CPP2021-008536, Horizon 2020 under Grant 960251, in part by the Spanish Ministerio de Ciencia e Innovacion under Grant DIN2019-010857/AEI/10.13039/501100011033, and in part by the Project PID2022-136869NB-C31/ AEI/10.13039/501100011033/ FEDER, UE, funded by the Agencia Estatal de Investigacion (AEI) and the European Regional Development Fund (FEDER)., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publication Artículo científico (JournalArticle)

Qubit rate modulation-based time synchronization mechanism for multi-node quantum networks

  • Jofre Cruanyes, Marc|||0000-0002-8912-6595
The combination of quantum and telecommunication networks enables to revolutionize the way information is used, offering unparalleled capabilities and making it an ideal choice for many critical applications. In this sense, quantum protocols generally have a unique requirement to have strict time synchronization in order to operate, which generally consume quantum resources of part of the exchanged qubits. Accordingly, work demonstrates and characterizes a temporal alignment mechanism for quantum networks based on frequency testing, allowing to preserve the quantum state of qubits. The time synchronization correction achieved is within 100 ns working at 5 MHz with temporal and relative frequency offsets commonly acquired in quantum links using conventional hardware clocks with temporal stability in the range of 10-8 and 200-ns jitter., This work was supported in part by the Agencia Estatal de Investigación (Spain) under Grant PID2022-137329OB-C41, Grant PID2022-136869NB-C31 (MCIN/AEI/10.13039/501100011033/FEDER, UE), Grant CNS2024-154600, and Grant PDC2022-133091-I00, in part by the Catalan Government University and Research Aid Management Agency (AGAUR) with Research Group under Grant 2021 SGR 01046, and in part by the Technical University of Catalonia (UPC) under Grant ALECTORS 2024.
UPCommons. Portal del coneixement obert de la UPC
Publication Artículo científico (JournalArticle)

Microwave imaging for Parkinson’s disease detection: A phantom-based feasibility study using temperature-controlled dielectric variations

  • Cardinali, Leonardo
  • Rodríguez Duarte, David Orlando
  • Tobón Vásquez, Jorge Alberto
  • Vipiana, Francesca
  • Jofre Roca, Lluís|||0000-0002-0547-901X
Parkinson’s disease (PD) is characterized by pathological changes in the substantia nigra, which in its early stages may manifest as structural and functional asymmetries between the two hemispheres. Microwave imaging has recently emerged as a promising non-invasive tool to detect subtle dielectric variations. In the context of Parkinson’s disease, such contrasts are expected to arise from the underlying physiological alterations in brain tissue, although their magnitude has not yet been fully characterized. In this work, we investigate the feasibility of differential microwave imaging, where detection is based on permittivity contrasts, through a controlled phantom study. A simple two-dimensional head phantom was constructed using a 3D-printed cylindrical container filled with water, incorporating a Teflon tube to represent the substantia nigra. The tube was filled with hot water, whose gradual cooling emulated small dielectric changes. Since the dielectric properties of water vary linearly with temperature over 0.5–3 GHz, we first validated this dependence through both numerical analysis and experimental measurements. Four antennas were then employed in a differential imaging configuration, with image reconstruction performed via the multi-frequency bi-focusing algorithm. The results show that the system can successfully detect a dielectric contrast corresponding to a temperature variation as small as 0.4 °C, equivalent to approximately 0.17% in relative permittivity. While the exact dielectric changes associated with PD remain to be determined, these results demonstrate that the proposed approach is sensitive to very small contrasts, supporting the potential of differential microwave imaging as a candidate tool for future investigations into Parkinson’s disease detection., This work was supported in part by the project “THERAD—Microwave Theranostics for Alzheimer’s Disease”, funded by Compagnia di San Paolo; in part by the project “INSIGHTFOOD—An innovative microwave sensing system for the evaluation and monitoring of food quality and safety”, funded by the Italian Ministry of Foreign Affairs and International Cooperation (MAECI, CUP E13C23000180005); in part by the Generalitat de Catalunya and European Regional Development Fund (FEDER) under Grant PDR-2014-2022/56-30157-2021-2A, Grant 2021 SGR 01415 Q0818003F, and Grant Metropolis PLEC2021-007609; in part by the Agencia Estatal de lnvestigacion, Spain, under Grant CICYT PID2019-107885GBC31, Grant PID2022-136869NB-C31, and Grant Prueba de Concepto PDC2022-133091-IO0; and in part by Next Generation EU. It was carried out partially within the Agritech National Research Center, funded by the European Union Next—Generation EU (Piano Nazionale di Ripresa e Resilienza (PNRR)—MISSIONE 4 COMPONENTE 2, INVESTIMENTO 1.4—D.D. 1032 17/06/2022, CN00000022)., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publication Artículo científico (JournalArticle)

