Skip to main content

FIABILIDAD, SEGURIDAD Y EFICIENCIA ENERGETICA EN DISPOSITIVOS Y CIRCUITOS ELECTRONICOS PARA IOT EDGE (TIRELESS-IMSE)

PID2022-136949OB-C21

•
Funding agency name Agencia Estatal de Investigación
Funding agency acronym AEI
Program Programa Estatal para Impulsar la Investigación Científico-Técnica y su Transferencia
Subprogram Subprograma Estatal de Generación de Conocimiento
Call Proyectos de I+D+i (Generación de Conocimiento y Retos Investigación)
Call year 2022
State Plan 2021-2023 Plan Estatal de Investigación Científica y Técnica y de Innovación
Beneficiary centre UNIVERSIDAD DE SEVILLA

Resultados relacionados

Resultados totales (Incluyendo duplicados): 6
Encontrada(s) 1 página(s)

DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Reliability improvement of SRAM PUFs based on a detailed experimental study into the stochastic effects of aging

  • Santana-Andreo, A.
  • Saraza-Canflanca, P.
  • Castro-López, Rafael
  • Roca, Elisenda
  • Fernández, Francisco V.
Physical Unclonable Functions (PUFs) have gained attention as a lightweight hardware security primitive. In particular, the SRAM-based PUF uses the unpredictable power-up value of the cells within an SRAM. Although these values should ideally be always the same within each SRAM to accomplish a correct PUF operation, this is often not the case, especially when factors like circuit aging are considered. While certain studies explore the effects of aging on SRAM PUFs, they often simplify the analysis. For instance, some studies assume that only Bias Temperature Instability (BTI) contributes to circuit degradation while others evaluate the overall degradation without accounting for the stochastic effects of aging on each individual cell. In this work, we first perform a detailed characterization of the nature of aging in SRAM PUFs, demonstrating that the impact of Non-Conductive Hot-Carrier Injection cannot be neglected. We also show that different cells degrade differently, highlighting the importance of accounting for the stochasticity of aging. After that, a method based on the Data Retention Voltage metric to select the cells with the most stable power-up response is introduced. Using these cells to generate the PUF identifier will result in a more stable response, and thus a better PUF performance., This work was supported by grant PID2019-103869RB-C31 funded by MCIN/AEI/10.13039/501100011033 and by grant PID2022-136949OB-C21 funded by MCIN/AEI/10.13039/501100011033 and by “ERDF A way of making Europe”. Andrés Santana Andreo was supported by grant PRE-2020-093167 funded by MCIN/AEI/10.13039/501100011033 and by “ESF Investing in your future”., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

A Comprehensive Approach to Improving the Thermal Reliability of RTN-Based PUFs

  • De Los Santos-Prieto, F.
  • Rubio-Barbero, Francisco J.
  • Castro-López, Rafael
  • Roca, Elisenda
  • Fernández, Francisco V.
Copyright IEEE, Silicon Physical Unclonable Functions (PUFs) have emerged as a promising solution for generating cryptographic keys in low-cost resource-constrained devices. A PUF is expected to be reliable, meaning that its response bits should remain consistent each time the corresponding challenges are queried. Unfortunately, the stability of these challenge-response pairs (CRPs) can be seriously eroded by environmental factors like temperature variations and the aging of the integrated circuits implementing the PUF. Several approaches, including bit masking, bit selection techniques, and error-correcting codes, have been proposed to obtain a reliable PUF operation in the face of temperature variations. As for aging, a new kind of aging-resilient silicon PUF has been reported that uses the time-varying phenomenon known as Random Telegraph Noise (RTN) as the underlying entropy source. Although this type of PUF preserves its reliability well when aged, it is not immune to the impact of temperature variations. The work presented here shows that it is possible to improve the thermal reliability of RTN-based PUFs with a proper combination of (a) a novel optimization-based bit selection technique, that is also applicable to other types of PUFs based on differential measurements; and (b) a temperature-aware tuning of the entropy-harvesting function., This work was supported by grant TED2021-131240B-I00 funded by MICIU/AEI/10.13039/501100011033 and by the “European Union NextGenerationEU/PRTR”. The work was also supported by grant PID2022-136949OB-C21 funded by MICIU/AEI/10.13039/501100011033 and by “ERDF/EU", by grant ProyExcel_00536 funded by Consejería de Universidad, Investigación e Innovación of Junta de Andalucía, and by the Ministry for Digital Transformation and Public Function through grant USECHIP (TSI-069100-2023-001) of PERTE Chip Chair program, funded by European Union – Next Generation EU. F. J. Rubio-Barbero was supported by grant PREP2022-000765 funded by MICIU/AEI/10.13039/501100011033 and by “FSE+”., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Harvesting random telegraph noise for true random number generation

