Skip to main content

DESARROLLO DE UN NUEVO MARCO DE EVALUACION DE RIESGOS INTELIGENTE Y DINAMICO MEDIANTE EL USO DE IA Y CFD

PID2023-150607OB-I00

•
Funding agency name Agencia Estatal de Investigación
Funding agency acronym AEI
Program Programa Estatal para Impulsar la Investigación Científico-Técnica y su Transferencia
Subprogram Subprograma Estatal de Generación de Conocimiento
Call Proyectos de I+D+i (Generación de Conocimiento y Retos Investigación)
Call year 2023
State Plan 2021-2023 Plan Estatal de Investigación Científica y Técnica y de Innovación
Beneficiary centre UNIVERSITAT POLITECNICA DE CATALUNYA

Resultados relacionados

Resultados totales (Incluyendo duplicados): 7
Encontrada(s) 1 página(s)

Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

A Comparison between FARSITE and FOREFIRE

  • Paugam, Ronan
  • Sánchez Gayet, Paula|||0009-0003-6372-716X
  • González Fernández, Irene|||0000-0001-8602-6495
  • Carrillo, Carlos|||0000-0003-3606-7517
  • Filippi, Jean Baptiste
Accurate fire spread modeling is essential for understanding and mitigating the impacts of wildfires. This study compares two fire spread models, FARSITE and FOREFIRE, by reconstructing the 2022 wildfire in El Pont de Vilomara, Spain. Both models use the Rothermel rate of spread (ROS) equation to model fire behavior, however, FOREFIRE employs a simplified fuel classification system, which may impact the accuracy of its predictions. Our analysis evaluates fire spread predictions in 0D (ROS), 2D (fire perimeter), and 3D (plume dynamics) simulations. Results show that FARSITE underestimates fire propagation, while FOREFIRE overestimates it, both requiring ROS adjustments to match observation. The coupled FOREFIRE-MesoNH require also ROS adjustment but better incorporates fire behavior representation.
UPCommons. Portal del coneixement obert de la UPC
Publication Artículo científico (JournalArticle)

OpenFOAM simulations of pressurized two phase propane tanks under heat load

  • Papadaki, Artemis|||0000-0002-8972-2178
  • Agueda Costafreda, Alba|||0000-0001-5021-8014
  • Planas Cuchi, Eulàlia|||0000-0002-7053-3959
The exposure of a pressurized tank to an external fire is closely related to the first phase of the Boiling Liquid Expanding Vapor Explosion (BLEVE) accidental scenario. This study investigated the internal pressurization, temperature increase and phase change of two phase propane tanks exposed to fire. CFD simulations, performed in OpenFOAM Foundation software version 11, were validated against four experimental cases. Conjugate heat transfer was considered to model the heat transport from the fire through the tank wall and into the tank content. The governing equations were formulated using the Volume Of Fluid (VoF) approach, and the evaporation and condensation phenomena were approximated by the Lee model. To reduce discretization errors, a mesh sensitivity analysis and the grid convergence index (GCI) method were applied. The simulations were able to capture effectively the pressure and temperature evolution. Overall, the Mean Average Percentage Error (MAPE) of the pressure was lower than 5% in three cases, with one case reaching 8%. For temperature, the MAPE measured at three positions inside the tank was under 6% in three cases, whereas in the remaining case one position showed a value of 17%. Thermal stratification was more evident in the vapor than in the liquid domain. In the liquid domain, stratification was quantified using a dimensionless parameter and the results show agreement with literature, validating the observed thermal behavior. The validated simulations contribute to the use of open-source computational tools in the process safety research field and can be used as a basis for predictive models related to the prevention and mitigation of BLEVE accidents., This work is supported by Joan Oró grant (ref. no 2023 FI-1 00913) at the Universitat Politècnica de Catalunya, Spain. A. Àgueda is a Serra Húnter Fellow. This research was funded by the Spanish Min- istry of Science, Innovation and Universities, Spain (Grant PID2023- 150607OB-I00 by MICIU/AEI/10.13039/501100011033, Spain and by ERDF/EU)., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publication Artículo científico (JournalArticle)

Wildfire risk to critical infrastructure: A systematic review highlighting the need for cross-sector collaboration