High-sensitivity microwave resonator sensor for aqueous glucose detection using field-concentrating elements

  • Ataa Allah, Fatima
  • Ataa-Allah, Houda
  • El mrabet, Otman
  • Aznabet, Mariem
  • Romeu Robert, Jordi|||0000-0003-0197-5961
  • Jofre Roca, Lluís|||0000-0002-0547-901X
In this article, we present a highly sensitive microwave sensor for determining the concentration of aqueous glucose solutions in the microwave regime. The proposed sensor is based on a single split-ring resonator (SRR) printed on a Rogers RO3003 substrate and operates at 2.9 GHz. The sensitivity of this sensor is enhanced by using a narrow gap of approximately 100 µm, which increases the capacitance of the SRR and, more importantly, produces a localized field enhancement within the gap region. Moreover, the proposed design operates with only 2 µL of sample, a notable improvement over sensors that typically require larger liquid volumes. Both the simulation and measurement results showed a clear linear shift in the resonance frequency over a concentration range of 0–400 mg/dL, with the ability to detect minimal concentration variations as small as 50 mg/dL. These results confirm the effectiveness of the sensor for noninvasive glucose detection and represent a significant advancement in the field of microwave sensing., This work was supported in part by the Generalitat de Catalunya and European Regional Development Fund (FEDER) under Grant PDR2014-2022/56-30157-2021-2A, Grant 2021 SGR 01415 Q0818003F, and Grant Metropolis PLEC2021-007609; in part by the Agencia Estatal de Investigación, Spain, under Grant CICYT PID2019-107885GB- C31, PID2022-136869NB-C31 MICIU / AEI / 10.13039 / 501100011033/ FEDER, UE, and Grant Prueba de Concepto PDC2022-133091-I00; and in part by the Next Generation EU. Additionally, this work is supported by the CNRST as part of the ”PhD-Associate Scholarship– PASS” Program., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publication Artículo científico (JournalArticle)

Multimodal planar monopole filtenna for 5G applications

  • Ribó Pal, Miquel
  • Cabedo Fabrés, Marta
  • Pradell i Cara, Lluís|||0000-0003-4026-226X
  • Blanch Boris, Sebastián|||0000-0002-8757-583X
  • Ferrando Bataller, Miquel
This paper presents a novel planar filtering antenna (filtenna) with simple layout based on tightly-coupled different-length monopoles. Its design methodology is based on an even-mode/odd-mode decomposition of the monopole currents, and the combination of both modes in a multimodal circuit model that facilitates the design and tuning of the antenna and the accompanying feeding network, since most of the process is performed using fast circuit simulations. The circuit model casts light into the interaction between conducting and radiating modes in the bulk of the antenna, and on how this interaction can be used to propose feedback loops that increase and define the radiation band. Using these modal tools, a filtenna was designed and fabricated to fully cover the new 5G frequency bands (n77, n78 and n79) from 3 to 5 GHz that are currently being adopted by many countries for high-capacity data transmission. It features a 62.9% FWB, dipole-like radiation patterns, good out-of-band rejection up to 10 GHz, and a very good trade-off between design/structural-simplicity and bandwidth., This work was supported in part by Ministerio de Ciencia, Innovación y Universidades, Spain under Grant PID2022-136869NBC31 financed by MCIN/AEI/10.13039/501100011033/FEDER, UE and PID2022-136869NB-C33 financed by MCIN/AEI/10.13039/501100 011033/FEDER, UE., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publication Artículo científico (JournalArticle)