  • Rubio-Barbero, Francisco J.
  • Santos-Prieto, F. de los
  • Castro-López, Rafael
  • Roca, Elisenda
  • Fernández, Francisco V.
At first glance, Random Telegraph Noise (RTN) in deeply scaled CMOS transistors may seem like a reliability nuisance. Yet, behind the discrete trapping-and-detrapping events lurks a potent source of hardware entropy. In this paper, we harness RTN to build a dual-purpose security module that serves as both a Physical Unclonable Function (PUF) and a True Random Number Generator (TRNG). By measuring the so-called Maximum Current Fluctuation (MCF) at carefully chosen observation windows, our design switches effortlessly between the stable outputs needed for a PUF and the maximally unpredictable bitstreams demanded by a TRNG. Although single-defect RTN has long been deemed ideal for randomness, we show that multi-defect RTN scenarios, much more prevalent in real-world manufacturing, can also yield high-quality random bits, especially when aided by lightweight post-processing. Simple statistical metrics guide the initial tuning, after which the final bitstreams pass the NIST SP 800-22 test suite to validate the statistical soundness of our proposal. In doing so, we address key challenges that arise when designing an RTN-based TRNG and compare our results against state-of-the-art solutions, highlighting advantages in circuit simplicity, bit-rate scalability, and dual-use capability., This work was supported by grant TED2021-131240B-I00 funded by MICIU/AEI/10.13039/501100011033 and by the “European Union NextGenerationEU/PRTR”. The work was also supported by grant PID2022-136949OB-C21 funded by MICIU/AEI/10.13039/5011000 11033 and by “ERDF/EU”, by grant ProyExcel_00536 funded by Consejería de Universidad, Investigación e Innovación of Junta de Andalucía, and by Ministerio de Asuntos Económicos y Transformación Digital through grant TSI-069100-2023-1 of PERTE Chip Chair program, funded by European Union - NextGenerationUE. F. J. Rubio-Barbero was supported by grant PREP2022-000765 funded by MICIU/AEI/ 10.13039/501100011033 and by “FSE+”. A preliminary version of this work is published in the 2024 edition of the International Conference on Synthesis, Modeling, Analysis and Simulation Methods, and Applications to Circuit Design (SMACD) [24]., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Workload Compression Techniques to Scale Defect-Centric BTI Models to the Circuit Level

  • Santana-Andreo, A.
  • Van Santen, Victor M.
  • Castro-López, Rafael
  • Roca, Elisenda
  • Amrouch, Hussam
  • Fernández, Francisco V.
Bias Temperature Instability (BTI) poses a significant challenge in ensuring the reliability of digital systems, affecting the delay of digital logic gates, which ultimately can lead into timing failures. Sophisticated defect-centric models have been developed and successfully calibrated against empirical data to forecast the impacts of BTI at the device level. However, their application to large-scale digital circuits operating under realistic workloads over typical system lifetimes is limited because of the computational complexity of defect-centric models. To make the application of aging models in that context feasible, a useful technique is to compress the transistor workloads into simplified and hence manageable representative workloads. While fast in terms of execution speed, previous techniques struggle with accuracy when predicting aging degradation, and can reach a very high average error in threshold voltage increase prediction. In this work, we review the compression techniques described in the literature and propose two novel approaches that surpass existing ones in terms of accuracy, which is demonstrated for a complex digital design used as benchmark. Specifically, our best compression technique matches the predictions obtained through the reference uncompressed workloads, introducing negligible error, and maintains low execution times to efficiently and accurately scale defect-centric models to the circuit level., This work has been funded by grant USECHIP (TSI-069100-2023-001), project funded by the Secretary of State for Telecommunications and Digital Infrastructure, Ministry for Digital Transformation and Civil Service and by the European Union–NextGenerationEU/PRTR. Research activity was also carried out under grant PID2022-136949OB-C21 funded by MICIU/AEI/10.13039/501100011033 and by ERDF/EU. The work of Andrés Santana Andreo was supported by grant PRE-2020-093167 funded by MICIU/AEI/10.13039/501100011033 and by ESF Investing in your future., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Comprehensive statistical analysis of random telegraph noise: Impact of gate voltage, temperature, and Bias time

