Skip to main content

ELASTOMEROS TERMOPLASTICOS NANOCELULARES CON CONFINAMIENTO EN LA FASE GASEOSA Y SOLIDA. POLIMEROS CELULARES CON PROPIEDADES FISICAS MEJORADAS.

PID2024-157392OB-I00

•
Funding agency name Agencia Estatal de Investigación
Funding agency acronym AEI
Program Programa Estatal para la Investigación y el Desarrollo Experimental
Subprogram Subprograma Estatal de Generación de Conocimiento Científico-Técnico y Desarrollo Experimental
Call Proyectos de I+D+i (Generación de Conocimiento y Retos Investigación)
Call year 2024
State Plan 2024-2027 Plan Estatal de Investigación Científica y Técnica y de Innovación
Beneficiary centre UNIVERSIDAD DE VALLADOLID

Resultados relacionados

Resultados totales (Incluyendo duplicados): 3
Encontrada(s) 1 página(s)

DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Impact of modulating the molecular weight on the structural features and final properties of PLA aerogels

  • Lledó, Jaime
  • Martín de León, Judith
  • Gómez Álvarez-Arenas, Tomás
  • Rodríguez-Pérez, Miguel Angel
  • Merillas, Beatriz
13 páginas, 13 figuras, 4 tablas, Achieving precise control over structural parameters is crucial for optimizing the performance of bio-based aerogels in energy-related applications. In this work, we investigate the influence of molecular weight and concentration on the development of sustainable polylactic acid (PLA)-based aerogels tailored for thermal insulation. The effects on density, porosity, crystallinity, morphology of the porous structure, mechanical strength, and thermal conductivity were systematically analyzed. It was observed that higher molecular weight PLA can reduce shrinkage during the drying step, leading to lighter aerogels. The relationship between chain mobility (governed by the solution viscosity) and molecular weight was found to be key in governing the microstructure morphology. Sound speed measurements revealed significant variations in the structural factor (g), which are intrinsically associated with the material's solid tortuosity, and thus in the mechanical and thermal properties. The elastic modulus and compressive strength increased by up to 170 % and 63 % in samples with densities of ca. 100 kg/m3 and 140 kg/m3, respectively, when the molecular weight was increased from 138 to 175 kDa. Furthermore, all aerogels maintained low thermal conductivities (~30 mW/m⋅K), and some of them showed values clearly below 30 mW/m⋅K, owing to a reduction in various heat transfer mechanisms resulting from modifications in key structural parameters, such as porosity and pore size. These findings provide a scalable strategy to engineer bio-based, low-density, and mechanically robust PLA aerogels with stable thermal proper- ties, advancing their deployment as sustainable alternatives to fossil-based insulation materials in clean energy and environmental technologies., Financial support from Ministry of Science, Innovation and Univer- sities of Spain and European Regional Development Fund (PID2024- 157392OB-I00), and from Ministry of Science, Innovation and Univer- sities of Spain and European Union NextGenerationEU/PRTR (PDC2025-165502-I00) is gratefully acknowledged, Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Beyond geometrical scaling: structural reorganization governs the mechanical response of nanocellular polymers