Fast direct high frequency MoM solver using Butterfly algebra

  • Heldring, Alexander|||0000-0003-2011-2096
  • Úbeda Farré, Eduard|||0000-0001-6759-0445
  • Rius Casals, Juan Manuel|||0000-0003-0606-5422
Butterfly decomposition is a powerful method for compressing the Method of Moments impedance matrix at arbitrarily high frequency. It has been used to accelerate iterative solvers, achieving N log2 N, or “pseudo-linear” complexity per iteration. For direct solvers, pseudo-linear complexity has remained elusive. Presently, the lowest complexity achieved for high frequency impedance matrix factorization appears to be N3/2 logN, with an algorithm based on Butterfly decomposition. Further improvement requires an efficient Butterfly algebra, itself of pseudo-linear complexity. This paper introduces such an algebra, including summation, multiplication, concatenation and splitting of Butterfly decompositions. It is applied to matrix factorization, which is demonstrated both theoretically and through numerical examples to yield N log4 N complexity., This work is part of the R&D projects PID2023-146245OB-C21, PID2022-136869NB-C31 and PDC2022-133091-I00 funded by MICIU/AEI/10.13039/501100011033/FEDER/UE (Agencia Estatal de Investigación, Spain and the EU), and the Research Group 2021 SGR 01415 funded by the Catalan Agency for Management of University and Research Grants (AGAUR)., Peer Reviewed
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

High-sensitivity microwave resonator sensor for aqueous glucose detection using field-concentrating elements

  • Ataa Allah, Fatima
  • Ataa-Allah, Houda
  • El mrabet, Otman
  • Aznabet, Mariem
  • Romeu Robert, Jordi
  • Jofre Roca, Lluís
In this article, we present a highly sensitive microwave sensor for determining the concentration of aqueous glucose solutions in the microwave regime. The proposed sensor is based on a single split-ring resonator (SRR) printed on a Rogers RO3003 substrate and operates at 2.9 GHz. The sensitivity of this sensor is enhanced by using a narrow gap of approximately 100 µm, which increases the capacitance of the SRR and, more importantly, produces a localized field enhancement within the gap region. Moreover, the proposed design operates with only 2 µL of sample, a notable improvement over sensors that typically require larger liquid volumes. Both the simulation and measurement results showed a clear linear shift in the resonance frequency over a concentration range of 0–400 mg/dL, with the ability to detect minimal concentration variations as small as 50 mg/dL. These results confirm the effectiveness of the sensor for noninvasive glucose detection and represent a significant advancement in the field of microwave sensing., This work was supported in part by the Generalitat de Catalunya and European Regional Development Fund (FEDER) under Grant PDR2014-2022/56-30157-2021-2A, Grant 2021 SGR 01415 Q0818003F, and Grant Metropolis PLEC2021-007609; in part by the Agencia Estatal de Investigación, Spain, under Grant CICYT PID2019-107885GB- C31, PID2022-136869NB-C31 MICIU / AEI / 10.13039 / 501100011033/ FEDER, UE, and Grant Prueba de Concepto PDC2022-133091-I00; and in part by the Next Generation EU. Additionally, this work is supported by the CNRST as part of the ”PhD-Associate Scholarship– PASS” Program., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

UWB microwave functional brain activity extraction for Parkinson's disease monitoring