  • Martín-Martínez, Javier
  • Baghban-Bousari, N.
  • Castro-López, Rafael
  • Eric, D.
  • Roca, Elisenda
  • Rodríguez, Rosana
  • Portí, Marc
  • Fernández, Francisco V.
  • Nafría, Montserrat
This work presents a statistical analysis of Random Telegraph Noise (RTN) in nanoscale MOSFETs, from more than 13,000 traces measured under varying voltages, temperatures, and bias times on an array-based characterization chip. Using the Weighted Time Lag Plot (WTLP), we extracted the average number of detectable traps and the associated current step amplitudes. Results show that the average number of detectable traps increases with voltage and temperature but decreases after some bias time due to a transient trap population. The average current step amplitude grows with voltage and shows negligible dependence on temperature. These findings support improved RTN modeling and are relevant for both reliability analysis and cryptographic applications., The work was supported by grant PID2022-136949OB funded by MICIU/AEI/10.13039/501100011033 and by “ERDF/EU”. The work was also supported by ProyExcel 00536 funded by Consejería de Universidad, Investigación e Innovación, Junta de Andalucía., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Reliability-aware pairing and biasing strategies for OTFT-based PUFs

  • Santos-Prieto, F. de los
  • Eric, Deborah
  • Portí, Marc
  • Martín-Martínez, Javier
  • Roca, Elisenda
  • Ramon, Eloi
  • Ogier, Simon
  • Nafría, Montserrat
  • Fernández, Francisco V.
  • Castro-López, Rafael
Organic thin-film transistors (OTFTs) are attractive for low-cost printed electronics, and they can also enable lightweight hardware-security primitives such as Physical Unclonable Functions (PUFs). In differential OTFT-PUFs, time-zero mismatches between pairs of nominally identical transistors provide the entropy. However, reliability detractors like off-time aging, thermal annealing, electrical stress, or circuit non-idealities, induce bit flips, bias, and non-random outputs. This paper proposes a reliability-aware transistor-pairing strategy, where a genetic algorithm (GA) searches the combinatorial transistor pairing space and selects those maximizing reliability under multiple detractors while maintaining near-ideal PUF behavior. A fabricated OTFT array is first characterized at several bias conditions before and after controlled stresses, establishing baseline behavior and calibrating stochastic drift models. These models can generate large synthetic populations enabling systematic exploration of biasing, circuit non-idealities and GA hyperparameters, while also exposing the limits of fresh-only stability rules. The resulting guidelines are then applied to the fabricated array, where GA-selected pairings yield high reliability while maintaining near-ideal unpredictability and uniqueness. For practical deployment, this work shows that stressed measurements are only needed once to calibrate the model, after which chip-specific pairing can be successfully optimized pre-deployment from fresh measurements alone by running the GA on model-predicted degradation., This work has been supported by grants PID2022–136949OB-C21 and PID2022–136949OB-C22 funded by MICIU/AEI/10.13039/501100011033 and by “ERDF/EU”. This work has been also funded by grant ProyExcel_00536 funded by Consejería de Universidad, Investigación e Innovación of Junta de Andalucía and by grant USECHIP (TSI–069100–2023–001), project funded by the Secretary of State for Telecommunications and Digital Infrastructure, Ministry for Digital Transformation and Civil Service and by the European Union-NextGenerationEU/PRTR . A preliminary version of this work was presented at the 2025 edition of the International Conference on Synthesis, Modeling, Analysis and Simulation Methods, and Applications to Circuit Design (SMACD)., Peer reviewed