  • Martín-de León, J.
  • Gómez Álvarez-Arenas, Tomás
  • Sanchez-Calderón, I.
  • Merillas, Beatriz
  • Rodríguez-Pérez, M. A.
10 páginas, 11 figuras, 1 tabla, Mechanical properties of nanocellular polymers remain under debate, as reported enhancements are not consistently observed across different systems and the underlying mechanisms are not universally established. In this work, air-coupled ultrasonic measurements are employed as a non-destructive technique to extract longi- tudinal and shear wave velocities of polyurethane aerogels, conventional polymers, micro and nanocellular polymethyl methacrylate (PMMA). The work focuses on these last ones, with cell sizes from 4 μm to 14 nm and relative densities between ∼ 0.1 and 0.5, determining not only the longitudinal and shear wave velocities but also the effective elastic moduli and Poisson's ratio of these materials. The results reveal that the mechanical response at the nanoscale deviates from classical geometrical scaling. While microcellular polymers follow the expected density-modulus scaling, nanocellular materials with cell sizes below ∼ 100 nm progressively deviate from this trend. While the ratio between cell wall thickness and cell size increases, as cell size reduces, promoting stiffening, a smaller amount of mass in the vertices and the open cell structure counteracts this effect. As a consequence, elastic modulus increases from values below 10 MPa in aerogels to around 2000 MPa in the stiffest nanocellular structures, although this value is lower than expected from density scaling alone. It is hypothesized that these competing structural mechanisms govern the effective elastic response and explain why nanoscale stiffening cannot be interpreted solely as a pure size effect but rather as a structural reorganization phenomenon. Overall, this work highlights air-coupled ultrasound as a powerful tool to elucidate structure-property relationships in cellular polymers., Financial support Grant PID2024-157392OB-I00 funded by MICIU/ AEI/10.13039/501100011033 and, by “ERDF/EU”. Grant PDC2025- 165502-I00 funded by MICIU/AEI/10.13039/501100011033 and, by the “European Union NextGenerationEU/PRTR”. Financial assistance from Ministerio de Ciencia, Innovaci´on y Uni- versidades (MCIU) (Spain) PTQ2023-013073 (I. Sanchez-Calder´on) is gratefully acknowledged. Authors acknowledges funding from project Listen2Future. Under grant 101096884, Listen2Future is co-funded by the European Union and by the Project Ref. PCI2022-135060-2 funded by CIN/AEI/ 10.13039/501100011033 and by EU “NextGenerationEU”/PRTR. Views and opinions expressed are however those of the author(s) only and do not necessarily reflect those of the European Union or Key Digital Technologies Joint Undertaking. Neither the European Union nor the granting authority can be held responsible for them. The project is supported by the Key Digital Technologies Joint Undertaking and its members (including top-up funding by Austria, Belgium, Czechia, Ger- many, Netherlands, Norway, and Spain). During the preparation of this work, the authors used ChatGPT and Copilot in order to help generate Figs. 8 and 10. After using this tool/ service, the author(s) reviewed and edited the content as needed and take(s) full responsibility for the content of the published article, Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Nanostructure-controlled thermal and acoustic performance in poly(lactic acid) (PLA) aerogels containing clay and graphene-based nanofillers

  • Lledó, Jaime
  • Martín de León, Judith
  • Gómez Álvarez-Arenas, Tomás
  • Rodríguez-Pérez, Miguel A.
  • Merillas, Beatriz
17 páginas, 16 figuras, 1 tabla, Different nanofillers: nanoclays (NC), halloysite nanotubes (HNT), and graphene nanoplatelets (GNP), were added into poly(lactic acid) (PLA) aerogels, and the relationship between the microstructure and mechanical, thermal, and acoustic properties were established. The addition of these fillers resulted in a density increase (25 %) in comparison to pure PLA aerogels, primarily due to higher shrinkage, while maintaining high crystallinity (>59 %). The microstructure was notably influenced by nanoparticle nature, size, and dispersion, leading to variations that significantly affected their final properties. Composites containing GNP exhibited the highest mechanical stiffness, with raw elastic moduli reaching 10.2 MPa (18 % absolute increase with respect to the reference), and also presented the lowest thermal conductivity, down to 26.5 mW/m•K. The acoustic-absorption performance was investigated for the first time. Raw PLA aerogels showed Helmholtz resonator-like behavior, while the composites showed an improved efficiency in sound absorption over a wide frequency range (500–6500 Hz). Specifically, those doped with NC provided the greatest improvement in sound absorption, highlighting their strong potential for advanced acoustic insulation applications. Overall, this study presents an effective strategy for modifying the overall performance of PLA aerogels, providing a path to reach an optimized balance of properties that broadens their potential use., Financial support from Ministry of Science, Innovation and Univer- sities of Spain and European Regional Development Fund (PID2024- 157392OB-I00), and from Ministry of Science, Innovation and Univer- sities of Spain and European Union NextGenerationEU/PRTR (PDC2025-165502-I00) is gratefully acknowledged., Peer reviewed