  • Akazzim, Youness
  • Palacios Arias, César Augusto
  • Jofre Cruanyes, Marc
  • El Mrabet, Otman
  • Romeu Robert, Jordi
  • Jofre Roca, Lluís
Microwaves have proven their imaging capabilities to visualize the body composition for medical applications, thanks to their penetration inside biological structures. In this context, this article presents a novel methodology that aims to extract not just the internal morphology, but also the brain’s functional activity using the UWB pulse amplitude modulation (PAM) technique to have simultaneously functional monitoring and imaging capability and apply it to monitor the Parkinson’s disease (PD). The radio-frequency system is composed of two orthogonal sets of double UWB probes operating in the frequency range of 0.5–1.5 GHz. An experimental setup has been devised that avoids complex in vivo testing, albeit allows a system proof-of-concept validation. A bio-tag (BT) consisting of an optically modulated photodiode is used to emulate local medium changes associated with cell activity. The proposed system is used to first extract the modeled brain action potential (AP) to validate the performance of the BT and then to monitor the PD based on the beta frequency band character within basal ganglia–thalamocortical (BGTC) which is a key marker for the PD. The results show a good capability of locating and differentiating the signals generated within the phantom by the BT, alternatively emulating the healthy and PD’s state, based on the frequency. The obtained results of the functional monitoring technique on distinguishing the healthy from nonhealthy brain model activity, as well as in the phantom mimicking the average proprieties of a human head, will serve as a basis for detecting functional diseases in the future., This work was supported in part by Comision Interministerial de Ciencia y Tecnologia (CICYT) PID2019-107885GB-C31, PID2022-136869NB-C31, Catalan Research Group 2021 SGR 01415, Metropolis PLEC2021-007609, (FI-SDUR) under Grant 2021 FISDU 00195; in part by the PDR-2014-2022/56-30157-2021-2A grant of the Generalitat de Catalunya; and in part by the Prueba de Concepto PDC2022-133091-I00 grants of the Ministerio de Ciencia, Innovación y Universidades (Spain)., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

3D pain face expression recognition using a ML-MIMO radar profiler

  • López Montero, María José
  • Palacios Arias, César Augusto
  • Romeu Robert, Jordi
  • Jofre Roca, Lluís
This study proposes a new method for the detection of facial expressions of pain using a 3D profiler that combines a multiple-input-multiple-output (MIMO) radar system with a machine learning (ML) model (ML-MIMO radar profiler). It offers a solution for pain detection of facial expressions in a non-invasive, non-intrusive, and cost-effective manner. The ML-MIMO radar profiler employs six radars behind a lens to monitor changes in six facial regions and build a 3D facial profile with real-time facial activity information. A dielectric lens was used to ensure an optimal beam size to effectively illuminate each facial region. Signal processing is performed using dynamic time deformation to determine the longitudinal distance and a discrete stationary wavelet transform to filter the signal and improve accuracy. The information from the 3D profiler was compared with the facial action coding system (FACS) to determine actual facial expressions. A machine learning algorithm was trained to learn action units from the FACS and compare them with the information provided by the ML-MIMO radar profiler, thereby performing facial expression classification. In this study, we analyzed four facial expressions: hapiness, sadness, anger, and pain. Identification and classification were performed using a machine-learning model based on multilayer perceptrons. The results revealed 92% accuracy of the system for pain expression, whereas expressions of happiness, sadness, and anger were detected with 88, 86, and 87% accuracy, respectively., This work was supported in part by the Spanish ‘‘Comision Interministerial de Ciencia y Tecnologia’’ (CICYT) under Project PID2019-107885GB-C31, Project PID2022-136869NB-C31, and Project MDM2016-0600; in part by Metropolis under Grant PLEC2021-007609; in part by the Catalan Research Group, Centre Específic de Recerca en Comunicació i Detecció-UPC (CommSensLab-UPC), under Grant 2021 SGR 01415; and in part by the ‘‘Secretaría Nacional de Educación Superior, Ciencia, Tecnología e Innovación’’ (SENESCYT) from the Ecuadorian Government., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

Analog radio-over-fiber transmitter with optical frequency upconversion and optimized optical carrier-to-signal ratio

