Skip to main content

PROCESOS SOSTENIBLES DE HIDROGENACION DE CO2 PARA PRODUCCION DE METANOL Y OLEFINAS LIGERAS MEDIANTE CATALIZADORES ELECTROHILADOS DERIVADOS DE BIOMASA RESIDUAL

PID2022-140844OB-I00

•
Funding agency name Agencia Estatal de Investigación
Funding agency acronym AEI
Program Programa Estatal para Impulsar la Investigación Científico-Técnica y su Transferencia
Subprogram Subprograma Estatal de Generación de Conocimiento
Call Proyectos de I+D+i (Generación de Conocimiento y Retos Investigación)
Call year 2022
State Plan 2021-2023 Plan Estatal de Investigación Científica y Técnica y de Innovación
Beneficiary centre UNIVERSIDAD DE MALAGA

Resultados relacionados

Resultados totales (Incluyendo duplicados): 3
Encontrada(s) 1 página(s)

Helvia. Repositorio Institucional de la Universidad de Córdoba
Publication Artículo científico (JournalArticle)

Simulating a sustainable biorefinery process as autonomous learning tool for collaborative work in the chemical engineering degree

  • Rosas, J.M.
  • Gutiérrez, M.C.
  • Peñas-Garzón, M.
  • Moreno-Medina, I.
  • Ruiz-Rosas, R.
  • Martín, M.A.
  • Rodríguez-Mirasol, J.
  • Cordero, T.
To improve the skills of the students in the Sustainable Refinery and Biorefinery subject of the Degree in Chemical Engineering, a learning tool has been implemented based on collaborative work, autonomy, and the use of information and communication technologies (ICT). This project includes the development of simulations that allow students to apply the learned concepts in a practical way, which were then assessed with the help of a specific rubric created for this purpose. Once the instrument was designed and implemented, its evaluation was carried out using a specific questionnaire. The results indicated that the use of simulation software in the classroom (with a 95 % acceptance rate among students) had a positive impact on the students, facilitating the comprehension of the content (scored a 3.9 out of 1–5 Likert scale), supporting their academic performance (close to 10 % average increase in the student qualifications), and fostering their professional profile in the field of Chemical Engineering (as supported by the rating of 4 out of 1–5 Likert scale). In addition, the constructive feedback provided by the students enabled the teaching team to identify areas for improvement and to consider future changes and updates to the pedagogical approach (as the organization of the seminars). Therefore, the use of different chemical process simulation software packages resulted in an essential strategy to develop the autonomous learning of the students and constituted a successful methodological tool, also preparing them to better meet the challenges of the industrial sector.
Helvia. Repositorio Institucional de la Universidad de Córdoba
Publication Artículo científico (JournalArticle)

Evaluation of acetanilide and antipyrine adsorption on lignin-derived activated carbons

  • Gutiérrez, M.C.
  • García-Mateos, F.
  • Ruiz-Rosas, R.
  • Rosas, J.M.
  • Rodríguez-Mirasol, J.
  • Cordero, T.
In this study, the removal of two emerging pollutants (EPs), antipyrine and acetanilide, through adsorption on activated carbons (ACs) prepared by chemical activation of Organosolv lignin with H3PO4 were evaluated. ACs with different pore size distribution were obtained at different impregnation ratios (H3PO4/lignin, 0.5–3.0 w/w) and activating temperatures (500–900 ◦C). The porosity and surface chemistry of the ACs were determined, and a bimodal size distribution of micropores and narrow mesopores was observed for the different ACs. These ACs were tested for antipyrine and acetanilide adsorption in aqueous solutions in a batch system at 20 ◦C and low concentration levels (0.5–10 ppm). In general, the ACs exhibited higher adsorption affinity to acetanilide than to antipyrine due to its smaller molecular size. Langmuir adsorption isotherm was able to describe the adsorption equilibrium data. A new Linear Driving Force (2-LDF) kinetic model, based on the bimodal size distribution of micropores and narrow mesopores observed for the ACs has been developed. The new model provided a more accurate description of the batch adsorption rates than that obtained from conventional kinetic models, and also enabled to relate the pore size distribution of the adsorbent with the adsorption kinetics. The validity of this model was checked in small-scale column fixed bed adsorption for the AC showing the highest affinity for both EP. The kinetic model and equilibrium adsorption isotherm obtained from the batch experiments were successfully used to provide an accurate description of the bed service time and the full breakthrough profile of acetanilide and antipyrine.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Cellulose and xylan nanofiber mats via electrospinning: Lignin-enhanced properties in wood-inspired biocomposites

  • García-Rollán, Miguel
  • Ruiz-Rosas, Ramiro
  • Rosas, Juana M.
  • Rodríguez-Mirasol, José
  • Porras-Vázquez, José M.
  • Benítez, José J.
  • Athanassiou, Athanassia
  • Heredia-Guerrero, José A.
  • Guzmán-Puyol, Susana
Nanofiber mats were fabricated by combining cellulose, xylan, and organosolv lignin. The biopolymers, and a small amount (15 wt. %) of polyethylene oxide, were dissolved in a mixture of trifluoroacetic acid and trifluoroacetic anhydride, then blended in various ratios (keeping cellulose as the main component and changing the proportions of lignin and hemicellulose) and processed via electrospinning. The resulting nanofiber mats were systematically characterized for their CIELAB color parameters, morphology, chemical composition, mechanical strength, thermal stability, hydrodynamic behavior, antioxidant capacity, and wettability. The incorporation of organosolv lignin significantly altered the color of the nanofiber mats, making them more brownish, with luminosity values from 90 for L-0 to 58 for L-50. It also disrupted the hydrogen bonding network, as evidenced by the chemical shift of the ATR-FTIR spectra. Additionally, organosolv lignin affected key mechanical properties with mechanical values similar to other polymer nanofibers, while thermogravimetric analysis revealed an enhancement of about 10°C in the heat resistant index, thereby broadening the potential applications of the nanofiber mats. Finally, the presence of organosolv lignin improved antioxidant capacity to values of 100% of RSA, reduced water uptake, and increased water contact angle to values of 110° for L-50., This work has been partially supported by the PID2022-140844OB-I00 project funded by MCIN /AEI /10.13039/501100011033 / FEDER, UE. This work has been partially supported by the Spanish “Ministerio de Ciencia, Innovación y Universidades” project RYC2023-042483-I/ MICIU/AEI/10.13039/501100011033 (cofinanced by the ESF+). M.G.R. acknowledges the assistance of MICINN through an FPU Grant (FPU 18/01402)., Peer reviewed