  • Dossi, Simona|||0000-0002-2212-5934
  • Donaldson, Daniel L.|||0000-0003-3419-3624
  • Little, Kerryn|||0000-0002-8303-5297
  • Pastor Ferrer, Elsa|||0000-0002-2985-3635
Wildfire risk to critical infrastructure is an increasing concern as the frequency and intensity of wildfires continue to increase. Existing research has focused primarily on electrical infrastructure and watershed contamination, leaving other infrastructure sectors comparatively understudied. In this systematic literature review, we analyse the types of infrastructure that have been examined and summarise the methodologies used to characterise wildfire hazard, exposure, and vulnerability across power, water, transport, and highly hazardous industrial infrastructure. This review provides a consolidation of state-of-the-art approaches in the analysis of wildfire risk to critical infrastructure. Key gaps identified include lack of hazard characterisations of non-flame wildfire hazards (smoke and firebrands), limited and asset-focused physical vulnerability analysis and related damage thresholds, poor linkages between regional hazard mapping, and limited consideration of critical infrastructure interdependencies. These gaps directly motivate methodological synergies. For instance, detailed thermal and vulnerability modelling developed for water distribution pipes can be transferred to similar components in other sectors. Dynamic wildfire and smoke models for power and hazardous industrial infrastructure can be extended to sectors currently using static or occurrence-based metrics, and publicly produced regional hazard products could be integrated with sector-specific exposure and vulnerability models to create consistent, multi-scale risk assessments. By systematically comparing risk characterisation approaches across sectors, this review highlights that critical infrastructure systems share sufficient commonalities, vulnerability mechanisms, and spatial scales to enable transfer and adaptation of wildfire risk assessment methodologies. Coordinated development and sharing of hazard, exposure, and vulnerability characterisation tools across sectors and the development of proactive adaptation plans would substantially improve the assessment and management of wildfire risk to critical infrastructure., This research was funded by the Spanish Ministry of Economy and Competitiveness (Grant PID2023-150607OB-I00 by MI- CIU/AEI/10.13039/501100011033 and by ERDF/EU), by the FIREPRIME project (101140381 — FIREPRIME — UCPM-2023-KAPP), and the EPSRC Supergen Energy Networks Hub EP/Y016114/2.
UPCommons. Portal del coneixement obert de la UPC
Publication Artículo científico (JournalArticle)

Assessing roadside wildfire exposure and vulnerability: a case study of the GI-614 to Cadaqués (Catalonia, Spain)

  • Vacca, Pascale|||0000-0001-5863-1030
  • Dossi, Simona|||0000-0002-2212-5934
  • Codina, Martí
  • Planas Cuchi, Eulàlia|||0000-0002-7053-3959
  • Pastor Ferrer, Elsa|||0000-0002-2985-3635
Road networks located in wildfire-prone areas have been highlighted in past wildfire events as particularly vulnerable, especially when they are meant to be used for evacuation. In this paper we present a quantitative methodology for the assessment of the vulnerability of people and vehicles located on a road that is exposed to a wildfire. The approach consists of three steps: first, a qualitative analysis is performed to identify which section of a road is most hazardous; second, wildfire simulations are run to estimate the potential fire behaviour by the selected road segment; third, the fire behaviour characteristics obtained in the second step are used as inputs for FDS simulations to analyse the fire impact on the road. Performance criteria are defined for both vehicles and people to identify their vulnerability under the simulated fire conditions. The methodology is applied to the GI-614 road in Catalonia, Spain, for two wildfire scenarios. Results show that, under worst-case conditions, people would not be able to shelter safely inside their vehicles., This research was partially funded by European Union Civil Protection and Spanish Ministry of Science, Innovation and Universities (Grant GA 101101169 WUITIPS UCPM-2022-PP, Grant GA101140381 FIREPRIME UCPM-2023-KAPP and Grants PID2020-114766RB-100 and PID2023-150607OB-I00 by MICIU/AEI/10.13039/501100011033 and by ERDF/EU). The authors would like to thank the Cadaqués Municipality, Consell Comarcal de l’Alt Empordà, Diputació de Girona, and Bombers de la Generalitat de Catalunya for providing data and insights for the definition of the wildfire scenarios.
UPCommons. Portal del coneixement obert de la UPC
Publication Artículo científico (JournalArticle)

Wildfire natech accidents in the wildland-industrial interface: exposure pathways analysis

  • Dossi, Simona|||0000-0002-2212-5934
  • Pastor Ferrer, Elsa|||0000-0002-2985-3635
  • Agueda Costafreda, Alba|||0000-0001-5021-8014
  • Vacca, Pascale|||0000-0001-5863-1030
  • Planas Cuchi, Eulàlia|||0000-0002-7053-3959
Wildfires are growing more intense, and wildfire-induced industrial accidents and near-misses are increasing. These trends demand dedicated quantitative risk analysis (QRA) for wildfire Natech accidents. This paper assessed wildfire exposure pathways to industrial components through input from two international stakeholder workshops and a fault tree analysis (FTA); the FTA highlights missing models and data to estimate wildfire induced industrial failure. Establishing a wildfire Natech QRA methodology requires wildfire hazard metric models and critical industrial components response tests to the most likely hazard mechanisms. Considering four exposure mechanisms (flame radiation, flame contact, firebrand exposure, and the fire environment), the FTA identifies 30 basic or underdeveloped events that shape impact pathways in chemical industries. The identified events directly indicate the missing models and investigations required to formalise wildfire Natech risk assessments. A case study illustrates the FTA for two industrial components, estimating the fire probability of an external floating roof tank and the loss of containment probability for plastic intermediate bulk containers exposed to normal and extreme wildfire conditions., This research was funded by the Spanish Ministry of Economy and Competitiveness (Grant PID2023-150607OB-I00 by MICIU/AEI/10.13039/501100011033 and by ERDF/EU), and by the FIREPRIME project (101140381 — FIREPRIME — UCPM-2023-KAPP). A. Àgueda is a Serra Húnter Fellow.
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