  • Vega Piña, Sara
  • Méndez Canú, Rodrigo Otoniel
  • Santos Blanco, M. Concepción
The performance of an analog radio-over-fiber (A-RoF) transmitter with optical frequency conversion (OFC) is evaluated analytically and experimentally. It employs two push-pull Mach-Zehnder modulators (PP-MZM): one for intermediate frequency (IF) data modulation and another, biased at the null point (NP), for OFC. Results with RF tones and 5 G NR data in FR1 and FR2 bands using QPSK and 16-QAM up to 355 Mbps show enhanced chromatic dispersion tolerance and improved error vector magnitude (EVM). Successful transmission of 200 Mbps 5G NR data through 6 km fiber and 1 m wireless at 28 GHz was achieved with by 4 LO multiplication via MZM overmodulation., This work was funded by the European Union’s Horizon Europe research and innovation program under the Marie Skłodowska-Curie grant agreement No. [101073265 (EWOC)], by the Spanish Ministerio de Ciencia e Innovación (MICIN) under projects [PID2022-137754OB] (CONFLOC) and [PID2022-136869NB-C31] (MCIN/AEI/10.13039/501100011033/FEDER, UE), and by the Catalan Goverment University and Research Aid Management Agency (AGAUR) with Research Group grant [2021 SGR 01415] and with pre-doctoral grant [2021 FISDU 00094] to the first author (Corresponding author: Sara Vega)., Peer Reviewed, Objectius de Desenvolupament Sostenible::9 - Indústria, Innovació i Infraestructura, Objectius de Desenvolupament Sostenible::9 - Indústria, Innovació i Infraestructura::9.1 - Desenvolupar infraestructures fiables, sostenibles, resilients i de qualitat, incloent infraestructures regionals i transfrontereres, per tal de donar suport al desenvolupament econòmic i al benestar humà, amb especial atenció a l’accés assequible i equitatiu per a totes les persones, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

Fast direct high frequency MoM solver using Butterfly algebra

  • Heldring, Alexander
  • Úbeda Farré, Eduard
  • Rius Casals, Juan Manuel
Butterfly decomposition is a powerful method for compressing the Method of Moments impedance matrix at arbitrarily high frequency. It has been used to accelerate iterative solvers, achieving N log2 N, or “pseudo-linear” complexity per iteration. For direct solvers, pseudo-linear complexity has remained elusive. Presently, the lowest complexity achieved for high frequency impedance matrix factorization appears to be N3/2 logN, with an algorithm based on Butterfly decomposition. Further improvement requires an efficient Butterfly algebra, itself of pseudo-linear complexity. This paper introduces such an algebra, including summation, multiplication, concatenation and splitting of Butterfly decompositions. It is applied to matrix factorization, which is demonstrated both theoretically and through numerical examples to yield N log4 N complexity., This work is part of the R&D projects PID2023-146245OB-C21, PID2022-136869NB-C31 and PDC2022-133091-I00 funded by MICIU/AEI/10.13039/501100011033/FEDER/UE (Agencia Estatal de Investigación, Spain and the EU), and the Research Group 2021 SGR 01415 funded by the Catalan Agency for Management of University and Research Grants (AGAUR)., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

Movement tracking and false positive reduction method for microwave colonoscopy systems

  • Garrido Atienza, Alejandra
  • Guardiola Garcia, Marta
  • Neira Steinfort, Luz Maria
  • Romeu Robert, Jordi
  • Fhager, Andreas
This paper presents a novel computational method for addressing the challenge of uncontrolled antenna movement in microwave imaging systems for colonoscopy. The proposed method tracks the movement of the antenna array by analyzing phase shifts in S-parameters across multiple channels. By exploiting the symmetry of the probe and correlating phase changes with displacement, this technique reduces false positives due to probe movements artifacts in real-time. Simulated and experimental results in a colon phantom model show that this method can correct displacements of up to 6 mm, reducing the artifacts in reconstructed images notably., This work was supported by CPP2021-008536, Horizon 2020 under Grant 960251, in part by the Spanish Ministerio de Ciencia e Innovacion under Grant DIN2019-010857/AEI/10.13039/501100011033, and in part by the Project PID2022-136869NB-C31/ AEI/10.13039/501100011033/ FEDER, UE, funded by the Agencia Estatal de Investigacion (AEI) and the European Regional Development Fund (FEDER)., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

Magnetoelectric dipole antenna framework supporting orbital angular momentum modes

  • Jofre Cruanyes, Marc
  • Akazzim, Youness
  • Blanch Boris, Sebastián
  • Romeu Robert, Jordi
  • Cetiner, Bedri Artug
  • Jofre Roca, Lluís
The ability to utilize resources to meet the need of growing diversity of communication services and user behavior marks the future of cognitive wireless communication systems. Cognitive wireless technologies for vehicular communications, in combination with Orbital Angular Momentum (OAM) modes aim at extending Non-Line-Of-Sight (NLOS) short-distance communications for smart mobility. In this regard, OAM antenna frameworks need to be developed to support these technologies. In this work, we describe a magnetoelectric dipole antenna framework supporting OAM modes. The framework is derived from moment tensors of specific vector spherical harmonic functions synthesized from dipoles. The antenna framework is discussed in terms of OAM generation, and it is validated numerically and experimentally for l = 1 OAM mode, achieving more than 500MHz operation bandwidth at the frequency of operation of 3.5GHz. Also, for l = 1 OAM mode, the null aligns precisely with the anticipated dimensions numerically computed., This work was financially supported by PDR-2014-2022/56-30157-2021-2A, 2021 SGR 01415 Q0818003F and Metropolis PLEC2021-007609 grants of the Generalitat de Catalunya and European Regional Development Fund (FEDER), by CICYT PID2019-107885GB-C31, PID2022-136869NB-C31 and Prueba de Concepto PDC2022-133091-I00 grants of the Agencia Estatal de Investigación (Spain) and Next Generation EU., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

Supervised machine learning assisted driving stress monitoring MIMO radar system

  • López Montero, María José
  • Palacios Arias, César Augusto
  • Romeu Robert, Jordi
  • Jofre Roca, Lluís
Factors such as road traffic, challenging ambient temperature conditions, and extended periods of driving have detrimental effects on the physical and mental well-being of a driver. These factors can alter the stress levels, thereby diminishing his or her capacity to make effective decisions when faced with hazardous situations on the road. In this regard, this study presents a novel approach utilizing a multiple-input multiple-output (MIMO) radar system to accurately assess driver stress levels by measuring both physiological signals and driving behavior. The proposed method, assisted by a machine learning technique, provides comprehensive insights to classify the stress level of a driver into three states: drowsiness, awakeness, and anxiety. The MIMO radar system captures the elongation distance and velocity of six specific regions of the frontal torso of the driver in an advanced driving simulator based on virtual reality. This allows for the extraction of vital physiological parameters such as heart rate, respiratory rhythm, and breathing patterns over time, as well as the identification of changes in driving style determined by variations in their relative position in the seat and control of the steering wheel. Then, a fully connected neural network (FCNN) model is trained with the acquired data, and its performance is evaluated with volunteers submitted to different driving situations that induce stress in the driver. The findings show an accuracy in drowsiness detection of 90%, awakeness of 96% and anxiety of 85%., This work was supported by the Spanish “Comision Interministerial de Ciencia y Tecnologia” (CICYT) under projects PID2019-107885GB-C31, PID2022-136869NB-C31 and MDM2016-O6OO; Catalan Research Group 2017 SGR 219; and ”Secretaría Nacional de Educación Superior, Ciencia, Tecnología e Innovación” (SENESCYT) from the Ecuadorian government., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

Microwave imaging for Parkinson’s disease detection: A phantom-based feasibility study using temperature-controlled dielectric variations

  • Cardinali, Leonardo
  • Rodríguez Duarte, David Orlando
  • Tobón Vásquez, Jorge Alberto
  • Vipiana, Francesca
  • Jofre Roca, Lluís
Parkinson’s disease (PD) is characterized by pathological changes in the substantia nigra, which in its early stages may manifest as structural and functional asymmetries between the two hemispheres. Microwave imaging has recently emerged as a promising non-invasive tool to detect subtle dielectric variations. In the context of Parkinson’s disease, such contrasts are expected to arise from the underlying physiological alterations in brain tissue, although their magnitude has not yet been fully characterized. In this work, we investigate the feasibility of differential microwave imaging, where detection is based on permittivity contrasts, through a controlled phantom study. A simple two-dimensional head phantom was constructed using a 3D-printed cylindrical container filled with water, incorporating a Teflon tube to represent the substantia nigra. The tube was filled with hot water, whose gradual cooling emulated small dielectric changes. Since the dielectric properties of water vary linearly with temperature over 0.5–3 GHz, we first validated this dependence through both numerical analysis and experimental measurements. Four antennas were then employed in a differential imaging configuration, with image reconstruction performed via the multi-frequency bi-focusing algorithm. The results show that the system can successfully detect a dielectric contrast corresponding to a temperature variation as small as 0.4 °C, equivalent to approximately 0.17% in relative permittivity. While the exact dielectric changes associated with PD remain to be determined, these results demonstrate that the proposed approach is sensitive to very small contrasts, supporting the potential of differential microwave imaging as a candidate tool for future investigations into Parkinson’s disease detection., This work was supported in part by the project “THERAD—Microwave Theranostics for Alzheimer’s Disease”, funded by Compagnia di San Paolo; in part by the project “INSIGHTFOOD—An innovative microwave sensing system for the evaluation and monitoring of food quality and safety”, funded by the Italian Ministry of Foreign Affairs and International Cooperation (MAECI, CUP E13C23000180005); in part by the Generalitat de Catalunya and European Regional Development Fund (FEDER) under Grant PDR-2014-2022/56-30157-2021-2A, Grant 2021 SGR 01415 Q0818003F, and Grant Metropolis PLEC2021-007609; in part by the Agencia Estatal de lnvestigacion, Spain, under Grant CICYT PID2019-107885GBC31, Grant PID2022-136869NB-C31, and Grant Prueba de Concepto PDC2022-133091-IO0; and in part by Next Generation EU. It was carried out partially within the Agritech National Research Center, funded by the European Union Next—Generation EU (Piano Nazionale di Ripresa e Resilienza (PNRR)—MISSIONE 4 COMPONENTE 2, INVESTIMENTO 1.4—D.D. 1032 17/06/2022, CN00000022)., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