OpenFOAM simulations of pressurized two phase propane tanks under heat load

  • Papadaki, Artemis
  • Agueda Costafreda, Alba
  • Planas Cuchi, Eulàlia
The exposure of a pressurized tank to an external fire is closely related to the first phase of the Boiling Liquid Expanding Vapor Explosion (BLEVE) accidental scenario. This study investigated the internal pressurization, temperature increase and phase change of two phase propane tanks exposed to fire. CFD simulations, performed in OpenFOAM Foundation software version 11, were validated against four experimental cases. Conjugate heat transfer was considered to model the heat transport from the fire through the tank wall and into the tank content. The governing equations were formulated using the Volume Of Fluid (VoF) approach, and the evaporation and condensation phenomena were approximated by the Lee model. To reduce discretization errors, a mesh sensitivity analysis and the grid convergence index (GCI) method were applied. The simulations were able to capture effectively the pressure and temperature evolution. Overall, the Mean Average Percentage Error (MAPE) of the pressure was lower than 5% in three cases, with one case reaching 8%. For temperature, the MAPE measured at three positions inside the tank was under 6% in three cases, whereas in the remaining case one position showed a value of 17%. Thermal stratification was more evident in the vapor than in the liquid domain. In the liquid domain, stratification was quantified using a dimensionless parameter and the results show agreement with literature, validating the observed thermal behavior. The validated simulations contribute to the use of open-source computational tools in the process safety research field and can be used as a basis for predictive models related to the prevention and mitigation of BLEVE accidents., This work is supported by Joan Oró grant (ref. no 2023 FI-1 00913) at the Universitat Politècnica de Catalunya, Spain. A. Àgueda is a Serra Húnter Fellow. This research was funded by the Spanish Min- istry of Science, Innovation and Universities, Spain (Grant PID2023- 150607OB-I00 by MICIU/AEI/10.13039/501100011033, Spain and by ERDF/EU)., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

Wildfire risk to critical infrastructure: A systematic review highlighting the need for cross-sector collaboration

  • Dossi, Simona
  • Donaldson, Daniel L.
  • Little, Kerryn
  • Pastor Ferrer, Elsa
Wildfire risk to critical infrastructure is an increasing concern as the frequency and intensity of wildfires continue to increase. Existing research has focused primarily on electrical infrastructure and watershed contamination, leaving other infrastructure sectors comparatively understudied. In this systematic literature review, we analyse the types of infrastructure that have been examined and summarise the methodologies used to characterise wildfire hazard, exposure, and vulnerability across power, water, transport, and highly hazardous industrial infrastructure. This review provides a consolidation of state-of-the-art approaches in the analysis of wildfire risk to critical infrastructure. Key gaps identified include lack of hazard characterisations of non-flame wildfire hazards (smoke and firebrands), limited and asset-focused physical vulnerability analysis and related damage thresholds, poor linkages between regional hazard mapping, and limited consideration of critical infrastructure interdependencies. These gaps directly motivate methodological synergies. For instance, detailed thermal and vulnerability modelling developed for water distribution pipes can be transferred to similar components in other sectors. Dynamic wildfire and smoke models for power and hazardous industrial infrastructure can be extended to sectors currently using static or occurrence-based metrics, and publicly produced regional hazard products could be integrated with sector-specific exposure and vulnerability models to create consistent, multi-scale risk assessments. By systematically comparing risk characterisation approaches across sectors, this review highlights that critical infrastructure systems share sufficient commonalities, vulnerability mechanisms, and spatial scales to enable transfer and adaptation of wildfire risk assessment methodologies. Coordinated development and sharing of hazard, exposure, and vulnerability characterisation tools across sectors and the development of proactive adaptation plans would substantially improve the assessment and management of wildfire risk to critical infrastructure., This research was funded by the Spanish Ministry of Economy and Competitiveness (Grant PID2023-150607OB-I00 by MI- CIU/AEI/10.13039/501100011033 and by ERDF/EU), by the FIREPRIME project (101140381 — FIREPRIME — UCPM-2023-KAPP), and the EPSRC Supergen Energy Networks Hub EP/Y016114/2., Postprint (published version)