Multimodal planar monopole filtenna for 5G applications

  • Ribó Pal, Miquel
  • Cabedo Fabrés, Marta
  • Pradell i Cara, Lluís
  • Blanch Boris, Sebastián
  • Ferrando Bataller, Miquel
This paper presents a novel planar filtering antenna (filtenna) with simple layout based on tightly-coupled different-length monopoles. Its design methodology is based on an even-mode/odd-mode decomposition of the monopole currents, and the combination of both modes in a multimodal circuit model that facilitates the design and tuning of the antenna and the accompanying feeding network, since most of the process is performed using fast circuit simulations. The circuit model casts light into the interaction between conducting and radiating modes in the bulk of the antenna, and on how this interaction can be used to propose feedback loops that increase and define the radiation band. Using these modal tools, a filtenna was designed and fabricated to fully cover the new 5G frequency bands (n77, n78 and n79) from 3 to 5 GHz that are currently being adopted by many countries for high-capacity data transmission. It features a 62.9% FWB, dipole-like radiation patterns, good out-of-band rejection up to 10 GHz, and a very good trade-off between design/structural-simplicity and bandwidth., This work was supported in part by Ministerio de Ciencia, Innovación y Universidades, Spain under Grant PID2022-136869NBC31 financed by MCIN/AEI/10.13039/501100011033/FEDER, UE and PID2022-136869NB-C33 financed by MCIN/AEI/10.13039/501100 011033/FEDER, UE., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

Qubit rate modulation-based time synchronization mechanism for multi-node quantum networks

  • Jofre Cruanyes, Marc
The combination of quantum and telecommunication networks enables to revolutionize the way information is used, offering unparalleled capabilities and making it an ideal choice for many critical applications. In this sense, quantum protocols generally have a unique requirement to have strict time synchronization in order to operate, which generally consume quantum resources of part of the exchanged qubits. Accordingly, work demonstrates and characterizes a temporal alignment mechanism for quantum networks based on frequency testing, allowing to preserve the quantum state of qubits. The time synchronization correction achieved is within 100 ns working at 5 MHz with temporal and relative frequency offsets commonly acquired in quantum links using conventional hardware clocks with temporal stability in the range of 10-8 and 200-ns jitter., This work was supported in part by the Agencia Estatal de Investigación (Spain) under Grant PID2022-137329OB-C41, Grant PID2022-136869NB-C31 (MCIN/AEI/10.13039/501100011033/FEDER, UE), Grant CNS2024-154600, and Grant PDC2022-133091-I00, in part by the Catalan Government University and Research Aid Management Agency (AGAUR) with Research Group under Grant 2021 SGR 01046, and in part by the Technical University of Catalonia (UPC) under Grant ALECTORS 2024., Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

Direct connection of uni-traveling-carrier photodiodes to antennas for frequency reconfigurable fiber-radio transmission in the Ka band

  • Vega Piña, Sara
  • Ballesteros Sánchez, Christian
  • Caillaud, Christophe
  • Lanteri, Delphine
  • Mekhazni, Karim
  • Santos Blanco, M. Concepción
  • Pradell i Cara, Lluís
  • Jofre Roca, Lluís
A compact photonically-driven wireless emitter based on a Uni-Traveling-Carrier photodiode (UTC-PD) which directly connects to a short asymmetrical inductive dipole (SAID) antenna is presented. The design exploits the dependence of the UTC-PD output impedance with the reverse bias voltage to provide maximum power transfer via conjugate impedance matching at different operative frequencies within the Ka band (26.5–40 GHz) with 6 dB antenna directivity and 1 GHz 10 dB return loss channel width. Electro-optical transmission measurements confirm that the photodiode responsivity is maintained throughout the whole voltage swing used for reconfigurability., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

Accurate and time-efficient electromagnetic scattering analysis of thick impenetrable planar structures

  • Úbeda Farré, Eduard
  • Heldring, Alexander
  • Tapia Folch, Núria
  • Rius Casals, Juan Manuel
© 2025 IEEE. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting/republishing this material for advertising or promotional purposes,creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other works., The scattering analysis of perfectly conducting plates, with very small electrical thickness, in the free space is normally carried out through the zero-thickness approximation, which arises from modelling the whole closed surface enclosing the plate as an open surface. The resulting accuracy, though acceptable in many practical applications, deteriorates drastically for growing plate thicknesses or under grazing-angle incidence. In this paper, we provide a thorough description of the recently proposed thick-plate approach, which, while maintaining the agile single-mesh management of the zero-thickness scheme, offers improved accuracy with restricted computational overhead for a wider range of plate thicknesses or plane wave incidences. The computed thick-plate RCS solution deviation as compared with the zero-thickness and full method-of-moment solutions is quantified for an illustrative variety of flat perfectly conducting structures with different electrical dimensions, shapes (rectangular or circular), rim contour (straight or rounded) and plane wave incidence (perpendicular or grazing)., This work is part of the R&D projects PID2020-118410RB-C21, PID2023- 146245OB-C21, PID2022-136869NB-C31, PDC2022-133091-I00 funded by MICIU/AEI/10.13039/501100011033/FEDER/UE (Agencia Estatal de Investigación, Spain and the UE), and the Research Group 2021 SGR 01415 funded by the Catalan Agency for Management of University and Research Grants (AGAUR)., Peer Reviewed, 8 - Treball Decent i Creixement Econòmic, 8.2 - Aconseguir nivells més elevats de productivitat econòmica mitjançant la diversificació, la modernització tecnològica i la innovació, entre d’altres maneres centrant l’atenció en sectors de més valor afegit i ús intensiu de mà d’obra, 8.4 - Millorar progressivament, per a 2030, la producció i el consum eficients dels recursos mundials i procurar desvincular el creixement econòmic de la degradació del medi ambient, de conformitat amb el Marc decennal de programes sobre modalitats sostenibles de consum i producció, començant pels països desenvolupats, 9 - Indústria, Innovació i Infraestructura, 9.4 - Per a 2030, modernitzar les infraestructures i reconvertir les indústries perquè siguin sostenibles, usant els recursos amb més eficàcia i promovent l’adopció de tecnologies i processos industrials nets i racionals ambientalment, i aconseguint que tots els països adoptin mesures d’acord amb les capacitats respectives, 9.5 - Augmentar la investigació científica i millorar la capacitat tecnològica dels sectors industrials de tots els països, en particular els països en desenvolupament, entre d’altres maneres fomentant la innovació i augmentant substancialment, d’aquí al 2030, el nombre de persones que treballen en el camp de la investigació i el desenvolupament per cada milió d’habitants, així com la despesa en investigació i desenvolupament dels sectors públic i privat, 12.6 - Encoratjar les empreses, en especial les grans empreses i les empreses transnacionals, a adoptar pràctiques sostenibles i a incorporar informació sobre la sostenibilitat en el seu cicle de presentació d’informes, 12 - Producció i Consum Responsables, Postprint (published version)